aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm
AgeCommit message (Collapse)AuthorFilesLines
2014-09-25powerpc/eeh: Fix kernel crash when passing through VFWei Yang1-0/+5
When doing vfio passthrough a VF, the kernel will crash with following message: [ 442.656459] Unable to handle kernel paging request for data at address 0x00000060 [ 442.656593] Faulting instruction address: 0xc000000000038b88 [ 442.656706] Oops: Kernel access of bad area, sig: 11 [#1] [ 442.656798] SMP NR_CPUS=1024 NUMA PowerNV [ 442.656890] Modules linked in: vfio_pci mlx4_core nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack bnep bluetooth rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw tg3 nfsd be2net nfs_acl ses lockd ptp enclosure pps_core kvm_hv kvm_pr shpchp binfmt_misc kvm sunrpc uinput lpfc scsi_transport_fc ipr scsi_tgt [last unloaded: mlx4_core] [ 442.658152] CPU: 40 PID: 14948 Comm: qemu-system-ppc Not tainted 3.10.42yw-pkvm+ #37 [ 442.658219] task: c000000f7e2a9a00 ti: c000000f6dc3c000 task.ti: c000000f6dc3c000 [ 442.658287] NIP: c000000000038b88 LR: c0000000004435a8 CTR: c000000000455bc0 [ 442.658352] REGS: c000000f6dc3f580 TRAP: 0300 Not tainted (3.10.42yw-pkvm+) [ 442.658419] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 28004882 XER: 20000000 [ 442.658577] CFAR: c00000000000908c DAR: 0000000000000060 DSISR: 40000000 SOFTE: 1 GPR00: c0000000004435a8 c000000f6dc3f800 c0000000012b1c10 c00000000da24000 GPR04: 0000000000000003 0000000000001004 00000000000015b3 000000000000ffff GPR08: c00000000127f5d8 0000000000000000 000000000000ffff 0000000000000000 GPR12: c000000000068078 c00000000fdd6800 000001003c320c80 000001003c3607f0 GPR16: 0000000000000001 00000000105480c8 000000001055aaa8 000001003c31ab18 GPR20: 000001003c10fb40 000001003c360ae8 000000001063bcf0 000000001063bdb0 GPR24: 000001003c15ed70 0000000010548f40 c000001fe5514c88 c000001fe5514cb0 GPR28: c00000000da24000 0000000000000000 c00000000da24000 0000000000000003 [ 442.659471] NIP [c000000000038b88] .pcibios_set_pcie_reset_state+0x28/0x130 [ 442.659530] LR [c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40 [ 442.659585] Call Trace: [ 442.659610] [c000000f6dc3f800] [00000000000719e0] 0x719e0 (unreliable) [ 442.659677] [c000000f6dc3f880] [c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40 [ 442.659757] [c000000f6dc3f900] [c000000000455bf8] .reset_fundamental+0x38/0x80 [ 442.659835] [c000000f6dc3f980] [c0000000004562a8] .pci_dev_specific_reset+0xa8/0xf0 [ 442.659913] [c000000f6dc3fa00] [c0000000004448c4] .__pci_dev_reset+0x44/0x430 [ 442.659980] [c000000f6dc3fab0] [c000000000444d5c] .pci_reset_function+0x7c/0xc0 [ 442.660059] [c000000f6dc3fb30] [d00000001c141ab8] .vfio_pci_open+0xe8/0x2b0 [vfio_pci] [ 442.660139] [c000000f6dc3fbd0] [c000000000586c30] .vfio_group_fops_unl_ioctl+0x3a0/0x630 [ 442.660219] [c000000f6dc3fc90] [c000000000255fbc] .do_vfs_ioctl+0x4ec/0x7c0 [ 442.660286] [c000000f6dc3fd80] [c000000000256364] .SyS_ioctl+0xd4/0xf0 [ 442.660354] [c000000f6dc3fe30] [c000000000009e54] syscall_exit+0x0/0x98 [ 442.660420] Instruction dump: [ 442.660454] 4bfffce9 4bfffee4 7c0802a6 fbc1fff0 fbe1fff8 f8010010 f821ff81 7c7e1b78 [ 442.660566] 7c9f2378 60000000 60000000 e93e02c8 <e8690060> 2fa30000 41de00c4 2b9f0002 [ 442.660679] ---[ end trace a64ac9546bcf0328 ]--- [ 442.660724] The reason is current VF is not EEH enabled. This patch introduces a macro to convert eeh_dev to eeh_pe. By doing so, it will prevent converting with NULL pointer. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: Michael Ellerman <mpe@ellerman.id.au> V3 -> V4: 1. move the macro definition from include/linux/pci.h to arch/powerpc/include/asm/eeh.h V2 -> V3: 1. rebased on 3.17-rc4 2. introduce a macro 3. use this macro in several other places V1 -> V2: 1. code style and patch subject adjustment Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc: Emulate icbi, mcrf and conditional-trap instructionsPaul Mackerras1-0/+1
This extends the instruction emulation done by analyse_instr() and emulate_step() to handle a few more instructions that are found in the kernel. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc: Split out instruction analysis part of emulate_step()Paul Mackerras1-0/+61
This splits out the instruction analysis part of emulate_step() into a separate analyse_instr() function, which decodes the instruction, but doesn't execute any load or store instructions. It does execute integer instructions and branches which can be executed purely by updating register values in the pt_regs struct. For other instructions, it returns the instruction type and other details in a new instruction_op struct. emulate_step() then uses that information to execute loads, stores, cache operations, mfmsr, mtmsr[d], and (on 64-bit) sc instructions. The reason for doing this is so that the KVM code can use it instead of having its own separate instruction emulation code. Possibly the alignment interrupt handler could also use this. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc/powernv: Don't call generic code on offline cpusPaul Mackerras1-0/+1
On PowerNV platforms, when a CPU is offline, we put it into nap mode. It's possible that the CPU wakes up from nap mode while it is still offline due to a stray IPI. A misdirected device interrupt could also potentially cause it to wake up. In that circumstance, we need to clear the interrupt so that the CPU can go back to nap mode. In the past the clearing of the interrupt was accomplished by briefly enabling interrupts and allowing the normal interrupt handling code (do_IRQ() etc.) to handle the interrupt. This has the problem that this code calls irq_enter() and irq_exit(), which call functions such as account_system_vtime() which use RCU internally. Use of RCU is not permitted on offline CPUs and will trigger errors if RCU checking is enabled. To avoid calling into any generic code which might use RCU, we adopt a different method of clearing interrupts on offline CPUs. Since we are on the PowerNV platform, we know that the system interrupt controller is a XICS being driven directly (i.e. not via hcalls) by the kernel. Hence this adds a new icp_native_flush_interrupt() function to the native-mode XICS driver and arranges to call that when an offline CPU is woken from nap. This new function reads the interrupt from the XICS. If it is an IPI, it clears the IPI; if it is a device interrupt, it prints a warning and disables the source. Then it does the end-of-interrupt processing for the interrupt. The other thing that briefly enabling interrupts did was to check and clear the irq_happened flag in this CPU's PACA. Therefore, after flushing the interrupt from the XICS, we also clear all bits except the PACA_IRQ_HARD_DIS (interrupts are hard disabled) bit from the irq_happened flag. The PACA_IRQ_HARD_DIS flag is set by power7_nap() and is left set to indicate that interrupts are hard disabled. This means we then have to ignore that flag in power7_nap(), which is reasonable since it doesn't indicate that any interrupt event needs servicing. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc: Move htab_remove_mapping function prototype into header fileAnton Blanchard1-0/+2
A recent patch added a function prototype for htab_remove_mapping in c code. Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc: Remove stale function prototypesAnton Blanchard10-19/+0
There were a number of prototypes for functions that no longer exist. Remove them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-25powerpc/powernv: Add OPAL check token callMichael Neuling1-0/+2
Currently there is no way to generically check if an OPAL call exists or not from the host kernel. This adds an OPAL call opal_check_token() which tells you if the given token is present in OPAL or not. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-24Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm-nextPaolo Bonzini5-17/+27
Patch queue for ppc - 2014-09-24 New awesome things in this release: - E500: e6500 core support - E500: guest and remote debug support - Book3S: remote sw breakpoint support - Book3S: HV: Minor bugfixes Alexander Graf (1): KVM: PPC: Pass enum to kvmppc_get_last_inst Bharat Bhushan (8): KVM: PPC: BOOKE: allow debug interrupt at "debug level" KVM: PPC: BOOKE : Emulate rfdi instruction KVM: PPC: BOOKE: Allow guest to change MSR_DE KVM: PPC: BOOKE: Clear guest dbsr in userspace exit KVM_EXIT_DEBUG KVM: PPC: BOOKE: Guest and hardware visible debug registers are same KVM: PPC: BOOKE: Add one reg interface for DBSR KVM: PPC: BOOKE: Add one_reg documentation of SPRG9 and DBSR KVM: PPC: BOOKE: Emulate debug registers and exception Madhavan Srinivasan (2): powerpc/kvm: support to handle sw breakpoint powerpc/kvm: common sw breakpoint instr across ppc Michael Neuling (1): KVM: PPC: Book3S HV: Add register name when loading toc Mihai Caraman (10): powerpc/booke: Restrict SPE exception handlers to e200/e500 cores powerpc/booke: Revert SPE/AltiVec common defines for interrupt numbers KVM: PPC: Book3E: Increase FPU laziness KVM: PPC: Book3e: Add AltiVec support KVM: PPC: Make ONE_REG powerpc generic KVM: PPC: Move ONE_REG AltiVec support to powerpc KVM: PPC: Remove the tasklet used by the hrtimer KVM: PPC: Remove shared defines for SPE and AltiVec interrupts KVM: PPC: e500mc: Add support for single threaded vcpus on e6500 core KVM: PPC: Book3E: Enable e6500 core Paul Mackerras (2): KVM: PPC: Book3S HV: Increase timeout for grabbing secondary threads KVM: PPC: Book3S HV: Only accept host PVR value for guest PVR
2014-09-24kvm: Add arch specific mmu notifier for page invalidationTang Chen1-0/+5
This will be used to let the guest run while the APIC access page is not pinned. Because subsequent patches will fill in the function for x86, place the (still empty) x86 implementation in the x86.c file instead of adding an inline function in kvm_host.h. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24kvm: Fix page ageing bugsAndres Lagar-Cavilla2-2/+2
1. We were calling clear_flush_young_notify in unmap_one, but we are within an mmu notifier invalidate range scope. The spte exists no more (due to range_start) and the accessed bit info has already been propagated (due to kvm_pfn_set_accessed). Simply call clear_flush_young. 2. We clear_flush_young on a primary MMU PMD, but this may be mapped as a collection of PTEs by the secondary MMU (e.g. during log-dirty). This required expanding the interface of the clear_flush_young mmu notifier, so a lot of code has been trivially touched. 3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate the access bit by blowing the spte. This requires proper synchronizing with MMU notifier consumers, like every other removal of spte's does. Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-23sparc: simplify syscall_get_arch()Eric Paris1-8/+2
Include linux/thread_info.h so we can use is_32_bit_task() cleanly. Then just simplify syscall_get_arch() since is_32_bit_task() works for all configuration options. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-09-23ARCH: AUDIT: implement syscall_get_arch for all archesEric Paris1-0/+12
For all arches which support audit implement syscall_get_arch() They are all pretty easy and straight forward, stolen from how the call to audit_syscall_entry() determines the arch. Based-on-patch-by: Richard Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: linux-ia64@vger.kernel.org Cc: microblaze-uclinux@itee.uq.edu.au Cc: linux-mips@linux-mips.org Cc: linux@lists.openrisc.net Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org
2014-09-22powerpc/kvm: common sw breakpoint instr across ppcMadhavan Srinivasan1-2/+0
This patch extends the use of illegal instruction as software breakpoint instruction across the ppc platform. Patch extends booke program interrupt code to support software breakpoint. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [agraf: Fix bookehv] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22powerpc/kvm: support to handle sw breakpointMadhavan Srinivasan1-0/+6
This patch adds kernel side support for software breakpoint. Design is that, by using an illegal instruction, we trap to hypervisor via Emulation Assistance interrupt, where we check for the illegal instruction and accordingly we return to Host or Guest. Patch also adds support for software breakpoint in PR KVM. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: e500mc: Add support for single threaded vcpus on e6500 coreMihai Caraman1-1/+4
ePAPR represents hardware threads as cpu node properties in device tree. So with existing QEMU, hardware threads are simply exposed as vcpus with one hardware thread. The e6500 core shares TLBs between hardware threads. Without tlb write conditional instruction, the Linux kernel uses per core mechanisms to protect against duplicate TLB entries. The guest is unable to detect real siblings threads, so it can't use the TLB protection mechanism. An alternative solution is to use the hypervisor to allocate different lpids to guest's vcpus that runs simultaneous on real siblings threads. On systems with two threads per core this patch halves the size of the lpid pool that the allocator sees and use two lpids per VM. Use even numbers to speedup vcpu lpid computation with consecutive lpids per VM: vm1 will use lpids 2 and 3, vm2 lpids 4 and 5, and so on. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: fix spelling] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: Remove shared defines for SPE and AltiVec interruptsMihai Caraman1-10/+10
We currently decide at compile-time which of the SPE or AltiVec units to support exclusively. Guard kernel defines with CONFIG_SPE_POSSIBLE and CONFIG_PPC_E500MC and remove shared defines. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: Remove the tasklet used by the hrtimerMihai Caraman2-2/+1
Powerpc timer implementation is a copycat version of s390. Now that they removed the tasklet with commit ea74c0ea1b24a6978a6ebc80ba4dbc7b7848b32d follow this optimization. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: BOOKE: Emulate debug registers and exceptionBharat Bhushan2-0/+5
This patch emulates debug registers and debug exception to support guest using debug resource. This enables running gdb/kgdb etc in guest. On BOOKE architecture we cannot share debug resources between QEMU and guest because: When QEMU is using debug resources then debug exception must be always enabled. To achieve this we set MSR_DE and also set MSRP_DEP so guest cannot change MSR_DE. When emulating debug resource for guest we want guest to control MSR_DE (enable/disable debug interrupt on need). So above mentioned two configuration cannot be supported at the same time. So the result is that we cannot share debug resources between QEMU and Guest on BOOKE architecture. In the current design QEMU gets priority over guest, this means that if QEMU is using debug resources then guest cannot use them and if guest is using debug resource then QEMU can overwrite them. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: BOOKE: Guest and hardware visible debug registers are sameBharat Bhushan1-2/+0
Guest visible debug register and hardware visible debug registers are same, so ther is no need to have arch->shadow_dbg_reg, instead use arch->dbg_reg. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-22KVM: PPC: BOOKE : Emulate rfdi instructionBharat Bhushan1-0/+1
This patch adds "rfdi" instruction emulation which is required for guest debug hander on BOOKE-HV Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-19Revert "powerpc/fsl_msi: spread msi ints across different MSIRs"Scott Wood1-2/+0
This reverts commit c822e73731fce3b49a4887140878d084d8a44c08. This commit conflicted with a bitmap allocator change that partially accomplishes the same thing, but which does so more correctly. Revert this one until it can be respun on top of the correct change. Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-13irq_work: Introduce arch_irq_work_has_interrupt()Peter Zijlstra1-0/+1
The nohz full code needs irq work to trigger its own interrupt so that the subsystem can work even when the tick is stopped. Lets introduce arch_irq_work_has_interrupt() that archs can override to tell about their support for this ability. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-09-09powerpc: Wire up sys_seccomp(), sys_getrandom() and sys_memfd_create()Pranith Kumar2-1/+4
This patch wires up three new syscalls for powerpc. The three new syscalls are seccomp, getrandom and memfd_create. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-09-09powerpc/perf: Fix ABIv2 kernel backtracesAnton Blanchard1-0/+7
ABIv2 kernels are failing to backtrace through the kernel. An example: 39.30% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry __GI___libc_read The problem is in valid_next_sp() where we check that the new stack pointer is at least STACK_FRAME_OVERHEAD below the previous one. ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes with no paramter save area. STACK_FRAME_OVERHEAD is in theory the minimum stack frame size, but we over 240 uses of it, some of which assume that it includes space for the parameter area. We need to work through all our stack defines and rationalise them but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using in valid_next_sp(). This fixes the issue: 30.64% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry pagecache_get_page generic_file_read_iter new_sync_read vfs_read sys_read syscall_exit __GI___libc_read Cc: stable@vger.kernel.org # 3.16+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org>
2014-09-04powerpc/8xx: Declare SPRG2 as a SCRATCH registerLEROY Christophe1-1/+2
Since commit 469d62be9263b92f2c3329540cbb1c076111f4f3, SPRG2 is used as a scratch register just like SPRG0 and SPRG1. So Declare it as such and fix the comment which is not valid anymore since that commit. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-04powerpc/fsl_msi: spread msi ints across different MSIRsTudor Laurentiu1-0/+2
Allocate msis such that each time a new interrupt is requested, the SRS (MSIR register select) to be used is allocated in a round-robin fashion. The end result is that the msi interrupts will be spread across distinct MSIRs with the main benefit that now users can set affinity to each msi int through the mpic irq backing up the MSIR register. This is achieved with the help of a newly introduced msi bitmap api that allows specifying the starting point when searching for a free msi interrupt. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-09-03powerpc: Dynamic DMA zone limitsScott Wood1-0/+3
Platform code can call limit_zone_pfn() to set appropriate limits for ZONE_DMA and ZONE_DMA32, and dma_direct_alloc_coherent() will select a suitable zone based on a device's mask and the pfn limits that platform code has configured. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
2014-08-29KVM: remove garbage arg to *hardware_{en,dis}ableRadim Krčmář1-1/+1
In the beggining was on_each_cpu(), which required an unused argument to kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten. Remove unnecessary arguments that stem from this. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: static inline empty kvm_arch functionsRadim Krčmář1-0/+8
Using static inline is going to save few bytes and cycles. For example on powerpc, the difference is 700 B after stripping. (5 kB before) This patch also deals with two overlooked empty functions: kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c 2df72e9bc KVM: split kvm_arch_flush_shadow and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c. e790d9ef6 KVM: add kvm_arch_sched_in Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: forward declare structs in kvm_types.hPaolo Bonzini1-5/+0
Opaque KVM structs are useful for prototypes in asm/kvm_host.h, to avoid "'struct foo' declared inside parameter list" warnings (and consequent breakage due to conflicting types). Move them from individual files to a generic place in linux/kvm_types.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-27Revert "powerpc: Replace __get_cpu_var uses"Tejun Heo3-9/+7
This reverts commit 5828f666c069af74e00db21559f1535103c9f79a due to build failure after merging with pending powerpc changes. Link: http://lkml.kernel.org/g/20140827142243.6277eaff@canb.auug.org.au Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-26powerpc: Replace __get_cpu_var usesChristoph Lameter3-7/+9
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) tj: Folded a fix patch. http://lkml.kernel.org/g/alpine.DEB.2.11.1408172143020.9652@gentwo.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26alpha: Replace __get_cpu_varChristoph Lameter1-3/+3
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-14locking,arch,powerpc: Fold atomic_opsPeter Zijlstra1-120/+76
Many of the atomic op implementations are the same except for one instruction; fold the lot into a few CPP macros and reduce LoC. Requires asm_op because PPC asm is weird :-) Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140508135852.713980957@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-13powerpc/mm: Use read barrier when creating real_pteAneesh Kumar K.V1-5/+25
On ppc64 we support 4K hash pte with 64K page size. That requires us to track the hash pte slot information on a per 4k basis. We do that by storing the slot details in the second half of pte page. The pte bit _PAGE_COMBO is used to indicate whether the second half need to be looked while building real_pte. We need to use read memory barrier while doing that so that load of hidx is not reordered w.r.t _PAGE_COMBO check. On the store side we already do a lwsync in __hash_page_4K CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Handle combo pages in invalidateAneesh Kumar K.V1-1/+1
If we changed base page size of the segment, either via sub_page_protect or via remap_4k_pfn, we do a demote_segment which doesn't flush the hash table entries. We do a lazy hash page table flush for all mapped pages in the demoted segment. This happens when we handle hash page fault for these pages. We use _PAGE_COMBO bit along with _PAGE_HASHPTE to indicate whether a pte is backed by 4K hash pte. If we find _PAGE_COMBO not set on the pte, that implies that we could possibly have older 64K hash pte entries in the hash page table and we need to invalidate those entries. Use _PAGE_COMBO to determine the page size with which we should invalidate the hash table entries on unmap. CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/thp: Don't recompute vsid and ssize in loop on invalidateAneesh Kumar K.V1-3/+3
The segment identifier and segment size will remain the same in the loop, So we can compute it outside. We also change the hugepage_invalidate interface so that we can use it the later patch CC: <stable@vger.kernel.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: remove duplicate definition of TEXASR_FSNishanth Aravamudan1-2/+1
It appears that commits 7f06f21d40a6 ("powerpc/tm: Add checking to treclaim/trechkpt") and e4e38121507a ("KVM: PPC: Book3S HV: Add transactional memory support") both added definitions of TEXASR_FS. Remove one of them. At the same time, fix the alignment of the remaining definition (should be tab-separated like the rest of the #defines). Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc/powernv: Interface to register/unregister opal dump regionVasant Hegde1-0/+11
PowerNV platform is capable of capturing host memory region when system crashes (because of host/firmware). We have new OPAL API to register/ unregister memory region to be captured when system crashes. This patch adds support for new API. Also during boot time we register kernel log buffer and unregister before doing kexec. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYSMichael Ellerman1-2/+4
We have been a bit slack about updating the CPU_FTRS_POSSIBLE and CPU_FTRS_ALWAYS masks. When we added POWER8, and also POWER8E we forgot to update the ALWAYS mask. And when we added POWER8_DD1 we forgot to update both the POSSIBLE and ALWAYS masks. Luckily this hasn't caused any actual bugs AFAICS. Failing to update the ALWAYS mask just forgoes a potential optimisation opportunity. Failing to update the POSSIBLE mask for POWER8_DD1 is also OK because it only removes a bit rather than adding any. Regardless they should all be in both masks so as to avoid any future bugs when the set of ALWAYS/POSSIBLE bits changes, or the masks themselves change. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Neuling <mikey@neuling.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13powerpc: Add smp_mb() to arch_spin_is_locked()Michael Ellerman1-0/+1
The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-08Merge branch 'akpm' (second patchbomb from Andrew Morton)Linus Torvalds3-20/+1
Merge more incoming from Andrew Morton: "Two new syscalls: memfd_create in "shm: add memfd_create() syscall" kexec_file_load in "kexec: implementation of new syscall kexec_file_load" And: - Most (all?) of the rest of MM - Lots of the usual misc bits - fs/autofs4 - drivers/rtc - fs/nilfs - procfs - fork.c, exec.c - more in lib/ - rapidio - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs, fs/cramfs, fs/romfs, fs/qnx6. - initrd/initramfs work - "file sealing" and the memfd_create() syscall, in tmpfs - add pci_zalloc_consistent, use it in lots of places - MAINTAINERS maintenance - kexec feature work" * emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits) MAINTAINERS: update nomadik patterns MAINTAINERS: update usb/gadget patterns MAINTAINERS: update DMA BUFFER SHARING patterns kexec: verify the signature of signed PE bzImage kexec: support kexec/kdump on EFI systems kexec: support for kexec on panic using new system call kexec-bzImage64: support for loading bzImage using 64bit entry kexec: load and relocate purgatory at kernel load time purgatory: core purgatory functionality purgatory/sha256: provide implementation of sha256 in purgaotory context kexec: implementation of new syscall kexec_file_load kexec: new syscall kexec_file_load() declaration kexec: make kexec_segment user buffer pointer a union resource: provide new functions to walk through resources kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc() kexec: move segment verification code in a separate function kexec: rename unusebale_pages to unusable_pages kernel: build bin2c based on config option CONFIG_BUILD_BIN2C bin2c: move bin2c in scripts/basic shm: wait for pins to be released when sealing ...
2014-08-08arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate areaAndy Lutomirski1-3/+0
The core mm code will provide a default gate area based on FIXADDR_USER_START and FIXADDR_USER_END if !defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR). This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit UML, and x86_32 have their own code just to disable it. arm, 32-bit UML, and x86_64 have gate areas, but they have their own implementations. This gets rid of the default and moves the code into ia64. This should save some code on architectures without a gate area: it's now possible to inline the gate_area functions in the default case. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle] Acked-by: Richard Weinberger <richard@nod.at> [for um] Acked-by: Will Deacon <will.deacon@arm.com> [for arm64] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nathan Lynch <Nathan_Lynch@mentor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08lib/scatterlist: make ARCH_HAS_SG_CHAIN an actual KconfigLaura Abbott2-17/+1
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an architecture specific scatterlist.h, make it a proper Kconfig option and use that instead. At same time, remove the header files are are now mostly useless and just include asm-generic/scatterlist.h. [sfr@canb.auug.org.au: powerpc files now need asm/dma.h] Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds14-142/+230
Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ...
2014-08-07Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds26-186/+326
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-08-05Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvmPaolo Bonzini14-142/+230
Patch queue for ppc - 2014-08-01 Highlights in this release include: - BookE: Rework instruction fetch, not racy anymore now - BookE HV: Fix ONE_REG accessors for some in-hardware registers - Book3S: Good number of LE host fixes, enable HV on LE - Book3S: Some misc bug fixes - Book3S HV: Add in-guest debug support - Book3S HV: Preload cache lines on context switch - Remove 440 support Alexander Graf (31): KVM: PPC: Book3s PR: Disable AIL mode with OPAL KVM: PPC: Book3s HV: Fix tlbie compile error KVM: PPC: Book3S PR: Handle hyp doorbell exits KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Book3S PR: Fix sparse endian checks PPC: Add asm helpers for BE 32bit load/store KVM: PPC: Book3S HV: Make HTAB code LE host aware KVM: PPC: Book3S HV: Access guest VPA in BE KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE KVM: PPC: Book3S HV: Access XICS in BE KVM: PPC: Book3S HV: Fix ABIv2 on LE KVM: PPC: Book3S HV: Enable for little endian hosts KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct KVM: PPC: Deflect page write faults properly in kvmppc_st KVM: PPC: Book3S: Stop PTE lookup on write errors KVM: PPC: Book3S: Add hack for split real mode KVM: PPC: Book3S: Make magic page properly 4k mappable KVM: PPC: Remove 440 support KVM: Rename and add argument to check_extension KVM: Allow KVM_CHECK_EXTENSION on the vm fd KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode KVM: PPC: Implement kvmppc_xlate for all targets KVM: PPC: Move kvmppc_ld/st to common code KVM: PPC: Remove kvmppc_bad_hva() KVM: PPC: Use kvm_read_guest in kvmppc_ld KVM: PPC: Handle magic page in kvmppc_ld/st KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Remove DCR handling KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: PR: Handle FSCR feature deselects Alexey Kardashevskiy (1): KVM: PPC: Book3S: Fix LPCR one_reg interface Aneesh Kumar K.V (4): KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation KVM: PPC: BOOK3S: PR: Emulate virtual timebase register KVM: PPC: BOOK3S: PR: Emulate instruction counter KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page Anton Blanchard (2): KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() Bharat Bhushan (10): kvm: ppc: bookehv: Added wrapper macros for shadow registers kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1 kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR kvm: ppc: booke: Add shared struct helpers of SPRN_ESR kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7 kvm: ppc: Add SPRN_EPR get helper function kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit KVM: PPC: Booke-hv: Add one reg interface for SPRG9 KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr Michael Neuling (1): KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling Mihai Caraman (8): KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule KVM: PPC: e500: Fix default tlb for victim hint KVM: PPC: e500: Emulate power management control SPR KVM: PPC: e500mc: Revert "add load inst fixup" KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1 KVM: PPC: Book3s: Remove kvmppc_read_inst() function KVM: PPC: Allow kvmppc_get_last_inst() to fail KVM: PPC: Bookehv: Get vcpu's last instruction for emulation Paul Mackerras (4): KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication Stewart Smith (2): Split out struct kvmppc_vcore creation to separate function Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8 Conflicts: Documentation/virtual/kvm/api.txt
2014-08-05powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTEMadhusudanan Kandasamy1-2/+3
remap_4k_pfn() silently truncates upper bits of input 4K PFN if it cannot be contained in PTE. This leads invalid memory mapping and could result in a system crash when the memory is accessed. This patch fails remap_4k_pfn() and returns -EINVAL if the input 4K PFN cannot be contained in PTE. V3 : Added parentheses to protect 'pfn' and entire macro as suggested by Brian. V2 : Rewritten to avoid helper function as suggested by Stephen Rothwell. Signed-off-by: Madhusudanan Kandasamy <kmadhu@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/powernv: Invoke opal call to handle hmi.Mahesh Salgaonkar2-0/+48
When we hit the HMI in Linux, invoke opal call to handle/recover from HMI errors in real mode and then in virtual mode during check_irq_replay() invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from OPAL and act accordingly. Now that we are ready to handle HMI interrupt directly in linux, remove the HMI interrupt registration with firmware. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-05powerpc/book3s: Add basic infrastructure to handle HMI in Linux.Mahesh Salgaonkar6-0/+11
Handle Hypervisor Maintenance Interrupt (HMI) in Linux. This patch implements basic infrastructure to handle HMI in Linux host. The design is to invoke opal handle hmi in real mode for recovery and set irq_pending when we hit HMI. During check_irq_replay pull opal hmi event and print hmi info on console. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.