aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/configs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-03-31[POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIBKumar Gala10-80/+30
The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-31[POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigsKim Phillips2-2/+46
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-25[POWERPC] update pasemi_defconfigOlof Johansson1-54/+88
Disable GEN_RTC since it conflicts with the i2c rtc drivers registering, besides that keep most of the new defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-03-24[POWERPC] Update some defconfigsKumar Gala38-1266/+3031
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-20[POWERPC] Update some defconfigsPaul Mackerras9-512/+750
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-07[POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.Scott Wood2-821/+38
This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-16[POWERPC] 44x: Add multiplatform defconfigJosh Boyer1-0/+904
Add a multiboard defconfig for PowerPC 44x now that the wrapper can create the proper zImages for multiple boards. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-15[POWERPC] 4xx: Update defconfigs for 2.6.25Josh Boyer10-282/+568
Update the 4xx defconfigs to remove WANT_DEVICE_TREE and add MTD_OF_PARTS where appropriate. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-05[POWERPC] 83xx: Update mpc83xx_defconfigKim Phillips1-5/+5
Enable math emulation and ucc_geth and some PHYs mpc83xx boards use. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: rework platform KconfigKumar Gala1-0/+887
* Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: rework platform KconfigKumar Gala1-0/+1523
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc837x rdb defconfigKim Phillips1-0/+887
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc8315 rdb defconfigKim Phillips1-0/+1417
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platformKim Phillips1-1/+1
prepare for adding support for the mpc8315 rdb, since they are identical wrt platform code. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add default config file for Wind River SBC8349 boardPaul Gortmaker1-0/+800
Default config file for SBC8349 board, suitable for use as with NFS as a root file system and gianfar as the NFS root device. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8548Paul Gortmaker1-0/+741
This is a suitable .config file for building the WRS SBC8548 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the soc/16550 compatible UART. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8560Paul Gortmaker1-0/+764
This is a suitable .config file for building the WRS SBC8560 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the 16550 compatible UART on the board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala4-0/+4164
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port STX GP3 board over from arch/ppcKumar Gala1-0/+1183
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-26Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xxPaul Mackerras1-0/+1057
2008-01-25[POWERPC] 4xx: PIKA Warp defconfigSean MacLennan1-0/+1057
Add the defconfig for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] PS3: Update ps3_defconfigGeoff Levand1-14/+35
Update ps3_defconfig. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-24Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25Paul Mackerras7-17/+3794
2008-01-23[POWERPC] Add initial storcenter config file.Jon Loeliger1-0/+1174
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: Update MPC8313e RDB defconfig for MTD, NAND, JFFS2.Scott Wood1-13/+33
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 82xx: Embedded Planet EP8248E supportScott Wood1-0/+821
This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood2-0/+1596
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Update MPC8610 HPCD to support audio driversTimur Tabi1-3/+168
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] MPC8349E-mITX: introduce localbus and pata nodesAnton Vorontsov1-1/+2
This patch adds localbus and pata nodes to use CF IDE interface on MPC8349E-mITX boards. Patch also adds code to probe localbus. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-21[POWERPC] mpc5200: merge defconfigs for all mpc5200 boardsGrant Likely1-57/+496
There is no reason to have separate defconfigs for each mpc5200 board. Instead, here is a common defconfig that can be used for all supported platforms. Merging the defconfigs means there are fewer configuration to test when compile testing all of arch/powerpc and should make support easier. Supported boards: Lite5200(b), Efika, TQM5200, CM5200, MotionPro Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-17Merge branch 'for-2.6.25' of master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25Paul Mackerras1-2/+2
2008-01-15[POWERPC] pasemi: Move electra-ide to pata_of_platformOlof Johansson1-2/+2
Move electra-ide glue over to the new pata_of_platform framework, and add the quirks needed to that driver. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-08[POWERPC] 4xx: enable built-in networking for Sequoia defconfigHollis Blanchard2-7/+21
Enable EMAC driver for Sequoia (and while we're in there, disable Macintosh drivers for Sequoia and Bamboo). Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-04[POWERPC] 4xx: Add EMAC support to Kilauea defconfigStefan Roese1-2/+21
Somehow the EMAC support was dropped (or never really added) to the Kilauea defconfig file. This patch finally adds EMAC support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-31Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemiPaul Mackerras1-4/+26
2007-12-28[POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfigOlof Johansson1-4/+26
Enable MSI now that we have an implementation, and enable CONFIG_MD and the raid options by default as well. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-24[POWERPC] 4xx: Update defconfigsJosh Boyer10-36/+43
Update the 4xx board defconfigs Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Update Kilauea, Rainier, and Walnut defconfigsJosh Boyer3-18/+134
Enable PCI support for these eval boards among other things. Also selects PCI for Rainier in the Kconfig file. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Makalu defconfigStefan Roese1-0/+812
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: 440GRx Rainier default configValentine Barshak1-0/+868
PowerPC 440GRx Rainier default config. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Base support for 440SPe "Katmai" eval boardBenjamin Herrenschmidt1-0/+789
This adds base support for the Katmai board, including PCI-X and PCI-Express (but no RTC, nvram, etc... yet). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Base support for 440GX Taishan eval boardHugh Blemings1-0/+787
This patch adds base support for the AMCC Taishan 440GX evaluation board. Signed-off-by: Hugh Blemings <hugh@blemings.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: EP405 boards support for arch/powerpcBenjamin Herrenschmidt1-0/+951
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD comes from a device-tree property, PCI is working to the point where I can see the video card, USB device, and south bridge. This should work with both EP405 and EP405PC. I've not totally figured out how IRQs are wired on this hardware though, thus at this stage, expect only USB interrupts working, pretty much the same as what arch/ppc did. Also, the flash, nvram, rtc and temp control still have to be wired. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21Merge branch 'linux-2.6'Paul Mackerras3-7/+7
2007-12-21[POWERPC] Add EHEA and EHCA as modules in the ppc64_defconfigStephen Rothwell1-3/+5
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-14Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into mergePaul Mackerras2-6/+6
2007-12-14[POWERPC] Make PS3_SYS_MANAGER default y, not mMichael Ellerman1-1/+1
Currently it's impossible to build a ps3_defconfig which will reboot without modules installed. This makes it all too easy to find yourself with a PS3 that won't reboot. This is because the system manager driver, which provides the reboot mechanism, is only selectable if PS3_ADVANCED is set, else it defaults to m. In ps3_defconfig PS3_ADVANCED is not set, therefore the system manager is built as a module. It would be desirable IMHO for the defconfig to produce a kernel that boots and reboots, without needing modules to be installed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-13[POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCCScott Wood2-6/+6
This was recently made configurable, and needs to be set for these boards. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] 83xx: Add MPC837x MDS default kernel configurationLi Yang1-0/+878
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] Update celleb_defconfig to add support for native CBEIshizaki Kou1-19/+19
Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.