| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream.
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings. In any case, they are temporary and harmless.
Here, we remove all the MIPS __cpuinit from C code and __CPUINIT
from asm files. MIPS is interesting in this respect, because there
are also uasm users hiding behind their own renamed versions of the
__cpuinit macros.
[1] https://lkml.org/lkml/2013/5/20/589
[ralf@linux-mips.org: Folded in Paul's followup fix.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5494/
Patchwork: https://patchwork.linux-mips.org/patch/5495/
Patchwork: https://patchwork.linux-mips.org/patch/5509/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This that should have been fixed but weren't, way to much, intrusive
and late.
|
|
Add GCMP detection for IASim Marvell chip emulation support.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
|
Add new clockevent driver that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: Raghu Gandham <Raghu.Gandham@imgtec.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.
* No longer select CSRC_GIC by default for Malta platform.
* Limit choice for either the GIC or R4K clocksource, not both.
* Change location in Makefile.
* Created new 'gic_read_count' function in common 'irq-gic.c' file.
* Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
* Surround GIC specific code in Malta platform code with #ifdef's.
* Only initialize the GIC clocksource if it was selected. Original
code called it unconditionally if a GIC was found.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Move the global variable 'gic_frequency' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Move the global variable 'gic_present' to be defined in the file
'arch/mips/kernel/irq-gic.c' instead of defining it individually
for each platform making use of the GIC. Also change the type to
be an unsigned integer instead of signed.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Clean-up code according to the 'checkpatch.pl' script.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of
all inclusions of it by Malta and SEAD-3 platforms.
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
ar7 powertv build"].
[ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS:
unbreak powertv build"].
[ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...]
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Remove old YAMON prom code and use common firmware library code.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
Both Guest kernel and Guest Userspace execute in UM. The memory map is as follows:
Guest User address space: 0x00000000 -> 0x40000000
Guest Kernel Unmapped: 0x40000000 -> 0x60000000
Guest Kernel Mapped: 0x60000000 -> 0x80000000
- Guest Usermode virtual memory is limited to 1GB.
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
- Add the KVM option to MIPS build files.
- Add default config files for KVM host/guest kernels.
- Change the link address for the Malta KVM Guest kernel to UM (0x40100000).
- Add KVM Kconfig file with KVM/MIPS specific options
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some MIPS controllers have hardware I/O coherency. This patch
detects those and turns off software coherency. A new kernel
command line option also allows the user to manually turn
software coherency on or off.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
|
|
|
|
Add new clocksource that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Patchwork: http://patchwork.linux-mips.org/patch/4681/
Signed-off-by: John Crispin <blogic@openwrt.org>
|
|
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The CBUS UART's interrupt number was wrong conflicting with the interrupt
being tied to the Intel PIIX4. Since the PIIX4's interrupt is registered
before the CBUS UART which is not being used on most systems this would
not be noticed.
Attempts to open the ttyS2 CBUS UART would result in:
genirq: Flags mismatch irq 18. 00000000 (serial) vs. 00010000 (XT-PIC cascade)
serial_link_irq_chain: request failed: -16 for irq: 18
Qemu was written to match the kernel so will need to be fixed also.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
|
|
|
48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt
handler.] did not take in account that irq_ffs() will also return 0 if for some reason
the set of pending interrupts happens to be empty.
This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results
in something like the following:
CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24
Oops[#1]:
Cpu 0
$ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0
$ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0
$ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000
$12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538
$16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010
$20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078
$24 : 0000000000000028 ffffffff803226e8
$28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24
Hi : 0000000000000000
Lo : 0000006388974000
epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0
Not tainted
ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88
Status: 9000a4e2 KX SX UX KERNEL EXL
Cause : 00808008
BadVA : 0000000000000000
PrId : 000028a0 (Nevada)
Modules linked in:
Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490)
Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000
ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882
9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010
ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8
0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0
0000000000000000 9000000018000000 90000000180003f9 0000000000000001
0000000000000000 00000000000000ff 0000000000000018 0000000000000001
0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac
ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1
0000000000000040 0000000000000000 ffffffff80613340 0000000000500001
...
Call Trace:
[<ffffffff801772d0>] handle_irq_event_percpu+0x70/0x2f0
[<ffffffff8017ad24>] handle_percpu_irq+0x54/0x88
[<ffffffff801769f4>] generic_handle_irq+0x44/0x60
[<ffffffff801037f8>] do_IRQ+0x48/0x70
[<ffffffff80101c44>] ret_from_irq+0x0/0x4
[<ffffffff80326170>] serial8250_startup+0x310/0x870
[<ffffffff8032175c>] uart_startup.part.7+0x9c/0x330
[<ffffffff80321b4c>] uart_open+0x15c/0x1b0
[<ffffffff80302034>] tty_open+0x1fc/0x720
[<ffffffff801bffac>] chrdev_open+0x7c/0x180
[<ffffffff801b9ab8>] do_dentry_open.isra.14+0x288/0x390
[<ffffffff801bac5c>] nameidata_to_filp+0x5c/0xc0
[<ffffffff801ca700>] do_last.isra.33+0x330/0x8f0
[<ffffffff801caf3c>] path_openat+0xbc/0x440
[<ffffffff801cb3c8>] do_filp_open+0x38/0xa8
[<ffffffff801bade4>] do_sys_open+0x124/0x218
[<ffffffff80110538>] handle_sys+0x118/0x13c
Code: 02d5a825 12800012 02a0b02d <de820000> de850008 0040f809 0220202d 0040a82d 40026000
---[ end trace 5d8e7b9a86badd2d ]---
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
YAMON requires and enforces the RTC Data Mode (Register B, DM bit) to
binary, that is the bit is set every time the board goes through the
firmware bootstrap sequence. Likewise its calendar manipulation commands
interpret or set the RTC registers unconditionally as binary, never
actually checking what the value of the DM bit is, under the (correct)
assumption that it has been previously set, to indicate the binary mode.
A change to Linux a while ago however introduced a platform-specific
tweak that clears that bit and therefore forces the data mode to BCD.
This causes clock corruption and misinterpretation that has to be fixed up
by user-mode tools in system startup scripts as the initial clock is often
incorrect according to the BCD interpretation forced.
This change removes the hack; a comment included refers to alarm code,
but even if it was broken at one point by requiring the BCD mode, it
should have been trivially corrected and even if not, given how rarely the
alarm feature is used, that was not really a reasonable justification to
break the system clock that is indeed used by virtually everything. And
either way the alarm code has been since fixed anyway.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4336/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The GIC interrupt code is used by multiple platforms and the
current code was half Malta dependent code. These changes
abstract away the platform specific differences.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
|
|
2ec8663f9c03a96f2c328c7c483603c31d62ad37 (lmo) rsp.
497e5ff03f58583ada469db8a1aa34eced9dd63e (kernel.org) [MIPS: Malta: Move
PIIX4 PCI fixup to where it belongs.] attempted to move this PCI fixup
but really only added it at it's new location without deleting the old
instance.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixups are executed once the pci-device is found which is during boot
process so __init seems fine as long as the platform does not support
hotplug.
However it is possible to remove the PCI bus at run time and have it
rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call
the fixups again.
[ralf@linux-mips.org: Made piixirqmap[] in malta_piix_func0_fixup()
__initdata.]
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with
error: $variablename causes a section type conflict
because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/3565/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
There are ACPI and SMB devices in the 0x1000..0x1fff address range.
Signed-off-by: Steven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3581/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Disintegrate asm/system.h for MIPS.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
cc: linux-mips@linux-mips.org
|
|
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled and we even check
and yell when an interrupt handler returns with interrupts enabled (see
commit [b738a50a: genirq: Warn when handler enables interrupts]).
So now this flag is a NOOP and can be removed.
[ralf@linux-mips.org: Fixed up conflicts in
arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and
arch/mips/kernel/perf_event.c.]
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: tglx@linutronix.de
linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2835/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Mark interrupts with no_action handler, cascade interrupts, low level
interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them
from forced threading.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (31 commits)
MIPS: Close races in TLB modify handlers.
MIPS: Add uasm UASM_i_SRL_SAFE macro.
MIPS: RB532: Use hex_to_bin()
MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
MIPS: PowerTV: Provide cpu-feature-overrides.h
MIPS: Remove pointless return statement from empty void functions.
MIPS: Limit fixrange_init() to the FIXMAP region
MIPS: Install handlers for software IRQs
MIPS: Move FIXADDR_TOP into spaces.h
MIPS: Add SYNC after cacheflush
MIPS: pfn_valid() is broken on low memory HIGHMEM systems
MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
MIPS: topdown mmap support
MIPS: Remove redundant addr_limit assignment on exec.
MIPS: AR7: Replace __attribute__((__packed__)) with __packed
MIPS: AR7: Remove 'space before tabs' in platform.c
MIPS: Lantiq: Add missing clk_enable and clk_disable functions.
MIPS: AR7: Fix trailing semicolon bug in clock.c
MAINTAINERS: Update MIPS entry.
MIPS: BCM63xx: Remove duplicate PERF_IRQSTAT_REG definition
...
|
|
Since 6be63bbbdab66b9185dc6f67c8b1bacb6f37f946 (lmo) rsp.
af3a1f6f4813907e143f87030cde67a9971db533 (kernel.org) the Malta code does
no longer probe for presence of GCMP if CMP is not configured. This means
that the variable gcmp_present well be left at its default value of -1
which normally is meant to indicate that GCMP has not yet been mmapped.
This non-zero value is now interpreted as GCMP being present resulting
in a write attempt to a GCMP register resulting in a crash.
Reported and a build fix on top of my fix by Rob Landley <rob@landley.net>.
Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2413/
|
|
Commit a561b02a2577aec51277ba39c82bd192a79c0267 (lmo) rsp.
7c8d948f1633da5ff81e4f5b31ef237d74c40127 (kernel.org) ["MIPS: i8259: Convert
to new irq_chip functions"] missed one location to modify resulting in
build breakage.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch/arm/mach-footbridge/isa-timer.c | 2 +-
arch/mips/cobalt/time.c | 2 +-
arch/mips/jazz/irq.c | 2 +-
arch/mips/kernel/i8253.c | 2 +-
arch/mips/mti-malta/malta-time.c | 2 +-
arch/mips/sgi-ip22/ip22-time.c | 2 +-
arch/mips/sni/time.c | 2 +-
arch/x86/kernel/apic/apic.c | 2 +-
arch/x86/kernel/apm_32.c | 2 +-
arch/x86/kernel/hpet.c | 2 +-
arch/x86/kernel/i8253.c | 2 +-
arch/x86/kernel/time.c | 2 +-
drivers/block/hd.c | 2 +-
drivers/clocksource/i8253.c | 2 +-
drivers/input/gameport/gameport.c | 2 +-
drivers/input/joystick/analog.c | 2 +-
drivers/input/misc/pcspkr.c | 2 +-
include/linux/i8253.h | 11 +++++++++++
sound/drivers/pcsp/pcsp.h | 2 +-
19 files changed, 29 insertions(+), 18 deletions(-)
|
|
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
sched: Fix and optimise calculation of the weight-inverse
sched: Avoid going ahead if ->cpus_allowed is not changed
sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
sched: Remove unused parameters from sched_fork() and wake_up_new_task()
sched: Shorten the construction of the span cpu mask of sched domain
sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
sched: Remove unused 'this_best_prio arg' from balance_tasks()
sched: Remove noop in alloc_rt_sched_group()
sched: Get rid of lock_depth
sched: Remove obsolete comment from scheduler_tick()
sched: Fix sched_domain iterations vs. RCU
sched: Next buddy hint on sleep and preempt path
sched: Make set_*_buddy() work on non-task entities
sched: Remove need_migrate_task()
sched: Move the second half of ttwu() to the remote cpu
sched: Restructure ttwu() some more
sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
sched: Remove rq argument from ttwu_stat()
sched: Remove rq->lock from the first half of ttwu()
sched: Drop rq->lock from sched_exec()
...
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rt_rq runtime leakage bug
|
|
CC arch/mips/mti-malta/malta-int.o
arch/mips/mti-malta/malta-int.c: In function 'mips_pcibios_iack':
arch/mips/mti-malta/malta-int.c:59:6: error: variable 'dummy' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/mti-malta/malta-init.o
arch/mips/mti-malta/malta-init.c: In function 'prom_init':
arch/mips/mti-malta/malta-init.c:196:6: error: variable 'result' set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.
In order to do so we need a generic callback from the existing scheduler IPI.
This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.
BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
Scripted with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2185/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should
really include it. Note that this can replace #inclusions of <asm/irq.h>.
This is required for the patch to sort out irqflags handling function naming to
compile on MIPS.
The problem is that these files require access to things like setup_irq() -
which isn't available by #including <linux/interrupt.h>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This prevents the GIC code from being reusable sanely.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Several MIPS platforms don't set pci_controller::io_map_base for their
PCI bridges. This results in a panic in pci_iomap(). (The panic is
conditional on CONFIG_PCI_DOMAINS, but that is now enabled for all PCI
MIPS systems.)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: linux-mips@linux-mips.org
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: 584784@bugs.debian.org
Patchwork: https://patchwork.linux-mips.org/patch/1377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
Paul Gortmaker
Ralf Baechle
Leonid Yegoshin
Steven J. Hill
Raghu Gandham
Sanjay Lal
Steven J. Hill
Maciej W. Rozycki
Sebastian Andrzej Siewior
Uwe Kleine-König
David Howells
Yong Zhang
Wu Zhangjin
Linus Torvalds
Peter Zijlstra
Lucas De Marchi
Thomas Gleixner
Ben Hutchings