aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-07-29Remove fs.h from mm.hAlexey Dobriyan3-0/+3
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATIONRafael J. Wysocki4-6/+6
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26Merge branch 'fixes-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into mergePaul Mackerras11-11/+48
2007-07-26[POWERPC] spusched: Fix initial timeslice calculationChristoph Hellwig2-1/+6
Currently we calculate the first timeslice for every context incorrectly - alloc_spu_context calls spu_set_timeslice before we set ctx->prio so we always calculate the longest possible timeslice for the lowest possible priority. This patch makes sure to update the schedule-related fields before calculating the timeslice and also makes sure we update the timeslice for a non-running context when entering spu_run so a priority change affects the context as soon as possible. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spusMasato Noguchi1-4/+0
We currently initialize cbe_spu_info[].spus in both init_spu_base and spu_sched_init. The initialise in spu_sched_init clears the SPU list, so we end up with no physical SPUs. Because of this, the spu_run syscall will block forever. This change removes the unnecessary initialization in spu_sched_init. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix Maple platform ISA busBenjamin Herrenschmidt1-0/+3
The Maple platform has ISA IOs but didn't call the new functions to actually map those, thus crashing when trying to access the nvram. This fixes Maple and JS2x using SLOF. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Make pci_iounmap actually unmap thingsBenjamin Herrenschmidt1-1/+7
This patch uses the newly added functions for testing if an address is an ISA or PCI IO port to properly unmap things in pci_iounmap that aren't such ports. Without that, drivers using the iomap API will never actually unmap resources, which on IBM server machines will prevent hot-unplug of the corresponding HW adapters. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Add function to check if address is an IO portBenjamin Herrenschmidt1-0/+23
This adds a function that tells you if a given kernel virtual address is hitting a PCI or ISA IO port permanent mapping or not. This is to be used in the next patch to fix iomap APIs to properly unmap things. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix Pegasos keyboard detectionAlan Curry1-0/+4
As of 2.6.22 the kernel doesn't recognize the i8042 keyboard/mouse controller on the PegasosPPC. This is because of a feature/bug in the OF device tree: the "device_type" attribute is an empty string instead of "8042" as the kernel expects. This adds a secondary detection which looks for a device whose *name* is "8042" if there is no device whose *type* is "8042". Signed-off-by: Alan Curry <pacman@world.std.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] iSeries: Fix section mismatch warning in lpeventsStephen Rothwell1-1/+1
WARNING: vmlinux.o(.text+0x4f568): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.setup_hvlpevent_queue' and '.process_hvlpevents') setup_hvlpevent_queue is only called from __init code so make it __init as well. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] iSeries: Fix section mismatch warningsStephen Rothwell1-3/+4
WARNING: vmlinux.o(.text+0x8124): Section mismatch: reference to .init.text:.iSeries_early_setup (between '.__start_initialization_iSeries' and '.__mmu_off') WARNING: vmlinux.o(.text+0x8128): Section mismatch: reference to .init.text:.early_setup (between '.__start_initialization_iSeries' and '.__mmu_off') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix RTC and device tree on linkstation machinesGuennadi Liakhovetski2-13/+24
This fixes the RTC on linkstation ppc machines again, and updates the device tree: add rtc nodes on i2c, remove bogus 0-size cache-line declarations, rename interrupt-controller nodes, remove erroneous interrupt-parent line, accidentally introduced by a recent patch. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Add of_register_i2c_devices()Guennadi Liakhovetski1-0/+61
Scan the device tree for i2c devices, check their "compatible" property against a hard-coded table, and, if found, register with i2c boardinfo. This provides the infrastructure needed to find i2c devices in the device tree and register them with the i2c subsystem. This and the following commit let the linkstation work with the new i2c API and thus fix a regression. Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix loop with unsigned long counter variableManish Ahuja1-2/+2
This fixes a possible infinite loop when the unsigned long counter "i" is used in lmb_add_region() in the following for loop: for (i = rgn->cnt-1; i >= 0; i--) by making the loop counter "i" be signed. Signed-off-by: Manish Ahuja <ahuja@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix register labels on show_regs() message for 4xx/Book-EKumar Gala1-0/+4
In a show_regs() message The DEAR and ESR were reported as DAR and DSISR which only exist on classic parts. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORMKumar Gala1-1/+1
BootX text code is only supported on systems with real OF at this point which is PPC_OF && PPC_MULTIPLATFORM. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boardsRoy Zang2-0/+12
Add global-utilities node with has-rstcr on MPC8544 DS and MPC8568 MDS boards so they are able to reset properly. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Fix mpc7448hpc2 tsi108 device_type bugRoy Zang1-1/+1
Fix mpc7448hpc2 tsi108 device_type bug. Wrong device type will break the board startup. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWREPC] Fixup a number of modpost warnings on ppc32Kumar Gala5-8/+8
Fixed the following warnings: WARNING: vmlinux.o(.text+0x2934): Section mismatch: reference to .init.text:__alloc_bootmem (between 'irq_alloc_host' and 'irq_set_default_host') WARNING: vmlinux.o(.text+0xb2aa): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf') WARNING: vmlinux.o(.text+0xb2b2): Section mismatch: reference to .init.data:boot_command_line (between 'register_early_udbg_console' and 'udbg_printf') WARNING: vmlinux.o(.text+0xe354): Section mismatch: reference to .init.text:__alloc_bootmem (between 'pcibios_alloc_controller' and 'pci_domain_nr') WARNING: vmlinux.o(.text+0x12768): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config') WARNING: vmlinux.o(.text+0x127a8): Section mismatch: reference to .init.text:update_bridge_resource (between 'quirk_fsl_pcie_transparent' and 'indirect_read_config') WARNING: vmlinux.o(.text+0x17566c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bus_parented') Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26[POWERPC] Fix ethernet PHY support on MPC8544 DSKumar Gala1-0/+2
The MPC8544 dts needed to set the new phy-connection-type to rgmii-id for the Vitesse PHY on the board to work properly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-25[POWERPC] Don't try to allocate resources for a Freescale POWERPC PHBKumar Gala1-0/+18
The Freescale PCI PHBs actual report back values in the BAR registers this causes issues in that we try to allocate resources for them and will get error messages like the following on MPC8544 DS: PCI: Failed to allocate mem resource #1:80000000@0 for 0000:00:00.0 To address this if we are class PCI_CLASS_PROCESSOR_POWERPC, a normal header type, and the PHB we clear out all the resources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"Paul Mackerras1-1/+1
This reverts commit fd6e9d3945ee122eb513ada8b17296d243c1ce5e. Having #size-cells == 0 in a node indicates that things under the node aren't directly accessible, and therefore we shouldn't try to translate addresses for devices under the node into CPU physical addresses. Some drivers, such as the nvram driver for powermacs, rely on of_address_to_resource failing if they are called for a node representing a device whose resources aren't directly accessible by the CPU. These drivers were broken by commit fd6e9d39, resulting in the "Lombard" powerbook hanging early in the boot process. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-25[POWERPC] Fix PCI indirect for big-endian cfg_addrKumar Gala2-1/+2
We didn't actually propogate the flag we pass into setup_indirect_pci() to set indirect_type and thus were getting the wrong endianness if PPC_INDIRECT_TYPE_BIG_ENDIAN was set. Also, we need to or in additional flags rather than just doing a direct assignment. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpcLinus Torvalds43-837/+1630
* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits) [POWERPC] 85xx: Added needed MPC85xx PCI device IDs [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs [POWERPC] 85xxCDS: MPC8548 DTS cleanup. [POWERPC] 85xxCDS: Misc 8548 PCI Corrections. [POWERPC] 85xxCDS: Delay 8259 cascade hookup. [POWERPC] 85xxCDS: Make sure restart resets the PCI bus. [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line. [POWERPC] FSL: Add support for PCI-X controllers [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB [POWERPC] Provide ability to setup P2P bridge registers from struct resource [POWERPC] Add basic PCI/PCI Express support for 8544DS board [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime [POWERPC] Removed setup_indirect_pci_nomap [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS [POWERPC] 85xx: Added 8568 PCIe support [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected [POWERPC] Add basic PCI node for mpc8568mds board [POWERPC] Use Freescale pci/pcie common code for 85xx boards [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node ...
2007-07-24spusched: fix mismerge in spufs.hChristoph Hellwig1-4/+1
spufs.h now has two enums for the sched_flags leading to identical values for SPU_SCHED_WAS_ACTIVE and SPU_SCHED_NOTIFY_ACTIVE. Merge them into a single enum as they were in the IBM development tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24[POWERPC] 85xx: Added needed MPC85xx PCI device IDsKumar Gala1-13/+13
Added the MPC85xx PCI device IDs that we need for the quirks we have. Also, fixed the MPC8567E, MPC8567 device IDs which had the wrong value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDsJon Loeliger1-2/+2
Also add 8641/8641D device IDs as well. All of which already exist or have been submitted to The Linux PCI ID Repository at: http://pci-ids.ucw.cz/ CC-to: pci-ids@ucw.cz Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xxCDS: MPC8548 DTS cleanup.Randy Vinson1-35/+89
Added the P2P bridge present on the Arcadia base board and moved the VIA Southbridge behind the bridge to reflect its actual position in the bus organization. Added the RTC that's in the VIA Southbridge and expanded the ranges array for the SOC node to allow proper address translation of the RTC registers. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xxCDS: Misc 8548 PCI Corrections.Randy Vinson1-4/+4
Setting the host bridge @8000 as primary. Also fixing a bug in setting the USB interrupt numbers. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-24[POWERPC] 85xxCDS: Delay 8259 cascade hookup.Randy Vinson1-11/+25
The interrupts of an E100 card inserted in PCI slot 4 may be on at bootup. The resulting interrupt flood interacts with the 8259 cascade handler and prevents proper boot up. There is a quirk for the E100 that will disable the E100's interrupts but to use it, the 8259 cascade hookup must be delayed until after the quirk has run. This patch delays the 8259 cascade hookup by registering a device_initcall() which runs after the PCI quirk for the E100. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Make sure restart resets the PCI bus.Randy Vinson1-0/+35
The current 85xxCDS restart code fails to reset the PCI bus which can lead to odd behavior after the restart. This patch uses the VIA Super Southbridge to perform a PCI reset which will reset the entire system. NOTE: Since the VIA chip is behind a PCI-to-PCI bridge which can be disabled with a switch setting, it may not be possible to perform the PCI bus reset. In this case, the code defaults to the previous restart mechanism. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.Randy Vinson2-6/+32
The Freescale MPC8555CDS and MPC8548CDS reference hardware has a legacy 8259 interrupt controller pair contained within a VIA VT82C686B Southbridge on the main carrier board. The processor complex plugs into the carrier card using a PCI slot which limits the available interrupts to the INTA-INTD PCI interrupts. The output of the 8259 cascade pair is routed through a gate array and connected to the PCI INTA interrupt line. The normal interrupt chaining hook (set_irq_chained_handler) does not allow sharing of the chained interrupt which prevents the use of PCI INTA by PCI devices. This patch allows the 8259 cascade pair to share their interrupt line with PCI devices. NOTE: The addition of the .end routine for the MPIC is not strictly necessary for this patch. It's there so this code will run from within the threaded interrupt context used by the Real Time patch. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] FSL: Add support for PCI-X controllersKumar Gala1-1/+12
Some set of 85xx platforms have PCI-X controllers. The old arch/ppc code setup these controllers and we haven't moved it over to arch/powerpc. We use the PCI-X Capabilties to know if we are in PCI-X mode instead of the Global Utilities PORDEVSR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHBKumar Gala1-0/+14
For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P bridge registers properly. Make sure they get setup based on what the struct pci_controller got from the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Provide ability to setup P2P bridge registers from struct resourceKumar Gala1-6/+12
We need the ability to set P2P bridge registers to properly setup the virtual P2P bridges that exist in PCIe controllers for some of the embedded setups. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI/PCI Express support for 8544DS boardRoy Zang5-126/+662
Add basic support for the PCIe PHB and enable the ULI bridge. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Make endianess of cfg_addr for indirect pci ops runtimeKumar Gala11-30/+26
Make it so we do a runtime check to know if we need to write cfg_addr as big or little endian. This is needed if we want to allow 86xx support to co-exist in the same kernel as other 6xx PPCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Removed setup_indirect_pci_nomapKumar Gala1-13/+4
We don't use setup_indirect_pci_nomap in arch/powerpc and it appears the users that needed it from arch/ppc are now using setup_indirect_pci. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDSKumar Gala1-0/+10
The newer Arcadia boards for CDS have an FPGA that shows up on PCI however isn't a real PCI device. Add a quirk to just ignore the FPGA. This is based on the following patch from Andy & York: http://ozlabs.org/pipermail/linuxppc-dev/2007-February/032042.html Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] 85xx: Added 8568 PCIe supportKumar Gala4-114/+208
Added the PCIe device node to the 8568 dts and the needed quirk entries. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connectedKumar Gala4-1/+17
On the 85xx/86xx PCIe controllers if there is no device connected to the PHB we will still allocate a pci_bus for downstream bus of the virtual P2P bridge. However the resources allocated to the downstream bus are not correct and so we just mimic the resources from the upstream pci_bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add basic PCI node for mpc8568mds boardRoy Zang1-0/+29
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Use Freescale pci/pcie common code for 85xx boardsRoy Zang8-104/+25
Switch the 85xx platform over to using the FSL generic PCI code. This gets ups PCIe support in addition to base PCI support. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Update PCI nodes in the 83xx/85xx boards device treeRoy Zang11-15/+15
Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add 8548 CDS PCI express controller node and PCI-X device nodeRoy Zang1-51/+105
Add 8548 CDS PCI express controller node and PCI-X device node. The current dts file is suitable for 8548 Rev 2.0 board with Arcadia 3.1. This kind of board combination is the most popular. Used the following compatible properties: PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] FSL: Cleanup how we detect if we are a PCIe controllerKumar Gala1-9/+9
Use the PCI capabilities to determine if we are PCIe PHB. Also use PPC_INDIRECT_TYPE_NO_PCIE_LINK since the Freescale PCIe controllers will lock the system if they don't have link and you try to do a config access to anything but the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no linkKumar Gala1-1/+15
Added PPC_INDIRECT_TYPE_NO_PCIE_LINK flag to the indirect pci handling code to ensure that we don't talk to any device other than the PHB if we don't have PCIe link. Some controllers will lockup if they try to do a config cycle to any device on the bus except the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Add the ability to find PCI capabilities early onKumar Gala1-0/+7
Added early_find_capability that wraps pci_bus_find_capability and uses fake_pci_bus() to allow us to call it before we've fully setup the pci_controller. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xxZang Roy-r619115-226/+187
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and PCIe on 85xx/86xx. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23[POWERPC] Create common fsl pci/e files based on 86xx platformsRoy Zang6-5/+9
Move arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h as the base to unify 83xx/85xx/86xx pci and pcie. Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option. The code still works for 86xx platforms. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.