aboutsummaryrefslogtreecommitdiffstats
path: root/arch/m68k/kernel/entry.S (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-09-24m68k: Remove set_fs()Christoph Hellwig1-3/+2
Add a m68k-only set_fc helper to set the SFC and DFC registers for the few places that need to override it for special MM operations, but disconnect that from the deprecated kernel-wide set_fs() API. Note that the SFC/DFC registers are context switched, so there is no need to disable preemption. Partially based on an earlier patch from Linus Torvalds <torvalds@linux-foundation.org>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-09-24m68k: Leave stack mangling to asm wrapper of sigreturn()Al Viro1-29/+26
sigreturn has to deal with an unpleasant problem - exception stack frames have different sizes, depending upon the exception (and processor model, as well) and variable-sized part of exception frame may contain information needed for instruction restart. So when signal handler terminates and calls sigreturn to resume the execution at the place where we'd been when we caught the signal, it has to rearrange the frame at the bottom of kernel stack. Worse, it might need to open a gap in the kernel stack, shifting pt_regs towards lower addresses. Doing that from C is insane - we'd need to shift stack frames (return addresses, local variables, etc.) of C call chain, right under the nose of compiler and hope it won't fall apart horribly. What had been actually done is only slightly less insane - an inline asm in mangle_kernel_stack() moved the stuff around, then reset stack pointer and jumped to label in asm glue. However, we can avoid all that mess if the asm wrapper we have to use anyway would reserve some space on the stack between switch_stack and the C stack frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs + switch_stack, memcpy() the variable part of exception frame into the opened gap - all of that without inline asm, buggering C call chain, magical jumps to asm labels, etc. Asm wrapper would need to know where the moved switch_stack has ended up - it might have been shifted into the gap we'd reserved before do_rt_sigreturn() call. That's where it needs to set the stack pointer to. So let the C part return just that and be done with that. While we are at it, the call of berr_040cleanup() we need to do when returning via 68040 bus error exception frame can be moved into C part as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-09-24m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signalAl Viro1-0/+2
We get there when sigreturn has performed obscene acts on kernel stack; in particular, the location of pt_regs has shifted. We are about to call syscall_trace(), which might stop for tracer. If that happens, we'd better have task_pt_regs() returning correct result... Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: bd6f56a75bb2 ("m68k: Missing syscall_trace() on sigreturn") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-01-12m68k: Wire up clone3() syscallKars de Jong1-0/+7
Wire up the clone3() syscall for m68k. The special entry point is done in assembler as was done for clone() as well. This is needed because all registers need to be saved. The C wrapper then calls the generic sys_clone3() with the correct arguments. Tested on A1200 using the simple test program from: https://lore.kernel.org/lkml/20190716130631.tohj4ub54md25dys@brauner.io/ Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Link: https://lore.kernel.org/r/20191124195225.31230-1-jongk@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-02-29m68k: Use conventional function parameters for do_sigreturnGreg Ungerer1-0/+6
Create conventional stack parameters for the calls to do_sigreturn and do_rt_sigreturn. The current C code for do_sigreturn and do_rt_sigreturn dig into the stack to create local pointers to the saved switch stack and the pt_regs structs. The motivation for this change is a problem with non-MMU targets that have broken signal return paths on newer versions of gcc. It appears as though gcc has determined that the pointers into the saved stack structs, and the saved structs themselves, are function parameters and updates to them will be lost on function return, so they are optimized away. This results in large parts of restore_sigcontext() and mangle_kernel_stack() functions being removed. Of course this results in non-functional code causing kernel oops. This problem has been observed with gcc version 5.2 and 5.3, and probably exists in earlier versions as well. Using conventional stack parameter pointers passed to these functions has the advantage of the code here not needing to know the exact details of how the underlying entry handler layed these structs out on the stack. So the rather ugly pointer setup casting and arg referencing can be removed. The resulting code after this change is a few bytes larger (due to the overhead of creating the stack args and their tear down). Not being hot paths I don't think this is too much of a problem here. An alternative solution is to put a barrier() in the do_sigreturn() code, but this doesn't feel quite as clean as this solution. This change has been compile tested on all defconfigs, and run tested on Atari (through aranym), ColdFire with MMU (M5407EVB) and ColdFire with no-MMU (QEMU and M5208EVB). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-11-13m68k: Simplify low level interrupt handling codeThomas Gleixner1-36/+4
The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2012-11-28m68k: sanitize copy_thread(), fork/vfork/clone wrappers, switch to generic fork/vforkAl Viro1-14/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-17m68k: switch to saner kernel_execve() semanticsAl Viro1-7/+0
Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01m68k: switch to generic sys_execve()/kernel_execve()Al Viro1-0/+5
The tricky part here is that task_pt_regs() on m68k works *only* for process inside do_signal(). However, we need something much simpler - pt_regs of a process inside do_signal() may be at different offsets from the stack bottom, depending on the way we'd entered the kernel, but for a task inside sys_execve() it *is* at constant offset. Moreover, for a kernel thread about to become a userland process the same location is also fine - setting sp to that will leave the kernel stack pointer at the very bottom of the kernel stack when we finally switch to userland. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-01m68k: split ret_from_fork(), simplify kernel_thread()Al Viro1-0/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-16m68k: merge the MMU and non-MMU versions of the entry.S codeGreg Ungerer1-3/+449
Some of the entry.S code is common to both MMU and non-MMU builds. So merge the entry_no.S and entry_mm.S files back into a single file. With a little code movement we only need a single #ifdef. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: use non-MMU entry.S code when compiling for ColdFire CPUGreg Ungerer1-1/+1
No matter whether we are configured for non-MMU or MMU enabled if we are compiling for ColdFire CPU we always use the entry_no.S code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-03-25m68k: merge m68k and m68knommu arch directoriesGreg Ungerer1-752/+4
There is a lot of common code that could be shared between the m68k and m68knommu arch branches. It makes sense to merge the two branches into a single directory structure so that we can more easily share that common code. This is a brute force merge, based on a script from Stephen King <sfking@fdwdc.com>, which was originally written by Arnd Bergmann <arnd@arndb.de>. > The script was inspired by the script Sam Ravnborg used to merge the > includes from m68knommu. For those files common to both arches but > differing in content, the m68k version of the file is renamed to > <file>_mm.<ext> and the m68knommu version of the file is moved into the > corresponding m68k directory and renamed <file>_no.<ext> and a small > wrapper file <file>.<ext> is used to select between the two version. Files > that are common to both but don't differ are removed from the m68knommu > tree and files and directories that are unique to the m68knommu tree are > moved to the m68k tree. Finally, the arch/m68knommu tree is removed. > > To select between the the versions of the files, the wrapper uses > > #ifdef CONFIG_MMU > #include <file>_mm.<ext> > #else > #include <file>_no.<ext> > #endif On top of this file merge I have done a simplistic merge of m68k and m68knommu Kconfig, which primarily attempts to keep existing options and menus in place. Other than a handful of options being moved it produces identical .config outputs on m68k and m68knommu targets I tested it on. With this in place there is now quite a bit of scope for merge cleanups in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-07m68k: Missing syscall_trace() on sigreturnAl Viro1-1/+4
If we leave sigreturn via ret_from_signal, we end up with syscall trace only on entry, leading to very unhappy strace, among other things. Note that this means different behaviours for signals delivered while we were in pagefault and for ones delivered while we were in interrupt... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Simplify the singlestepping handling in signalsAl Viro1-5/+1
Instead of checking the return value of do_signal() we can just do the work (raise SIGTRAP and clear SR.T1) directly in handle_signal(), when setting the sigframe up. Simplifies the assembler glue and is closer to the way we do it on other targets. Note that do_delayed_trace does *not* disappear; it's still needed to deal with single-stepping through syscall, since 68040 doesn't raise the trace exception at all if the trap exception is pending. We hit it after returning from sys_...() if TIF_DELAYED_TRACE is set; all that has changed is that we don't reuse it for "single-step into the handler" codepath. As the result, do_signal() doesn't need to return anything anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Switch to saner sigsuspend()Al Viro1-18/+1
and saner do_signal() arguments, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-09-13m68k,m68knommu: Wire up fanotify_init, fanotify_mark, and prlimit64Geert Uytterhoeven1-0/+3
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2010-03-12Add generic sys_old_mmap()Christoph Hellwig1-1/+1
Add a generic implementation of the old mmap() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12Add generic sys_old_select()Christoph Hellwig1-1/+1
Add a generic implementation of the old select() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Acked-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-27m68k: Add NPTL supportMaxim Kuvyrkov1-0/+4
This patch adds several syscalls, that provide necessary functionality to support NPTL on m68k/ColdFire. The syscalls are get_thread_area, set_thread_area, atomic_cmpxchg_32 and atomic_barrier. The cmpxchg syscall is required for ColdFire as it doesn't support 'cas' instruction. Also a ptrace call PTRACE_GET_THREAD_AREA is added to allow debugger to inspect the TLS storage. Signed-off-by: Maxim Kuvyrkov <maxim@codesourcery.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-12-04m68k: ptrace fixesAndreas Schwab1-1/+5
This fixes the following issues in ptrace: - when single stepping into the signal handler stop at the first insn of the handler - handle non-zero stkadj when accessing pc and sr in ptregs - correctly handle PT_SR in PTRACE_POKEUSR - report -EIO when trying to read unknown offset in PTRACE_PEEKUSR Additionally, the handling of the special case that PT_SR accesses a 16 bit word instead of a 32 bit word has been moved into get_reg/put_reg. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar1-1/+1
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31locking, m68k/asm-offsets: Rename pt_regs offset definesHeiko Carstens1-11/+11
In order to be able to use asm-offsets.h in C files the existing namespace conflicts must be solved first. In asm-offsets.h e.g. PT_D0 gets defined which is the offset of the d0 member of the pt_regs structure. However a same define (with a different meaning) exists in asm/ptregs.h. So rename the defines created with the asm-offset mechanism to PT_OFF_D0 etc. There also already exist a few defines with these names that have the same meaning. So remove the existing defines and use the asm-offset generated ones. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Horst Hartmann <horsth@linux.vnet.ibm.com> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <20090831124416.666403991@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-26m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_openGeert Uytterhoeven1-0/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22m68k,m68knommu: Wire up preadv and pwritevGeert Uytterhoeven1-0/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2009-01-14[CVE-2009-0029] Rename old_readdir to sys_old_readdirHeiko Carstens1-1/+1
This way it matches the generic system call name convention. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-12m68k: Wire up sys_restart_syscallAndreas Schwab1-1/+1
Make restart blocks working, required for proper syscall restarting. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-08-11m68k{,nommu}: Wire up new system callsGeert Uytterhoeven1-0/+6
Wire up for m68k{,nommu} the system calls that were added in the last merge window: - 4006553b06306b34054529477b06b68a1c66249b ("flag parameters: inotify_init") - ed8cae8ba01348bfd83333f4648dd807b04d7f08 ("flag parameters: pipe") - 336dd1f70ff62d7dd8655228caed4c5bfc818c56 ("flag parameters: dup2") - a0998b50c3f0b8fdd265c63e0032f86ebe377dbf ("flag parameters: epoll_create") - 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 ("flag parameters add-on: remove epoll_create size param") - b087498eb5605673b0f260a7620d91818cd72304 ("flag parameters: eventfd") - 9deb27baedb79759c3ab9435a7d8b841842d56e9 ("flag parameters: signalfd") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04m68k{,nommu}: Wire up new timerfd syscallsGeert Uytterhoeven1-1/+3
m68k{,nommu}: Wire up the new timerfd syscalls, which were introduced in commit 4d672e7ac79b5ec5cdc90e450823441e20464691 ("timerfd: new timerfd API"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05timerfd: new timerfd APIDavide Libenzi1-1/+1
This is the new timerfd API as it is implemented by the following patch: int timerfd_create(int clockid, int flags); int timerfd_settime(int ufd, int flags, const struct itimerspec *utmr, struct itimerspec *otmr); int timerfd_gettime(int ufd, struct itimerspec *otmr); The timerfd_create() API creates an un-programmed timerfd fd. The "clockid" parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME. The timerfd_settime() API give new settings by the timerfd fd, by optionally retrieving the previous expiration time (in case the "otmr" parameter is not NULL). The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit is set in the "flags" parameter. Otherwise it's a relative time. The timerfd_gettime() API returns the next expiration time of the timer, or {0, 0} if the timerfd has not been set yet. Like the previous timerfd API implementation, read(2) and poll(2) are supported (with the same interface). Here's a simple test program I used to exercise the new timerfd APIs: http://www.xmailserver.org/timerfd-test2.c [akpm@linux-foundation.org: coding-style cleanups] [akpm@linux-foundation.org: fix ia64 build] [akpm@linux-foundation.org: fix m68k build] [akpm@linux-foundation.org: fix mips build] [akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds] [heiko.carstens@de.ibm.com: fix s390] [akpm@linux-foundation.org: fix powerpc build] [akpm@linux-foundation.org: fix sparc64 more] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11m68k(nommu): add missing syscallsGeert Uytterhoeven1-0/+10
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: reformat various m68k filesRoman Zippel1-1/+1
Reformat various m68k files, so they actually look like Linux sources. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-09[PATCH] m68k: more syscall updatesGeert Uytterhoeven1-0/+24
Add missing syscalls Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09[PATCH] m68k: syscall updatesGeert Uytterhoeven1-0/+5
Add some missing system calls (recent udev needs them) Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-07[PATCH] m68k pt_regs fixesAl Viro1-2/+2
m68k_handle_int() split in two functions: __m68k_handle_int() takes pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs *. Places where we used to call m68k_handle_int() recursively with the same pt_regs have simply lost the second argument, the rest is switched to __m68k_handle_int(). The rest of patch is just dropping pt_regs * where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25[PATCH] m68k: convert q40 irq codeRoman Zippel1-10/+1
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: convert generic irq code to irq controllerRoman Zippel1-3/+8
Convert the generic irq code to use irq controller, this gets rid of the machine specific callbacks and gives better control over irq handling without duplicating lots of code. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: separate handler for auto and user vector interruptRoman Zippel1-42/+42
Use separate entry points for auto and user vector interrupts and cleanup naming a little. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] m68k: adjust to changed HARDIRQ_MASKRoman Zippel1-2/+2
Adjust entry.S to the changed HARDIRQ_MASK, add a check to prevent it from silently breaking again. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] m68k: convert thread flags to use bit fieldsRoman Zippel1-38/+40
Remove task_work structure, use the standard thread flags functions and use shifts in entry.S to test the thread flags. Add a few local labels to entry.S to allow gas to generate short jumps. Finally it changes a number of inline functions in thread_info.h to macros to delay the current_thread_info() usage, which requires on m68k a structure (task_struct) not yet defined at this point. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h supportSam Ravnborg1-1/+1
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+712
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.