aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm/local.h (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-24bnxt_en: Add support for flashing the device via devlinkVasundhara Volam3-2/+24
Use the same bnxt_flash_package_from_file() function to support devlink flash operation. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Allow PHY settings on multi-function or NPAR PFs if allowed by FW.Michael Chan3-5/+12
Currently, the driver does not allow PHY settings on a multi-function or NPAR NIC whose port is shared by more than one function. Newer firmware now allows PHY settings on some of these NICs. Check for this new firmware setting and allow the user to set the PHY settings accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Add async. event logic for PHY configuration changes.Michael Chan2-0/+11
If the link settings have been changed by another function sharing the port, firmware will send us an async. message. In response, we will call the new bnxt_init_ethtool_link_settings() function to update the current settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Refactor the initialization of the ethtool link settings.Michael Chan1-20/+26
Refactor this logic in bnxt_probe_phy() into a separate function bnxt_init_ethtool_link_settings(). It used to be that the settable link settings will never be changed without going through ethtool. So we only needed to do this once in bnxt_probe_phy(). Now, another function sharing the port may change it and we may need to re-initialize the ethtool settings again in run-time. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Skip disabling autoneg before PHY loopback when appropriate.Michael Chan3-3/+10
New firmware allows PHY loopback to be set without disabling autoneg first. Check this capability and skip disabling autoneg when it is supported by firmware. Using this scheme, loopback will always work even if the PHY only supports autoneg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Assign more RSS context resources to the VFs.Michael Chan1-2/+6
The driver currently only assignes 1 RSS context to each VF. This works for the Linux VF driver. But other drivers, such as DPDK, can make use of additional RSS contexts. Modify the code to divide up and assign RSS contexts to VFs just like other resources. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Initialize context memory to the value specified by firmware.Michael Chan2-9/+19
Some chips that need host context memory as a backing store requires the memory to be initialized to a non-zero value. Query the value from firmware and initialize the context memory accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Fix suspend/resume path on 57500 chipsVasundhara Volam1-0/+14
Driver calls HWRM_FUNC_RESET firmware call while resuming the device which clears the context memory backing store. Because of which allocating firmware resources would eventually fail. Fix it by freeing all context memory during suspend and reallocate the memory during resume. Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call is needed on the 57500 chips so that firmware will set up the proper queue mapping in relation to the context memory. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Send FUNC_RESOURCE_QCAPS command in bnxt_resume()Vasundhara Volam1-2/+10
After driver unregister, firmware is erasing the information that driver supports new resource management. Send FUNC_RESOURCE_QCAPS command to inform the firmware that driver supports new resource management while resuming from hibernation. Otherwise, we fallback to the older resource allocation scheme. Also, move driver register after sending FUNC_RESOURCE_QCAPS command to be consistent with the normal initialization sequence. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Combine 2 functions calling the same HWRM_DRV_RGTR fw command.Vasundhara Volam3-47/+35
Everytime driver registers with firmware, driver is required to register for async event notifications as well. These 2 calls are done using the same firmware command and can be combined. We are also missing the 2nd step to register for async events in the suspend/resume path and this will fix it. Prior to this, we were getting only default notifications. ULP can register for additional async events for the RDMA driver, so we add a parameter to the new function to only do step 2 when it is called from ULP. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Do driver unregister cleanup in bnxt_init_one() failure path.Vasundhara Volam2-3/+11
In the bnxt_init_one() failure path, if the driver has already called firmware to register the driver, it is not undoing the driver registration. Add this missing step to unregister for correctness, so that the firmware knows that the driver has unloaded. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Disable/enable Bus master during suspend/resume.Michael Chan1-0/+8
Disable Bus master during suspend to prevent DMAs after the device goes into D3hot state. The new 57500 devices may continue to DMA from context memory after the system goes into D3hot state. This may cause some PCIe errors on some system. Re-enable it during resume. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24bnxt_en: Add chip IDs for 57452 and 57454 chips.Michael Chan1-1/+6
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so that these chips will be properly classified as P4 chips to take advantage of the P4 fixes and features. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24sfc: fix build without CONFIG_RFS_ACCELJakub Kicinski1-0/+2
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL. Ethtool stats which access those need to be as well. Reported-by: kbuild test robot <lkp@intel.com> Fixes: ca70bd423f10 ("sfc: add statistics for ARFS") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24xen: Fix Kconfig indentationKrzysztof Kozlowski1-29/+29
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-11-23cramfs: fix usage on non-MTD deviceMaxime Bizon1-2/+2
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if we fail to mount on MTD, we don't try on block device. Note: this relies upon cramfs_mtd_fill_super() leaving no side effects on fc state in case of failure; in general, failing get_tree_...() does *not* mean "fine to try again"; e.g. parsed options might've been consumed by fill_super callback and freed on failure. Fixes: 74f78fc5ef43 ("vfs: Convert cramfs to use the new mount API") Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-11-23hv_netvsc: make recording RSS hash depend on feature flagStephen Hemminger3-2/+4
The recording of RSS hash should be controlled by NETIF_F_RXHASH. Fixes: 1fac7ca4e63b ("hv_netvsc: record hardware hash in skb") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23sctp: cache netns in sctp_ep_commonXin Long4-2/+7
This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost1-1/+3
In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: gro: use vlan API instead of accessing directlyTonghao Zhang1-1/+1
Use vlan common api to access the vlan_tag info. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phylink: rename mac_link_state() op to mac_pcs_get_state()Russell King10-65/+59
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 moduleThomas Bogendoerfer1-0/+22
PROM only enables ethernet PHY on first Origin 200 module, so we must do it ourselves for the second module. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-11-23MIPS: PCI: Fix fake subdevice ID for IOC3Thomas Bogendoerfer1-1/+1
Generation of fake subdevice ID had vendor and device ID swapped. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
2019-11-23net: use rhashtable_lookup() instead of rhashtable_lookup_fast()Taehee Yoo4-6/+6
rhashtable_lookup_fast() internally calls rcu_read_lock() then, calls rhashtable_lookup(). So if rcu_read_lock() is already held, rhashtable_lookup() is enough. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change to rst formatRobert Schwebel2-0/+1
Now that the sphinx syntax has been fixed, change the document from txt to rst and add it to the index. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: fix code block syntaxRobert Schwebel1-8/+8
Silence this warning: Documentation/networking/nfc.rst:113: WARNING: Definition list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: fix bullet list syntaxRobert Schwebel1-1/+1
Fix this warning: Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without a blank line; unexpected unindent. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change block diagram to sphinx syntaxRobert Schwebel1-24/+25
Change the block diagram to match the sphinx syntax. This will make it possible to switch this file to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23docs: networking: nfc: change headlines to sphinx syntaxRobert Schwebel1-3/+4
The headlines in this file do are not in the standard kernel docu- mentation headline format. Change it, so this file can be switched to rst in the future. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: initialise phydev speed and duplex sanelyRussell King1-2/+2
When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23net: phy: remove phy_ethtool_sset()Russell King3-62/+2
There are no users of phy_ethtool_sset() in the kernel anymore, and as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode"), the implementation is slightly buggy - it doesn't correctly check the masked advertising mask as it used to. Remove it, and update the phy documentation to refer to its replacement function. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23Revert "bpf: Emit audit messages upon successful prog load and unload"Jakub Kicinski4-38/+1
This commit reverts commit 91e6015b082b ("bpf: Emit audit messages upon successful prog load and unload") and its follow up commit 7599a896f2e4 ("audit: Move audit_log_task declaration under CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs close review on linux-audit, tests etc. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraintsJim Mattson1-1/+3
Commit 37e4c997dadf ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") broke the KVM_SET_MSRS ABI by instituting new constraints on the data values that kvm would accept for the guest MSR, IA32_FEATURE_CONTROL. Perhaps these constraints should have been opt-in via a new KVM capability, but they were applied indiscriminately, breaking at least one existing hypervisor. Relax the constraints to allow either or both of FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX and FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX to be set when nVMX is enabled. This change is sufficient to fix the aforementioned breakage. Fixes: 37e4c997dadf ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Grab KVM's srcu lock when setting nested stateSean Christopherson1-0/+3
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug where nVMX derefences ->memslots without holding ->srcu or ->slots_lock. The other half of nested migration, ->get_nested_state(), does not need to acquire ->srcu as it is a purely a dump of internal KVM (and CPU) state to userspace. Detected as an RCU lockdep splat that is 100% reproducible by running KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the failing function, kvm_is_visible_gfn(), is only checking the validity of a gfn, it's not actually accessing guest memory (which is more or less unsupported during vmx_set_nested_state() due to incorrect MMU state), i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any case, setting nested state isn't a fast path so there's no reason to go out of our way to avoid taking ->srcu. ============================= WARNING: suspicious RCU usage 5.4.0-rc7+ #94 Not tainted ----------------------------- include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by evmcs_test/10939: #0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm] stack backtrace: CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x68/0x9b kvm_is_visible_gfn+0x179/0x180 [kvm] mmu_check_root+0x11/0x30 [kvm] fast_cr3_switch+0x40/0x120 [kvm] kvm_mmu_new_cr3+0x34/0x60 [kvm] nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel] nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel] vmx_set_nested_state+0x256/0x340 [kvm_intel] kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm] kvm_vcpu_ioctl+0xde/0x630 [kvm] do_vfs_ioctl+0xa2/0x6c0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f59a2b95f47 Fixes: 8fcc4b5923af5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Open code shared_msr_update() in its only callerSean Christopherson1-20/+9
Fold shared_msr_update() into its sole user to eliminate its pointless bounds check, its godawful printk, its misleading comment (it's called under a global lock), and its woefully inaccurate name. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: Fix jump label out_free_* in kvm_init()Miaohe Lin1-4/+3
The jump label out_free_1 and out_free_2 deal with the same stuff, so git rid of one and rename the label out_free_0a to retain the label name order. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-23KVM: x86: Remove a spurious export of a static functionSean Christopherson1-1/+0
A recent change inadvertently exported a static function, which results in modpost throwing a warning. Fix it. Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-22sfc: do ARFS expiry work occasionally even without NAPI pollEdward Cree3-8/+12
If there's no traffic on a channel, its ARFS expiry work will never get scheduled by efx_poll() as that isn't being run. So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: add statistics for ARFSEdward Cree3-0/+12
Report the number of successful and failed insertions, and also the current count of filters, to aid in tuning e.g. rps_flow_cnt. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: suppress MCDI errors from ARFSEdward Cree2-6/+30
In high connection count usage, the NIC's filter table may be filled with sufficiently many ARFS filters that further insertions fail. As this does not represent a correctness issue, do not log the resulting MCDI errors. Add a debug-level message under the (by default disabled) rx_status category instead; and take the opportunity to do a little extra expiry work. Since there are now multiple workitems able to call __efx_filter_rfs_expire on a given channel, it is possible for them to race and thus pass quotas which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop all the way around the table with quota left over. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: David Ahern <dahern@digitalocean.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22sfc: change ARFS expiry mechanismEdward Cree4-32/+45
The old rfs_filters_added method for determining the quota could potentially allow the NIC to become filled with old filters, which never get tested for expiry. Instead, explicitly make expiry check work depend on the number of filters installed, and don't count checking slots without filters in as doing work. This guarantees that each filter will be checked for expiry at least once every thirty seconds (assuming the channel to which it belongs is NAPI polling actively) regardless of fill level. Signed-off-by: Edward Cree <ecree@solarflare.com> Tested-by: David Ahern <dahern@digitalocean.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22net: inet_is_local_reserved_port() should return bool not intMaciej Żenczykowski1-4/+4
Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4: add stats for MQPRIO QoS offload Tx pathRahul Lakkireddy4-1/+28
Export necessary stats for traffic flowing through MQPRIO QoS offload Tx path. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4: add UDP segmentation offload supportRahul Lakkireddy6-50/+139
Implement and export UDP segmentation offload (USO) support for both NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to perform USO. v2: - Remove inline keyword from write_eo_udp_wr() in sge.c. Let the compiler decide. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22cxgb4/chcr: update SGL DMA unmap for USORahul Lakkireddy4-115/+52
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO) requests expects the headers to be part of the descriptor and the payload to be part of the SGL containing the DMA mapped addresses. Hence, the DMA address in the first entry of the SGL can start after the packet headers. Currently, unmap_sgl() tries to unmap from this wrong offset, instead of the originally mapped DMA address. So, use existing unmap_skb() instead, which takes originally saved DMA addresses as input. Update all necessary Tx paths to save the original DMA addresses, so that unmap_skb() can unmap them properly. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"Lyude Paul1-1/+0
This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d. Ugh, I really dropped the ball on this one :\. So as it turns out RMI4 works perfectly fine on the X1 Extreme Gen 2 except for one thing I didn't notice because I usually use the trackpoint: clicking with the touchpad. Somehow this is broken, in fact we don't even seem to indicate BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even see any RMI4 events coming from the touchpad when I press down on it. This only seems to work for PS/2 mode. Since that means we have a regression, and PS/2 mode seems to work fine for the time being - revert this for now. We'll have to do a more thorough investigation on this. Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-22afs: Fix large file supportMarc Dionne1-0/+1
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable file size to 2GB, enforced by the vfs. Commit b9b1f8d5930a ("AFS: write support fixes") added support for the 64-bit fetch and store server operations, but did not change this value. As a result, attempts to write past the 2G mark result in EFBIG errors: $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048 dd: error writing 'foo': File too large Set s_maxbytes to MAX_LFS_FILESIZE. Fixes: b9b1f8d5930a ("AFS: write support fixes") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22afs: Fix possible assert with callbacks from yfs serversMarc Dionne1-1/+0
Servers sending callback breaks to the YFS_CM_SERVICE service may send up to YFSCBMAX (1024) fids in a single RPC. Anything over AFSCBMAX (50) will cause the assert in afs_break_callbacks to trigger. Remove the assert, as the count has already been checked against the appropriate max values in afs_deliver_cb_callback and afs_deliver_yfs_cb_callback. Fixes: 35dbfba3111a ("afs: Implement the YFS cache manager service") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-22MIPS: Ingenic: Disable abandoned HPTLB function.Zhou Yanjie2-2/+25
JZ4760/JZ4770/JZ4775/X1000/X1500 has an abandoned huge page tlb, this mode is not compatible with the MIPS standard, it will cause tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) when starting the init process. write 0xa9000000 to cp0 register 5 sel 4 to disable this function to prevent getting stuck. Confirmed by Ingenic, this operation will not adversely affect processors without HPTLB function. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: jiaxun.yang@flygoat.com Cc: gregkh@linuxfoundation.org Cc: malat@debian.org Cc: tglx@linutronix.de Cc: chenhc@lemote.com
2019-11-22ice: Update FW API minor versionKevin Scott1-1/+1
Update FW API minor version to align to current value advertised by FW in new NVM images. Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.