aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/eeh_event.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-22powerpc/eeh: Add eeh_force_recover to debugfsOliver O'Halloran1-10/+15
This patch adds a debugfs interface to force scheduling a recovery event. This can be used to recover a specific PE or schedule a "special" recovery even that checks for errors at the PHB level. To force a recovery of a normal PE, use: echo '<#pe>:<#phb>' > /sys/kernel/debug/powerpc/eeh_force_recover To force a scan for broken PHBs: echo 'hwcheck' > /sys/kernel/debug/powerpc/eeh_force_recover Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-22powerpc/eeh: Allow disabling recoveryOliver O'Halloran1-0/+9
Currently when we detect an error we automatically invoke the EEH recovery handler. This can be annoying when debugging EEH problems, or when working on EEH itself so this patch adds a debugfs knob that will prevent a recovery event from being queued up when an issue is detected. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc: eeh_event: convert semaphore to completionArnd Bergmann1-6/+3
For this use case, completions and semaphores are equivalent, but semaphores are an awkward interface that should generally be avoided, so use the completion instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-27powerpc/eeh: Manage EEH_PE_RECOVERING inside eeh_handle_normal_event()Sam Bobroff1-2/+0
Currently the EEH_PE_RECOVERING flag for a PE is managed by both the caller and callee of eeh_handle_normal_event() (among other places not considered here). This is complicated by the fact that the PE may or may not have been invalidated by the call. So move the callee's handling into eeh_handle_normal_event(), which clarifies it and allows the return type to be changed to void (because it no longer needs to indicate at the PE has been invalidated). This should not change behaviour except in eeh_event_handler() where it was previously possible to cause eeh_pe_state_clear() to be called on an invalid PE, which is now avoided. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-27powerpc/eeh: Remove eeh_handle_event()Sam Bobroff1-2/+2
The function eeh_handle_event(pe) does nothing other than switching between calling eeh_handle_normal_event(pe) and eeh_handle_special_event(). However it is only called in two places, one where pe can't be NULL and the other where it must be NULL (see eeh_event_handler()) so it does nothing but obscure the flow of control. So, remove it. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22powerpc/pci: Always print PHB and PE numbers as hexadecimalRussell Currey1-2/+2
PHB, PE (and by association MVE) numbers are printed as a mix of decimal and hexadecimal throughout the kernel. This can be misleading, so make them all hexadecimal. Standardising on hex instead of dec because: - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc) - PE numbers are presented as hex in sysfs and parsed in hex in debugfs The only place I think this could cause confusing are the messages during boot, i.e. pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0 which can be a quick way to check PE numbers. pe_level_printk() will only print two characters instead of three, so the above would be pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0 which gives a hint it's in hex. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-12powerpc: sparse: static-ify some thingsDaniel Axtens1-1/+1
As sparse suggests, these should be made static. Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-06-11powerpc/powernv: Fix killed EEH eventGavin Shan1-6/+15
On PowerNV platform, EEH errors are reported by IO accessors or poller driven by interrupt. After the PE is isolated, we won't produce EEH event for the PE. The current implementation has possibility of EEH event lost in this way: The interrupt handler queues one "special" event, which drives the poller. EEH thread doesn't pick the special event yet. IO accessors kicks in, the frozen PE is marked as "isolated" and EEH event is queued to the list. EEH thread runs because of special event and purge all existing EEH events. However, we never produce an other EEH event for the frozen PE. Eventually, the PE is marked as "isolated" and we don't have EEH event to recover it. The patch fixes the issue to keep EEH events for PEs that have been marked as "isolated" with the help of additional "force" help to eeh_remove_event(). Reported-by: Rolf Brudeseth <rolfb@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21powerpc/eeh: More accurate logGavin Shan1-2/+7
This clarifies in the log whether the error is a global PHB error or an individual PE being frozen. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-25powerpc/eeh: Use interruptible sleep in keehdGavin Shan1-1/+2
To replace down() with down_interrutible() to avoid following warning: [c00000007ba7b710] [c000000000014410] .__switch_to+0x1b0/0x380 [c00000007ba7b7c0] [c0000000007b408c] .__schedule+0x3ec/0x970 [c00000007ba7ba50] [c0000000007b1f24] .schedule_timeout+0x1a4/0x2b0 [c00000007ba7bb30] [c0000000007b34a4] .__down+0xa4/0x104 [c00000007ba7bbf0] [c0000000000b9230] .down+0x60/0x70 [c00000007ba7bc80] [c0000000000336d0] .eeh_event_handler+0x70/0x190 [c00000007ba7bd30] [c0000000000b1a58] .kthread+0xe8/0xf0 [c00000007ba7be30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x8 This also avoids keeping the load average up while doing nothing. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20powerpc/eeh: Allow to purge EEH eventsGavin Shan1-0/+37
On PowerNV platform, we might run into the situation where subsequent events are duplicated events of former one, which is being processed. For the case, we need the function implemented by the patch to purge EEH events accordingly. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20powerpc/eeh: Single kthread to handle eventsGavin Shan1-47/+49
We possiblly have multiple kthreads running for multiple EEH errors (events) and use one spinlock to make the process of handling those EEH events serialized. That's unnecessary and the patch creates only one kthread, which is started during EEH core initialization time in eeh_init(). A new semaphore introduced to count the number of existing EEH events in the queue and the kthread waiting on the semaphore. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20powerpc/eeh: Move common part to kernel directoryGavin Shan1-0/+142
The patch moves the common part of EEH core into arch/powerpc/kernel directory so that we needn't PPC_PSERIES while compiling POWERNV platform: * Move the EEH common part into arch/powerpc/kernel * Move the functions for PCI hotplug from pSeries platform to arch/powerpc/kernel/pci-hotplug.c * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to arch/powerpc/platforms/Kconfig * Adjust makefile accordingly Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.