aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/ath79 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-29MIPS: Convert to using %pOF instead of full_nameRob Herring1-5/+4
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16783/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-05-23gpio: pcf857x: move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-14MIPS: Audit and remove any unnecessary uses of module.hPaul Gortmaker2-2/+1
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-01-25mips: ath79: clock:- Unmap region obtained by of_iomapArvind Yadav1-2/+5
Free memory mapping, if ath79_clocks_init_dt_ng is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Fixes: 3bdf1071ba7d ("MIPS: ath79: update devicetree clock support for AR9132") Cc: antonynpavlov@gmail.com Cc: albeu@free.fr Cc: hackpascal@gmail.com Cc: sboyd@codeaurora.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14915/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: ath79: Fix error handlingChristophe JAILLET1-1/+1
'clk_register_fixed_rate()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Aban Bedel <albeu@free.fr> Cc: antonynpavlov@gmail.com Cc: hackpascal@gmail.com Cc: amitoj1606@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-13MIPS: ath79: Fix test for error return of clk_register_fixed_factor().Amitoj Kaur Chawla1-1/+1
clk_register_fixed_factor returns an ERR_PTR in case of an error and should have an IS_ERR check instead of a null check. The Coccinelle semantic patch used to find this issue is as follows: @@ expression e; statement S; @@ *e = clk_register_fixed_factor(...); if (!e) S Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Cc: julia.lawall@lip6.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-2/+2
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ...
2016-08-02MIPS: store the appended dtb address in a variableJonas Gorski1-2/+2
Instead of rewriting the arguments to match the UHI spec, store the address of a appended or UHI supplied dtb in fw_supplied_dtb. That way the original bootloader arugments are kept intact while still making the use of an appended dtb invisible for mach code. Mach code can still find out if it is an appended dtb by comparing fw_arg1 with fw_supplied_dtb. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: John Crispin <john@phrozen.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alban Bedel <albeu@free.fr> Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-25MIPS: ath79: Add missing include fileGuenter Roeck1-0/+1
Commit ddd0ce87bfde ("mips: Remove unnecessary of_platform_populate with default match table") dropped the include of linux/clk-provider.h from arch/mips/ath79/setup.c. This results in the following build error. arch/mips/ath79/setup.c: In function 'ath79_of_plat_time_init': arch/mips/ath79/setup.c:232:2: error: implicit declaration of function 'of_clk_init' Fixes: ddd0ce87bfde ("mips: Remove unnecessary of_platform_populate with default match table") Cc: Rob Herring <robh@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-23mips: Remove unnecessary of_platform_populate with default match tableKefeng Wang1-3/+0
After patch "of/platform: Add common method to populate default bus", it is possible for arch code to remove unnecessary callers of of_platform_populate with default match table. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alban Bedel <albeu@free.fr> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Joshua Henderson <joshua.henderson@microchip.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-20Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-2/+4
Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-17MIPS: ath79: fix regression in PCI window initializationFelix Fietkau1-8/+8
ath79_ddr_pci_win_base has the type void __iomem *, so register offsets need to be a multiple of 4. Cc: Alban Bedel <albeu@free.fr> Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface") Signed-off-by: Felix Fietkau <nbd@nbd.name> Cc: sergei.shtylyov@cogentembedded.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13258/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-17MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCsFelix Fietkau1-4/+4
AR913x, AR724x and AR933x are the only SoCs where the ath79_ddr_wb_flush_base starts at 0x7c, all newer SoCs use 0x9c Invert the logic to make the code compatible with AR95xx Signed-off-by: Felix Fietkau <nbd@nbd.name> Cc: albeu@free.fr Cc: sergei.shtylyov@cogentembedded.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13257/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: update devicetree clock support for AR9331Antony Pavlov1-34/+62
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12879/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Disable platform code for OF boards.Antony Pavlov1-7/+9
For OF boards we have to skip platform initialization code so we can prove that OF code do all necessary initialization. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12877/ Patchwork: https://patchwork.linux-mips.org/patch/12920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: update devicetree clock support for AR9132Antony Pavlov2-25/+107
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. E.g. you can set any clock rate value in board DTS but it will have no effect on the real clk calculation. This patch fixes some AR9132 devicetree clock support defects: * clk initialization function ath79_clocks_init_dt_ng() is introduced; it actually gets pll block base register address and reference clock from devicetree; * pll register parsing code is moved to the separate ar724x_clk_init() function; this function can be called from platform code or from devicetree code. Also mips_hpt_frequency value is set from dt, so the appropriate clock parameter is added to the cpu@0 devicetree node. The same approach can be used for adding AR9331 devicetree support. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12876/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Introduce <dt-bindings/clock/ath79-clk.h>Antony Pavlov1-16/+17
The include/dt-bindings/clock/ath79-clk.h header file is introduced so we can use symbolic identifiers for SoC clocks. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Use the reset controller to restart OF machinesAlban Bedel1-3/+4
Don't set _machine_restart() on OF machines as the reset driver now provides a system restart handler. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12235/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Remove the builtin DTB supportAlban Bedel2-16/+0
Now that appended DTB is usable we can drop the builtin DTB support. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12231/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: ath79: Add support for DTB passed using the UHI boot protocolAlban Bedel1-0/+2
This is needed for bootloader supporting UHI and to support appended DTB. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12230/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-30MIPS: ath79: make bootconsole wait for both THRE and TEMTMatthias Schiffer1-2/+4
This makes the ath79 bootconsole behave the same way as the generic 8250 bootconsole. Also waiting for TEMT (transmit buffer is empty) instead of just THRE (transmit buffer is not full) ensures that all characters have been transmitted before the real serial driver starts reconfiguring the serial controller (which would sometimes result in garbage being transmitted.) This change does not cause a visible performance loss. In addition, this seems to fix a hang observed in certain configurations on many AR7xxx/AR9xxx SoCs during autoconfig of the real serial driver. A more complete follow-up patch will disable 8250 autoconfig for ath79 altogether (the serial controller is detected as a 16550A, which is not fully compatible with the ath79 serial, and the autoconfig may lead to undefined behavior on ath79.) Cc: <stable@vger.kernel.org> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-03MIPS: ath79: Fix the ar913x reference clock rateAlban Bedel1-37/+1
The reference clock on ar913x is at 40MHz and not 5MHz. The current implementation use the wrong reference rate because it doesn't take the PLL divider in account. But if we fix the code to use the divider it becomes identical with the implementation for ar724x, so just drop the broken ar913x implementation. Signed-off-by: Alban Bedel <albeu@free.fr> Tested-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03MIPS: ath79: Fix the ar724x clock calculationWeijie Gao1-3/+3
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz input clock as the REF_CLK instead of 5MHz. The correct CPU PLL calculation procedure is as follows: CPU_PLL = (FB * REF_CLK) / REF_DIV / 2. This patch is compatible with the current calculation procedure with default FB and REF_DIV values. Tested on AR7240, AR7241 and AR7242. Signed-off-by: Weijie Gao <hackpascal@gmail.com> Signed-off-by: Alban Bedel <albeu@free.fr> (Fixed the commit log message) Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12870/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-17irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/Alban Bedel1-75/+6
Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-2-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-17irqchip/ath79-misc: Move the MISC driver from arch/mips/ath79/Alban Bedel1-148/+15
The driver stays the same but the initialization changes a bit. For OF boards we now get the memory map from the OF node and use a linear mapping instead of the legacy mapping. For legacy boards we still use a legacy mapping and just pass down all the parameters from the board init code. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-1-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-01-04MIPS: ath79: Remove some unused code from setup.cAlban Bedel1-10/+1
Remove the unused defines for the reference clocks rate and the useless machine init function. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04MIPS: ath79: Allow using ath79_ddr_wb_flush() from driversAlban Bedel1-1/+0
Move the declaration of ath79_ddr_wb_flush() to asm/mach-ath79/ath79.h to allow using it from drivers. This is needed to move the CPU IRQ driver to drivers/irqchip. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11502/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04MIPS: ath79: Prepare moving the MISC driver to drivers/irqchipAlban Bedel1-30/+28
To prepare moving out of the arch directory rework the MISC implementation to use irq domains instead of hard coded IRQ numbers. Also remove the uses of the ath79_reset_base global pointer in the IRQ methods. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11506/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-04MIPS: ath79: Remove useless #ifdef CONFIG_IRQCHIPAlban Bedel1-3/+0
IRQCHIP is always enabled, so the #ifdef can just be removed. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-20MIPS: ath79: Add a machine entry for booting OF machinesAlban Bedel1-0/+5
As I'm using a board with a broken old bootloader I hardcoded the mips_machtype and did't notice that the machine entry was still missing. [ralf@linux-mips.org: Fixed spelling message noticed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11503/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-20MIPS: ath79: Fix the DDR control initialization on ar71xx and ar934xAlban Bedel1-1/+1
The DDR control initialization needs to know the SoC type, however ath79_detect_sys_type() was called after ath79_ddr_ctrl_init(). Reverse the order to fix the DDR control initialization on ar71xx and ar934x. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> CC: stable@vger.kernel.org # v4.2+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11500/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22MIPS: ATH79: Add irq chip ar7240-misc-intcAlexander Couzens1-0/+10
The ar7240 misc irq chip use ack handler instead of ack_mask handler. All new ath79 chips use the ar7240 misc irq chip Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: Alban Bedel <albeu@free.fr> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-22MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chipAlexander Couzens1-2/+10
The irq ack handler was forgotten while introducing OF support. Only ar71xx and ar933x based devices require it. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: Alban Bedel <albeu@free.fr> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-4/+4
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-03MIPS: ath79: Move the GPIO driver to drivers/gpioAlban Bedel2-237/+1
GPIO drivers should be in drivers/gpio Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Ath79: Remove the unused GPIO function APIAlban Bedel2-46/+0
To prepare moving the GPIO driver to drivers/gpio remove the platform specific pinmux API. As it is not used by any board, and such functionality should better be implemented using the pinmux subsystem just removing it seems to be the best option. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: ath91: Remove pointless irqdisable/enableThomas Gleixner1-16/+2
The various interrupt flow handlers in ath79 are cascading interrupt handlers. They all have a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: ath79: irq: IRQCHIP_DECLARE moved to linux/irqchip.hAlban Bedel1-1/+0
Remove the ugly cross tree include now that IRQCHIP_DECLARE moved to linux/irqchip.h. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: Export get_c0_perfcount_int()Felix Fietkau1-0/+1
get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: Add basic support for the TL-WR1043ND version 1Alban Bedel1-0/+12
Add a DTS for TL-WR1043ND version 1 and allow to have it built in the kernel to circumvent the broken u-boot found on these boards. Currently only the UART, LEDs and buttons are supported. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Add OF support to the GPIO driverAlban Bedel2-22/+108
Replace the simple GPIO chip registration by a platform driver and make ath79_gpio_init() just register the device. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Add OF support to the clocksAlban Bedel1-19/+44
Allow using the SoC clocks in the device tree. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Add OF support to the IRQ controllersAlban Bedel1-1/+86
Add OF support for the CPU and MISC interrupt controllers of most supported ATH79 devices. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Add basic device tree supportAlban Bedel2-1/+27
Add the bare minimum to load a device tree. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Use the common clk APIAlban Bedel1-27/+2
Make the code simpler and open the way for device tree clocks. [ralf@linux-mips.org: Resolved conflict with 2a552da6 (MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.)] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9774/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Improve the DDR controller interfaceAlban Bedel4-113/+63
The DDR controller need to be used by the IRQ controller to flush the write buffer of some devices before running the IRQ handler. It is also used by the PCI controller to setup the PCI memory windows. The current interface used to access the DDR controller doesn't provides any useful abstraction and simply rely on a shared global pointer. Replace this by a simple API to setup the PCI memory windows and use the write buffer flush independently of the SoC type. That remove the need for the shared global pointer, simplify the IRQ handler code. [ralf@linux-mips.org: Folded in Alban Bedel's follup fix.] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9773/ Patchwork: http://patchwork.linux-mips.org/patch/10543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ath79: Correctly name the defines for the PLL_FB registerAlban Bedel1-3/+3
This register is named PLL_FB and is not a divider but a multiplier. To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and ARxxxx_PLL_FB_MASK. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-02MIPS: ath79: Add a missing new line in log messageAlban Bedel1-1/+1
The memory setup log is missing a new line. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-29MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not setLaurent Fasnacht1-0/+3
initrd_start is defined in init/do_mounts_initrd.c, which is only included in kernel if CONFIG_BLK_DEV_INITRD=y. Signed-off-by: Laurent Fasnacht <l@libres.ch> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.