aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-01-14[CVE-2009-0029] Rename old_readdir to sys_old_readdirHeiko Carstens1-1/+1
This way it matches the generic system call name convention. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-11MIPS: Only write c0_framemask on CPUs which have this register.Ralf Baechle1-1/+4
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss5-353/+234
Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
2009-01-11MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss3-0/+81
Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss4-167/+225
Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: move calc_clock function.Manuel Lauss4-54/+64
Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: RTC counter clocksource / clockevent support.Manuel Lauss5-181/+143
Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent device. As a nice side effect, this also enables use of the 'wait' instruction for runtime idle power savings. If the counters aren't enabled/working properly, fall back on the cp0 counter clock code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: make cp0 counter clocksource/event usable as fallback.Manuel Lauss5-12/+28
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: remove cpu_table.Manuel Lauss5-100/+42
Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
2009-01-11MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss3-34/+0
There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Print irq handler descriptionManuel Lauss1-0/+1
Add the name set by set_irq_chip_and_handler_name() to the output of /proc/interrupts, like so: db1200 ~ # cat /proc/interrupts CPU0 8: 52 Alchemy-IC0-hilevel serial 10: 171 Alchemy-IC0-hilevel au1xxx-mmc 11: 47 Alchemy-IC0-hilevel Au1xxx dbdma 18: 1 Alchemy-IC0-hilevel au1550-spi 29: 1250997 Alchemy-IC0-riseedge timer 37: 211 Alchemy-IC0-hilevel ehci_hcd:usb1, ohci_hcd:usb2 38: 0 Alchemy-IC0-hilevel lcd 72: 2623 DB1200 CPLD-level ide0 73: 257 DB1200 CPLD-level eth0 84: 1 DB1200 CPLD-level sd_insert 85: 0 DB1200 CPLD-level sd_eject ERR: 0 Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: pb1200: update CPLD cascade irq handler.Manuel Lauss1-57/+30
Tested on Db1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: update core interrupt code.Manuel Lauss15-644/+514
This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
2009-01-11MIPS: Alchemy: move commandline mangling out of common codeManuel Lauss9-41/+136
Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: devboards: consolidate filesManuel Lauss23-481/+107
Share some code and merge small files: - Extract the prom init code from all devboard files (they only differ in memory configuration). - Merge the irq configuration into board setup code. - Merge smaller files into board setup code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c create mode 100644 arch/mips/alchemy/devboards/prom.c
2009-01-11MIPS: Alchemy: Move development board code to common subdirectoryManuel Lauss27-12/+28
This should ease sharing of common devboard code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON to arch/mips/KconfigDavid Daney1-2/+61
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add defconfig for Cavium OCTEON.David Daney1-0/+943
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Adjust the dma-common.c platform hooks.David Daney6-20/+135
We add a dev parameter to plat_unmap_dma_mem(), and hooks for plat_dma_supported() and plat_extra_sync_for_device() which should be nop changes for all existing targets. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON slot into proper tlb category.David Daney1-0/+1
Expand the case statement for build_tlb_write_entry so that it does the right thing on Cavium CPU variants. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Compute branch returns for Cavium OCTEON specific branch instructions.David Daney1-0/+33
For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Cavium OCTEON multiplier state preservation.David Daney1-0/+17
For OCTEON, implement a save and restore of the multiplier state across context switches. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.David Daney1-0/+3
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.cDavid Daney2-0/+35
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON cop2/cvmseg state entries to processor.h.David Daney1-0/+69
Add in the cop2 and cvmseg state info to the known proc reg data for Cavium so that it can be tracked, saved, restored. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Modify core io.h macros to account for the Octeon Errata Core-301.David Daney1-0/+14
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Hook up Cavium OCTEON in arch/mips.David Daney4-0/+19
Take all the OCTEON specific files that were added, and hook them into the build system for the arch/mips. For versions of GCC that lack OCTEON support, override gas target architecture. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Hook Cavium OCTEON cache init into cache.cDavid Daney2-0/+9
Follow precedent of other boards, and hook-up the CPU specific cache init. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON processor constants and CPU probe.David Daney3-0/+41
Add OCTEON constants to asm/cpu.h and asm/module.h. Add probe function for Cavium OCTEON CPUs and hook it up. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Override assembler target architecture for octeon.David Daney2-0/+6
Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON specific register definitions to mipsregs.hDavid Daney1-0/+20
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: For Cavium OCTEON set hwrena and lazily restore CP2 state.David Daney1-0/+21
If on Cavium, be aware of cop2 and hwrena during do_cpu(). Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: For Cavium OCTEON handle hazards as per the R10000 handling.David Daney1-2/+2
For Cavium CPU, we treat the same as R10000, in that all hazards are dealt with in hardware. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.David Daney19-0/+4243
These are the rest of the new files needed to add OCTEON processor support to the Linux kernel. Other than Makefile and Kconfig which should be obvious, we have: csrc-octeon.c -- Clock source driver for OCTEON. dma-octeon.c -- Helper functions for mapping DMA memory. flash_setup.c -- Register on-board flash with the MTD subsystem. octeon-irq.c -- OCTEON interrupt controller managment. octeon-memcpy.S -- Optimized memcpy() implementation. serial.c -- Register 8250 platform driver and early console. setup.c -- Early architecture initialization. smp.c -- OCTEON SMP support. octeon_switch.S -- Scheduler context switch for OCTEON. c-octeon.c -- OCTEON cache controller support. cex-oct.S -- OCTEON cache exception handler. asm/mach-cavium-octeon/*.h -- Architecture include files. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/Kconfig create mode 100644 arch/mips/cavium-octeon/Makefile create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c create mode 100644 arch/mips/cavium-octeon/dma-octeon.c create mode 100644 arch/mips/cavium-octeon/flash_setup.c create mode 100644 arch/mips/cavium-octeon/octeon-irq.c create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S create mode 100644 arch/mips/cavium-octeon/serial.c create mode 100644 arch/mips/cavium-octeon/setup.c create mode 100644 arch/mips/cavium-octeon/smp.c create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h create mode 100644 arch/mips/include/asm/octeon/octeon.h create mode 100644 arch/mips/kernel/octeon_switch.S create mode 100644 arch/mips/mm/c-octeon.c create mode 100644 arch/mips/mm/cex-oct.S
2009-01-11MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon/executive and asm/octeon.David Daney15-0/+4200
These files are used to coordinate resource sharing between all of the programs running on the OCTEON SOC. The OCTEON processor has many CPU cores (current parts have up to 16, but more are possible). It also has a variety of on-chip hardware blocks for things like network acceleration, encryption and RAID. One typical configuration is to run Linux on several of the CPU cores, and other dedicated applications on the other cores. Resource allocation between the various programs running on the system (Linux kernel and other dedicated applications) needs to be coordinated. The code we use to do this we call the 'executive'. All of this resource allocation and sharing code is gathered together in the executive directory. Included in the patch set are the following files: cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation. All memory used by the Linux kernel is obtained here at boot time. cvmx-l2c.c -- Coordinates operations on the shared level 2 cache. octeon-model.c -- Probes chip capabilities and version. The corresponding headers are in asm/octeon. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/cavium-octeon/executive/Makefile create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h create mode 100644 arch/mips/include/asm/octeon/cvmx.h create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h create mode 100644 arch/mips/include/asm/octeon/octeon-model.h
2009-01-11MIPS: Add Cavium OCTEON processor CSR definitionsDavid Daney10-0/+7657
Here we define the addresses and bit-fields of the Configuration and Status Registers (CSRs) for some of the hardware functional units on the OCTEON SOC. Definitions are needed for: CIU -- Central Interrupt Unit. GPIO -- General Purpose Input Output. IOB -- Input / Output {Busing,Bridge}. IPD -- Input Packet Data unit. L2C -- Level-2 Cache controller. L2D -- Level-2 Data cache. L2T -- Level-2 cache Tag. LED -- Light Emitting Diode controller. MIO -- Miscellaneous Input / Output. POW -- Packet Order / Work unit. Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: Alchemy: Change strict_strtol to strict_strtoulJulia Lawall8-8/+8
Since memsize is unsigned, it would seem better to use strict_strtoul that strict_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @s2@ long e; position p; @@ strict_strtol@p(...,&e) @@ position p != s2.p; type T; T e; @@ - strict_strtol@p + strict_strtoul (...,&e) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11MIPS: 64-bit: Use generic 32-bit ptrace compat code.Anirban Sinha1-63/+1
Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-07Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds2-29/+1
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (98 commits) PCI PM: Put PM callbacks in the order of execution PCI PM: Run default PM callbacks for all devices using new framework PCI PM: Register power state of devices during initialization PCI PM: Call pci_fixup_device from legacy routines PCI PM: Rearrange code in pci-driver.c PCI PM: Avoid touching devices behind bridges in unknown state PCI PM: Move pci_has_legacy_pm_support PCI PM: Power-manage devices without drivers during suspend-resume PCI PM: Add suspend counterpart of pci_reenable_device PCI PM: Fix poweroff and restore callbacks PCI: Use msleep instead of cpu_relax during ASPM link retraining PCI: PCIe portdrv: Add kerneldoc comments to remining core funtions PCI: PCIe portdrv: Rearrange code so that related things are together PCI: PCIe portdrv: Fix suspend and resume of PCI Express port services PCI: PCIe portdrv: Add kerneldoc comments to some core functions x86/PCI: Do not use interrupt links for devices using MSI-X net: sfc: Use pci_clear_master() to disable bus mastering PCI: Add pci_clear_master() as opposite of pci_set_master() PCI hotplug: remove redundant test in cpq hotplug PCI: pciehp: cleanup register and field definitions ...
2009-01-07Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/procLinus Torvalds1-6/+18
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: proc: remove write-only variable in proc_pident_lookup() proc: fix sparse warning proc: add /proc/*/stack proc: remove '##' usage proc: remove useless WARN_ONs proc: stop using BKL
2009-01-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...
2009-01-07PCI: mips: use generic INTx swizzle from PCI coreBjorn Helgaas1-16/+1
Use the generic pci_common_swizzle() instead of arch-specific code. Note that pci_common_swizzle() loops based on dev->bus->self, not dev->bus->parent as the mips common_swizzle() did. I think they are equivalent for this purpose. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07PCI: mips: use generic pci_swizzle_interrupt_pin()Bjorn Helgaas2-14/+1
Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-06mips: introduce asm/swab.hHarvey Harrison3-49/+59
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits) uio: make uio_info's name and version const UIO: Documentation for UIO ioport info handling UIO: Pass information about ioports to userspace (V2) UIO: uio_pdrv_genirq: allow custom irq_flags UIO: use pci_ioremap_bar() in drivers/uio arm: struct device - replace bus_id with dev_name(), dev_set_name() libata: struct device - replace bus_id with dev_name(), dev_set_name() avr: struct device - replace bus_id with dev_name(), dev_set_name() block: struct device - replace bus_id with dev_name(), dev_set_name() chris: struct device - replace bus_id with dev_name(), dev_set_name() dmi: struct device - replace bus_id with dev_name(), dev_set_name() gadget: struct device - replace bus_id with dev_name(), dev_set_name() gpio: struct device - replace bus_id with dev_name(), dev_set_name() gpu: struct device - replace bus_id with dev_name(), dev_set_name() hwmon: struct device - replace bus_id with dev_name(), dev_set_name() i2o: struct device - replace bus_id with dev_name(), dev_set_name() IA64: struct device - replace bus_id with dev_name(), dev_set_name() i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name() infiniband: struct device - replace bus_id with dev_name(), dev_set_name() ISDN: struct device - replace bus_id with dev_name(), dev_set_name() ...
2009-01-06atomic_t: unify all arch definitionsMatthew Wilcox1-4/+1
The atomic_t type cannot currently be used in some header files because it would create an include loop with asm/atomic.h. Move the type definition to linux/types.h to break the loop. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06mips: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer1-1/+1
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-05proc: add /proc/*/stackKen Chen1-6/+18
/proc/*/stack adds the ability to query a task's stack trace. It is more useful than /proc/*/wchan as it provides full stack trace instead of single depth. Example output: $ cat /proc/self/stack [<c010a271>] save_stack_trace_tsk+0x17/0x35 [<c01827b4>] proc_pid_stack+0x4a/0x76 [<c018312d>] proc_single_show+0x4a/0x5e [<c016bdec>] seq_read+0xf3/0x29f [<c015a004>] vfs_read+0x6d/0x91 [<c015a0c1>] sys_read+0x3b/0x60 [<c0102eda>] syscall_call+0x7/0xb [<ffffffff>] 0xffffffff [add save_stack_trace_tsk() on mips, ACK Ralf --adobriyan] Signed-off-by: Ken Chen <kenchen@google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-03Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-1/+3
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.