aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ia64 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-08-25[IA64] Fix __{in,out}s{w,l} to handle unaligned dataJames Bottomley1-4/+6
Some ia64 systems produce several repeats of kernel messages like this: kernel unaligned access to 0xe000000644220466, ip=0xa000000100516fa1 This was tracked to ide code using the __cmd[] field in "struct request" via the __outsw() function. __cmd[] is a char array, so is not guaranteed to be properly aligned when accessed as words. Tested-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-25[IA64] Fix ia64 build failure when CONFIG_SFC=mRobin Holt1-0/+1
CONFIG_SFC=m uses topology_core_siblings() which, for ia64, expects cpu_core_map to be exported. It is not. This patch exports the needed symbol. Maintainers note: This really looks like the wrong thing to do ... it would be much better for the kernel to export an API to provide drivers like this with data they need (which in the case of this driver seems to be an estimate of the effective parallelism available on the platform). But x86 has exported this forever ... so go with the flow until such an API is defined. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-18[IA64] use generic compat_old_sys_readdirChristoph Hellwig3-140/+1
Switch ia64 to the generic compat_sys_old_readdir which is identical except for slightly better error handling. Also remove sys32_getdents which already isn't wired up to the syscall table anymore in favour of compat_sys_getdents. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-18[IA64] pci_acpi_scan_root cleanupLuck, Tony1-10/+11
The code walks all the acpi _CRS methods to see how many windows to allocate. It then scans them all again to insert_resource() for each *even if the first scan found that there were none*. Move the second scan inside the "if (windows)" clause. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-18[IA64] Shrink shadow_flush_counts to a short array to save 8k of per_cpu area.Robin Holt1-4/+4
Making allmodconfig will break the current build. This patch shrinks the per_cpu__shadow_flush_counts from 16k to 8k which frees enough space to allow allmodconfig to successfully complete. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11338 Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-18[IA64] Remove sn2_defconfig.Robin Holt1-1285/+0
Not really a patch as much as a remove this file request. Now that generic_defconfig supports all the configurations SGI currently supports and has NR_CPUS and NR_NODES at our largest configurations, we have no reason to maintain the extra defconfig file. Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-15kexec jump: rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZEHuang Ying1-1/+1
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12[IA64] use bcd2bin/bin2bcdAdrian Bunk1-1/+1
This patch changes ia64 to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-12[IA64] Ensure cpu0 can access per-cpu variables in early boot codeTony Luck6-12/+53
ia64 handles per-cpu variables a litle differently from other architectures in that it maps the physical memory allocated for each cpu at a constant virtual address (0xffffffffffff0000). This mapping is not enabled until the architecture specific cpu_init() function is run, which causes problems since some generic code is run before this point. In particular when CONFIG_PRINTK_TIME is enabled, the boot cpu will trap on the access to per-cpu memory at the first printk() call so the boot will fail without the kernel printing anything to the console. Fix this by allocating percpu memory for cpu0 in the kernel data section and doing all initialization to enable percpu access in head.S before calling any generic code. Other cpus must take care not to access per-cpu variables too early, but their code path from start_secondary() to cpu_init() is all in arch/ia64 Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] Update generic configTony Luck1-4/+67
Changes to support a new platform in my lab. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] Eliminate trailing backquote in IA64_SGI_UVJack Steiner1-2/+2
Eliminate trailing backquote in IA64_SGI_UV config. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] update generic_defconfig to support sn2.Robin Holt1-6/+16
This patch changes the generic_defconfig so it works on all sn2 platforms I have access to. There is only one support configuration which was not tested and that configuration is only a combination of two tested configurations. With this patchset applied, a generic kernel can be booted on either a RHEL 5.2, RHEL5.3, or SLES10 SP1 root and operate. All features needed by SGI's ProPack are also working. I have not tested all features of RHEL or SLES, but they do at least boot. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] update generic_defconfig for 2.6.27-rc1Robin Holt1-210/+293
This patch updates the generic_defconfig for 2.6.27-rc1 by simply doing a make oldconfig and holding down the carriage return. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096Robin Holt1-3/+3
ia64 has compiled with NR_CPUS=4096 for a couple releases, just forgot to update Kconfig to allow it. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] Cleanup generated file not ignored by .gitignoreRobin Holt1-0/+1
arch/ia64/kernel/vmlinux.lds is a generated file. Tell git to ignore it. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-04[IA64] pv_ops: fix ivt.S paravirtualizationIsaku Yamahata1-2/+2
Recent kernels are not booting on some HP systems (though it does boot on others). James and Willy reported the problem. James did the bisection to find the commit that caused the problem: 498c5170472ff0c03a29d22dbd33225a0be038f4. [IA64] pvops: paravirtualize ivt.S Two instructions were wrongly paravirtualized such that _FROM_ macro had been used where _TO_ was intended Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: "Wilcox, Matthew R" <matthew.r.wilcox@intel.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-01[IA64] Move include/asm-ia64 to arch/ia64/include/asmTony Luck192-11/+29374
After moving the the include files there were a few clean-ups: 1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h> 2) Some comments alerted maintainers to look at various header files to make matching updates if certain code were to be changed. Updated these comments to use the new include paths. 3) Some header files mentioned their own names in initial comments. Just deleted these self references. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-30GRU Driver: hardware data structuresJack Steiner1-1/+3
This series of patches adds a driver for the SGI UV GRU. The driver is still in development but it currently compiles for both x86_64 & IA64. All simple regression tests pass on IA64. Although features remain to be added, I'd like to start the process of getting the driver into the kernel. Additional kernel drivers will depend on services provide by the GRU driver. The GRU is a hardware resource located in the system chipset. The GRU contains memory that is mmaped into the user address space. This memory is used to communicate with the GRU to perform functions such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user instructions using user virtual addresses. GRU instructions (ex., bcopy) use user virtual addresses for operands. The GRU contains a large TLB that is functionally very similar to processor TLBs. Because the external contains a TLB with user virtual address, it requires callouts from the core VM system when certain types of changes are made to the process page tables. There are several MMUOPS patches currently being discussed but none has been accepted into the kernel. The GRU driver is built using version V18 from Andrea Arcangeli. This patch: Contains the definitions of the hardware GRU data structures that are used by the driver to manage the GRU. [akpm@linux-foundation;org: export hpage_shift] Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27KVM: ia64: Fix irq disabling leak in error handling codeJulia Lawall1-2/+3
There is a call to local_irq_restore in the normal exit case, so it would seem that there should be one on an error return as well. The semantic patch that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; expression E,E1,E2; @@ local_irq_save(l); ... when != local_irq_restore(l) when != spin_unlock_irqrestore(E,l) when any when strict ( if (...) { ... when != local_irq_restore(l) when != spin_unlock_irqrestore(E1,l) + local_irq_restore(l); return ...; } | if (...) + {local_irq_restore(l); return ...; + } | spin_unlock_irqrestore(E2,l); | local_irq_restore(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-26tracehook: wait_task_inactiveRoland McGrath1-2/+2
This extends wait_task_inactive() with a new argument so it can be used in a "soft" mode where it will check for the task changing state unexpectedly and back off. There is no change to existing callers. This lays the groundwork to allow robust, noninvasive tracing that can try to sample a blocked thread but back off safely if it wakes up. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori3-4/+5
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds1-0/+6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Wire up new system calls
2008-07-25kprobes: improve kretprobe scalability with hashed lockingSrinivasa D S1-4/+2
Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25[IA64] Wire up new system callsTony Luck1-0/+6
Six new system calls: signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-24flag parameters: pipeUlrich Drepper2-2/+2
This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24bootmem: replace node_boot_start in struct bootmem_dataJohannes Weiner1-9/+10
Almost all users of this field need a PFN instead of a physical address, so replace node_boot_start with node_min_pfn. [Lee.Schermerhorn@hp.com: fix spurious BUG_ON() in mark_bootmem()] Signed-off-by: Johannes Weiner <hannes@saeureba.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24hugetlb: introduce pud_hugeAndi Kleen1-0/+6
Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24hugetlb: modular state for hugetlb page sizeAndi Kleen1-3/+4
The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by: Adam Litke <agl@us.ibm.com> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mm: remove double indirection on tlb parameter to free_pgd_range() & CoJan Beulich1-1/+1
The double indirection here is not needed anywhere and hence (at least) confusing. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mm: move bootmem descriptors definition to a single placeJohannes Weiner1-6/+5
There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-21sysdev: Pass the attribute to the low level sysdev show/store functionAndi Kleen1-7/+15
This allow to dynamically generate attributes and share show/store functions between attributes. Right now most attributes are generated by special macros and lots of duplicated code. With the attribute passed it's instead possible to attach some data to the attribute and then use that in shared low level functions to do different things. I need this for the dynamically generated bank attributes in the x86 machine check code, but it'll allow some further cleanups. I converted all users in tree to the new show/store prototype. It's a single huge patch to avoid unbisectable sections. Runtime tested: x86-32, x86-64 Compiled only: ia64, powerpc Not compile tested/only grep converted: sh, arm, avr32 Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds20-311/+968
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (25 commits) mmtimer: Push BKL down into the ioctl handler [IA64] Remove experimental status of kdump [IA64] Update ia64 mmr list for SGI uv [IA64] Avoid overflowing ia64_cpu_to_sapicid in acpi_map_lsapic() [IA64] adding parameter check to module_free() [IA64] improper printk format in acpi-cpufreq [IA64] pv_ops: move some functions in ivt.S to avoid lack of space. [IA64] pvops: documentation on ia64/pv_ops [IA64] pvops: add to hooks, pv_time_ops, for steal time accounting. [IA64] pvops: add hooks, pv_irq_ops, to paravirtualized irq related operations. [IA64] pvops: add hooks, pv_iosapic_ops, to paravirtualize iosapic. [IA64] pvops: define initialization hooks, pv_init_ops, for paravirtualized environment. [IA64] pvops: paravirtualize NR_IRQS [IA64] pvops: paravirtualize entry.S [IA64] pvops: paravirtualize ivt.S [IA64] pvops: paravirtualize minstate.h. [IA64] pvops: define paravirtualized instructions for native. [IA64] pvops: preparation for paravirtulization of hand written assembly code. [IA64] pvops: introduce pv_cpu_ops to paravirtualize privileged instructions. [IA64] pvops: add an early setup hook for pv_ops. ...
2008-07-20Merge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds2-12/+11
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (70 commits) KVM: Adjust smp_call_function_mask() callers to new requirements KVM: MMU: Fix potential race setting upper shadow ptes on nonpae hosts KVM: x86 emulator: emulate clflush KVM: MMU: improve invalid shadow root page handling KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destruction KVM: Prefix some x86 low level function with kvm_, to avoid namespace issues KVM: check injected pic irq within valid pic irqs KVM: x86 emulator: Fix HLT instruction KVM: Apply the kernel sigmask to vcpus blocked due to being uninitialized KVM: VMX: Add ept_sync_context in flush_tlb KVM: mmu_shrink: kvm_mmu_zap_page requires slots_lock to be held x86: KVM guest: make kvm_smp_prepare_boot_cpu() static KVM: SVM: fix suspend/resume support KVM: s390: rename private structures KVM: s390: Set guest storage limit and offset to sane values KVM: Fix memory leak on guest exit KVM: s390: dont allocate dirty bitmap KVM: move slots_lock acquision down to vapic_exit KVM: VMX: Fake emulate Intel perfctr MSRs KVM: VMX: Fix a wrong usage of vmcs_config ...
2008-07-20simserial: Fix up for ldisc changesAlan Cox1-43/+3
Noted by Tony Luck although I've done the patches differently and also removed some other bogus oddments. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destructionMarcelo Tosatti1-0/+3
Flush the shadow mmu before removing regions to avoid stale entries. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Add coalesced MMIO support (ia64 part)Laurent Vivier2-1/+5
This patch enables coalesced MMIO for ia64 architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. [akpm: fix compile error on ia64] Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: kvm_io_device: extend in_range() to manage len and write attributeLaurent Vivier1-3/+3
Modify member in_range() of structure kvm_io_device to pass length and the type of the I/O (write or read). This modification allows to use kvm_io_device with coalesced MMIO. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-20KVM: Remove decache_vcpus_on_cpu() and related callbacksAvi Kivity1-8/+0
Obsoleted by the vmx-specific per-cpu list. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-07-17[IA64] Remove experimental status of kdumpBernhard Walle1-2/+2
This patch removes the experimental status of kdump on IA64. kdump is on IA64 now since more than one year and it has proven to be stable. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-17[IA64] Avoid overflowing ia64_cpu_to_sapicid in acpi_map_lsapic()Alex Chiang1-3/+2
acpi_map_lsapic tries to stuff a long into ia64_cpu_to_sapicid[], which can only hold ints, so let's fix that. We need to update the signature of acpi_map_cpu2node() too. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-17 [IA64] adding parameter check to module_free()Akiyama, Nobuyuki1-1/+2
module_free() refers the first parameter before checking. But it is called like below(in kernel/kprobes). The first parameter is always NULL. This happens when many probe points(>1024) are set by kprobes. I encountered this with using SystemTap. It can set many probes easily. static int __kprobes collect_one_slot(struct kprobe_insn_page *kip, int idx) { ... if (kip->nused == 0) { hlist_del(&kip->hlist); if (hlist_empty(&kprobe_insn_pages)) { ... } else { module_free(NULL, kip->insns); //<<< 1st param always NULL kfree(kip); } return 1; } return 0; } Signed-off-by: Akiyama, Nobuyuki <akiyama.nobuyuk@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-17[IA64] improper printk format in acpi-cpufreqDenis V. Lunev1-2/+2
When dprintk is enabled the following warnings are generated: arch/ia64/kernel/cpufreq/acpi-cpufreq.c: In function 'processor_set_pstate': arch/ia64/kernel/cpufreq/acpi-cpufreq.c:54: warning: format '%x' expects type 'unsigned int', but argumen t 3 has type 's64' arch/ia64/kernel/cpufreq/acpi-cpufreq.c: In function 'processor_get_pstate': arch/ia64/kernel/cpufreq/acpi-cpufreq.c:76: warning: format '%x' expects type 'unsigned int', but argumen t 2 has type 's64' Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-17Pull pvops into release branchTony Luck16-303/+960
2008-07-17fix build error of arch/ia64/kvm/*Takashi Iwai2-3/+3
Fix calls of smp_call_function*() in arch/ia64/kvm for recent API changes. CC [M] arch/ia64/kvm/kvm-ia64.o arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge': arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single' arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick': arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single' Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16ACPI : Create "idle=nomwait" bootparamZhao Yakui1-0/+2
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16ACPI: Create "idle=halt" bootparamZhao Yakui1-0/+2
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-15Merge branch 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds9-254/+30
* 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits) generic-ipi: more merge fallout generic-ipi: merge fix x86, visws: use mach-default/entry_arch.h x86, visws: fix generic-ipi build generic-ipi: fixlet generic-ipi: fix s390 build bug generic-ipi: fix linux-next tree build failure fix: "smp_call_function: get rid of the unused nonatomic/retry argument" fix: "smp_call_function: get rid of the unused nonatomic/retry argument" fix "smp_call_function: get rid of the unused nonatomic/retry argument" on_each_cpu(): kill unused 'retry' parameter smp_call_function: get rid of the unused nonatomic/retry argument sh: convert to generic helpers for IPI function calls parisc: convert to generic helpers for IPI function calls mips: convert to generic helpers for IPI function calls m32r: convert to generic helpers for IPI function calls arm: convert to generic helpers for IPI function calls alpha: convert to generic helpers for IPI function calls ia64: convert to generic helpers for IPI function calls powerpc: convert to generic helpers for IPI function calls ... Fix trivial conflicts due to rcu updates in kernel/rcupdate.c manually
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar9-254/+30
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11Merge branch 'linus' into core/rcuIngo Molnar2-1/+3
Conflicts: include/linux/rculist.h kernel/rcupreempt.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-30[IA64] export account_system_vtimeDoug Chapman1-0/+1
The symbol account_system_vtime is used by the kvm module but not exported. This breaks building with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_KVM=m. Signed-off-by: Doug Chapman <doug.chapman@hp.com> Acked-by: Hidetosho Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>