aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/loongson (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-12-17MIPS: Loongson: Cleanups of serial port supportWu Zhangjin5-23/+40
This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Suspend CS5536 MFGPT TimerWu Zhangjin1-0/+11
Before putting the Loongson 2F into wait mode, suspend the MFGPT Timer and after wake-up resume it. This may save some power. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write functionWu Zhangjin1-19/+2
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/683/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Add LID open event as the wakeup eventWu Zhangjin2-4/+71
Yeeloong 2F netbook has an KB3310B embedded controller to manage the LID action. When the LID is closed or opened a SCI interrupt is sent out and the corresponding event is saved to an EC register for later query. Allow the LID open interrupt to wake the processor from wait mode if it is in the suspend mode. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Add basic EC operationsWu Zhangjin3-1/+319
YeeLoong2F has a KB3310b embedded controller. Add basic operations for future related drivers and board support. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson 2F: Add CPU frequency scaling supportWu Zhangjin4-3/+37
Loongson 2F supports CPU clock scaling. When put it into wait mode by setting the frequency as ZERO it will stay in this mode until an external interrupt wakes the CPU again. To enable clock scaling support, an external timer of a known stable rate is required. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/660/ Patchwork: http://patchwork.linux-mips.org/patch/751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add cs5536 MFGPT timer supportWu Zhangjin4-0/+236
CPUFreq support for Loongson 2F requires an external timer. Because the frequency of the MIPS Timer is related to the CPU frequency which itself is variable another timer of constant frequency is required. Export the mfgpt0 counter disable / enable operations for the coming suspend support to suspend / resume the timer. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/658/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add Lynloong supportWu Zhangjin4-0/+5
Add a new machtype and kernel options for the Lynloong. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/657/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add NAS supportWu Zhangjin4-0/+5
Kernel support for this machine is almost the same as Fuloong 2F; the only difference is that it uses the serial port provided by Loongson 2F processor as Yeeloong 2F does. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Yeeloong 2F: Add board specific suspend supportWu Zhangjin2-0/+79
Lemote Loongson 2F family machines need an external interrupt to wake the system from the suspend mode. For YeeLoong 2F and Mengloong 2F setup the keyboard interrupt as the wakeup interrupt. The new Fuloong 2F and LingLoong 2F have a button to directly send an interrupt to the CPU so there is no need to setup an interrupt. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/630/ Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson 2F: Add suspend support frameworkWu Zhangjin3-0/+172
This patch add basic suspend support for loongson2f family machines, loongson2f have a specific feature: when we set it's frequency to ZERO, it will go into a wait mode, and then can be waked up by the external interrupt. so, if we setup suitable interrupts before putting it into wait mode, we will be able wake it up whenever we want via sending the relative interrupts to it. These interrupts are board-specific, Yeeloong2F use the keyboard interrupt and SCI interrupt, but LingLoong and Fuloong2F use the interrupts connected to the processors directly. and BTW: some old LingLoong and FuLoong2F have no such interrupts connected, so, there is no way to wake them up from suspend mode. and therefore, please do not enable the kernel support for them. The board-specific support will be added in the coming patches. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/629/ Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Add support for uncached accelerated mappings.Wu Zhangjin1-0/+58
Loongson2f support video acceleration. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/624/ Patchwork: http://patchwork.linux-mips.org/patch/625/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson 2F: Cleanup the #if clausesWu Zhangjin3-6/+6
This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and replaces the several ugly #if clauses by them. These two options will be utilized by the future loongson revisions and related drivers such as the coming Loongson 2F CPUFreq driver. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add reset supportWu Zhangjin2-1/+173
Fuloong 2F, Yeeloong 2F and Menglong 2F have different reset / shutdown logic. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add IRQ supportWu Zhangjin3-0/+143
The generic i8259_irq() will make kernel hang on booting, so Loongson 2F needs its own polling method. IP6 is shared by the bonito interrupt and perfcounter interrupts. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add basic CS5536 VSM supportWu Zhangjin9-0/+1044
Lemote Loongson 2F family machines use CS5536 as their south bridge and need these lowlevel interfaces to access the devices on CS5536. Virtualize the legacy devices on CS5536 as PCI devices. This way users can access the CS5536 PCI config space directly as a normal multi-function PCI 2.2 device. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add a LEMOTE_MACH2F kernel optionWu Zhangjin1-0/+29
Add a new kernel option for Lemote Loongson 2F family machines. Lemote loongson2f family machines utilize the 2f revision of loongson processor and the AMD CS5536 south bridge. Family members include Fuloong 2F mini PC, Yeeloong 2F notebook, LingLoong all-in-one PC and others. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson: Add basic Loongson 2F supportWu Zhangjin4-9/+45
Loongson 2F has built-in DDR2 and PCI-X controller. The PCI-X controller has a programming interface similiar to the the FPGA northbridge used on Loongson 2E. The main differences between Loongson 2E and Loongson 2F include: 1. Loongson 2F has an extra address window configuration module, which is used to map CPU address space to DDR or PCI address space, or map the PCI-DMA address space to DDR or LIO address space. 2. Loongson 2F supports 8 levels of software configurable CPu frequency which can be configured in the LOONGSON_CHIPCFG0 register. The coming cpufreq and standby support are based on this feature. Loongson.h abstracts the modules and corresponding methods are abstracted. Add other Loongson-2F-specific source code including gcc 4.4 support, PCI memory space, PCI IO space, DMA address. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson: Cleanup the serial port supportWu Zhangjin5-18/+57
To share the same kernel image amon different machines we have added the machtype command line support. In the old serial port implementation the UART base address is hardcoded as a macro in machine.h which breaks with machtype, so change that to discover the address dynamically. Also move the initialization of the UART base address to uart_base.c to avoid remapping twice for early_printk.c and serial.c. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/581/ Patchwork: http://patchwork.linux-mips.org/patch/682/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson: Cleanup machtype supportWu Zhangjin2-9/+18
To choose code for different machines by the value of machtype it needs to be initialized as early as possible. So move initialization of mips_machtype to prom_init(). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Bonito64: Make Loongson independent from Bonito64 code.Wu Zhangjin7-22/+22
The built-in Loongson 2E/2F northbridge in is bonito64-compatible but not identical with it. To avoid influencing the original bonito64 support and make the loongson support more maintainable, it's better to separate the Bonito64 code from the Loongson code. This also prepares the kernel for the coming Loongson 2f machines family support. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com, Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson: Add serial port supportWu Zhangjin2-0/+72
This patch add serial port support for all of the existing loongson family machines. most of the board specific part are put in serial.c, and the base address of the serial ports are defined as macros in machine.h for sharing it between serial.c and early_printk.c Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson early_printk: Fix variable type of uart_baseWu Zhangjin1-5/+5
The uart_base variable here is not a physical address, so, we replace it by unsigned char *. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Fuloong2e: Cleanup KconfigWu Zhangjin1-26/+26
Changes indention from whitespace to tabs in arch/mips/loongson/Kconfig. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson: Register reserved memory pagesWu Zhangjin1-0/+8
Register reserved pages for Loongson family machines. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com, Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com, Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-10vfs: Implement proper O_SYNC semanticsChristoph Hellwig1-1/+1
While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-02MIPS: Loongson: Remove redundant local_irq_disable()Wu Zhangjin1-1/+0
That code is executed with irq disabled already, so, remove the redundant local_irq_disable() here. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-20loongson: fix cut-and-paste mis-mergeLinus Torvalds1-1/+1
Ingo points out that I screwed up when merging the 'timers-for-linus' branch in commit a03fdb7612874834d6847107198712d18b5242c7. A bit too much copy-and-pasting caused the end result to have an extraneous 'return' in the middle of an expression. That was obviously bogus. Blush. Reported-by-with-patch: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-18Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-2/+3
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (34 commits) time: Prevent 32 bit overflow with set_normalized_timespec() clocksource: Delay clocksource down rating to late boot clocksource: clocksource_select must be called with mutex locked clocksource: Resolve cpu hotplug dead lock with TSC unstable, fix crash timers: Drop a function prototype clocksource: Resolve cpu hotplug dead lock with TSC unstable timer.c: Fix S/390 comments timekeeping: Fix invalid getboottime() value timekeeping: Fix up read_persistent_clock() breakage on sh timekeeping: Increase granularity of read_persistent_clock(), build fix time: Introduce CLOCK_REALTIME_COARSE x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown clocksource: Avoid clocksource watchdog circular locking dependency clocksource: Protect the watchdog rating changes with clocksource_mutex clocksource: Call clocksource_change_rating() outside of watchdog_lock timekeeping: Introduce read_boot_clock timekeeping: Increase granularity of read_persistent_clock() timekeeping: Update clocksource with stop_machine timekeeping: Add timekeeper read_clock helper functions timekeeping: Move NTP adjusted clock multiplier to struct timekeeper ... Fix trivial conflict due to MIPS lemote -> loongson renaming.
2009-09-17MIPS: Loongson: Add GCC 4.4 support for Loongson2EWu Zhangjin1-1/+1
Because only gcc >=4.4 have loongson-specific support, we need to choose the suitable -march argument for gcc <= 4.3 and gcc >= 4.4, and here, we use -march=loongson2e for loongson2e. Thanks goes to Arnaud Patard <apatard@mandriva.com> for suggestion of using cc-options(Documentation/kbuild/makefiles.txt). and thanks Zhang Le for introducing the new CPU_LOONGSON2E kernel option. NOTE: -mtune option is not need if -march and -mtune use the same value. Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Add a machtype kernel command line argumentWu Zhangjin3-3/+36
The difference between some loongson-based machines is very small, so, if there is no necessary to add new kernel config options to cope with this difference, it will be better to share the same kernel image file between them, benefit from this, the linux distribution developers only have a need to compile the kernel one time. This machtype kernel command line argument will be used later to share the same kernel image file between two different machines(menglong & yeeloong) made by lemote. Thanks very much to Zhang Le for cleaning up the machtype implementation. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Split common loongson source code outWu Zhangjin18-104/+266
To share common loongson source code between all of the loongson-based machines. there is a need to split it out of the fuloong-2e/ directory. at the same time, other according tuning is needed. the machine-specific parts are defined as macros in relative header file, pci.h, mem.h, machine.h. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Loongson: Change naming methodsWu Zhangjin12-0/+559
To make source code of loongson sharable to the machines(such as gdium) made by the other companies, we rename arch/mips/lemote to arch/mips/loongson, asm/mach-lemote to asm/mach-loongson, and rename lm2e to the name of the machine: fuloong-2e. accordingly, FULONG are renamed to FULOONG2E to make it distinguishable to the future FULOONG2F. and also, some other relative tuning is needed. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.