aboutsummaryrefslogtreecommitdiffstats
path: root/arch/parisc/kernel (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-28parisc: Reduce debug output in unwind codeHelge Deller1-2/+2
Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-28parisc: Wire up io_pgetevents syscallHelge Deller1-0/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-28parisc: Convert printk(KERN_LEVEL) to pr_lvl()Andy Shevchenko1-16/+9
Convert printk(KERN_LEVEL) type of calls to pr_lvl() macros. While here, - convert printk() to pr_info() - join back string literal to be on one line - use %*phN (note, it gives 1 byte more for sake of simplicity) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-18parisc: Move setup_profiling_timer() out of init sectionHelge Deller1-2/+1
No other architecture has setup_profiling_timer() in the init section, thus on parisc we face this section mismatch warning: Reference from the function devm_device_add_group() to the function .init.text:setup_profiling_timer() Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-18parisc: Move find_pa_parent_type() out of init sectionHelge Deller1-1/+1
The 0-DAY kernel test infrastructure reported that inet_put_port() may reference the find_pa_parent_type() function, so it can't be moved into the init section. Fixes: b86db40e1ecc ("parisc: Move various functions and strings to init section") Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig2-28/+3
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-07PCI: remove PCI_DMA_BUS_IS_PHYSChristoph Hellwig1-5/+0
This was used by the ide, scsi and networking code in the past to determine if they should bounce payloads. Now that the dma mapping always have to support dma to all physical memory (thanks to swiotlb for non-iommu systems) there is no need to this crude hack any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv) Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-05-02parisc: Fix section mismatchesHelge Deller1-1/+1
Fix three section mismatches: 1) Section mismatch in reference from the function ioread8() to the function .init.text:pcibios_init_bridge() 2) Section mismatch in reference from the function free_initmem() to the function .init.text:map_pages() 3) Section mismatch in reference from the function ccio_ioc_init() to the function .init.text:count_parisc_driver() Signed-off-by: Helge Deller <deller@gmx.de>
2018-05-02parisc: drivers.c: Fix section mismatchesHelge Deller1-3/+4
Fix two section mismatches in drivers.c: 1) Section mismatch in reference from the function alloc_tree_node() to the function .init.text:create_tree_node(). 2) Section mismatch in reference from the function walk_native_bus() to the function .init.text:alloc_pa_dev(). Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-25signal/parisc: Use force_sig_fault where appropriateEric W. Biederman3-63/+27
Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: James Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman3-0/+4
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-20parisc: time: Convert read_persistent_clock() to read_persistent_clock64()Baolin Wang1-1/+1
The read_persistent_clock() uses a timespec, which is not year 2038 safe on 32bit systems. On parisc architecture, we have implemented generic RTC drivers that can be used to compensate the system suspend time, but the RTC time can not represent the nanosecond resolution, so this patch just converts to read_persistent_clock64() with timespec64. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-18parisc: Document rules regarding checksum of HPMC handlerHelge Deller1-0/+11
Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-14parisc: Fix missing binfmt_elf32.o build errorHelge Deller1-1/+1
Commit 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") removed the binfmt_elf32.c source file, but missed to drop the object file from the list of object files the Makefile, which then results in a build error. Fixes: 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-11parisc: Prevent panic at system haltHelge Deller1-8/+5
When issuing a "shutdown -h now", the reboot syscall calls kernel_halt() which shouldn't return, otherwise one gets this panic: reboot: System halted Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.16.0-32bit+ #560 Backtrace: [<1018a694>] show_stack+0x18/0x28 [<106e68a8>] dump_stack+0x80/0x10c [<101a4df8>] panic+0xfc/0x290 [<101a90b8>] do_exit+0x73c/0x914 [<101c7e38>] SyS_reboot+0x190/0x1d4 [<1017e444>] syscall_exit+0x0/0x14 Fix it by letting machine_halt() call machine_power_off() which doesn't return. Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-11exec: pass stack rlimit into mm layout functionsKees Cook1-5/+11
Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11parisc: Switch to generic COMPAT_BINFMT_ELFHelge Deller1-98/+0
Drop our own compat binfmt implementation in arch/parisc/kernel/binfmt_elf32.c in favour of the generic implementation with CONFIG_COMPAT_BINFMT_ELF. While cleaning up the dependencies, I noticed that ELF_PLATFORM was strangely defined: On a 32-bit kernel, it was defined to "PARISC", while when running in compat mode on a 64-bit kernel it was defined to "PARISC32". Since it doesn't seem to be used in glibc yet, it's now defined in both cases to "PARISC". In any case, it can be distinguished because it's either a 32-bit or a 64-bit ELF file. Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-11parisc: Move cache flush functions into .text.hot sectionHelge Deller2-5/+6
and move the disable_sr_hashing() C and assembly functions into the .init section. Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-11parisc/signal: Add FPE_CONDTRAP for conditional trap handlingHelge Deller1-3/+4
Posix and common sense requires that SI_USER not be a signal specific si_code. Thus add a new FPE_CONDTRAP si_code for conditional traps. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2018-04-05mm: fix races between swapoff and flush dcacheHuang Ying1-2/+3
Thanks to commit 4b3ef9daa4fc ("mm/swap: split swap cache into 64MB trunks"), after swapoff the address_space associated with the swap device will be freed. So page_mapping() users which may touch the address_space need some kind of mechanism to prevent the address_space from being freed during accessing. The dcache flushing functions (flush_dcache_page(), etc) in architecture specific code may access the address_space of swap device for anonymous pages in swap cache via page_mapping() function. But in some cases there are no mechanisms to prevent the swap device from being swapoff, for example, CPU1 CPU2 __get_user_pages() swapoff() flush_dcache_page() mapping = page_mapping() ... exit_swap_address_space() ... kvfree(spaces) mapping_mapped(mapping) The address space may be accessed after being freed. But from cachetlb.txt and Russell King, flush_dcache_page() only care about file cache pages, for anonymous pages, flush_anon_page() should be used. The implementation of flush_dcache_page() in all architectures follows this too. They will check whether page_mapping() is NULL and whether mapping_mapped() is true to determine whether to flush the dcache immediately. And they will use interval tree (mapping->i_mmap) to find all user space mappings. While mapping_mapped() and mapping->i_mmap isn't used by anonymous pages in swap cache at all. So, to fix the race between swapoff and flush dcache, __page_mapping() is add to return the address_space for file cache pages and NULL otherwise. All page_mapping() invoking in flush dcache functions are replaced with page_mapping_file(). [akpm@linux-foundation.org: simplify page_mapping_file(), per Mike] Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-02mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()Dominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_readahead() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_readahead(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()Dominik Brodowski1-3/+3
Using this helper allows us to avoid the in-kernel calls to the sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_mmap_pgoff(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()Dominik Brodowski1-1/+1
Using the ksys_fadvise64_64() helper allows us to avoid the in-kernel calls to the sys_fadvise64_64() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as ksys_fadvise64_64(). Some compat stubs called sys_fadvise64(), which then just passed through the arguments to sys_fadvise64_64(). Get rid of this indirection, and call ksys_fadvise64_64() directly. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()Dominik Brodowski1-2/+2
Using the ksys_fallocate() wrapper allows us to get rid of in-kernel calls to the sys_fallocate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_fallocate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscallsDominik Brodowski1-2/+2
Using the ksys_p{read,write}64() wrappers allows us to get rid of in-kernel calls to the sys_pread64() and sys_pwrite64() syscalls. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_p{read,write}64(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()Dominik Brodowski1-3/+3
Using the ksys_truncate() wrapper allows us to get rid of in-kernel calls to the sys_truncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_truncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscallDominik Brodowski1-1/+1
Using this helper allows us to avoid the in-kernel calls to the sys_sync_file_range() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_sync_file_range(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02fs: add ksys_ftruncate() wrapper; remove in-kernel calls to sys_ftruncate()Dominik Brodowski1-2/+2
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_ftruncate(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-03-27parisc: Fix out of array access in match_pci_device()Helge Deller1-0/+4
As found by the ubsan checker, the value of the 'index' variable can be out of range for the bc[] array: UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21 index 6 is out of range for type 'char [6]' Backtrace: [<104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80 [<1019d83c>] check_parent+0xc0/0x170 [<1019d91c>] descend_children+0x30/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019cd54>] parse_tree_node+0x40/0x54 [<1019d86c>] check_parent+0xf0/0x170 [<1019d91c>] descend_children+0x30/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019d938>] descend_children+0x4c/0x6c [<1059e164>] device_for_each_child+0x60/0x98 [<1019cd54>] parse_tree_node+0x40/0x54 [<1019cffc>] hwpath_to_device+0xa4/0xc4 Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2018-03-27parisc: Add code generator for Qemu/SeaBIOS machine infoHelge Deller1-0/+171
Qemu now supports emulating PA-RISC machines. For that a forked version of SeaBIOS available at https://github.com/hdeller/seabios-hppa is used which requires some information about the emulated machine. This patch adds code to generate a header file with the necessary information for SeaBIOS. The information is extracted from the firmware the current kernel is running on. Tested on a B160L workstation. Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-27parisc: Fix HPMC handler by increasing size to multiple of 16 bytesHelge Deller1-1/+5
Make sure that the HPMC (High Priority Machine Check) handler is 16-byte aligned and that it's length in the IVT is a multiple of 16 bytes. Otherwise PDC may decide not to call the HPMC crash handler. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2018-03-27parisc: machine_power_off() should call pm_power_off()Helge Deller1-1/+5
Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Matt Turner <mattst88@gmail.com>
2018-03-27parisc: Move various functions and strings to init sectionHelge Deller2-17/+17
Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-20parisc: time: stop validating rtc_time in .read_timeAlexandre Belloni1-1/+1
The RTC core is always calling rtc_valid_tm after the read_time callback. It is not necessary to call it just before returning from the callback. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17parisc: Handle case where flush_cache_range is called with no contextJohn David Anglin1-9/+32
Just when I had decided that flush_cache_range() was always called with a valid context, Helge reported two cases where the "BUG_ON(!vma->vm_mm->context);" was hit on the phantom buildd: kernel BUG at /mnt/sdb6/linux/linux-4.15.4/arch/parisc/kernel/cache.c:587! CPU: 1 PID: 3254 Comm: kworker/1:2 Tainted: G D 4.15.0-1-parisc64-smp #1 Debian 4.15.4-1+b1 Workqueue: events free_ioctx   IAOQ[0]: flush_cache_range+0x164/0x168   IAOQ[1]: flush_cache_page+0x0/0x1c8   RP(r2): unmap_page_range+0xae8/0xb88 Backtrace:   [<00000000404a6980>] unmap_page_range+0xae8/0xb88   [<00000000404a6ae0>] unmap_single_vma+0xc0/0x188   [<00000000404a6cdc>] zap_page_range_single+0x134/0x1f8   [<00000000404a702c>] unmap_mapping_range+0x1cc/0x208   [<0000000040461518>] truncate_pagecache+0x98/0x108   [<0000000040461624>] truncate_setsize+0x9c/0xb8   [<00000000405d7f30>] put_aio_ring_file+0x80/0x100   [<00000000405d803c>] aio_free_ring+0x8c/0x290   [<00000000405d82c0>] free_ioctx+0x80/0x180   [<0000000040284e6c>] process_one_work+0x21c/0x668   [<00000000402854c4>] worker_thread+0x20c/0x778   [<0000000040291d44>] kthread+0x2d4/0x2e0   [<0000000040204020>] end_fault_vector+0x20/0xc0 This indicates that we need to handle the no context case in flush_cache_range() as we do in flush_cache_mm(). In thinking about this, I realized that we don't need to flush the TLB when there is no context. So, I added context checks to the large flush cases in flush_cache_mm() and flush_cache_range(). The large flush case occurs frequently in flush_cache_mm() and the change should improve fork performance. The v2 version of this change removes the BUG_ON from flush_cache_page() by skipping the TLB flush when there is no context.  I also added code to flush the TLB in flush_cache_mm() and flush_cache_range() when we have a context that's not current.  Now all three routines handle TLB flushes in a similar manner. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-02parisc: Reduce irq overhead when run in qemuHelge Deller1-4/+5
When run under QEMU, calling mfctl(16) creates some overhead because the qemu timer has to be scaled and moved into the register. This patch reduces the number of calls to mfctl(16) by moving the calls out of the loops. Additionally, increase the minimal time interval to 8000 cycles instead of 500 to compensate possible QEMU delays when delivering interrupts. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
2018-03-02parisc: Use cr16 interval timers unconditionally on qemuHelge Deller1-1/+1
When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.14+
2018-03-02parisc: Check if secondary CPUs want own PDC callsHelge Deller2-7/+18
The architecture specification says (for 64-bit systems): PDC is a per processor resource, and operating system software must be prepared to manage separate pointers to PDCE_PROC for each processor. The address of PDCE_PROC for the monarch processor is stored in the Page Zero location MEM_PDC. The address of PDCE_PROC for each non-monarch processor is passed in gr26 when PDCE_RESET invokes OS_RENDEZ. Currently we still use one PDC for all CPUs, but in case we face a machine which is following the specification let's warn about it. Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-02parisc: Fix ordering of cache and TLB flushesJohn David Anglin2-26/+53
The change to flush_kernel_vmap_range() wasn't sufficient to avoid the SMP stalls.  The problem is some drivers call these routines with interrupts disabled.  Interrupts need to be enabled for flush_tlb_all() and flush_cache_all() to work.  This version adds checks to ensure interrupts are not disabled before calling routines that need IPI interrupts.  When interrupts are disabled, we now drop into slower code. The attached change fixes the ordering of cache and TLB flushes in several cases.  When we flush the cache using the existing PTE/TLB entries, we need to flush the TLB after doing the cache flush.  We don't need to do this when we flush the entire instruction and data caches as these flushes don't use the existing TLB entries.  The same is true for tmpalias region flushes. The flush_kernel_vmap_range() and invalidate_kernel_vmap_range() routines have been updated. Secondly, we added a new purge_kernel_dcache_range_asm() routine to pacache.S and use it in invalidate_kernel_vmap_range().  Nominally, purges are faster than flushes as the cache lines don't have to be written back to memory. Hopefully, this is sufficient to resolve the remaining problems due to cache speculation.  So far, testing indicates that this is the case.  I did work up a patch using tmpalias flushes, but there is a performance hit because we need the physical address for each page, and we also need to sequence access to the tmpalias flush code.  This increases the probability of stalls. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2018-01-23mm/memory_failure: Remove unused trapno from memory_failureEric W. Biederman1-1/+1
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc, powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO (alpha, metag, sparc, and tile). These two sets of architectures do not interesect so remove the trapno paramater to remove confusion. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15signal: Unify and correct copy_siginfo_to_user32Eric W. Biederman2-64/+0
Among the existing architecture specific versions of copy_siginfo_to_user32 there are several different implementation problems. Some architectures fail to handle all of the cases in in the siginfo union. Some architectures perform a blind copy of the siginfo union when the si_code is negative. A blind copy suggests the data is expected to be in 32bit siginfo format, which means that receiving such a signal via signalfd won't work, or that the data is in 64bit siginfo and the code is copying nonsense to userspace. Create a single instance of copy_siginfo_to_user32 that all of the architectures can share, and teach it to handle all of the cases in the siginfo union correctly, with the assumption that siginfo is stored internally to the kernel is 64bit siginfo format. A special case is made for x86 x32 format. This is needed as presence of both x32 and ia32 on x86_64 results in two different 32bit signal formats. By allowing this small special case there winds up being exactly one code base that needs to be maintained between all of the architectures. Vastly increasing the testing base and the chances of finding bugs. As the x86 copy of copy_siginfo_to_user32 the call of the x86 signal_compat_build_tests were moved into sigaction_compat_abi, so that they will keep running. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-15signal: Unify and correct copy_siginfo_from_user32Eric W. Biederman2-45/+0
The function copy_siginfo_from_user32 is used for two things, in ptrace since the dawn of siginfo for arbirarily modifying a signal that user space sees, and in sigqueueinfo to send a signal with arbirary siginfo data. Create a single copy of copy_siginfo_from_user32 that all architectures share, and teach it to handle all of the cases in the siginfo union. In the generic version of copy_siginfo_from_user32 ensure that all of the fields in siginfo are initialized so that the siginfo structure can be safely copied to userspace if necessary. When copying the embedded sigval union copy the si_int member. That ensures the 32bit values passes through the kernel unchanged. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-12signal/parisc: Document a conflict with SI_USER with SIGFPEEric W. Biederman1-1/+1
Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. This bug is 13 years old and parsic machines are no longer being built so I don't know if it possible or worth fixing it. But it is at least worth documenting this so other architectures don't make the same mistake. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Ref: 313c01d3e3fd ("[PATCH] PA-RISC update for 2.6.0") Histroy Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-10microblaze: remove dma_nommu_dma_supportedChristoph Hellwig1-7/+0
Always returning 1 is the same behavior as not supplying a method at all. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-09parisc64: Add .opd based function descriptor dereferenceSergey Senozhatsky3-0/+27
We are moving towards separate kernel and module function descriptor dereference callbacks. This patch enables it for parisc64. For pointers that belong to the kernel - Added __start_opd and __end_opd pointers, to track the kernel .opd section address range; - Added dereference_kernel_function_descriptor(). Now we will dereference only function pointers that are within [__start_opd, __end_opd); For pointers that belong to a module - Added dereference_module_function_descriptor() to handle module function descriptor dereference. Now we will dereference only pointers that are within [module->opd.start, module->opd.end). Link: http://lkml.kernel.org/r/20171109234830.5067-5-sergey.senozhatsky@gmail.com To: Tony Luck <tony.luck@intel.com> To: Fenghua Yu <fenghua.yu@intel.com> To: Helge Deller <deller@gmx.de> To: Benjamin Herrenschmidt <benh@kernel.crashing.org> To: Paul Mackerras <paulus@samba.org> To: Michael Ellerman <mpe@ellerman.id.au> To: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-01-06parisc: qemu idle sleep supportHelge Deller1-0/+39
Add qemu idle sleep support when running under qemu with SeaBIOS PDC firmware. Like the power architecture we use the "or" assembler instructions, which translate to nops on real hardware, to indicate that qemu shall idle sleep. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Richard Henderson <rth@twiddle.net> CC: stable@vger.kernel.org # v4.9+
2018-01-02parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernelHelge Deller2-4/+18
Qemu for PARISC reported on a 32bit SMP parisc kernel strange failures about "Not-handled unaligned insn 0x0e8011d6 and 0x0c2011c9." Those opcodes evaluate to the ldcw() assembly instruction which requires (on 32bit) an alignment of 16 bytes to ensure atomicity. As it turns out, qemu is correct and in our assembly code in entry.S and pacache.S we don't pay attention to the required alignment. This patch fixes the problem by aligning the lock offset in assembly code in the same manner as we do in our C-code. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.0+
2018-01-02parisc: Show unhashed hardware inventoryHelge Deller1-1/+1
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Helge Deller <deller@gmx.de>
2017-12-17Revert "parisc: Re-enable interrupts early"John David Anglin1-3/+9
This reverts commit 5c38602d83e584047906b41b162ababd4db4106d. Interrupts can't be enabled early because the register saves are done on the thread stack prior to switching to the IRQ stack. This caused stack overflows and the thread stack needed increasing to 32k. Even then, stack overflows still occasionally occurred. Background: Even with a 32 kB thread stack, I have seen instances where the thread stack overflowed on the mx3210 buildd. Detection of stack overflow only occurs when we have an external interrupt. When an external interrupt occurs, we switch to the thread stack if we are not already on a kernel stack. Then, registers and specials are saved to the kernel stack. The bug occurs in intr_return where interrupts are reenabled prior to returning from the interrupt. This was done incase we need to schedule or deliver signals. However, it introduces the possibility that multiple external interrupts may occur on the thread stack and cause a stack overflow. These might not be detected and cause the kernel to misbehave in random ways. This patch changes the code back to only reenable interrupts when we are going to schedule or deliver signals. As a result, we generally return from an interrupt before reenabling interrupts. This minimizes the growth of the thread stack. Fixes: 5c38602d83e5 ("parisc: Re-enable interrupts early") Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-12-17parisc: remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>