aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30powerpc/pseries/mobility: Set pr_fmt()Nathan Lynch1-2/+5
The pr_err() callsites in mobility.c already manually include a "mobility:" prefix, let's make it official for the benefit of messages to be added later. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190627053044.9238-2-nathanl@linux.ibm.com
2020-07-30powerpc/cacheinfo: Warn if cache object chain becomes unorderedNathan Lynch1-0/+9
This can catch cases where the device tree has gotten mishandled into an inconsistent state at runtime, e.g. the cache nodes for both the source and the destination are present after a migration. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190627051537.7298-5-nathanl@linux.ibm.com
2020-07-30powerpc/cacheinfo: Improve diagnostics about malformed cache listsNathan Lynch1-2/+8
If we have a bug which causes us to start with the wrong kind of OF node when linking up the cache tree, it's helpful for debugging to print information about what we found vs what we expected. So replace uses of WARN_ON_ONCE with WARN_ONCE, which lets us include an informative message instead of a contentless backtrace. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190627051537.7298-4-nathanl@linux.ibm.com
2020-07-30powerpc/cacheinfo: Use name@unit instead of full DT path in debug messagesNathan Lynch1-8/+8
We know that every OF node we deal with in this code is under /cpus, so we can make the debug messages a little less verbose without losing information. E.g. cacheinfo: creating L1 dcache and icache for /cpus/PowerPC,POWER8@0 cacheinfo: creating L2 ucache for /cpus/l2-cache@2006 cacheinfo: creating L3 ucache for /cpus/l3-cache@3106 becomes cacheinfo: creating L1 dcache and icache for PowerPC,POWER8@0 cacheinfo: creating L2 ucache for l2-cache@2006 cacheinfo: creating L3 ucache for l3-cache@3106 Replace all '%pOF' specifiers with '%pOFP'. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190627051537.7298-3-nathanl@linux.ibm.com
2020-07-30powerpc/cacheinfo: Set pr_fmt()Nathan Lynch1-0/+2
Set pr_fmt() so we get a nice prefix on messages. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190627051537.7298-2-nathanl@linux.ibm.com
2020-07-30powerpc: fix function annotations to avoid section mismatch warnings with gcc-10Vladis Dronov3-5/+5
Certain warnings are emitted for powerpc code when building with a gcc-10 toolset: WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in reference from the function remove_pmd_table() to the function .meminit.text:split_kernel_mapping() The function remove_pmd_table() references the function __meminit split_kernel_mapping(). This is often because remove_pmd_table lacks a __meminit annotation or the annotation of split_kernel_mapping is wrong. Add the appropriate __init and __meminit annotations to make modpost not complain. In all the cases there are just a single callsite from another __init or __meminit function: __meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table() __init prom_init() -> setup_secure_guest() __init xive_spapr_init() -> xive_spapr_disabled() Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
2020-07-29Merge branch 'locking/header'Peter Zijlstra1-2/+0
2020-07-29locking/atomic: Move ATOMIC_INIT into linux/types.hHerbert Xu1-2/+0
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h. This allows users of atomic_t to use ATOMIC_INIT without having to include atomic.h as that way may lead to header loops. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Waiman Long <longman@redhat.com> Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
2020-07-29powerpc/kexec_file: Enable early kernel OPAL callsHari Bathini2-0/+36
Kernels built with CONFIG_PPC_EARLY_DEBUG_OPAL enabled expects r8 & r9 to be filled with OPAL base & entry addresses respectively. Setting these registers allows the kernel to perform OPAL calls before the device tree is parsed. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602303975.575379.5032301944162937479.stgit@hbathini
2020-07-29powerpc/kexec_file: Fix kexec load failure with lack of memory holeHari Bathini1-19/+14
The kexec purgatory has to run in real mode. Only the first memory block maybe accessible in real mode. And, unlike the case with panic kernel, no memory is set aside for regular kexec load. Another thing to note is, the memory for crashkernel is reserved at an offset of 128MB. So, when crashkernel memory is reserved, the memory ranges to load kexec segments shrink further as the generic code only looks for memblock free memory ranges and in all likelihood only a tiny bit of memory from 0 to 128MB would be available to load kexec segments. With kdump being used by default in general, kexec file load is likely to fail almost always. This can be fixed by changing the memory hole lookup logic for regular kexec to use the same method as kdump. This would mean that most kexec segments will overlap with crashkernel memory region. That should still be ok as the pages, whose destination address isn't available while loading, are placed in an intermediate location till a flush to the actual destination address happens during kexec boot sequence. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602302326.575379.14038896654942043093.stgit@hbathini
2020-07-29powerpc/kexec_file: Add appropriate regions for memory reserve mapHari Bathini1-5/+53
While initrd, elfcorehdr and backup regions are already added to the reserve map, there are a few missing regions that need to be added to the memory reserve map. Add them here. And now that all the changes to load panic kernel are in place, claim likewise. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602300473.575379.4218568032039284448.stgit@hbathini
2020-07-29powerpc/kexec_file: Prepare elfcore header for crashing kernelHari Bathini4-0/+234
Prepare elf headers for the crashing kernel's core file using crash_prepare_elf64_headers() and pass on this info to kdump kernel by updating its command line with elfcorehdr parameter. Also, add elfcorehdr location to reserve map to avoid it from being stomped on while booting. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> [mpe: Ensure cmdline is nul terminated] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602298855.575379.15819225623219909517.stgit@hbathini
2020-07-29powerpc/kexec_file: Setup backup region for kdump kernelHari Bathini5-7/+159
Though kdump kernel boots from loaded address, the first 64KB of it is copied down to real 0. So, setup a backup region and let purgatory copy the first 64KB of crashed kernel into this backup region before booting into kdump kernel. Update reserve map with backup region and crashed kernel's memory to avoid kdump kernel from accidentially using that memory. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602294718.575379.16216507537038008623.stgit@hbathini
2020-07-29powerpc/kexec_file: Restrict memory usage of kdump kernelHari Bathini1-1/+385
Kdump kernel, used for capturing the kernel core image, is supposed to use only specific memory regions to avoid corrupting the image to be captured. The regions are crashkernel range - the memory reserved explicitly for kdump kernel, memory used for the tce-table, the OPAL region and RTAS region as applicable. Restrict kdump kernel memory to use only these regions by setting up usable-memory DT property. Also, tell the kdump kernel to run at the loaded address by setting the magic word at 0x5c. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602284284.575379.6962016255404325493.stgit@hbathini
2020-07-29powerpc/drmem: Make LMB walk a bit more flexibleHari Bathini4-44/+78
Currently, numa & prom are the only users of drmem LMB walk code. Loading kdump with kexec_file also needs to walk the drmem LMBs to setup the usable memory ranges for kdump kernel. But there are couple of issues in using the code as is. One, walk_drmem_lmb() code is built into the .init section currently, while kexec_file needs it later. Two, there is no scope to pass data to the callback function for processing and/or erroring out on certain conditions. Fix that by, moving drmem LMB walk code out of .init section, adding scope to pass data to the callback function and bailing out when an error is encountered in the callback function. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602282727.575379.3979857013827701828.stgit@hbathini
2020-07-29powerpc/kexec_file: Avoid stomping memory used by special regionsHari Bathini5-4/+539
crashkernel region could have an overlap with special memory regions like OPAL, RTAS, TCE table & such. These regions are referred to as excluded memory ranges. Setup these ranges during image probe in order to avoid them while finding the buffer for different kdump segments. Override arch_kexec_locate_mem_hole() to locate a memory hole taking these ranges into account. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602281047.575379.6636807148335160795.stgit@hbathini
2020-07-29powerpc/kexec_file: Add helper functions for getting memory rangesHari Bathini3-1/+247
In kexec case, the kernel to be loaded uses the same memory layout as the running kernel. So, passing on the DT of the running kernel would be good enough. But in case of kdump, different memory ranges are needed to manage loading the kdump kernel, booting into it and exporting the elfcore of the crashing kernel. The ranges are exclude memory ranges, usable memory ranges, reserved memory ranges and crash memory ranges. Exclude memory ranges specify the list of memory ranges to avoid while loading kdump segments. Usable memory ranges list the memory ranges that could be used for booting kdump kernel. Reserved memory ranges list the memory regions for the loading kernel's reserve map. Crash memory ranges list the memory ranges to be exported as the crashing kernel's elfcore. Add helper functions for setting up the above mentioned memory ranges. This helpers facilitate in understanding the subsequent changes better and make it easy to setup the different memory ranges listed above, as and when appropriate. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602279194.575379.8526552316948643550.stgit@hbathini
2020-07-29powerpc/kexec_file: Mark PPC64 specific codeHari Bathini7-23/+105
Some of the kexec_file_load code isn't PPC64 specific. Move PPC64 specific code from kexec/file_load.c to kexec/file_load_64.c. Also, rename purgatory/trampoline.S to purgatory/trampoline_64.S in the same spirit. No functional changes. Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Tested-by: Pingfan Liu <piliu@redhat.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159602276920.575379.10390965946438306388.stgit@hbathini
2020-07-29powerpc/configs: Add BLK_DEV_NVME to pseries_defconfigAnton Blanchard1-0/+1
I've forgotten to manually enable NVME when building pseries kernels for machines with NVME adapters. Since it's a reasonably common configuration, enable it by default. Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200729040828.2312966-1-anton@ozlabs.org
2020-07-29powerpc/64s: Move HMI IRQ stat from percpu variable to paca.Mahesh Salgaonkar5-6/+9
With the proposed change in percpu bootmem allocator to use page mapping [1], the percpu first chunk memory area can come from vmalloc ranges. This makes the HMI (Hypervisor Maintenance Interrupt) handler crash the kernel whenever percpu variable is accessed in real mode. This patch fixes this issue by moving the HMI IRQ stat inside paca for safe access in realmode. [1] https://lore.kernel.org/linuxppc-dev/20200608070904.387440-1-aneesh.kumar@linux.ibm.com/ Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/159290806973.3642154.5244613424529764050.stgit@jupiter
2020-07-29powerpc/fsl/dts: add missing P4080DS I2C devicesDavid Lamparter1-2/+41
This just adds the zl2006 voltage regulators / power monitors and the onboard I2C eeproms. The ICS9FG108 clock chip doesn't seem to have a driver, so it is left in the DTS as a comment. And for good measure, the SPD eeproms are tagged as such. Signed-off-by: David Lamparter <equinox@diac24.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20180920230422.GK487685@eidolon.nox.tf
2020-07-29ocxl: Remove unnecessary externsAlastair D'Silva1-18/+16
Function declarations don't need externs, remove the existing ones so they are consistent with newer code Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200415012343.919255-2-alastair@d-silva.org
2020-07-29powerpc/test_emulate_step: Add testcases for divde[.] and divdeu[.] instructionsBalamuruhan S1-0/+156
Add testcases for divde, divde., divdeu, divdeu. emulated instructions to cover few scenarios, - with same dividend and divisor to have undefine RT for divdeu[.] - with divide by zero to have undefine RT for both divde[.] and divdeu[.] - with negative dividend to cover -|divisor| < r <= 0 if the dividend is negative for divde[.] - normal case with proper dividend and divisor for both divde[.] and divdeu[.] Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728130308.1790982-4-bala24@linux.ibm.com
2020-07-29powerpc/sstep: Add support for divde[.] and divdeu[.] instructionsBalamuruhan S1-1/+12
This patch adds emulation support for divde, divdeu instructions, - Divide Doubleword Extended (divde[.]) - Divide Doubleword Extended Unsigned (divdeu[.]) Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728130308.1790982-3-bala24@linux.ibm.com
2020-07-29powerpc/ppc-opcode: Add divde and divdeu opcodesBalamuruhan S1-0/+6
Include instruction opcodes for divde and divdeu as macros. Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728130308.1790982-2-bala24@linux.ibm.com
2020-07-29Merge branches 'arm/renesas', 'arm/qcom', 'arm/mediatek', 'arm/omap', 'arm/exynos', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'core' into nextJoerg Roedel1-3/+0
2020-07-29powerpc/powernv/sriov: Remove unused but set variable 'phb'Wei Yongjun1-2/+0
Gcc report warning as follows: arch/powerpc/platforms/powernv/pci-sriov.c:602:25: warning: variable 'phb' set but not used [-Wunused-but-set-variable] 602 | struct pnv_phb *phb; | ^~~ This variable is not used, so this commit removing it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200727171112.2781-1-weiyongjun1@huawei.com
2020-07-29powerpc: use for_each_child_of_node() macroQinglang Miao4-9/+6
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200728022807.87815-1-miaoqinglang@huawei.com
2020-07-29powerpc/build: vdso linker warning for orphan sectionsNicholas Piggin4-3/+5
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200303012748.4190929-1-npiggin@gmail.com
2020-07-29powerpc: Use fallthrough pseudo-keywordGustavo A. R. Silva5-8/+8
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200727224201.GA10133@embeddedor
2020-07-29powerpc/book3s64/radix: Add kernel command line option to disable radix GTSEAneesh Kumar K.V5-6/+18
This adds a kernel command line option that can be used to disable GTSE support. Disabling GTSE implies kernel will make hcalls to invalidate TLB entries. This was done so that we can do VM migration between configs that enable/disable GTSE support via hypervisor. To migrate a VM from a system that supports GTSE to a system that doesn't, we can boot the guest with radix_hcall_invalidate=on, thereby forcing the guest to use hcalls for TLB invalidates. The check for hcall availability is done in pSeries_setup_arch so that the panic message appears on the console. This should only happen on a hypervisor that doesn't force the guest to hash translation even though it can't handle the radix GTSE=0 request via CAS. With radix_hcall_invalidate=on if the hypervisor doesn't support hcall_rpt_invalidate hcall it should force the LPAR to hash translation. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200727085908.420806-1-aneesh.kumar@linux.ibm.com
2020-07-29powerpc/kvm/cma: Improve kernel log during bootAneesh Kumar K.V1-1/+1
Current kernel gives: [ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000 [ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node [ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000 With the fix [ 0.000000] kvm_cma_reserve: reserving 26214 MiB for global area [ 0.000000] cma: Reserved 26224 MiB at 0x0000007959000000 [ 0.000000] hugetlb_cma: reserve 65536 MiB, up to 16384 MiB per node [ 0.000000] cma: Reserved 16384 MiB at 0x0000001800000000 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200713150749.25245-2-aneesh.kumar@linux.ibm.com
2020-07-29powerpc/hugetlb/cma: Allocate gigantic hugetlb pages using CMAAneesh Kumar K.V3-0/+28
commit: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") added support for allocating gigantic hugepages using CMA. This patch enables the same for powerpc Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200713150749.25245-1-aneesh.kumar@linux.ibm.com
2020-07-29powerpc/xmon: Use `dcbf` inplace of `dcbi` instruction for 64bit Book3SBalamuruhan S1-1/+1
Data Cache Block Invalidate (dcbi) instruction implemented back in PowerPC architecture version 2.03. But as per Power Processor Users Manual it is obsolete and not supported by POWER8/POWER9 core. Attempt to use of this illegal instruction results in a hypervisor emulation assistance interrupt. So, ifdef it out the option `i` in xmon for 64bit Book3S. 0:mon> fi cpu 0x0: Vector: 700 (Program Check) at [c000000003be74a0] pc: c000000000102030: cacheflush+0x180/0x1a0 lr: c000000000101f3c: cacheflush+0x8c/0x1a0 sp: c000000003be7730 msr: 8000000000081033 current = 0xc0000000035e5c00 paca = 0xc000000001910000 irqmask: 0x03 irq_happened: 0x01 pid = 1025, comm = bash Linux version 5.6.0-rc5-g5aa19adac (root@ltc-wspoon6) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1 SMP Tue Mar 10 04:38:41 CDT 2020 cpu 0x0: Exception 700 (Program Check) in xmon, returning to main loop [c000000003be7c50] c00000000084abb0 __handle_sysrq+0xf0/0x2a0 [c000000003be7d00] c00000000084b3c0 write_sysrq_trigger+0xb0/0xe0 [c000000003be7d30] c0000000004d1edc proc_reg_write+0x8c/0x130 [c000000003be7d60] c00000000040dc7c __vfs_write+0x3c/0x70 [c000000003be7d80] c000000000410e70 vfs_write+0xd0/0x210 [c000000003be7dd0] c00000000041126c ksys_write+0xdc/0x130 [c000000003be7e20] c00000000000b9d0 system_call+0x5c/0x68 --- Exception: c01 (System Call) at 00007fffa345e420 SP (7ffff0b08ab0) is in userspace Signed-off-by: Balamuruhan S <bala24@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200330075954.538773-1-bala24@linux.ibm.com
2020-07-29powerpc: Drop old comment about CONFIG_POWERMichael Ellerman1-1/+0
There's a comment in time.h referring to CONFIG_POWER, which doesn't exist. That confuses scripts/checkkconfigsymbols.py. Presumably the comment was referring to a CONFIG_POWER vs CONFIG_PPC, in which case for CONFIG_POWER we would #define __USE_RTC to 1. But instead we have CONFIG_PPC_BOOK3S_601, and these days we have IS_ENABLED(). So the comment is no longer relevant, drop it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-9-mpe@ellerman.id.au
2020-07-29powerpc/kvm: Use correct CONFIG symbol in commentMichael Ellerman1-1/+1
This comment refers to the non-existent CONFIG_PPC_BOOK3S_XX, which confuses scripts/checkkconfigsymbols.py. Change it to use the correct symbol. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-8-mpe@ellerman.id.au
2020-07-29powerpc/boot: Fix CONFIG_PPC_MPC52XX referencesMichael Ellerman2-2/+2
Commit 866bfc75f40e ("powerpc: conditionally compile platform-specific serial drivers") made some code depend on CONFIG_PPC_MPC52XX, which doesn't exist. Fix it to use CONFIG_PPC_MPC52xx. Fixes: 866bfc75f40e ("powerpc: conditionally compile platform-specific serial drivers") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-7-mpe@ellerman.id.au
2020-07-29powerpc/32s: Remove TAUException wart in traps.cMichael Ellerman2-8/+4
All 32 and 64-bit builds that don't have CONFIG_TAU_INT enabled (all of them), get a definition of TAUException() in traps.c. On 64-bit it's completely useless, and just wastes ~120 bytes of text. On 32-bit it allows the kernel to link because head_32.S calls it unconditionally. Instead follow the example of altivec_assist_exception(), and if CONFIG_TAU_INT is not enabled just point it at unknown_exception using the preprocessor. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-6-mpe@ellerman.id.au
2020-07-29powerpc/32s: Fix CONFIG_BOOK3S_601 usesMichael Ellerman2-2/+2
We have two uses of CONFIG_BOOK3S_601, which doesn't exist. Fix them to use CONFIG_PPC_BOOK3S_601 which is the correct symbol. Fixes: 12c3f1fd87bf ("powerpc/32s: get rid of CPU_FTR_601 feature") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-5-mpe@ellerman.id.au
2020-07-29powerpc/64e: Drop dead BOOK3E_MMU_TLB_STATS codeMichael Ellerman2-96/+4
This code was merged 11 years ago in commit 13363ab9b9d0 ("powerpc: Add definitions used by exception handling on 64-bit Book3E") but was never able to be built because CONFIG_BOOK3E_MMU_TLB_STATS never existed. Remove it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-4-mpe@ellerman.id.au
2020-07-29powerpc/52xx: Fix comment about CONFIG_BDI*Michael Ellerman1-1/+1
There's a comment in lite5200_sleep.S that refers to "CONFIG_BDI*". This confuses scripts/checkkconfigsymbols.py, which thinks it should be able to find CONFIG_BDI. Change the comment to refer to CONFIG_BDI_SWITCH which is presumably roughly what it was referring to. AFAICS there never has been a CONFIG_BDI. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-3-mpe@ellerman.id.au
2020-07-29powerpc/configs: Remove dead symbolsMichael Ellerman15-27/+0
Remove references to symbols that no longer exist as reported by scripts/checkkconfigsymbols.py. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-2-mpe@ellerman.id.au
2020-07-29powerpc/configs: Drop old symbols from ppc6xx_defconfigMichael Ellerman1-39/+0
ppc6xx_defconfig refers to quite a few symbols that no longer exist, as reported by scripts/checkkconfigsymbols.py, remove them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724131728.1643966-1-mpe@ellerman.id.au
2020-07-29powerpc/mm: Limit resize_hpt_for_hotplug() call to hash guests onlyBharata B Rao3-12/+7
During memory hotplug and unplug, resize_hpt_for_hotplug() gets called for both hash and radix guests but it should be called only for hash guests. Though the call does nothing in the radix guest case, it is cleaner to push this call into hash specific memory hotplug routines. Reported-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200727095704.1432916-1-bharata@linux.ibm.com
2020-07-29powerpc/mm: Remove custom stack expansion checkingMichael Ellerman1-104/+5
We have powerpc specific logic in our page fault handling to decide if an access to an unmapped address below the stack pointer should expand the stack VMA. The logic aims to prevent userspace from doing bad accesses below the stack pointer. However as long as the stack is < 1MB in size, we allow all accesses without further checks. Adding some debug I see that I can do a full kernel build and LTP run, and not a single process has used more than 1MB of stack. So for the majority of processes the logic never even fires. We also recently found a nasty bug in this code which could cause userspace programs to be killed during signal delivery. It went unnoticed presumably because most processes use < 1MB of stack. The generic mm code has also grown support for stack guard pages since this code was originally written, so the most heinous case of the stack expanding into other mappings is now handled for us. Finally although some other arches have special logic in this path, from what I can tell none of x86, arm64, arm and s390 impose any extra checks other than those in expand_stack(). So drop our complicated logic and like other architectures just let the stack expand as long as its within the rlimit. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/20200724092528.1578671-4-mpe@ellerman.id.au
2020-07-29powerpc: Allow 4224 bytes of stack expansion for the signal frameMichael Ellerman1-2/+5
We have powerpc specific logic in our page fault handling to decide if an access to an unmapped address below the stack pointer should expand the stack VMA. The code was originally added in 2004 "ported from 2.4". The rough logic is that the stack is allowed to grow to 1MB with no extra checking. Over 1MB the access must be within 2048 bytes of the stack pointer, or be from a user instruction that updates the stack pointer. The 2048 byte allowance below the stack pointer is there to cover the 288 byte "red zone" as well as the "about 1.5kB" needed by the signal delivery code. Unfortunately since then the signal frame has expanded, and is now 4224 bytes on 64-bit kernels with transactional memory enabled. This means if a process has consumed more than 1MB of stack, and its stack pointer lies less than 4224 bytes from the next page boundary, signal delivery will fault when trying to expand the stack and the process will see a SEGV. The total size of the signal frame is the size of struct rt_sigframe (which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on 64-bit). The 2048 byte allowance was correct until 2008 as the signal frame was: struct rt_sigframe { struct ucontext uc; /* 0 1440 */ /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1440 16 */ unsigned int tramp[6]; /* 1456 24 */ struct siginfo * pinfo; /* 1480 8 */ void * puc; /* 1488 8 */ struct siginfo info; /* 1496 128 */ /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1624 288 */ /* size: 1920, cachelines: 15, members: 7 */ /* padding: 8 */ }; 1920 + 128 = 2048 Then in commit ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support") (Jul 2008) the signal frame expanded to 2304 bytes: struct rt_sigframe { struct ucontext uc; /* 0 1696 */ <-- /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ long unsigned int _unused[2]; /* 1696 16 */ unsigned int tramp[6]; /* 1712 24 */ struct siginfo * pinfo; /* 1736 8 */ void * puc; /* 1744 8 */ struct siginfo info; /* 1752 128 */ /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */ char abigap[288]; /* 1880 288 */ /* size: 2176, cachelines: 17, members: 7 */ /* padding: 8 */ }; 2176 + 128 = 2304 At this point we should have been exposed to the bug, though as far as I know it was never reported. I no longer have a system old enough to easily test on. Then in 2010 commit 320b2b8de126 ("mm: keep a guard page below a grow-down stack segment") caused our stack expansion code to never trigger, as there was always a VMA found for a write up to PAGE_SIZE below r1. That meant the bug was hidden as we continued to expand the signal frame in commit 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") (Feb 2013): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ <-- /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[288]; /* 3576 288 */ /* size: 3872, cachelines: 31, members: 8 */ /* padding: 8 */ /* last cacheline: 32 bytes */ }; 3872 + 128 = 4000 And commit 573ebfa6601f ("powerpc: Increase stack redzone for 64-bit userspace to 512 bytes") (Feb 2014): struct rt_sigframe { struct ucontext uc; /* 0 1696 */ /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */ struct ucontext uc_transact; /* 1696 1696 */ /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */ long unsigned int _unused[2]; /* 3392 16 */ unsigned int tramp[6]; /* 3408 24 */ struct siginfo * pinfo; /* 3432 8 */ void * puc; /* 3440 8 */ struct siginfo info; /* 3448 128 */ /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */ char abigap[512]; /* 3576 512 */ <-- /* size: 4096, cachelines: 32, members: 8 */ /* padding: 8 */ }; 4096 + 128 = 4224 Then finally in 2017, commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") exposed us to the existing bug, because it changed the stack VMA to be the correct/real size, meaning our stack expansion code is now triggered. Fix it by increasing the allowance to 4224 bytes. Hard-coding 4224 is obviously unsafe against future expansions of the signal frame in the same way as the existing code. We can't easily use sizeof() because the signal frame structure is not in a header. We will either fix that, or rip out all the custom stack expansion checking logic entirely. Fixes: ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support") Cc: stable@vger.kernel.org # v2.6.27+ Reported-by: Tom Lane <tgl@sss.pgh.pa.us> Tested-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
2020-07-29powerpc/pseries: Add KVM guest doorbell restrictionsNicholas Piggin5-41/+53
KVM guests have certain restrictions and performance quirks when using doorbells. This patch moves the EPAPR KVM guest test so it can be shared with PSERIES, and uses that in doorbell setup code to apply the KVM guest quirks and improves IPI performance for two cases: - PowerVM guests may now use doorbells even if they are secure. - KVM guests no longer use doorbells if XIVE is available. There is a valid complaint that "KVM guest" is not a very reasonable thing to test for, it's preferable for the hypervisor to advertise particular behaviours to the guest so they could change if the hypervisor implementation or configuration changes. However in this case we were already assuming a KVM guest worst case, so this patch is about containing those quirks. If KVM later advertises fast doorbells, we should test for that and override the quirks. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200726035155.1424103-4-npiggin@gmail.com
2020-07-29powerpc/pseries: Use doorbells even if XIVE is availableNicholas Piggin1-18/+36
KVM supports msgsndp in guests by trapping and emulating the instruction, so it was decided to always use XIVE for IPIs if it is available. However on PowerVM systems, msgsndp can be used and gives better performance. On large systems, high XIVE interrupt rates can have sub-linear scaling, and using msgsndp can reduce the load on the interrupt controller. So switch to using core local doorbells even if XIVE is available. This reduces performance for KVM guests with an SMT topology by about 50% for ping-pong context switching between SMT vCPUs. An option vector (or dt-cpu-ftrs) could be defined to disable msgsndp to get KVM performance back. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200726035155.1424103-3-npiggin@gmail.com
2020-07-29powerpc: Inline doorbell sending functionsNicholas Piggin3-58/+63
These are only called in one place for a given platform, so inline them for performance. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Cédric Le Goater <clg@kaod.org> [mpe: Fix build errors related to KVM] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200726035155.1424103-2-npiggin@gmail.com
2020-07-29powerpc/perf: Fix MMCRA_BHRB_DISABLE define for binutils < 2.28Athira Rajeev1-1/+2
Commit 9908c826d5ed ("powerpc/perf: Add Power10 PMU feature to DT CPU features") defines MMCRA_BHRB_DISABLE as `0x2000000000UL`. Binutils version less than 2.28 doesn't support UL suffix. arch/powerpc/kernel/cpu_setup_power.S: Assembler messages: arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: junk at end of line, first unrecognized character is `L' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: found 'L', expected: ')' arch/powerpc/kernel/cpu_setup_power.S:250: Error: operand out of range (0x0000002000000000 is not between 0xffffffffffff8000 and 0x000000000000ffff) Fix this by wrapping it with the `_UL` macro. Fixes: 9908c826d5ed ("Add Power10 PMU feature to DT CPU features") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1595996214-5833-1-git-send-email-atrajeev@linux.vnet.ibm.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.