aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/configs/ppc64_defconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-30powerpc/configs: Enable secure guest support in pseries and ppc64 defconfigsRyan Grimm1-0/+1
Enables running as a secure guest in platforms with an Ultravisor. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820021326.6884-17-bauerman@linux.ibm.com
2019-07-04powerpc: Enable CONFIG_IPV6 in ppc64_defconfigSatheesh Rajendran1-1/+1
Enable CONFIG_IPV6 in ppc64_defconfig to enable certain network functionalities required for tests. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-04powerpc/configs: Disable latencytopAnton Blanchard1-1/+0
latencytop adds almost 4kB to each and every task struct and as such it doesn't deserve to be in our defconfigs. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03powerpc/configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski1-1/+0
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/configs: Don't enable PPC_EARLY_DEBUG in defconfigsMichael Ellerman1-1/+0
This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update default configurations"). That commit was proceeded by a commit which added a config option to control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and then the update of the defconfigs was intended to not change behaviour by then enabling the new config option. However enabling PPC_EARLY_DEBUG had other consequences, notably causing us to register the udbg console at the end of udbg_early_init(). This means on a system which doesn't have anything that BOOTX can use (most systems), we register the udbg console very early but the bootx code just throws everything away, meaning early boot messages are never printed to the console. What we want to happen is for the udbg console to only be registered later (from setup_arch()) once we've setup udbg_putc, and then all early boot messages will be replayed. Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations") Reported-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Add missing config symbols for ppc64_defconfigSatheesh Rajendran1-1/+10
This patch adds missing config symbols for ppc64_defconfig to enable cgroups, memhotplug, numa balancing and XFS in core kernel image. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Add CONFIG_NR_CPUS to ppc64_defconfigSatheesh Rajendran1-0/+1
CONFIG_NR_CPUS is not set in ppc64_defconfig, So it gets default of 32 which is quite small for modern powerpc systems. Instead set a default of 2048 like other powerpc defconfigs. Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Update ppc64_defconfig with savedefconfigMichael Ellerman1-34/+34
Update ppc64_defconfig with savedefconfig. No symbols are added or removed, this is 100% movement. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26powerpc/configs: Remove unnecessary ftrace symbolsMichael Ellerman1-2/+0
In commit 539df7fcb303 ("powerpc/configs: Enable function trace by default") we added: CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y To ppc64_defconfig, powernv_defconfig and pseries_defconfig. But only CONFIG_FUNCTION_TRACER=y is required, CONFIG_FTRACE is default y if DEBUG_KERNEL is enabled, which we have. And then CONFIG_FUNCTION_GRAPH_TRACER is default y when CONFIG_FUNCTION_TRACER is enabled. The extra symbols were already removed from powernv_defconfig in commit 9a018fb1e147 ("powerpc/config: powernv_defconfig updates"). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/config: Enable CONFIG_PRINTK_TIMEPetr Vorel1-0/+1
for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same or higher value than the default (currently 17). Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-17powerpc/powernv: Don't select the cpufreq governorsJoel Stanley1-0/+3
Deciding wich govenors should be built into the kernel can be left to users to configure. Fixes: 81f359027a3a ("cpufreq: powernv: Select CPUFreq related Kconfig options for powernv") Signed-off-by: Joel Stanley <joel@jms.id.au> [mpe: Update powernv/ppc64 defconfigs to enable them by default] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-24irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUGMarc Zyngier1-1/+0
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS, just with less information. Spring cleanup time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com> Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
2017-09-20powerpc/configs: Update for CONFIG_SND changesMichael Ellerman1-3/+4
Commit eb3b705aaed9 ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable") means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we lose some of the SND symbols. And commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build") reorganised things, which causes the churn. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/configs: Enable THP and 64K for ppc64(le)_defconfigBalbir Singh1-0/+2
Enable 64K page size and THP. I use ppc64le_defconfig when I need a single config across guest and host, but having 4K page size as default is not what I expect. I could move these over to server.config and merge if ppc64_defconfig is meant for systems that use 4k pages by default. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/configs: Enable function trace by defaultBalbir Singh1-0/+3
Most (all?) distros turn these on, so it makes sense to enable them for testing coverage, and they're also useful for developers. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Reword change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Add CONFIG_RAS now required for CONFIG_EDACMichael Ellerman1-0/+1
In commit e3c4ff6d8c94 ("EDAC: Remove EDAC_MM_EDAC") CONFIG_EDAC grew a dependency on CONFIG_RAS. Some of our defconfigs don't have the latter, which means we lose CONFIG_EDAC, so add CONFIG_RAS to fix that. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop CONFIG_SERIAL_TXX9_* from cell/ppc64Michael Ellerman1-1/+0
In commit bf4981a00636 ("powerpc: Remove the celleb support") we dropped the celleb support, which made these symbols unselectable because we no longer select HAS_TX99_SERIAL. So drop them from the defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop MEMORY_HOTREMOVE from ppc64/cellMichael Ellerman1-1/+0
xxxx In commit 577ec789a79e ("powerpc/cell: Drop select of MEMORY_HOTPLUG") we removed the last traces of any dependency between Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_SMP for pseries/ppc64/powernvMichael Ellerman1-1/+0
In commit 40e275653e2c ("powerpc/powernv: Always enable SMP when building powernv") and 270e2dc9b803 ("powerpc/pseries: Always enable SMP when building pseries") we forced CONFIG_SMP on for some configs. Therefore we don't need to set it in those configs anymore. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unnecessary CONFIG_UPROBE_EVENTMichael Ellerman1-1/+0
In commit 6b0b7551428e ("perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS") it was renamed to CONFIG_UPROBE_EVENTS. Additionally it's default y, and we have the prerequisites enabled, so we don't need it in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_CRYPTO_DEV_VMX_ENCRYPTMichael Ellerman1-1/+0
Since commit ccf5c442a1b8 ("crypto: vmx - Convert to CPU feature based module autoloading") we no longer need to set CONFIG_CRYPTO_DEV_VMX_ENCRYPT in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop no longer needed CONFIG_FHANDLEMichael Ellerman1-1/+0
Since commit f76be61755c5 ("Make CONFIG_FHANDLE default y") we no longer need to set CONFIG_FHANDLE in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEVMichael Ellerman1-1/+0
In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to default n, with the explanation: Evdev interface has been available for many years and by now everyone is switched to using it, so let's stop offering /dev/input/mouseN and /dev/psaux by default. We had a number of configs which had it enabled, but going by the above explanation probably don't need it enabled anymore. So drop the last remnants of it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman1-1/+0
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Update for symbol movement onlyMichael Ellerman1-12/+12
Update defconfigs for symbols that have moved around, without their value changing. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-09powerpc/configs: Re-enable HARD/SOFT lockup detectorsMichael Ellerman1-1/+2
In commit 05a4a9527931 ("kernel/watchdog: split up config options"), CONFIG_LOCKUP_DETECTOR was split into two separate config options, CONFIG_HARDLOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR. Our defconfigs still have CONFIG_LOCKUP_DETECTOR=y, but that is no longer user selectable, and we don't mention the new options, so we end up with none of them enabled. So update the defconfigs to turn on the new SOFT and HARD options, the end result being the same as what we had previously. Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-05Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-3/+3
Pull powerpc updates from Michael Ellerman: "Highlights include: - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB virtual address space, but a process can request access to the full 512TB by passing a hint to mmap(). - Support for the new Power9 "XIVE" interrupt controller. - TLB flushing optimisations for the radix MMU on Power9. - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface Architecture 2.0". - The ability to configure the mmap randomisation limits at build and runtime. - Several small fixes and cleanups to the kprobes code, as well as support for KPROBES_ON_FTRACE. - Major improvements to handling of system reset interrupts, correctly treating them as NMIs, giving them a dedicated stack and using a new hypervisor call to trigger them, all of which should aid debugging and robustness. - Many fixes and other minor enhancements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi" * tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it powerpc/powernv: Fix TCE kill on NVLink2 powerpc/mm/radix: Drop support for CPUs without lockless tlbie powerpc/book3s/mce: Move add_taint() later in virtual mode powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body powerpc/smp: Document irq enable/disable after migrating IRQs powerpc/mpc52xx: Don't select user-visible RTAS_PROC powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset() powerpc/eeh: Clean up and document event handling functions powerpc/eeh: Avoid use after free in eeh_handle_special_event() cxl: Mask slice error interrupts after first occurrence cxl: Route eeh events to all drivers in cxl_pci_error_detected() cxl: Force context lock during EEH flow powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST powerpc/xmon: Teach xmon oops about radix vectors powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids powerpc/pseries: Enable VFIO powerpc/powernv: Fix iommu table size calculation hook for small tables powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc powerpc: Add arch/powerpc/tools directory ...
2017-04-10EDAC: Remove EDAC_MM_EDACBorislav Petkov1-1/+0
Move all the EDAC core functionality behind CONFIG_EDAC and get rid of that indirection. Update defconfigs which had it. While at it, fix dependencies such that EDAC depends on RAS for the tracepoints. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-edac@vger.kernel.org
2017-03-28powerpc/configs: Re-enable POWER8 crc32cAnton Blanchard1-1/+1
The config option for the POWER8 crc32c recently changed from CONFIG_CRYPT_CRC32C_VPMSUM to CONFIG_CRYPTO_CRC32C_VPMSUM. Update the configs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/configs: Make oprofile a moduleAnton Blanchard1-1/+1
Most people use perf these days, so save about 31kB by making oprofile a module. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/configs: Re-enable ISO9660_FS as a built-in in 64 bit configsAnton Blanchard1-1/+1
It turns out cloud-config uses ISO9660 filesystems to inject configuration data into cloud images. The cloud-config failures when ISO9660_FS is not enabled are cryptic, and building it in makes mainline testing easier, so re-enable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/64: Include bpf/bcc related config options in defconfigsNaveen N. Rao1-0/+7
Specifically: - CONFIG_BPF_SYSCALL - CONFIG_NET_SCHED - CONFIG_NET_CLS_BPF - CONFIG_NET_CLS_ACT - CONFIG_NET_ACT_BPF - CONFIG_CGROUP_BPF - CONFIG_UPROBE_EVENT ... in pseries, ppc64 and powernv defconfigs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-30powerpc: Enable CONFIG_KEXEC_FILE in powerpc server defconfigs.Thiago Jung Bauermann1-0/+2
Enable CONFIG_KEXEC_FILE in powernv_defconfig, ppc64_defconfig and pseries_defconfig. It depends on CONFIG_CRYPTO_SHA256=y, so add that as well. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-18powerpc/configs: Turn on PPC crypto implementations in the server defconfigsMichael Ellerman1-0/+3
These are the PPC optimised versions of various crypto algorithms, so we should turn them on by default to get test coverage. Suggested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-14powerpc: convert ppc64_defconfig to use libata PATA driversBartlomiej Zolnierkiewicz1-6/+3
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts ppc64_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-04powerpc/configs: Enable Intel i40e on 64 bit configsAnton Blanchard1-0/+1
We are starting to see i40e adapters in recent machines, so enable it in our configs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/configs: Change a few things from built in to modulesAnton Blanchard1-7/+7
Change a few devices and filesystems that are seldom used any more from built in to modules. This reduces our vmlinux about 500kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/configs: Bump kernel ring buffer size on 64 bit configsAnton Blanchard1-0/+2
When we issue a system reset, every CPU in the box prints an Oops, including a backtrace. Each of these can be quite large (over 4kB) and we may end up wrapping the ring buffer and losing important information. Bump the base size from 128kB to 256kB and the per CPU size from 4kB to 8kB. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/configs: Enable VMX cryptoAnton Blanchard1-0/+2
We see big improvements with the VMX crypto functions (often 10x or more), so enable it as a module. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08powerpc/configs: Remove old symbols from defconfigsAndrew Donnellan1-5/+1
Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14powerpc/cell: Remove the Cell QPACE codeRashmica Gupta1-1/+0
All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code. Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-29powerpc/configs: Re-enable CONFIG_SCSI_DHMichael Ellerman1-1/+1
Commit 086b91d052eb ("scsi_dh: integrate into the core SCSI code") changed CONFIG_SCSI_DH from tristate to bool. Our defconfigs have CONFIG_SCSI_DH=m, which the kconfig machinery warns us is invalid, but instead of converting it to =y it leaves it unset. This means we loose the CONFIG_SCSI_DH code and everything that depends on it. So convert the values in the defconfigs to =y. Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-27powerpc/powernv: Enable LEDS supportVasant Hegde1-0/+3
Commit 84ad6e5c added LEDS support for PowerNV platform. Lets update ppc64_defconfig to pick LEDS driver. PowerNV LEDS driver looks for "/ibm,opal/leds" node in device tree and loads if this node exists. Hence added it as 'm'. Also note that powernv LEDS driver needs NEW_LEDS and LEDS_CLASS as well. Hence added them to config file. mpe: Also add them to pseries_defconfig, which is currently also used for powernv systems. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-04powerpc/config: Enable bnx2x on ppc64 and pseries defconfigsAnton Blanchard1-0/+1
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-07powerpc: Remove the celleb supportMichael Ellerman1-3/+0
The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org>
2015-01-21powerpc: Enable overlayfs on pseries and ppc64 defconfigsAnton Blanchard1-0/+1
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable KSM on pseries and ppc64 defconfigsAnton Blanchard1-0/+1
KSM will only be used on areas marked for merging via madvise, and it is showing nice improvements on KVM workloads, so enable it by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable CONFIG_SATA_AHCI on pseries and ppc64 defconfigsAnton Blanchard1-0/+1
We are starting to see ppc64 boxes with SATA AHCI adapters in it, so enable it in our defconfigs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable on demand governor on ppc64_defconfigAnton Blanchard1-0/+1
This was enabled on the pseries defconfigs recently, but missed the ppc64 one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman1-11/+1
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.