| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Although Linux doesn't use PURR and SPURR ((Scaled) Processor
Utilization of Resources Register), other OSes depend on them.
On POWER8 they count at a rate depending on whether the VCPU is
idle or running, the activity of the VCPU, and the value in the
RWMR (Region-Weighting Mode Register). Hardware expects the
hypervisor to update the RWMR when a core is dispatched to reflect
the number of online VCPUs in the vcore.
This adds code to maintain a count in the vcore struct indicating
how many VCPUs are online. In kvmppc_run_core we use that count
to set the RWMR register on POWER8. If the core is split because
of a static or dynamic micro-threading mode, we use the value for
8 threads. The RWMR value is not relevant when the host is
executing because Linux does not use the PURR or SPURR register,
so we don't bother saving and restoring the host value.
For the sake of old userspace which does not set the KVM_REG_PPC_ONLINE
register, we set online to 1 if it was 0 at the time of a KVM_RUN
ioctl.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This adds a new KVM_REG_PPC_ONLINE register which userspace can set
to 0 or 1 via the GET/SET_ONE_REG interface to indicate whether it
considers the VCPU to be offline (0), that is, not currently running,
or online (1). This will be used in a later patch to configure the
register which controls PURR and SPURR accumulation.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Currently, the HV KVM guest entry/exit code adds the timebase offset
from the vcore struct to the timebase on guest entry, and subtracts
it on guest exit. Which is fine, except that it is possible for
userspace to change the offset using the SET_ONE_REG interface while
the vcore is running, as there is only one timebase offset per vcore
but potentially multiple VCPUs in the vcore. If that were to happen,
KVM would subtract a different offset on guest exit from that which
it had added on guest entry, leading to the timebase being out of sync
between cores in the host, which then leads to bad things happening
such as hangs and spurious watchdog timeouts.
To fix this, we add a new field 'tb_offset_applied' to the vcore struct
which stores the offset that is currently applied to the timebase.
This value is set from the vcore tb_offset field on guest entry, and
is what is subtracted from the timebase on guest exit. Since it is
zero when the timebase offset is not applied, we can simplify the
logic in kvmhv_start_timing and kvmhv_accumulate_time.
In addition, we had secondary threads reading the timebase while
running concurrently with code on the primary thread which would
eventually add or subtract the timebase offset from the timebase.
This occurred while saving or restoring the DEC register value on
the secondary threads. Although no specific incorrect behaviour has
been observed, this is a race which should be fixed. To fix it, we
move the DEC saving code to just before we call kvmhv_commence_exit,
and the DEC restoring code to after the point where we have waited
for the primary thread to switch the MMU context and add the timebase
offset. That way we are sure that the timebase contains the guest
timebase value in both cases.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Implement a local TLB flush for invalidating an LPID with variants for
process or partition scope. And a global TLB flush for invalidating
a partition scoped page of an LPID.
These will be used by KVM in subsequent patches.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Instead of encoding shift in the table address, use an enumerated index value.
This allow us to do different things in the callback for pte and pmd.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
4K config use one full page at level 4 of the pagetable. Add support for single
fragment allocation in pagetable fragment code and and use that for 4K config.
This makes both 4k and 64k use the same code path. Later we will switch pmd to
use the page table fragment code. This is done only for 64bit platforms which
is using page table fragment support.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Now that we have removed 64K page size support, the RCU page table free can
be much simpler for nohash. Make a copy of the the rcu callback to pgalloc.h
header similar to nohash 32. We could possibly merge 32 and 64 bit there. But
that is for a later patch
We also move the book3s specific handler to pgtable_book3s64.c. This will be
updated in a later patch to handle split pmd ptlock.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have in Kconfig
config PPC_64K_PAGES
bool "64k page size"
depends on !PPC_FSL_BOOK3E && (44x || PPC_BOOK3S_64 || PPC_BOOK3E_64)
select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
Only supported BOOK3E 64 bit platforms is FSL_BOOK3E. Remove the dead 64k page
support code from 64bit nohash.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This driver is a logical device which provides an
interface between the hypervisor and a management
partition. This interface is like a message
passing interface. This management partition
is intended to provide an alternative to HMC-based
system management.
VMC enables the Management LPAR to provide basic
logical partition functions:
- Logical Partition Configuration
- Boot, start, and stop actions for individual
partitions
- Display of partition status
- Management of virtual Ethernet
- Management of virtual Storage
- Basic system management
This driver is to be used for the POWER Virtual
Management Channel Virtual Adapter on the PowerPC
platform. It provides a character device which
allows for both request/response and async message
support through the /dev/ibmvmc node.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Reviewed-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Reviewed-by: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Taylor Jakobson <tjakobs@us.ibm.com>
Tested-by: Brad Warrum <bwarrum@us.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the ad-hoc implementation, the generic code now allows us not to
reinvent the wheel.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1525786706-22846-9-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
it had always been pointless - compat_sys_select() sign-extends
the first argument just fine on its own.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[mpe: Use COMPAT_SPU_NEW() to keep systbl_chk.sh happy]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[mpe: Update sys_ni.c for s/ppc_rtas/sys_rtas/]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[mpe: Fix sys_debug_setcontext() prototype to return long]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The hcall_exit() tracepoint has retval defined as unsigned long. That
leads to humours results like:
bash-3686 [009] d..2 854.134094: hcall_entry: opcode=24
bash-3686 [009] d..2 854.134095: hcall_exit: opcode=24 retval=18446744073709551609
It's normal for some hcalls to return negative values, displaying them
as unsigned isn't very helpful. So change it to signed.
bash-3711 [001] d..2 471.691008: hcall_entry: opcode=24
bash-3711 [001] d..2 471.691008: hcall_exit: opcode=24 retval=-7
Which can be more easily compared to H_NOT_FOUND in hvcall.h
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
|
|
Now that we've updated the generic headers to support 5 PKEY bits for
powerpc we don't need our own #defines in arch code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Consolidate the pkey handling by providing a common empty definition
of vma_pkey() in pkeys.h when CONFIG_ARCH_HAS_PKEYS=n.
This also removes another entanglement of pkeys.h and
asm/mmu_context.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
|
|
VM_PKEY_BITx are defined only if CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
is enabled. Powerpc also needs these bits. Hence lets define the
VM_PKEY_BITx bits for any architecture that enables
CONFIG_ARCH_HAS_PKEYS.
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The build is failing with CONFIG_NUMA=n and some compiler versions:
arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_online_cpu':
hotplug-cpu.c:(.text+0x12c): undefined reference to `timed_topology_update'
arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_cpu_remove':
hotplug-cpu.c:(.text+0x400): undefined reference to `timed_topology_update'
Fix it by moving the empty version of timed_topology_update() into the
existing #ifdef block, which has the right guard of SPLPAR && NUMA.
Fixes: cee5405da402 ("powerpc/hotplug: Improve responsiveness of hotplug change")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some syscall entry functions on powerpc are prefixed with
ppc_/ppc32_/ppc64_ rather than the usual sys_/__se_sys prefix. fork(),
clone(), swapcontext() are some examples of syscalls with such entry
points. We need to match against these names when initializing ftrace
syscall tracing.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
On powerpc64 ABIv1, we are enabling syscall tracing for only ~20
syscalls. This is due to commit e145242ea0df6 ("syscalls/core,
syscalls/x86: Clean up syscall stub naming convention") which has
changed the syscall entry wrapper prefix from "SyS" to "__se_sys".
Update the logic for ABIv1 to not just skip the initial dot, but also
the "__se_sys" prefix.
Fixes: commit e145242ea0df6 ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In commit 4e26bc4a4ed6 ("powerpc/64: Rename soft_enabled to
irq_soft_mask") we renamed paca->soft_enabled. But then in commit
8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are not
virtualized") we added it back. Oops. This happened because the two
patches were in flight at the same time and rebased vs each other
multiple times, and we missed it in review.
Fixes: 8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are not virtualized")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
By using IS_ENABLED() we can simplify __set_pte_at() by removing
redundant *ptep = pte.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
_PAGE_BUSY is always 0, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When nohash and book3s header were split, some hash related stuff
remained in the nohash header. This patch removes them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Duplicate pte_young() to avoid circular header dependency]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
FADump capture kernel boots in restricted memory environment preserving
the context of previous kernel to save vmcore. Supporting hugepages in
such environment makes things unnecessarily complicated, as hugepages
need memory set aside for them. This means most of the capture kernel's
memory is used in supporting hugepages. In most cases, this results in
out-of-memory issues while booting FADump capture kernel. But hugepages
are not of much use in capture kernel whose only job is to save vmcore.
So, disabling hugepages support, when fadump is active, is a reliable
solution for the out of memory issues. Introducing a flag variable to
disable HugeTLB support when fadump is active.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We've had dynamic ftrace support for over 9 years since Steve first
wrote it, all the distros use dynamic, and static is basically
untested these days, so drop support for static ftrace.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
With -mprofile-kernel, we always save the full register state in
ftrace_caller(). While this works, this is inefficient if we're not
interested in the register state, such as when we're using the function
tracer.
Rename the existing ftrace_caller() as ftrace_regs_caller() and provide
a simpler implementation for ftrace_caller() that is used when registers
are not required to be saved.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add some helpers to enable/disable ftrace through paca->ftrace_enabled.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Re-arrange the last #ifdef section in preparation for a subsequent
change.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We have some C code that we call into from real mode where we cannot
take any exceptions. Though the C functions themselves are mostly safe,
if these functions are traced, there is a possibility that we may take
an exception. For instance, in certain conditions, the ftrace code uses
WARN(), which uses a 'trap' to do its job.
For such scenarios, introduce a new field in paca 'ftrace_enabled',
which is checked on ftrace entry before continuing. This field can then
be set to zero to disable/pause ftrace, and set to a non-zero value to
resume ftrace.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pick up urgent fixes to apply dependent cleanup patch
|
|
Using an si_code of 0 that aliases with SI_USER is clearly the wrong
thing todo, and causes problems in interesting ways.
For use in unknown_exception the recently defined TRAP_UNK
semantically is a perfect fit. For use in RunModeException it looks
like something more specific than TRAP_UNK could be used. No one has
bothered to find a better fit than the broken si_code of 0 in all of
these years and I don't see an obvious better fit so TRAP_UNK is
switching RunModeException to return TRAP_UNK is clearly an
improvement.
Recent history suggests no actually cares about crazy corner
cases of the kernel behavior like this so I don't expect any
regressions from changing this. However if something does
happen this change is easy to revert.
Though I wonder if SIGKILL might not be a better fit.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Fixes: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Using an si_code of 0 that aliases with SI_USER is clearly the
wrong thing todo, and causes problems in interesting ways.
The newly defined FPE_FLTUNK semantically appears to fit the
bill so use it instead.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Fixes: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Fixes: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There is a single npu context per set of callback parameters. Callers
should be prevented from overwriting existing callback values so
instead return an error if different parameters are passed.
Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Mark Hairgrove <mhairgrove@nvidia.com>
Tested-by: Mark Hairgrove <mhairgrove@nvidia.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
powerpc, uses a nonstandard variation of the generic sysvipc
data structures, intended to have the padding moved around
so it can deal with big-endian 32-bit user space that has
64-bit time_t.
powerpc has the same definition as parisc and sparc, but now also
supports little-endian mode, which is now wrong because the
padding is made for big-endian user space.
This takes just take the same approach here that we have for
the asm-generic headers and adds separate 32-bit fields for the
upper halves of the timestamps, to let libc deal with the mess
in user space.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All the current architecture specific defines for these
are the same. Refactor these common defines to a common
header file.
The new common linux/compat_time.h is also useful as it
will eventually be used to hold all the defines that
are needed for compat time types that support non y2038
safe types. New architectures need not have to define these
new types as they will only use new y2038 safe syscalls.
This file can be deleted after y2038 when we stop supporting
non y2038 safe syscalls.
The patch also requires an operation similar to:
git grep "asm/compat\.h" | cut -d ":" -f 1 | xargs -n 1 sed -i -e "s%asm/compat.h%linux/compat.h%g"
Cc: acme@kernel.org
Cc: benh@kernel.crashing.org
Cc: borntraeger@de.ibm.com
Cc: catalin.marinas@arm.com
Cc: cmetcalf@mellanox.com
Cc: cohuck@redhat.com
Cc: davem@davemloft.net
Cc: deller@gmx.de
Cc: devel@driverdev.osuosl.org
Cc: gerald.schaefer@de.ibm.com
Cc: gregkh@linuxfoundation.org
Cc: heiko.carstens@de.ibm.com
Cc: hoeppner@linux.vnet.ibm.com
Cc: hpa@zytor.com
Cc: jejb@parisc-linux.org
Cc: jwi@linux.vnet.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: mingo@redhat.com
Cc: mpe@ellerman.id.au
Cc: oberpar@linux.vnet.ibm.com
Cc: oprofile-list@lists.sf.net
Cc: paulus@samba.org
Cc: peterz@infradead.org
Cc: ralf@linux-mips.org
Cc: rostedt@goodmis.org
Cc: rric@kernel.org
Cc: schwidefsky@de.ibm.com
Cc: sebott@linux.vnet.ibm.com
Cc: sparclinux@vger.kernel.org
Cc: sth@linux.vnet.ibm.com
Cc: ubraun@linux.vnet.ibm.com
Cc: will.deacon@arm.com
Cc: x86@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: James Hogan <jhogan@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when loading modules built with a different
CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic.
- Fix busy loops in the OPAL NVRAM driver if we get certain error
conditions from firmware.
- Remove tlbie trace points from KVM code that's called in real mode,
because it causes crashes.
- Fix checkstops caused by invalid tlbiel on Power9 Radix.
- Ensure the set of CPU features we "know" are always enabled is
actually the minimal set when we build with support for firmware
supplied CPU features.
Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin.
* tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features
powerpc/mm/radix: Fix checkstops caused by invalid tlbiel
KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode
powerpc/8xx: Fix build with hugetlbfs enabled
powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
powerpc/fscr: Enable interrupts earlier before calling get_user()
powerpc/64s: Fix section mismatch warnings from setup_rfi_flush()
powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic
|
|
As arch_kexec_kernel_image_{probe,load}(),
arch_kimage_file_post_load_cleanup() and arch_kexec_kernel_verify_sig()
are almost duplicated among architectures, they can be commonalized with
an architecture-defined kexec_file_ops array. So let's factor them out.
Link: http://lkml.kernel.org/r/20180306102303.9063-3-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The cpu_has_feature() mechanism has an optimisation where at build
time we construct a mask of the CPU feature bits that will always be
true for the given .config, based on the platform/bitness/etc. that we
are building for.
That is incompatible with DT CPU features, where the set of CPU
features is dependent on feature flags that are given to us by
firmware.
The result is that some feature bits can not be *disabled* by DT CPU
features. Or more accurately, they can be disabled but they will still
appear in the ALWAYS mask, meaning cpu_has_feature() will always
return true for them.
In the past this hasn't really been a problem because on Book3S
64 (where we support DT CPU features), the set of ALWAYS bits has been
very small. That was because we always built for POWER4 and later,
meaning the set of common bits was small.
The only bit that could be cleared by DT CPU features that was also in
the ALWAYS mask was CPU_FTR_NODSISRALIGN, and that was only used in
the alignment handler to create a fake DSISR. That code was itself
deleted in 31bfdb036f12 ("powerpc: Use instruction emulation
infrastructure to handle alignment faults") (Sep 2017).
However the set of ALWAYS features changed with the recent commit
db5ae1c155af ("powerpc/64s: Refine feature sets for little endian
builds") which restricted the set of feature flags when building
little endian to Power7 or later. That caused the ALWAYS mask to
become much larger for little endian builds.
The result is that the following feature bits can currently not
be *disabled* by DT CPU features:
CPU_FTR_REAL_LE, CPU_FTR_MMCRA, CPU_FTR_CTRL, CPU_FTR_SMT,
CPU_FTR_PURR, CPU_FTR_SPURR, CPU_FTR_DSCR, CPU_FTR_PKEY,
CPU_FTR_VMX_COPY, CPU_FTR_CFAR, CPU_FTR_HAS_PPR.
To fix it we need to mask the set of ALWAYS features with the base set
of DT CPU features, ie. the features that are always enabled by DT CPU
features. That way there are no bits in the ALWAYS mask that are not
also always set by DT CPU features.
Fixes: db5ae1c155af ("powerpc/64s: Refine feature sets for little endian builds")
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is the start of an effort to tidy up and standardise all the
delays. Existing loops have a range of delay/sleep periods from 1ms
to 20ms, and some have no delay. They all loop forever except rtc,
which times out after 10 retries, and that uses 10ms delays. So use
10ms as our standard delay. The OPAL maintainer agrees 10ms is a
reasonable starting point.
The idea is to use the same recipe everywhere, once this is proven to
work then it will be documented as an OPAL API standard. Then both
firmware and OS can agree, and if a particular call needs something
else, then that can be documented with reasoning.
This is not the end-all of this effort, it's just a relatively easy
change that fixes some existing high latency delays. There should be
provision for standardising timeouts and/or interruptible loops where
possible, so non-fatal firmware errors don't cause hangs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past
invalid privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as
of now)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
kvm: x86: fix a prototype warning
kvm: selftests: add sync_regs_test
kvm: selftests: add API testing infrastructure
kvm: x86: fix a compile warning
KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
KVM: X86: Introduce handle_ud()
KVM: vmx: unify adjacent #ifdefs
x86: kvm: hide the unused 'cpu' variable
KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
kvm: Add emulation for movups/movupd
KVM: VMX: raise internal error for exception during invalid protected mode state
KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
KVM: x86: Fix misleading comments on handling pending exceptions
KVM: x86: Rename interrupt.pending to interrupt.injected
KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
x86/kvm: use Enlightened VMCS when running on Hyper-V
x86/hyper-v: detect nested features
x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
...
|
|
If you build the kernel with CONFIG_RELOCATABLE=n, then install the
modules, rebuild the kernel with CONFIG_RELOCATABLE=y and leave the
old modules installed, we crash something like:
Unable to handle kernel paging request for data at address 0xd000000018d66cef
Faulting instruction address: 0xc0000000021ddd08
Oops: Kernel access of bad area, sig: 11 [#1]
Modules linked in: x_tables autofs4
CPU: 2 PID: 1 Comm: systemd Not tainted 4.16.0-rc6-gcc_ubuntu_le-g99fec39 #1
...
NIP check_version.isra.22+0x118/0x170
Call Trace:
__ksymtab_xt_unregister_table+0x58/0xfffffffffffffcb8 [x_tables] (unreliable)
resolve_symbol+0xb4/0x150
load_module+0x10e8/0x29a0
SyS_finit_module+0x110/0x140
system_call+0x58/0x6c
This happens because since commit 71810db27c1c ("modversions: treat
symbol CRCs as 32 bit quantities"), a relocatable kernel encodes and
handles symbol CRCs differently from a non-relocatable kernel.
Although it's possible we could try and detect this situation and
handle it, it's much more robust to simply make the state of
CONFIG_RELOCATABLE part of the module vermagic.
Fixes: 71810db27c1c ("modversions: treat symbol CRCs as 32 bit quantities")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for 4PB user address space on 64-bit, opt-in via mmap().
- Removal of POWER4 support, which was accidentally broken in 2016
and no one noticed, and blocked use of some modern instructions.
- Workarounds so that the hypervisor can enable Transactional Memory
on Power9.
- A series to disable the DAWR (Data Address Watchpoint Register) on
Power9.
- More information displayed in the meltdown/spectre_v1/v2 sysfs
files.
- A vpermxor (Power8 Altivec) implementation for the raid6 Q
Syndrome.
- A big series to make the allocation of our pacas (per cpu area),
kernel page tables, and per-cpu stacks NUMA aware when using the
Radix MMU on Power9.
And as usual many fixes, reworks and cleanups.
Thanks to: Aaro Koskinen, Alexandre Belloni, Alexey Kardashevskiy,
Alistair Popple, Andy Shevchenko, Aneesh Kumar K.V, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
Lombard, Cyril Bur, Daniel Axtens, Dave Young, Finn Thain, Frederic
Barrat, Gustavo Romero, Horia Geantă, Jonathan Neuschäfer, Kees Cook,
Larry Finger, Laurent Dufour, Laurent Vivier, Logan Gunthorpe,
Madhavan Srinivasan, Mark Greer, Mark Hairgrove, Markus Elfring,
Mathieu Malaterre, Matt Brown, Matt Evans, Mauricio Faria de Oliveira,
Michael Neuling, Naveen N. Rao, Nicholas Piggin, Paul Mackerras,
Philippe Bergheaud, Ram Pai, Rob Herring, Sam Bobroff, Segher
Boessenkool, Simon Guo, Simon Horman, Stewart Smith, Sukadev
Bhattiprolu, Suraj Jitindar Singh, Thiago Jung Bauermann, Vaibhav
Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wei Yongjun"
* tag 'powerpc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (207 commits)
powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep
powerpc/64s: Fix POWER9 DD2.2 and above in cputable features
powerpc/64s: Fix pkey support in dt_cpu_ftrs, add CPU_FTR_PKEY bit
powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear unwanted LPCR bits
Revert "powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead"
powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo}
powerpc: io.h: move iomap.h include so that it can use readq/writeq defs
cxl: Fix possible deadlock when processing page faults from cxllib
powerpc/hw_breakpoint: Only disable hw breakpoint if cpu supports it
powerpc/mm/radix: Update command line parsing for disable_radix
powerpc/mm/radix: Parse disable_radix commandline correctly.
powerpc/mm/hugetlb: initialize the pagetable cache correctly for hugetlb
powerpc/mm/radix: Update pte fragment count from 16 to 256 on radix
powerpc/mm/keys: Update documentation and remove unnecessary check
powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead
powerpc/64s/idle: Consolidate power9_offline_stop()/power9_idle_stop()
powerpc/powernv: Always stop secondaries before reboot/shutdown
powerpc: hard disable irqs in smp_send_stop loop
powerpc: use NMI IPI for smp_send_stop
powerpc/powernv: Fix SMT4 forcing idle code
...
|
|
Pull PCI updates from Bjorn Helgaas:
- move pci_uevent_ers() out of pci.h (Michael Ellerman)
- skip ASPM common clock warning if BIOS already configured it (Sinan
Kaya)
- fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)
- remove last user of pci_get_bus_and_slot() and the function itself
(Sinan Kaya)
- add decoding for 16 GT/s link speed (Jay Fang)
- add interfaces to get max link speed and width (Tal Gilboa)
- add pcie_bandwidth_capable() to compute max supported link bandwidth
(Tal Gilboa)
- add pcie_bandwidth_available() to compute bandwidth available to
device (Tal Gilboa)
- add pcie_print_link_status() to log link speed and whether it's
limited (Tal Gilboa)
- use PCI core interfaces to report when device performance may be
limited by its slot instead of doing it in each driver (Tal Gilboa)
- fix possible cpqphp NULL pointer dereference (Shawn Lin)
- rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
hotplug (Mika Westerberg)
- add support for PCI I/O port space that's neither directly accessible
via CPU in/out instructions nor directly mapped into CPU physical
memory space. This is fairly intrusive and includes minor changes to
interfaces used for I/O space on most platforms (Zhichang Yuan, John
Garry)
- add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
John Garry)
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)
- remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
(Shawn Lin)
- report quirk timings with dev_info (Bjorn Helgaas)
- report quirks that take longer than 10ms (Bjorn Helgaas)
- add and use Altera Vendor ID (Johannes Thumshirn)
- tidy Makefiles and comments (Bjorn Helgaas)
- don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
ia64, and mn10300 with x86 (Bjorn Helgaas)
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
Lawler)
- merge pcieport_if.h into portdrv.h (Bjorn Helgaas)
- move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
Helgaas)
- completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)
- remove portdrv link order dependency (Bjorn Helgaas)
- remove support for unused VC portdrv service (Bjorn Helgaas)
- simplify portdrv feature permission checking (Bjorn Helgaas)
- remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
Helgaas)
- remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)
- use cached AER capability offset (Frederick Lawler)
- don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)
- rename pcie-dpc.c to dpc.c (Bjorn Helgaas)
- use generic pci_mmap_resource_range() instead of powerpc and xtensa
arch-specific versions (David Woodhouse)
- support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)
- remove System and Video ROM reservations on sparc (Bjorn Helgaas)
- probe for device reset support during enumeration instead of runtime
(Bjorn Helgaas)
- add ACS quirk for Ampere (née APM) root ports (Feng Kan)
- add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
Vincent-Cross)
- protect device restore with device lock (Sinan Kaya)
- handle failure of FLR gracefully (Sinan Kaya)
- handle CRS (config retry status) after device resets (Sinan Kaya)
- skip various config reads for SR-IOV VFs as an optimization
(KarimAllah Ahmed)
- consolidate VPD code in vpd.c (Bjorn Helgaas)
- add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
- add DT support for R-Car r8a7743 (Biju Das)
- fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
bridge driver that causes a general protection fault (Dexuan Cui)
- fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
(Dexuan Cui)
- fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
(Dexuan Cui)
- make several structures static (Fengguang Wu)
- increase number of MSI IRQs supported by Synopsys DesignWare bridges
from 32 to 256 (Gustavo Pimentel)
- implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
API from DesignWare drivers (Gustavo Pimentel)
- add Tegra power management support (Manikanta Maddireddy)
- add Tegra loadable module support (Manikanta Maddireddy)
- handle 64-bit BARs correctly in endpoint support (Niklas Cassel)
- support optional regulator for HiSilicon STB (Shawn Guo)
- use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)
- support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)
* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
HISI LPC: Add ACPI support
ACPI / scan: Do not enumerate Indirect IO host children
ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
of: Add missing I/O range exception for indirect-IO devices
PCI: Apply the new generic I/O management on PCI IO hosts
PCI: Add fwnode handler as input param of pci_register_io_range()
PCI: Remove __weak tag from pci_register_io_range()
MAINTAINERS: Add missing /drivers/pci/cadence directory entry
fm10k: Report PCIe link properties with pcie_print_link_status()
net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
net/mlx5: Report PCIe link properties with pcie_print_link_status()
net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
PCI: Add pcie_print_link_status() to log link speed and whether it's limited
PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
misc: pci_endpoint_test: Handle 64-bit BARs properly
PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
...
|
|
Patch series "mm, smaps: MMUPageSize for device-dax", v3.
Similar to commit 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to
vm_operations_struct") here is another occasion where we want
special-case hugetlbfs/hstate enabling to also apply to device-dax.
This prompts the question what other hstate conversions we might do
beyond ->split() and ->pagesize(), but this appears to be the last of
the usages of hstate_vma() in generic/non-hugetlbfs specific code paths.
This patch (of 3):
The current powerpc definition of vma_mmu_pagesize() open codes looking
up the page size via hstate. It is identical to the generic
vma_kernel_pagesize() implementation.
Now, vma_kernel_pagesize() is growing support for determining the page
size of Device-DAX vmas in addition to the existing Hugetlbfs page size
determination.
Ideally, if the powerpc vma_mmu_pagesize() used vma_kernel_pagesize() it
would automatically benefit from any new vma-type support that is added
to vma_kernel_pagesize(). However, the powerpc vma_mmu_pagesize() is
prevented from calling vma_kernel_pagesize() due to a circular header
dependency that requires vma_mmu_pagesize() to be defined before
including <linux/hugetlb.h>.
Break this circular dependency by defining the default vma_mmu_pagesize()
as a __weak symbol to be overridden by the powerpc version.
Link: http://lkml.kernel.org/r/151996254179.27922.2213728278535578744.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CPU_FTR_POWER9_DD2_1 flag is intended to be set for DD2.1 and
above (which is what the dt_cpu_ftrs setup does). Fix cputable for
DD2.2 to match.
This came about due to patches b5af4f279323 ("powerpc: Add CPU feature
bits for TM bug workarounds on POWER9 v2.2"), and 9e9626ed3a4a
("powerpc/64s: Fix POWER9 DD2.2 and above in DT CPU features") being
in-flight at once. The latter patch fixed dt_cpu_ftrs like this one
does. The former changed cputable to match dt_cpu_ftrs.
Fixes: b5af4f279323 ("powerpc: Add CPU feature bits for TM bug workarounds on POWER9 v2.2")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
Paul Mackerras
Nicholas Piggin
Aneesh Kumar K.V
Bryant G. Ly
Frederic Weisbecker
Al Viro
Michael Ellerman
Ram Pai
Naveen N. Rao
Christophe Leroy
Christoph Hellwig
Hari Bathini
Thomas Gleixner
Eric W. Biederman
Alistair Popple
Arnd Bergmann
Deepa Dinamani
Linus Torvalds
AKASHI Takahiro
Dan Williams