aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/configs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-08-20media: rc-core: do not depend on MEDIA_SUPPORTSean Young1-1/+1
There is no dependency between the two, so remove the dependency in Kconfig files. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-11MIPS: generic: Support MIPS Boston development boardsPaul Burton1-0/+48
Add support for the MIPS Boston development board to generic kernels, which essentially amounts to: - Adding the device tree source for the MIPS Boston board. - Adding a Kconfig fragment which enables the appropriate drivers for the MIPS Boston board. With these changes in place generic kernels will support the board by default, and kernels with only the drivers needed for Boston enabled can be configured by setting BOARDS=boston during configuration. For example: $ make ARCH=mips 64r6el_defconfig BOARDS=boston Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-27MIPS: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski47-221/+0
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"); - MTD_CONCAT: commit f53fdebcc3e1 ("mtd: drop MTD_CONCAT from Kconfig entirely"); - MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with mtdcore"); - NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with just ETHERNET but that is separate change; - MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove MISC_DEVICES config option"); - HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig options"); - BT_L2CAP and BT_SCO: commit f1e91e1640d8 ("Bluetooth: Always compile SCO and L2CAP in Bluetooth Core"); - DEBUG_ERRORS: commit b025a3f836d1 ("ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS"); - USB_DEVICE_CLASS: commit 007bab91324e ("USB: remove CONFIG_USB_DEVICE_CLASS"); - RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional compilation for RCU CPU stall warnings"); - IP_NF_QUEUE: commit 3dd6664fac7e ("netfilter: remove unused "config IP_NF_QUEUE""); - IP_NF_TARGET_ULOG: commit d4da843e6fad ("netfilter: kill remnants of ulog targets"); - IP6_NF_QUEUE: commit d16cf20e2f2f ("netfilter: remove ip_queue support"); - IP6_NF_TARGET_LOG: commit 6939c33a757b ("netfilter: merge ipt_LOG and ip6_LOG into xt_LOG"); - USB_LED: commit a335aaf3125c ("usb: misc: remove outdated USB LED driver"); - MMC_UNSAFE_RESUME: commit 2501c9179dff ("mmc: core: Use MMC_UNSAFE_RESUME as default behavior"); - AUTOFS_FS: commit 561c5cf9236a ("staging: Remove autofs3"); - VIDEO_OUTPUT_CONTROL: commit f167a64e9d67 ("video / output: Drop display output class support"); - USB_LIBUSUAL: commit f61870ee6f8c ("usb: remove libusual"); - CRYPTO_ZLIB: 110492183c4b ("crypto: compress - remove unused pcomp interface"); - BLK_DEV_UB: commit 68a5059ecf82 ("block: remove the deprecated ub driver"); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/16342/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-05-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-0/+3
Pull MIPS updates from James Hogan: "math-emu: - Add missing clearing of BLTZALL and BGEZALL emulation counters - Fix BC1EQZ and BC1NEZ condition handling - Fix BLEZL and BGTZL identification BPF: - Add JIT support for SKF_AD_HATYPE - Use unsigned access for unsigned SKB fields - Quit clobbering callee saved registers in JIT code - Fix multiple problems in JIT skb access helpers Loongson 3: - Select MIPS_L1_CACHE_SHIFT_6 Octeon: - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL - Remove unused L2C types and macros. - Remove unused SLI types and macros. - Fix compile error when USB is not enabled. - Octeon: Remove unused PCIERCX types and macros. - Octeon: Clean up platform code. SNI: - Remove recursive include of cpu-feature-overrides.h Sibyte: - Export symbol periph_rev to sb1250-mac network driver. - Fix Kconfig warning. Generic platform: - Enable Root FS on NFS in generic_defconfig SMP-MT: - Use CPU interrupt controller IPI IRQ domain support UASM: - Add support for LHU for uasm. - Remove needless ISA abstraction mm: - Add 48-bit VA space and 4-level page tables for 4K pages. PCI: - Add controllers before the specified head irqchip driver for MIPS CPU: - Replace magic 0x100 with IE_SW0 - Prepare for non-legacy IRQ domains - Introduce IPI IRQ domain support MAINTAINERS: - Update email-id of Rahul Bedarkar NET: - sb1250-mac: Add missing MODULE_LICENSE() CPUFREQ: - Loongson2: drop set_cpus_allowed_ptr() Misc: - Disable Werror when W= is set - Opt into HAVE_COPY_THREAD_TLS - Enable GENERIC_CPU_AUTOPROBE - Use common outgoing-CPU-notification code - Remove dead define of ST_OFF - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} - Stengthen IPI IRQ domain sanity check - Remove confusing else statement in __do_page_fault() - Don't unnecessarily include kmalloc.h into <asm/cache.h>. - Delete unused definition of SMP_CACHE_SHIFT. - Delete redundant definition of SMP_CACHE_BYTES" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits) MIPS: Sibyte: Fix Kconfig warning. MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver. NET: sb1250-mac: Add missing MODULE_LICENSE() MAINTAINERS: Update email-id of Rahul Bedarkar MIPS: Remove confusing else statement in __do_page_fault() MIPS: Stengthen IPI IRQ domain sanity check MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support irqchip: mips-cpu: Introduce IPI IRQ domain support irqchip: mips-cpu: Prepare for non-legacy IRQ domains irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} MIPS: generic: Enable Root FS on NFS in generic_defconfig MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h MIPS: Opt into HAVE_COPY_THREAD_TLS CPUFREQ: Loongson2: drop set_cpus_allowed_ptr() MIPS: uasm: Remove needless ISA abstraction MIPS: Remove dead define of ST_OFF MIPS: Use common outgoing-CPU-notification code MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters ...
2017-04-25MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMCSteven J. Hill1-0/+5
Enable the Octeon MMC driver in the defconfig. Signed-off-by: Steven J. Hill <Steven.Hill@cavium.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-12MIPS: generic: Enable Root FS on NFS in generic_defconfigMatt Redfearn1-0/+3
The generic_defconfig is used for platforms like SEAD3 which do not usually have fixed storage available, therefore NFS is the preferred location of the RFS. When the upstream kernel defconfig is built & tested on platforms such as SEAD3 this leads to essentially false failures when the RFS fails to mount. There is little harm in having this feature enabled by default, so enable it in the defconfig. Kernel autoconfiguration & DHCP must also be selected to allow RFS on NFS. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15853/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-21Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds14-24/+72
Pull MIPS updates from James Hogan: "Here's the main MIPS pull request for 4.11. It contains a few new features such as IRQ stacks, cacheinfo support, and KASLR for Octeon CPUs, and a variety of smaller improvements and fixes including devicetree additions, kexec cleanups, microMIPS stack unwinding fixes, and a bunch of build fixes to clean up continuous integration builds. Its all been in linux-next for at least a couple of days, most of it far longer. Miscellaneous: - Add IRQ stacks - Add cacheinfo support - Add "uzImage.bin" zboot target - Unify performance counter definitions - Export various (mainly assembly) symbols alongside their definitions - Audit and remove unnecessary uses of module.h kexec & kdump: - Lots of improvements and fixes - Add correct copy_regs implementations - Add debug logging of new kernel information Security: - Use Makefile.postlink to insert relocations into vmlinux - Provide plat_post_relocation hook (used for Octeon KASLR) - Add support for tuning mmap randomisation - Relocate DTB microMIPS: - A load of unwind fixes - Add some missing .insn to fix link errors MIPSr6: - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6 - Allow pre-r6 emulation on SMP MIPSr6 kernels Cache management: - Treat physically indexed dcache as non-aliasing - Add return errors to protected cache ops for KVM - CM3: Ensure L1 & L2 cache ECC checking matches - CM3: Indicate inclusive caches - I6400: Treat dcache as physically indexed Memory management: - Ensure bootmem doesn't corrupt reserved memory - Export some TLB exception generation functions for KVM OF: - NULL check initial_boot_params before use in of_scan_flat_dt() - Fix unaligned access in of_alias_scan() SMP: - CPS: Don't BUG if a CPU fails to start Other fixes: - Fix longstanding 64-bit IP checksum carry bug - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE, CPU_FREQ_STAT,SCSI_DH changes - Disable certain builtin compiler options, stack-check (whole kernel), asynchronous-unwind-tables (VDSO). - A bunch of build fixes from kernelci.org testing - Various other minor cleanups & corrections BMIPS: - Migrate interrupts during bmips_cpu_disable - BCM47xx: Add Luxul devices - BCM47xx: Fix Asus WL-500W button inversion - BCM7xxx: Add SPI device nodes Generic (multiplatform): - Add kexec DTB passing - Fix big endian - Add cpp_its_S in ksym_dep_filter to silence build warning IP22: - Reformat inline assembler code to modern standards - Fix binutils 2.25 build error IP27: - Fix duplicate CAC_BASE definition build error - Disable qlge driver to workaround broken compiler Lantiq: - Refresh defconfig and activate more drivers - Lock DMA register access - Fix cascading IRQ setup - Fix build of VPE loader - xway: Fix ethernet packet header corruption over reboot Loongson1 - Add watchdog support - 1B: Reduce DEFAULT_MEMSIZE to 64MB - 1B: Change OSC clock name to match rest of kernel - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB Octeon: - Add KASLR support - Support Octeon III USB controller - Fix large copy_from_user corner case - Enable devtmpfs in defconfig Netlogic: - Fix non-default XLR build error due to netlogic,xlp-pic code - Fix assembler warning from smpboot.S pic32mzda: - Fix linker error when early printk is disabled Pistachio: - Add base device tree - Add Ci40 "Marduk" device tree Ralink: - Support raw appended DTB - Add missing I2C & I2S clocks - Add missing pinmux and fix pinmux function name typo - Add missing clk_round_rate() - Clean up prom_init() - MT7621: Set SoC type - MT7621: Support highmem TXx9: - Modernize printing of kernel messages and resolve KERN_CONT fallout - 7segled: use permission-specific DEVICE_ATTR variants XilFPGA: - Add IRQ controller and UART IRQ - Add AXI I2C and emaclite to DT & defconfig" * tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits) MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables MIPS: BCM47XX: Fix button inversion for Asus WL-500W MIPS: DTS: Add img directory to Makefile MIPS: ip27: Disable qlge driver in defconfig MIPS: pic32mzda: Fix linker error for pic32_get_pbclk() MIPS: Lantiq: Keep ethernet enabled during boot MIPS: OCTEON: Fix copy_from_user fault handling for large buffers MIPS: Fix special case in 64 bit IP checksumming. MIPS: OCTEON: Enable DEVTMPFS MIPS: lantiq: Set physical_memsize MIPS: sysmips: Remove duplicated include from syscall.c Kbuild: Add cpp_its_S in ksym_dep_filter MIPS: Audit and remove any unnecessary uses of module.h MIPS: Unify perf counter register definitions MIPS: Disable stack checks on MIPS kernels MIPS: OCTEON: Platform support for OCTEON III USB controller MIPS: Lantiq: Fix cascaded IRQ setup MIPS: sync-r4k: Fix KERN_CONT fallout MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch MIPS: Fix distclean with Makefile.postlink ...
2017-02-17MIPS: ip27: Disable qlge driver in defconfigArnd Bergmann1-1/+0
One of the last remaining failures in kernelci.org is for a gcc bug: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: error: insn does not satisfy its constraints: drivers/net/ethernet/qlogic/qlge/qlge_main.c:4819:1: internal compiler error: in extract_constrain_insn, at recog.c:2190 This is apparently broken in gcc-6 but fixed in gcc-7, and I cannot reproduce the problem here. However, it is clear that ip27_defconfig does not actually need this driver as the platform has only PCI-X but not PCIe, and the qlge adapter in turn is PCIe-only. The driver was originally enabled in 2010 along with lots of other drivers. Fixes: 59d302b342e5 ("MIPS: IP27: Make defconfig useful again.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15197/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-15MIPS: OCTEON: Enable DEVTMPFSJames Hogan1-0/+1
Recent versions of udev and systemd require the kernel to be compiled with CONFIG_DEVTMPFS in order to populate the /dev directory. Most MIPS platforms have it enabled by default, so enable it for the Cavium Octeon defconfig as well. This will assist with automated kernel boot testing. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15294/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-09MIPS: BMIPS: enable CPUfreqMarkus Mayer1-0/+8
Enable all applicable CPUfreq options. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09MIPS: BMIPS: Update defconfigMarkus Mayer1-6/+2
Ran "make savedefconfig" to bring bmips_stb_defconfig up to date. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-03cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config optionViresh Kumar1-1/+0
This doesn't have any benefit apart from saving a small amount of memory when it is disabled. The ifdef hackery in the code makes it dirty unnecessarily. Clean it up by removing the Kconfig option completely. Few defconfigs are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-24MIPS: Update ip27_defconfig for SCSI_DH changeArnd Bergmann1-1/+1
Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15001/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Update lemote2f_defconfig for CPU_FREQ_STAT changeArnd Bergmann1-1/+1
Since linux-4.8, CPU_FREQ_STAT is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/lemote2f_defconfig:42:warning: symbol value 'm' invalid for CPU_FREQ_STAT This updates the defconfig to have the feature built-in. Fixes: 1aefc75b2449 ("cpufreq: stats: Make the stats code non-modular") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15000/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24MIPS: Update defconfigs for NF_CT_PROTO_DCCP/UDPLITE changeArnd Bergmann7-12/+12
In linux-4.10-rc, NF_CT_PROTO_UDPLITE and NF_CT_PROTO_DCCP are bool symbols instead of tristate, and kernelci.org reports a bunch of warnings for this, like: arch/mips/configs/malta_kvm_guest_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/malta_defconfig:62:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/malta_defconfig:63:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE arch/mips/configs/ip22_defconfig:70:warning: symbol value 'm' invalid for NF_CT_PROTO_DCCP arch/mips/configs/ip22_defconfig:71:warning: symbol value 'm' invalid for NF_CT_PROTO_UDPLITE This changes all the MIPS defconfigs with these symbols to have them built-in. Fixes: 9b91c96c5d1f ("netfilter: conntrack: built-in support for UDPlite") Fixes: c51d39010a1b ("netfilter: conntrack: built-in support for DCCP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Lantiq: Activate more drivers in default configurationHauke Mehrtens1-1/+12
This activates the following functionalities: * SMP support (used on xRX200) * PCI support * NAND driver * PHY driver * UART * Watchdog * USB 2.0 controller These driver are driving different IP cores found on the supported SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14628/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: lantiq: Refresh default configurationHauke Mehrtens1-7/+1
Just generate a configuration based on this default configuration and store it again. This removed some old configuration options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14629/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Loongson1: Add watchdog support for Loongson1 boardYang Ling2-0/+8
The patch adds watchdog support for Loongson1 board. Signed-off-by: Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14644/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: xilfpga: Update defconfigZubair Lutfullah Kakakhel1-1/+36
Update defconfig to enable emaclite, i2c and temp sensor on the xilfpga platform Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14595/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Convert SEAD-3 to a generic boardPaul Burton3-251/+32
Convert the MIPS SEAD-3 board support to be a generic board, supported by generic kernels. Because the SEAD-3 boot protocol was defined long ago and we don't want to force a switch to the UHI protocol, SEAD-3 is added as a legacy board which is detected by reading the REVISION register. This may technically not be a valid memory read & future work will include attempting to handle that gracefully. In practice since SEAD-3 is the only legacy board supported by the generic kernel so far the read will only happen on SEAD-3 boards, and even once Malta is converted the same REVISION register exists there too. Other boards such as Boston, Ci20 & Ci40 will use the UHI boot protocol & thus not run any of the legacy board detect functions. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: generic: Introduce generic DT-based board supportPaul Burton10-0/+122
Introduce a "generic" platform, which aims to be board-agnostic by making use of device trees passed by the boot protocol defined in the MIPS UHI (Universal Hosting Interface) specification. Provision is made for supporting boards which use a legacy boot protocol that can't be changed, but adding support for such boards or any others is left to followon patches. Right now the built kernels expect to be loaded to 0x80100000, ie. in kseg0. This is fine for the vast majority of MIPS platforms, but nevertheless it would be good to remove this limitation in the future by mapping the kernel via the TLB such that it can be loaded anywhere & map itself appropriately. Configuration is handled by dynamically generating configs using scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc makes use of it. This allows for variations upon the configuration, eg. differing architecture revisions or subsets of driver support for differing boards, to be handled without having a large number of defconfig files. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: Malta: Use syscon-reboot driver to rebootPaul Burton9-0/+18
Make use of the generic syscon-reboot driver to reboot the Malta board, reducing the amount of platform code it requires. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Stephan Linz <linz@li-pro.net> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14279/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: Malta: Probe pflash via DTPaul Burton4-4/+4
Add the DT nodes required to probe the CFI compatible parallel monitor flash found on the Malta development board, and remove the platform code that was previously doing it. Delete the now-empty malta-platform.c file. Adjust the Malta defconfigs that enable MTD & the pflash/CFI driver to enable CONFIG_MTD_PHYSMAP_OF rather than CONFIG_MTD_PHYSMAP in order to preserve their behaviour. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14278/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: SEAD3: Use generic restart-poweroff driverPaul Burton1-0/+1
Remove the custom platform code to restart when instructed to power off, instead relying upon the generic restart-poweroff driver probed via DT to do the same thing. Remove also the halt implementation, which is incorrect. The generic MIPS version will hang the system as halt should. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14057/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: SEAD3: Reset via generic syscon-reboot driver & DTPaul Burton1-1/+2
Remove the SEAD3 implementation of _machine_restart & instead make use of the generic syscon-reboot driver probed via device tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14056/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: SEAD3: Use register-bit-led driver via DT for LEDsPaul Burton1-0/+2
Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using the register-bit-led driver via device tree, rather than a custom driver via platform code. Enable support for the register-bit-led driver & its prerequisite syscon in sead3_defconfig. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14054/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: SEAD3: Use generic ns16550a earlycon supportPaul Burton1-0/+2
Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for early output to the ns16550a UARTs, instead relying upon generic ns16550a earlycon support. This reduces the amount of platform code required for SEAD3 without losing any functionality. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14049/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: SEAD3: Probe UARTs using DTPaul Burton1-0/+2
Probe the UARTs on SEAD3 boards using device tree rather than platform code, in order to reduce the amount of the latter. This requires that CONFIG_SERIAL_OF_PLATFORM be enabled, so enable it in sead3_defconfig. The SEAD3 DT shim code is extended to read bootloader environment variables to determine the appropriate UART & mode for kernel console output & set the stdout-path property of the chosen node accordingly. In contrast to the old platform code, which appears to have only ever set "console=ttyS0,38400n8r" with the code in console_config never having an effect, this will honor the "yamontty" environment variable to select between the 2 UARTs on the board and then check the "modetty0" or "modetty1" variable as appropriate to determine the UART configuration. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14048/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04MIPS: pistachio: Remove ANDROID_TIMED_OUTPUT from defconfig.Fabian Frederick1-1/+0
According to commit 9f6b68774f29 ("android: remove timed output/gpio driver") Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13904/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04MIPS: Loongson1C: Add defconfigYang Ling1-0/+126
Signed-off-by: Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: chenhc@lemote.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13305/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04MIPS: Don't specify STACKPROTECTOR in defconfigsPaul Gortmaker1-1/+0
Only one defconfig has a STACKPROTECTOR value. And it asks for the strong variant, which isn't supported by older toolchains. Due to the nature of MIPS having more platform specific code than say x86, the allyesconfig and allmodconfig aren't as effective for build coverage. So, in addition, I like to use a trivial script to walk all the defconfigs and build each one. However I will get false positives on unsupported stackprotector values with an older toolchain like gcc-4.6.3. As in this instance I am just using the compiler as a glorified syntax checker on a machine where I build a bunch of other arch for the same reason, there is no real motivation to get a newer toolchain for improved optimization etc. Since there is only one of them, and there is nothing about these settings that are board/platform specific, I propose we just eliminate the existing instance and take the default. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: James Hartley <james.hartley@imgtec.com> Cc: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13846/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-08-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-0/+121
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.8. Also includes is a minor SSB cleanup as SSB code traditionally is merged through the MIPS tree: ATH25: - MIPS: Add default configuration for ath25 Boot: - For zboot, copy appended dtb to the end of the kernel - store the appended dtb address in a variable BPF: - Fix off by one error in offset allocation Cobalt code: - Fix typos Core code: - debugfs_create_file returns NULL on error, so don't use IS_ERR for testing for errors. - Fix double locking issue in RM7000 S-cache code. This would only affect RM7000 ARC systems on reboot. - Fix page table corruption on THP permission changes. - Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels. David says, there are no compatibility issues raised by this fix. - Move some signal code around. - Rewrite r4k count/compare clockevent device registration such that min_delta_ticks/max_delta_ticks files are guaranteed to be initialized. - Only register r4k count/compare as clockevent device if we can assume the clock to be constant. - Fix MSA asm warnings in control reg accessors - uasm and tlbex fixes and tweaking. - Print segment physical address when EU=1. - Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO. - CP: Allow booting by VP other than VP 0 - Cache handling fixes and optimizations for r4k class caches - Add hotplug support for R6 processors - Cleanup hotplug bits in kconfig - traps: return correct si code for accessing nonmapped addresses - Remove cpu_has_safe_index_cacheops Lantiq: - Register IRQ handler for virtual IRQ number - Fix EIU interrupt loading code - Use the real EXIN count - Fix build error. Loongson 3: - Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES Octeon: - Delete built-in DTB pruning code for D-Link DSR-1000N. - Clean up GPIO definitions in dlink_dsr-1000n.dts. - Add more LEDs to the DSR-100n DTS - Fix off by one in octeon_irq_gpio_map() - Typo fixes - Enable SATA by default in cavium_octeon_defconfig - Support readq/writeq() - Remove forced mappings of USB interrupts. - Ensure DMA descriptors are always in the low 4GB - Improve USB reset code for OCTEON II. Pistachio: - Add maintainers entry for pistachio SoC Support - Remove plat_setup_iocoherency Ralink: - Fix pwm UART in spis group pinmux. SSB: - Change bare unsigned to unsigned int to suit coding style Tools: - Fix reloc tool compiler warnings. Other: - Delete use of ARCH_WANT_OPTIONAL_GPIOLIB" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits) MIPS: mm: Fix definition of R6 cache instruction MIPS: tools: Fix relocs tool compiler warnings MIPS: Cobalt: Fix typo MIPS: Octeon: Fix typo MIPS: Lantiq: Fix build failure MIPS: Use CPHYSADDR to implement mips32 __pa MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds. MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts. MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N. MIPS: store the appended dtb address in a variable MIPS: ZBOOT: copy appended dtb to the end of the kernel MIPS: ralink: fix spis group pinmux MIPS: Factor o32 specific code into signal_o32.c MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present MIPS: Use per-mm page to execute branch delay slot instructions MIPS: Modify error handling MIPS: c-r4k: Use SMP calls for CM indexed cache ops MIPS: c-r4k: Avoid small flush_icache_range SMP calls MIPS: c-r4k: Local flush_icache_range cache op override MIPS: c-r4k: Split r4k_flush_kernel_vmap_range() ...
2016-07-24MIPS: Add default configuration for ath25Sergey Ryazanov1-0/+119
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-21MIPS: Octeon: cavium_octeon_defconfig: Enable OCTEON SATAMatt Redfearn1-0/+2
Commit a2127e400edd ("libata: support AHCI on OCTEON platform") added a driver for the OCTEON AHCI controller. Enable this driver in the OCTEON defconfig. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13816/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-06-27mips: use the new LED disk activity triggerStephan Linz5-5/+5
- platform: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK' Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-05-23arch/defconfig: remove CONFIG_RESOURCE_COUNTERSKonstantin Khlebnikov2-2/+0
This option was replaced by PAGE_COUNTER which is selected by MEMCG. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-13MIPS: BMIPS: Enable partition parser in defconfigFlorian Fainelli1-0/+1
Enable CONFIG_MTD_BCM63XX_PARTS in arch/mips/configs/bmips_be_defconfig since this is a necessary option to parse the built-in flash partition table on BMIPS big-endian SoCs (Cable Modem and DSL). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12256/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BCM63xx: Enable partition parser in defconfigFlorian Fainelli1-0/+1
Enable CONFIG_MTD_BCM63XX_PARTS in arch/mips/configs/bcm63xx_defconfig since this is a necessary option to parse the built-in flash partition table on BCM63xx SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: simon@fire.lp0.eu Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12255/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Loongson1B: Some updates/fixes for LS1BKelvin Cheung1-10/+25
- Add DMA device - Add NAND device - Add GPIO device - Add LED device - Update the defconfig and rename it to loongson1b_defconfig - Fix ioremap size - Other minor fixes Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/13033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: defconfigs: Remove CONFIG_IPV6_PRIVACYBorislav Petkov11-11/+0
Option is long gone, see 5d9efa7ee99e ("ipv6: Remove privacy config option.") Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/12919/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: OCTEON: cavium_octeon_defconfig: enable all OCTEON SoC driversAaro Koskinen1-5/+10
Some drivers for SoC provided functionality are missing. Enable to those in defconfig to provide better build/testing coverage. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-04-03MIPS: ci20: Enable NAND and UBIFS support in defconfig.Harvey Hunt1-5/+9
Update the Ci20's defconfig to enable the JZ4780's NAND driver and therefore access to the UBIFS rootfs. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-10KEYS: CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an optionDavid Howells8-8/+0
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now mandatory if the keyrings facility is enabled (it's used by libkeyutils in userspace). The defconfig references were removed with: perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \ `git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y` and the integrity Kconfig fixed by hand. Signed-off-by: David Howells <dhowells@redhat.com> cc: Andreas Ziegler <andreas.ziegler@fau.de> cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-01-24MIPS: pic32mzda: Add initial PIC32MZDA Starter Kit defconfigJoshua Henderson1-0/+89
This adds an initial default config that enables all available PIC32 drivers and is enough for booting a PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12105/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds18-88/+121
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
2015-11-11MIPS: BMIPS: Enable GZIP ramdisk and timed printksFlorian Fainelli2-2/+4
Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk support enabled by default as well was timed printks. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kevin Cernekee <cernekee@gmail.com> Reviewed-by: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/11307/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Add xilfpga defconfigZubair Lutfullah Kakakhel1-0/+40
Add defconfig for MIPSfpga Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: mpc30x_defconfig: Convert to use libata PATA driversBartlomiej Zolnierkiewicz1-3/+3
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts mpc30x_defconfig to use libata PATA drivers. PS This platform still uses "ide0=base[,ctl[,irq]]" hack in its defconfig. The hack itself has been removed in 2008 and this platform should be converted to using PATA platform host driver (pata_platform) instead. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11141/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: maltaup_xpa_defconfig: Convert to use libata PATA driversBartlomiej Zolnierkiewicz1-7/+9
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_xpa_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11140/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: maltaup_defconfig: Convert to use libata PATA driversBartlomiej Zolnierkiewicz1-6/+5
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11142/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.