aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/83xx/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-14powerpc/mpc83xx: Support for MPC8308 P1M boardIlya Yanok1-2/+2
This patch adds support for MPC8308 P1M board. Supported devices: DUART Dual Ethernet NOR flash Both I2C controllers USB in peripheral mode PCI Express Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/mpc8308rdb: support for MPC8308RDB board from FreescaleIlya Yanok1-0/+8
This patch adds support for MPC8308RDB development board from Freescale. Supported devices: DUART Dual Ethernet NOR and NAND flashes I2C USB in peripheral mode PCIE support is broken by the commit 3da34aa ("powerpc/fsl: Support unique MSI addresses per PCIe Root Complex"). Works after revert. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-20powerpc/83xx: Add support for MPC8377E-WLAN boardsAnton Vorontsov1-2/+2
MPC8377E-WLAN are basically RDB boards except: - RAM extended to 512 MB; - NAND flash removed, NOR flash extended to 64 MB; - Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; - Power management MCU removed; - PCI slot removed, another mini-PCI slot added (IRQ routing changed); - USB3300 PHY's ID pin grounded, thus USB port is host-only. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-1583xx: add support for the kmeter1 board.Heiko Schocher1-0/+7
The following series implements basic board support for the kmeter1 board from keymile, based on a MPC8360. This series provides the following functionality: - The board can boot with a serial console on UART1 - Ethernet: UCC1 in RGMII mode UCC2 in RGMII mode UCC4 in RMII mode UCC5 in RMII mode UCC6 in RMII mode UCC7 in RMII mode UCC8 in RMII mode following patch is necessary for working UCC in RMII mode: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html - Flash accessed via MTD layer On this hardware there is an Intel P30 flash, following patch series is necessary for working with this hardware: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html - I2C using I2C Bus 1 from the MPC8360 cpu Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11powerpc/kconfig: Kill PPC_MULTIPLATFORMBenjamin Herrenschmidt1-1/+1
CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-13powerpc: make Freescale QE support a selectable Kconfig optionTimur Tabi1-5/+0
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable option, thereby allowing users to compile kernels without any QE support. The drawback is that QE support is now disabled by default on platforms that have a QE, and so a defconfig is needed to enable QE and QE devices (like UCC GETH). Fortunately, all the current relevant defconfigs do that already. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Move mpc83xx_add_bridge to fsl_pci.cJohn Rigby1-1/+1
This allows other platforms with the same pci block like MPC5121 to use it. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: pci config cleanupJohn Rigby1-0/+1
Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: John Rigby <jrigby@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc: Add 82xx/83xx/86xx to 6xx MultiplatformKumar Gala1-4/+6
There isn't any reason at this point that we can't build 82xx, 83xx & 86xx support in with the other 6xx based boards. Twiddle the Kconfigs to allow this. This allows us to remove the machine type selection for related to 6xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/83xx: new board support: MPC8360E-RDKAnton Vorontsov1-0/+11
This is patch adds board file, device tree, and defconfig for the new board, made by Freescale Semiconductor Inc. and Logic Product Development. Currently supported: 1. UEC{1,2,7,4}; 2. I2C; 3. SPI; 4. NS16550 serial; 5. PCI and miniPCI; 6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85; 7. Graphics controller, Fujitsu MB86277. Not supported in this patch: 1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver); 2. FHCI USB (supported with FHCI driver). 3. QE Serial UCCs (tested to not work with ucc_uart driver, reason unknown, yet); 4. ADC AD7843 (tested to work, but support via device tree depends on major SPI rework, GPIO API, etc); Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02[POWERPC] 83xx: Add support for Analogue & Micro ASP837E boardBryan O'Donoghue1-0/+9
The following adds support for the Analogue & Micro ASP 8347E, running Redboot. http://www.analogue-micro.com/ASP8347.html Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: rework platform KconfigKumar Gala1-23/+20
* Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add MPC837x RDB platform supportKim Phillips1-1/+7
primarily based on mpc837x mds code. Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add base platform support for the mpc8315 rdb boardKim Phillips1-1/+1
mpc8315 identical to mpc8313 here, just check compatible. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platformKim Phillips1-3/+3
prepare for adding support for the mpc8315 rdb, since they are identical wrt platform code. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add support for Wind River SBC834x boardsPaul Gortmaker1-1/+8
This adds the basic support for the Wind River SBC834x boards. The SBC8349 is more common, although it should work on the SBC8347 board as well. Support is heavily based on the existing MPC834x_MDS code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11[POWERPC] 83xx: Add platform support for MPC837x MDS boardLi Yang1-0/+11
The MPC837x MDS is a new member of Freescale MDS reference system. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29[POWERPC] move 82xx/83xx/86xx Kconfig options to platform selectionArnd Bergmann1-1/+1
The cores used in the MPC82xx/83xx/86xx embedded controllers are very similar to those in the 32 bit general-purpose processors, so it makes sense to treat them as the same CPU family. Choosing between the embedded platforms and the multiplatform code is now done in the platform menu, but functionally everything stays the same. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2007-04-12[POWERPC] Convert 83xx platform to unified platform KconfigKumar Gala1-5/+1
Moved 83xx platform Kconfig over to being sourced by the unified arch/powerpc/platforms/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29[POWERPC] 83xx: Add MPC832x RDB board support.Michael Barkowski1-1/+8
Add support for the MPC8323E Reference Development Board (RDB). The board is a mini-ITX reference board with 64M DDR2, 16M flash, USB, PCI, 10/100 ethernet, serial, and phone ports. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDSKumar Gala1-4/+4
The MPC836x PB board is really just one part of the MPC836x MDS. We currently name all other PB boards as MDS. Removed all references to PB and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc836x_mds*). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-09[POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDSKumar Gala1-6/+6
The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-07[POWERPC] 83xx: Add base support for the MPC8313E RDBKim Phillips1-0/+12
Add support for the MPC8313E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, and serial. Signed-off-by: Wilson Lo <Wilson.Lo@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-11-30Fix misc Kconfig typosMatt LaPlante1-2/+2
Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-16[POWERPC] Fix MPC8360EMDS PB board supportLi Yang1-0/+13
MPC8360EMDS PB support is broken as some code was missing in last submission. This patch adds missing code and makes MPC8360EMDS PB support working. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04[POWERPC] Add support for the mpc832x mds boardKim Phillips1-0/+13
Add support for MPC832x MDS evaluation board. This patch depends on the 8360+QE lib patches by Leo. The MPC832x processors (MPC8323E, MPC8323, MPC8321E, MPC8321) sport the e300c2 core plus a QUICC Engine (QE). This patch adds support for the 832x MDS evaluation board. The 832x MDS dts and defconfig files are pending more tests. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03powerpc: Add base support for the Freescale MPC8349E-mITX eval boardKim Phillips1-1/+10
Added support for the Freescale MPC8343e-mITX board. Currently based on the 8343 SYS code. The 2nd PHY (5-port switch) and SATA are untested (work in progress). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-01-14[PATCH] powerpc: Add MPC834x SYS board to arch/powerpcKumar Gala1-0/+1
Add the first MPC83xx board that uses a flat device tree to arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx supportKumar Gala1-0/+26
Updated Kconfig & Makefiles in prep for adding support for the Freescale MPC83xx family of processors to arch/powerpc. Moved around some config options that are more globally applicable to other PowerPC processors. Added a temporary config option (83xx) to match existing arch/ppc support for the MPC83xx line. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.