aboutsummaryrefslogtreecommitdiffstats
path: root/arch/parisc (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-12KVM: Save/restore state of assigned PCI deviceJan Kiszka1-1/+4
The guest may change states that pci_reset_function does not touch. So we better save/restore the assigned device across guest usage. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Refactor IRQ names of assigned devicesJan Kiszka2-5/+7
Cosmetic change, but it helps to correlate IRQs with PCI devices. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Switch assigned device IRQ forwarding to threaded handlerJan Kiszka2-83/+36
This improves the IRQ forwarding for assigned devices: By using the kernel's threaded IRQ scheme, we can get rid of the latency-prone work queue and simplify the code in the same run. Moreover, we no longer have to hold assigned_dev_lock while raising the guest IRQ, which can be a lenghty operation as we may have to iterate over all VCPUs. The lock is now only used for synchronizing masking vs. unmasking of INTx-type IRQs, thus is renames to intx_lock. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Clear assigned guest IRQ on releaseJan Kiszka1-0/+3
When we deassign a guest IRQ, clear the potentially asserted guest line. There might be no chance for the guest to do this, specifically if we switch from INTx to MSI mode. Acked-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Mask KVM_GET_SUPPORTED_CPUID data with Linux cpuid infoAvi Kivity1-0/+9
This allows Linux to mask cpuid bits if, for example, nx is enabled on only some cpus. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: SVM: Replace svm_has() by standard Linux cpuid accessorsAvi Kivity1-10/+5
Instead of querying cpuid directly, use the Linux accessors (boot_cpu_has, etc.). This allows the things like the clearcpuid kernel command line to work (when it's fixed wrt scattered cpuid bits). Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: MMU: fix apf prefault if nested guest is enabledXiao Guangrong3-1/+4
If apf is generated in L2 guest and is completed in L1 guest, it will prefault this apf in L1 guest's mmu context. Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: support apf for nonpaing guestXiao Guangrong1-3/+9
Let's support apf for nonpaing guest Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: clear apfs if page state is changedXiao Guangrong1-0/+3
If CR0.PG is changed, the page fault cann't be avoid when the prefault address is accessed later And it also fix a bug: it can retry a page enabled #PF in page disabled context if mmu is shadow page This idear is from Gleb Natapov Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: fix missing post sync auditXiao Guangrong1-0/+1
Add AUDIT_POST_SYNC audit for long mode shadow page Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: Clean up vm creation and releaseJan Kiszka7-72/+49
IA64 support forces us to abstract the allocation of the kvm structure. But instead of mixing this up with arch-specific initialization and doing the same on destruction, split both steps. This allows to move generic destruction calls into generic code. It also fixes error clean-up on failures of kvm_create_vm for IA64. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: x86: Makefile clean upTracey Dent1-1/+1
Changed makefile to use the ccflags-y option instead of EXTRA_CFLAGS. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: remove unused function declarationXiao Guangrong1-1/+0
Remove the declaration of kvm_mmu_set_base_ptes() Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: Refactor srcu struct release on early errorsJan Kiszka1-8/+6
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: VMX: Disallow NMI while blocked by STIAvi Kivity1-1/+6
While not mandated by the spec, Linux relies on NMI being blocked by an IF-enabling STI. VMX also refuses to enter a guest in this state, at least on some implementations. Disallow NMI while blocked by STI by checking for the condition, and requesting an interrupt window exit if it occurs. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: fix the race while wakeup all pv guestXiao Guangrong1-1/+4
In kvm_async_pf_wakeup_all(), we add a dummy apf to vcpu->async_pf.done without holding vcpu->async_pf.lock, it will break if we are handling apfs at this time. Also use 'list_empty_careful()' instead of 'list_empty()' Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: handle more completed apfs if possibleXiao Guangrong1-16/+16
If it's no need to inject async #PF to PV guest we can handle more completed apfs at one time, so we can retry guest #PF as early as possible Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: avoid unnecessary wait for a async pfXiao Guangrong1-0/+1
In current code, it checks async pf completion out of the wait context, like this: if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && !vcpu->arch.apf.halted) r = vcpu_enter_guest(vcpu); else { ...... kvm_vcpu_block(vcpu) ^- waiting until 'async_pf.done' is not empty } kvm_check_async_pf_completion(vcpu) ^- delete list from async_pf.done So, if we check aysnc pf completion first, it can be blocked at kvm_vcpu_block Fixed by mark the vcpu is unhalted in kvm_check_async_pf_completion() path Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: fix searching async gfn in kvm_async_pf_gfn_slotXiao Guangrong1-2/+2
Don't search later slots if the slot is empty Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: cleanup async_pf tracepointsXiao Guangrong1-41/+35
Use 'DECLARE_EVENT_CLASS' to cleanup async_pf tracepoints Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: fix tracing kvm_try_async_get_pageXiao Guangrong2-6/+8
Tracing 'async' and *pfn is useless, since 'async' is always true, and '*pfn' is always "fault_pfn' We can trace 'gva' and 'gfn' instead, it can help us to see the life-cycle of an async_pf Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: replace vmalloc and memset with vzallocTakuya Yoshikawa2-10/+3
Let's use newly introduced vzalloc(). Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: handle exit due to INVD in VMXGleb Natapov2-0/+7
Currently the exit is unhandled, so guest halts with error if it tries to execute INVD instruction. Call into emulator when INVD instruction is executed by a guest instead. This instruction is not needed by ordinary guests, but firmware (like OpenBIOS) use it and fail. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: x86: Avoid issuing wbinvd twiceJan Kiszka1-4/+6
Micro optimization to avoid calling wbinvd twice on the CPU that has to emulate it. As we might be preempted between smp_call_function_many and the local wbinvd, the cache might be filled again so that real work could be done uselessly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: get rid of warning within kvm_dev_ioctl_create_vmHeiko Carstens1-4/+4
Fixes this: CC arch/s390/kvm/../../../virt/kvm/kvm_main.o arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_dev_ioctl_create_vm': arch/s390/kvm/../../../virt/kvm/kvm_main.c:1828:10: warning: unused variable 'r' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: add cast within kvm_clear_guest_page to fix warningHeiko Carstens1-1/+2
Fixes this: CC arch/s390/kvm/../../../virt/kvm/kvm_main.o arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_clear_guest_page': arch/s390/kvm/../../../virt/kvm/kvm_main.c:1224:2: warning: passing argument 3 of 'kvm_write_guest_page' makes pointer from integer without a cast arch/s390/kvm/../../../virt/kvm/kvm_main.c:1185:5: note: expected 'const void *' but argument is of type 'long unsigned int' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: use kmalloc() for small dirty bitmapsTakuya Yoshikawa1-3/+10
Currently we are using vmalloc() for all dirty bitmaps even if they are small enough, say less than K bytes. We use kmalloc() if dirty bitmap size is less than or equal to PAGE_SIZE so that we can avoid vmalloc area usage for VGA. This will also make the logging start/stop faster. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: pre-allocate one more dirty bitmap to avoid vmalloc()Takuya Yoshikawa3-13/+15
Currently x86's kvm_vm_ioctl_get_dirty_log() needs to allocate a bitmap by vmalloc() which will be used in the next logging and this has been causing bad effect to VGA and live-migration: vmalloc() consumes extra systime, triggers tlb flush, etc. This patch resolves this issue by pre-allocating one more bitmap and switching between two bitmaps during dirty logging. Performance improvement: I measured performance for the case of VGA update by trace-cmd. The result was 1.5 times faster than the original one. In the case of live migration, the improvement ratio depends on the workload and the guest memory size. In general, the larger the memory size is the more benefits we get. Note: This does not change other architectures's logic but the allocation size becomes twice. This will increase the actual memory consumption only when the new size changes the number of pages allocated by vmalloc(). Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: introduce wrapper functions for creating/destroying dirty bitmapsTakuya Yoshikawa1-7/+23
This makes it easy to change the way of allocating/freeing dirty bitmaps. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: x86: trace "exit to userspace" eventGleb Natapov2-0/+31
Add tracepoint for userspace exit. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: propagate fault r/w information to gup(), allow read-only memoryMarcelo Tosatti4-25/+71
As suggested by Andrea, pass r/w error code to gup(), upgrading read fault to writable if host pte allows it. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: flush TLBs on writable -> read-only spte overwriteMarcelo Tosatti1-0/+10
This can happen in the following scenario: vcpu0 vcpu1 read fault gup(.write=0) gup(.write=1) reuse swap cache, no COW set writable spte use writable spte set read-only spte Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: MMU: remove kvm_mmu_set_base_ptesMarcelo Tosatti2-9/+1
Unused. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: VMX: remove setting of shadow_base_ptes for EPTMarcelo Tosatti1-3/+1
The EPT present/writable bits use the same position as normal pagetable bits. Since direct_map passes ACC_ALL to mmu_set_spte, thus always setting the writable bit on sptes, use the generic PT_PRESENT shadow_base_pte. Also pass present/writable error code information from EPT violation to generic pagefault handler. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: Avoid double interrupt injection with vapicAvi Kivity1-1/+2
After an interrupt injection, the PPR changes, and we have to reflect that into the vapic. This causes a KVM_REQ_EVENT to be set, which causes the whole interrupt injection routine to be run again (harmlessly). Optimize by only setting KVM_REQ_EVENT if the ppr was lowered; otherwise there is no chance that a new injection is needed. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-01-12KVM: SVM: Fold save_host_msrs() and load_host_msrs() into their callersAvi Kivity1-20/+6
This abstraction only serves to obfuscate. Remove. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: SVM: Move fs/gs/ldt save/restore to heavyweight exit pathAvi Kivity1-14/+21
ldt is never used in the kernel context; same goes for fs (x86_64) and gs (i386). So save/restore them in the heavyweight exit path instead of the lightweight path. By itself, this doesn't buy us much, but it paves the way for moving vmload and vmsave to the heavyweight exit path, since they modify the same registers. [jan: fix copy/pase mistake on i386] Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: SVM: Move svm->host_gs_base into a separate structureAvi Kivity1-3/+5
More members will join it soon. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: SVM: Move guest register save out of interrupts disabled sectionAvi Kivity1-5/+5
Saving guest registers is just a memory copy, and does not need to be in the critical section. Move outside the critical section to improve latency a bit. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: x86: Add missing inline tag to kvm_read_and_reset_pf_reasonJan Kiszka1-1/+1
May otherwise generates build warnings about unused kvm_read_and_reset_pf_reason if included without CONFIG_KVM_GUEST enabled. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Move KVM context switch into own functionAndi Kleen1-25/+38
gcc 4.5 with some special options is able to duplicate the VMX context switch asm in vmx_vcpu_run(). This results in a compile error because the inline asm sequence uses an on local label. The non local label is needed because other code wants to set up the return address. This patch moves the asm code into an own function and marks that explicitely noinline to avoid this problem. Better would be probably to just move it into an .S file. The diff looks worse than the change really is, it's all just code movement and no logic change. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: x86: Mark kvm_arch_setup_async_pf staticJan Kiszka1-1/+1
It has no user outside mmu.c and also no prototype. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: improve hva_to_pfn() readabilityGleb Natapov1-13/+17
Improve vma handling code readability in hva_to_pfn() and fix async pf handling code to properly check vma returned by find_vma(). Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Send async PF when guest is not in userspace too.Gleb Natapov1-1/+2
If guest indicates that it can handle async pf in kernel mode too send it, but only if interrupts are enabled. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Let host know whether the guest can handle async PF in non-userspace context.Gleb Natapov5-4/+11
If guest can detect that it runs in non-preemptable context it can handle async PFs at any time, so let host know that it can send async PF even if guest cpu is not in userspace. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM paravirt: Handle async PF in non preemptable contextGleb Natapov1-6/+34
If async page fault is received by idle task or when preemp_count is not zero guest cannot reschedule, so do sti; hlt and wait for page to be ready. vcpu can still process interrupts while it waits for the page to be ready. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Inject asynchronous page fault into a PV guest if page is swapped out.Gleb Natapov5-12/+55
Send async page fault to a PV guest if it accesses swapped out memory. Guest will choose another task to run upon receiving the fault. Allow async page fault injection only when guest is in user mode since otherwise guest may be in non-sleepable context and will not be able to reschedule. Vcpu will be halted if guest will fault on the same page again or if vcpu executes kernel code. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Handle async PF in a guest.Gleb Natapov6-9/+243
When async PF capability is detected hook up special page fault handler that will handle async page fault events and bypass other page faults to regular page fault handler. Also add async PF handling to nested SVM emulation. Async PF always generates exit to L1 where vcpu thread will be scheduled out until page is available. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM paravirt: Add async PF initialization to PV guest.Gleb Natapov3-0/+101
Enable async PF in a guest if async PF capability is discovered. Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-01-12KVM: Add PV MSR to enable asynchronous page faults delivery.Gleb Natapov8-3/+101
Guest enables async PF vcpu functionality using this MSR. Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.