aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-12-11[POWERPC] EEH: Avoid a possible NULL pointer dereferenceStephen Rothwell1-2/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Merge vpdinfo.c into pci.cStephen Rothwell4-259/+219
There was only one global function in vpdinfo.c and it was only called from pci.c, so merge them and make the function static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Clean up and simplify vdpinfo.cStephen Rothwell1-54/+46
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: DeCamelCase vpdinfo.cStephen Rothwell3-97/+95
This is a purely mechanical transformation. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Use SLB size from the device treeMichael Neuling1-1/+2
Currently we hardwire the number of SLBs to 64, but PAPR says we should use the ibm,slb-size property to obtain the number of SLB entries. This uses this property instead of assuming 64. If no property is found, we assume 64 entries as before. This soft patches the SLB handler, so it shouldn't change performance at all. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell10-14/+14
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Don't special case pci_domain_nr() for iSeriesStephen Rothwell1-0/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] Remove some iSeries platform checks from the PCI codeStephen Rothwell1-0/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Call iSeries_pcibios_init from setup_archStephen Rothwell2-1/+5
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Make pcibios_final_fixup not depend on pci_dnStephen Rothwell1-15/+12
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Reduce dependence on pci_dn bussubnoStephen Rothwell1-9/+9
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: iseries_ds_addr is only used in pci.cStephen Rothwell2-12/+12
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove pci_dn dependency from iSeries_Device_InformationStephen Rothwell3-17/+6
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove one layer of IO routinesStephen Rothwell1-49/+19
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Consoldiate PCI IO error checkStephen Rothwell1-79/+26
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Unindent and clean iSeries_pci_final_fixupStephen Rothwell1-33/+35
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Remove some dead code from pci.cStephen Rothwell1-18/+1
and an unnecessary cast. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: DeCamelCase pci.cStephen Rothwell1-108/+108
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Cleanup PCI retry code a littleStephen Rothwell1-4/+4
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iSeries: Move find_Device_Node to avoid a forward declarationStephen Rothwell1-23/+16
Also remove another unnecessary forward declaration. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] pSeries: Remove dependency on pci_dn bussubnoStephen Rothwell1-17/+7
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] iommu_free_table doesn't need the device_nodeStephen Rothwell1-1/+1
It only needs the iommu_table address. It also makes use of the node name to print error messages. So just pass it the things it needs. This reduces the places that know about the pci_dn by one. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] celleb: Add support for native CBEIshizaki Kou4-23/+85
This adds support for native CBE on Celleb, that is, without the BEAT hypervisor. Many codes in platforms/cell/ are used in native CBE environment. Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11[POWERPC] cell: Fix undefined reference to mmio_nvram_initIshizaki Kou1-0/+2
This fixes the following link error with CONFIG_PPC_CELL_NATIVE=y and CONFIG_PPC_CELL_BLADE=n: arch/powerpc/platforms/built-in.o: In function `.cell_setup_arch': setup.c:(.init.text+0xe80): undefined reference to `.mmio_nvram_init' Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] CELLEB: Fix possible NULL pointer dereferenceCyrill Gorcunov1-3/+8
This adds checking for NULL returned value from of_get_property to prevent possible NULL pointer dereference in the case when expected properties are not present. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06[POWERPC] Clean out asm/of_{platform, device}.hJon Loeliger4-5/+5
Convert #include of asm/of_{platform, device}.h into linux/of_{platform,device}.h for a few scattered platforms. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-05Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25Paul Mackerras6-43/+105
2007-12-03[POWERPC] pasemi: Fix module information for gpio-mdioOlof Johansson1-0/+5
Fix up the module information for gpio-mdio, it wouldn't load because of lacking license, and wouldn't auto-load because of missing MODULE_DEVICE_TABLE. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-03[POWERPC] Add missing spaces in printk formatsjoe@perches.com3-3/+3
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] iSeries: Fix sparse warnings in setup.cStephen Rothwell2-8/+9
arch/powerpc/platforms/iseries/setup.c:111:27: warning: constant 0x100000000 is so big it is long arch/powerpc/platforms/iseries/setup.c:113:23: warning: constant 0x100000000 is so big it is long arch/powerpc/platforms/iseries/setup.c:117:27: warning: constant 0x000fffffffffffff is so big it is long arch/powerpc/platforms/iseries/setup.c:127:28: warning: constant 0x100000000 is so big it is long arch/powerpc/platforms/iseries/setup.c:129:24: warning: constant 0x100000000 is so big it is long arch/powerpc/platforms/iseries/setup.c:233:5: warning: constant 0x000fffffffffffff is so big it is long arch/powerpc/platforms/iseries/setup.c:235:5: warning: constant 0x000fffffffffffff is so big it is long arch/powerpc/platforms/iseries/setup.c:319:6: warning: symbol 'mschunks_alloc' was not declared. Should it be static? arch/powerpc/platforms/iseries/setup.c:661:6: warning: symbol 'iSeries_early_setup' was not declared. Should it be static? Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] iSeries: Declare iSeries_pci_final_fixup in pci.hStephen Rothwell2-5/+6
Fixes sparse warning: arch/powerpc/platforms/iseries/pci.c:169:13: warning: symbol 'iSeries_pci_final_fixup' was not declared. Should it be static? Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] iSeries: Mark two functions __initStephen Rothwell1-2/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] EEH: Report errors as soon as possibleLinas Vepstas1-7/+8
Do not wait for the pci slot status before reporting an error to the device driver. Some systems may take many seconds to report the slot status, and this can confuse unsuspecting device drivers. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] EEH: Be careful when identifying "empty" slots.Linas Vepstas1-1/+1
If an "empty" slot is failing, make sure its a permanent failure; else process the error normally. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] EEH: Work with device endpoint, alwaysLinas Vepstas1-0/+1
Perform all error checking at the "partitonable endpoint" of the device. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] powermac: Fix warning in time.cJohannes Berg1-0/+2
arch/powerpc/platforms/powermac/time.c:88: warning: 'to_rtc_time' defined but not used This fixes the warning by making the relevant code depend on the users. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] Remove prod_processor()Nathan Lynch1-5/+0
prod_processor() is unused, and that's a good thing, since it does not supply the required proc id parameter to H_PROD. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03[POWERPC] Cleanup SMT thread handlingBenjamin Herrenschmidt2-2/+4
This cleans up the SMT thread handling, removing some hard coded assumptions and providing a set of helpers to convert between linux cpu numbers, thread numbers and cores. This implementation requires the number of threads per core to be a power of 2 and identical on all cores in the system, but it's an implementation detail, not an API requirement and so this limitation can be lifted in the future if anybody ever needs it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03Revert "[POWERPC] Fix RTAS os-term usage on kernel panic"Paul Mackerras1-2/+1
This reverts commit a2b51812a4dc5db09ab4d4638d4d8ed456e2457e. It turns out that this change caused some machines to fail to come back up when being rebooted, and generated an error in the hypervisor error log on some machines. The platform architecture (PAPR) is a little unclear on exactly when the RTAS ibm,os-term function should be called. Until that is clarified I'm reverting this commit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-01[POWERPC] pasemi: Move cpus to hold loop before restartOlof Johansson1-0/+7
Use smp_send_stop() to move all cpus besides the one executing reboot into a hold loop, to keep them from being in powersavings mode at the time of reboot. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-12-01[POWERPC] pasemi: Don't enter powersaving states from elevated astatesOlof Johansson3-1/+22
When the PWRficient cpus are entered into powersavings states, the astate is automatically dropped down to 0. While we still restore it when we come out of idle, it can still cause some weird effects with respect to performance (especially since it takes a while to ramp up to higher astates). So, to avoid this, don't enter power savings when the cpufreq driver (or user) has set higher astates than 0. The restore is still required, since there's a chance the astate has been raised from the other cpu while the idling one was asleep. Signed-off-by: Olof Johansson <olof@lixom.net>
2007-11-29[POWERPC] pasemi: Broaden specific references to 1682MOlof Johansson4-7/+22
There will be more product numbers in the future than just PA6T-1682M, but they will share much of the features. Remove some of the explicit references and compatibility checks with 1682M, and replace most of them with the more generic term "PWRficient". Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Buesch <mb@bu3sch.de> Acked-by: Doug Thompson <dougthompson@xmission.com>
2007-11-29[POWERPC] pasemi: clean up mdio_gpio a bitOlof Johansson1-37/+51
Misc cleanups of mdio_gpio: * Better error handling/unrolling in case of init/alloc failures * Go through child nodes and get their interrupts instead of using hardcoded values * Remap the GPIO registers at module load/driver init instead of during probe * Coding style and other misc cleanups Signed-off-by: Olof Johansson <olof@lixom.net>
2007-11-20[POWERPC] 83xx: MPC832x RDB - remove spidev stub, use mmc_spiAnton Vorontsov1-5/+9
mmc_spi has hit the mainline, so we can start using it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20[POWERPC] 8xxx: MDS board RTC fixesKim Phillips3-72/+0
Now the rtc class ds1374 driver has been added, remove the old rtc driver hookup code, add rtc node to device trees, and turn on the new driver in the defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-20Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into mergePaul Mackerras3-10/+36
2007-11-20[POWERPC] spufs: Fix context destroy vs /spu readdir raceJeremy Kerr1-0/+1
We can currently cause an oops by repeatedly creating and destroying contexts, while doing getdents() calls on the "/spu" directory. This is due to the context's top-level dentry remaining hashed while the context is being destroyed. Fix this by unhashing the context's dentry with the dentry->d_inode->i_mutex held. This way, we'll hit the check for d_unhashed in dentry_readdir, and won't be included in the list of subdirs for /spu. test: spufs-testsuite:tests/01-spu_create/07-destroy-vs-readdir-race Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-20[POWERPC] Fix RTAS os-term usage on kernel panicLinas Vepstas1-1/+2
The rtas_os_term() routine was being called at the wrong time. The actual rtas call "os-term" will not ever return, and so calling it from the panic notifier is too early. Instead, call it from the machine_reset() call. This splits the rtas_os_term() routine into two: one part to capture the kernel panic message, invoked during the panic notifier, and another part that is invoked during machine_reset(). Prior to this patch, the os-term call was never being made, because panic_timeout was always non-zero. Calling os-term helps keep the hypervisor happy! We have to keep the hypervisor happy to avoid service, dump and error reporting problems. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19[POWERPC] 83xx: Handle mpc8360 rev. 2.1 RGMII timing erratumKim Phillips1-3/+28
If on a rev. 2.1, adjust UCC clock and data timing characteristics as specified in the rev.2.1 erratum #2. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-19[POWERPC] 83xx: mpc832x mds: Fix board PHY reset codeKim Phillips1-3/+4
currently the board-level PHY reset code for the mpc832x MDS messes with reset configuration words source settings which is plain wrong (it looks like this board code was cut-n-pasted from the mpc8360 mds code, which has the PHY reset bits in a different BCSR); this patch points the PHY reset code to the proper mpc832x mds PHY reset bits in the BCSR. Signed-off-by: Peter Van Ackeren <peter.vanackeren@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.