aboutsummaryrefslogtreecommitdiffstats
path: root/arch/microblaze/kernel/process.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-05-09microblaze: Enable IRQ in arch_cpu_idleMichal Simek1-0/+5
Microblaze requires to enable IRQ in cpu_idle loop. It should be the part of this patch: "microblaze: Use generic idle loop" (sha1: e962bb9e9cf73b8c8893c95903e791dd5ec19fb4) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-30dump_stack: unify debug information printed by show_regs()Tejun Heo1-0/+2
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-08microblaze: Use generic idle loopThomas Gleixner1-53/+0
The microblaze idle loop provides a polling and a non polling version, which are suprisingly both polling, just with slightly different instrumentation. Remove them and use the generic poller. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Link: http://lkml.kernel.org/r/20130321215234.687590459@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08arch: Cleanup enable/disable_hltThomas Gleixner1-12/+0
enable/disable_hlt() does not need to be exported and can be killed on architectures which do not use it at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130321215233.377959540@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-26Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-12/+12
Pull microblaze update from Michal Simek: "Microblaze changes. After my discussion with Arnd I have also added there asm-generic io patch which is Acked by him and Geert." * 'next' of git://git.monstr.eu/linux-2.6-microblaze: asm-generic: io: Fix ioread16/32be and iowrite16/32be microblaze: Do not use module.h in files which are not modules microblaze: Fix coding style issues microblaze: Add missing return from debugfs_tlb microblaze: Makefile clean microblaze: Add .gitignore entries for auto-generated files microblaze: Fix strncpy_from_user macro
2013-02-23microblaze idle: Fix compile errorLars-Peter Clausen1-4/+1
Commit def8203 ("microblaze idle: delete pm_idle") introduced the following compile error: arch/microblaze/kernel/process.c: In function 'cpu_idle': arch/microblaze/kernel/process.c:100: error: 'idle' undeclared (first use in this function) arch/microblaze/kernel/process.c:100: error: (Each undeclared identifier is reported only once arch/microblaze/kernel/process.c:100: error: for each function it appears in.) arch/microblaze/kernel/process.c:106: error: implicit declaration of function 'idle' This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-17microblaze idle: delete pm_idleLen Brown1-3/+0
pm_idle on microblaze served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: microblaze-uclinux@itee.uq.edu.au
2013-02-12microblaze: Do not use module.h in files which are not modulesMichal Simek1-1/+1
Based on the patch: "lib: reduce the use of module.h wherever possible" (sha1: 8bc3bcc93a2b4e47d5d410146f6546bca6171663) fix all microblaze files which are not modules. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Fix coding style issuesMichal Simek1-11/+11
Fix coding style issues reported by checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-12-13microblaze: Remove BIP from childregsMichal Simek1-1/+0
Not necessary to use BIP for protection. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28microblaze: switch to generic fork/vfork/cloneAl Viro1-3/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16microblaze: switch to generic kernel_execve()Al Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16microblaze: switch to generic kernel_thread()Al Viro1-51/+20
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-05-25microblaze: Setup correct pointer to TLS areaEdgar E. Iglesias1-1/+5
Setup a pointer to the TLS area in copy_thread. r10 is 6th argumetn which contains TLS area. And r21 is the thread reg. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: David Holsgrove <david.holsgrove@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-28Disintegrate asm/system.h for MicroblazeDavid Howells1-1/+0
Disintegrate asm/system.h for Microblaze. Not compiled. Signed-off-by: David Howells <dhowells@redhat.com> cc: microblaze-uclinux@itee.uq.edu.au
2012-03-01sched/rt: Use schedule_preempt_disabled()Thomas Gleixner1-3/+1
Coccinelle based conversion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-11nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()Frederic Weisbecker1-2/+4
Those two APIs were provided to optimize the calls of tick_nohz_idle_enter() and rcu_idle_enter() into a single irq disabled section. This way no interrupt happening in-between would needlessly process any RCU job. Now we are talking about an optimization for which benefits have yet to be measured. Let's start simple and completely decouple idle rcu and dyntick idle logics to simplify. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11nohz: Allow rcu extended quiescent state handling seperately from tick stopFrederic Weisbecker1-2/+2
It is assumed that rcu won't be used once we switch to tickless mode and until we restart the tick. However this is not always true, as in x86-64 where we dereference the idle notifiers after the tick is stopped. To prepare for fixing this, add two new APIs: tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu(). If no use of RCU is made in the idle loop between tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch must instead call the new *_norcu() version such that the arch doesn't need to call rcu_idle_enter() and rcu_idle_exit(). Otherwise the arch must call tick_nohz_enter_idle() and tick_nohz_exit_idle() and also call explicitly: - rcu_idle_enter() after its last use of RCU before the CPU is put to sleep. - rcu_idle_exit() before the first use of RCU after the CPU is woken up. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11nohz: Separate out irq exit and idle loop dyntick logicFrederic Weisbecker1-2/+2
The tick_nohz_stop_sched_tick() function, which tries to delay the next timer tick as long as possible, can be called from two places: - From the idle loop to start the dytick idle mode - From interrupt exit if we have interrupted the dyntick idle mode, so that we reprogram the next tick event in case the irq changed some internal state that requires this action. There are only few minor differences between both that are handled by that function, driven by the ts->inidle cpu variable and the inidle parameter. The whole guarantees that we only update the dyntick mode on irq exit if we actually interrupted the dyntick idle mode, and that we enter in RCU extended quiescent state from idle loop entry only. Split this function into: - tick_nohz_idle_enter(), which sets ts->inidle to 1, enters dynticks idle mode unconditionally if it can, and enters into RCU extended quiescent state. - tick_nohz_irq_exit() which only updates the dynticks idle mode when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called). To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed into tick_nohz_idle_exit(). This simplifies the code and micro-optimize the irq exit path (no need for local_irq_save there). This also prepares for the split between dynticks and rcu extended quiescent state logics. We'll need this split to further fix illegal uses of RCU in extended quiescent states in the idle loop. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-10-14microblaze: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW usagePeter Zijlstra1-0/+1
As far as I can tell the only reason microblaze has __ARCH_WANT_INTERRUPTS_ON_CTXSW is because it initializes new task state with interrupts enabled so that on switch_to() interrupts get enabled. So change copy_thread() to clear MSR_IE instead of set it, this will ensure switch_to() will always keep IRQs disabled. The scheduler will disable IRQs when taking rq->lock in schedule() and enable IRQs in finish_lock_switch() after its done its magic. This leaves ARM the only __ARCH_WANT_INTERRUPTS_ON_CTXSW user. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: exec: Remove redundant set_fs(USER_DS)Mathias Krause1-1/+0
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com>
2011-03-09microblaze: Remove r0_ram pointer and PTO alignmentMichal Simek1-1/+1
r0_ram pool was used for saving/restoring register content if hw exception happen. This poll was replaced by pt_pool_space with PT_SIZE size. Based on this change SAVE_STATE_ARG_SPACE was removed which caused that PTO offset is zero that's why is also removed. r0_ram space was used as scratchpad by v850. In early Microblaze Linux developing phase was this part of code blindly copied. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04microblaze: Do not trace cpu_relax functionMichal Simek1-2/+5
IRQsoff tracer requires to protect cpu_idle function to get correct timing report. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Adding likely macrosMichal Simek1-4/+5
On the base on GCOV analytics is helpful to add likely/unlikely macros. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Remove segment.hMichal Simek1-0/+1
I would like to use asm-generic uaccess.h where are segment macros defined. This is just first step. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Move cache macro from cache.h to cacheflush.hMichal Simek1-0/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05microblaze: UMS is used only for MMU kernelMichal Simek1-0/+2
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-22microblaze: Ensure CPU usermode is set on new userspace processesJohn Williams1-0/+1
Signed-off-by: John Williams <john.williams@petalogix.com>
2009-05-26microblaze_mmu_v2: Update process creation for MMUMichal Simek1-0/+58
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21microblaze: export some symbolsArnd Bergmann1-0/+1
Some device drivers require the symbols _ebss, kernel_thread, __page_offset or ___range_ok, so export them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove redundant variableMichal Simek1-4/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Move start_thread to process.cMichal Simek1-0/+9
This change is due to upcomming MMU merge Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Rename kernel_mode to pt_mode in pt_regsMichal Simek1-2/+2
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Remove while(1) loop from show_regs functionMichal Simek1-2/+0
I removed it because of show_regs can't break die function. If process/kernel failed, die (do_exit) function resolve it. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-14microblaze: Simplify copy_thread()Michal Simek1-2/+1
Removing nr parameter from copy_tread function commit 6f2c55b843836d26528c56a0968689accaedbc67 Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: process and init task functionMichal Simek1-0/+187
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.