| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):
int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }
Currently in such a case KVM throws a complete trace like:
[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G W E 5.5.0+ #1
[345523.706031] NIP: c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700 Tainted: G W E (5.5.0+)
[345523.706034] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 24022428 XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0
and then treats the executed instruction as a 'nop'.
However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.
This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
In kvmppc_unmap_free_pte() in book3s_64_mmu_radix.c, we use the
non-constant value PTE_INDEX_SIZE to clear a PTE page.
We can instead use the constant RADIX_PTE_INDEX_SIZE, because we know
this code will only be running when the Radix MMU is active.
Note that we already use RADIX_PTE_INDEX_SIZE for the allocation of
kvm_pte_cache.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
This makes the same changes in the page fault handler for HPT guests
that commits 31c8b0d0694a ("KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot()
in page fault handler", 2018-03-01), 71d29f43b633 ("KVM: PPC: Book3S HV:
Don't use compound_order to determine host mapping size", 2018-09-11)
and 6579804c4317 ("KVM: PPC: Book3S HV: Avoid crash from THP collapse
during radix page fault", 2018-10-04) made for the page fault handler
for radix guests.
In summary, where we used to call get_user_pages_fast() and then do
special handling for VM_PFNMAP vmas, we now call __get_user_pages_fast()
and then __gfn_to_pfn_memslot() if that fails, followed by reading the
Linux PTE to get the host PFN, host page size and mapping attributes.
This also brings in the change from SetPageDirty() to set_page_dirty_lock()
which was done for the radix page fault handler in commit c3856aeb2940
("KVM: PPC: Book3S HV: Fix handling of large pages in radix page fault
handler", 2018-02-23).
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIMM supports labeling. Separate this latter
capability into its own flag so that the NDD_ALIASING flag is scoped to
true aliased configurations.
To my knowledge aliased configurations only exist in the ACPI spec,
there are no known platforms that ship this support in production.
This clarity allows namespace-capacity alignment constraints around
interleave-ways to be relaxed.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
We should be checking that the instruction was stepped *and* that the
target register has the right value.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
[mpe: Write change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200226055302.1577954-1-npiggin@gmail.com
|
|
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200302010410.2957362-1-npiggin@gmail.com
|
|
core99_l2_cache/core99_l3_cache do not need to be marked as volatile,
remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200303085604.24952-1-yuehaibing@huawei.com
|
|
When building with ppc64_defconfig, the compiler reports
that these 2 variables are not used:
warning: unused variable 'core99_l2_cache' [-Wunused-variable]
warning: unused variable 'core99_l3_cache' [-Wunused-variable]
They are only used when CONFIG_PPC64 is not defined. Move
them into a section which does the same macro check.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
[mpe: Move them into core99_init_caches() which is their only user]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190920153951.25762-1-ilie.halip@gmail.com
|
|
In the current implementation, the call to loadcam_multi() is wrapped
between switch_to_as1() and restore_to_as0() calls so, when it tries
to create its own temporary AS=1 TLB1 entry, it ends up duplicating
the existing one created by switch_to_as1(). Add a check to skip
creating the temporary entry if already running in AS=1.
Fixes: d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
|
|
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers. linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Refactor memslot handling to treat the number of used slots as the de
facto size of the memslot array, e.g. return NULL from id_to_memslot()
when an invalid index is provided instead of relying on npages==0 to
detect an invalid memslot. Rework the sorting and walking of memslots
in advance of dynamically sizing memslots to aid bisection and debug,
e.g. with luck, a bug in the refactoring will bisect here and/or hit a
WARN instead of randomly corrupting memory.
Alternatively, a global null/invalid memslot could be returned, i.e. so
callers of id_to_memslot() don't have to explicitly check for a NULL
memslot, but that approach runs the risk of introducing difficult-to-
debug issues, e.g. if the global null slot is modified. Constifying
the return from id_to_memslot() to combat such issues is possible, but
would require a massive refactoring of arch specific code and would
still be susceptible to casting shenanigans.
Add function comments to update_memslots() and search_memslots() to
explicitly (and loudly) state how memslots are sorted.
Opportunistically stuff @hva with a non-canonical value when deleting a
private memslot on x86 to detect bogus usage of the freed slot.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rework kvm_get_dirty_log() so that it "returns" the associated memslot
on success. A future patch will rework memslot handling such that
id_to_memslot() can return NULL, returning the memslot makes it more
obvious that the validity of the memslot has been verified, i.e.
precludes the need to add validity checks in the arch code that are
technically unnecessary.
To maintain ordering in s390, move the call to kvm_arch_sync_dirty_log()
from s390's kvm_vm_ioctl_get_dirty_log() to the new kvm_get_dirty_log().
This is a nop for PPC, the only other arch that doesn't select
KVM_GENERIC_DIRTYLOG_READ_PROTECT, as its sync_dirty_log() is empty.
Ideally, moving the sync_dirty_log() call would be done in a separate
patch, but it can't be done in a follow-on patch because that would
temporarily break s390's ordering. Making the move in a preparatory
patch would be functionally correct, but would create an odd scenario
where the moved sync_dirty_log() would operate on a "different" memslot
due to consuming the result of a different id_to_memslot(). The
memslot couldn't actually be different as slots_lock is held, but the
code is confusing enough as it is, i.e. moving sync_dirty_log() in this
patch is the lesser of all evils.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the implementations of KVM_GET_DIRTY_LOG and KVM_CLEAR_DIRTY_LOG
for CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT into common KVM code.
The arch specific implemenations are extremely similar, differing
only in whether the dirty log needs to be sync'd from hardware (x86)
and how the TLBs are flushed. Add new arch hooks to handle sync
and TLB flush; the sync will also be used for non-generic dirty log
support in a future patch (s390).
The ulterior motive for providing a common implementation is to
eliminate the dependency between arch and common code with respect to
the memslot referenced by the dirty log, i.e. to make it obvious in the
code that the validity of the memslot is guaranteed, as a future patch
will rework memslot handling such that id_to_memslot() can return NULL.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that all callers of kvm_free_memslot() pass NULL for @dont, remove
the param from the top-level routine and all arch's implementations.
No functional change intended.
Tested-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop the "const" attribute from @old in kvm_arch_commit_memory_region()
to allow arch specific code to free arch specific resources in the old
memslot without having to cast away the attribute. Freeing resources in
kvm_arch_commit_memory_region() paves the way for simplifying
kvm_free_memslot() by eliminating the last usage of its @dont param.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_arch_create_memslot() now that all arch implementations are
effectively nops. Removing kvm_arch_create_memslot() eliminates the
possibility for arch specific code to allocate memory prior to setting
a memslot, which sets the stage for simplifying kvm_free_memslot().
Cc: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allocate the rmap array during kvm_arch_prepare_memory_region() to pave
the way for removing kvm_arch_create_memslot() altogether. Moving PPC's
memory allocation only changes the order of kernel memory allocations
between PPC and common KVM code.
No functional change intended.
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The original 2005 patch that introduced the powerpc vdso, pre-git
("ppc64: Implement a vDSO and use it for signal trampoline") notes that:
... symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both
seen as if they were linked at 0 and the symbols just contain offsets
to the various functions. This is done on purpose to avoid a
relocation step (ppc64 functions normally have descriptors with abs
addresses in them). When glibc uses those functions, it's expected to
use it's own trampolines that know how to reach them.
Despite that explanation, there remains dead #ifdef
VDS64_HAS_DESCRIPTORS code-blocks that provide alternate function
definitions that setup function descriptors.
Since VDS64_HAS_DESCRIPTORS has been unused for all these years, we
might as well finally remove it from the codebase.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200224211848.26087-1-joe.lawrence@redhat.com
|
|
Commit 2efc7c085f05 ("powerpc/32: drop get_pteptr()"),
replaced get_pteptr() by virt_to_kpte(). But virt_to_kpte() lacks a
NULL pmd check and returns an invalid non NULL pointer when there
is no page table.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 2efc7c085f05 ("powerpc/32: drop get_pteptr()")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b1177cdfc6af74a3e277bba5d9e708c4b3315ebe.1583575707.git.christophe.leroy@c-s.fr
|
|
With CONFIG_KASAN_VMALLOC, new page tables are created at the time
shadow memory for vmalloc area is unmapped. If some parts of the
page table still have entries to the zero page shadow memory, the
entries are wrongly marked RW.
With CONFIG_KASAN_VMALLOC, almost the entire kernel address space
is managed by KASAN. To make it simple, just create KASAN page tables
for the entire kernel space at kasan_init(). That doesn't use much
more space, and that's anyway already done for hash platforms.
Fixes: 3d4247fcc938 ("powerpc/32: Add support of KASAN_VMALLOC")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ef5248fc1f496c6b0dfdb59380f24968f25f75c5.1583513368.git.christophe.leroy@c-s.fr
|
|
Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Philipp Rudo <prudo@linux.ibm.com> (s390)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Merge in our fixes branch. In particular we want to merge the TM and KUAP fixes,
so we can add selftests for them in next.
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Stefan reported a strange kernel fault which turned out to be due to a
missing KUAP disable in flush_coherent_icache() called from
flush_icache_range().
The fault looks like:
Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009)
BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00
Faulting instruction address: 0xc00000000007232c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79
NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000
REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40)
MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000
CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0
GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00
GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000
GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80
GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000
GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000
GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20
GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80
GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00
NIP flush_icache_range+0x5c/0x80
LR handle_rt_signal64+0x95c/0xc2c
Call Trace:
0xc000001e11093d90 (unreliable)
handle_rt_signal64+0x93c/0xc2c
do_notify_resume+0x310/0x430
ret_from_except_lite+0x70/0x74
Instruction dump:
409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d
60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070
This path through handle_rt_signal64() to setup_trampoline() and
flush_icache_range() is only triggered by 64-bit processes that have
unmapped their VDSO, which is rare.
flush_icache_range() takes a range of addresses to flush. In
flush_coherent_icache() we implement an optimisation for CPUs where we
know we don't actually have to flush the whole range, we just need to
do a single icbi.
However we still execute the icbi on the user address of the start of
the range we're flushing. On CPUs that also implement KUAP (Power9)
that leads to the spurious fault above.
We should be able to pass any address, including a kernel address, to
the icbi on these CPUs, which would avoid any interaction with KUAP.
But I don't want to make that change in a bug fix, just in case it
surfaces some strange behaviour on some CPU.
So for now just disable KUAP around the icbi. Note the icbi is treated
as a load, so we allow read access, not write as you'd expect.
Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200303235708.26004-1-mpe@ellerman.id.au
|
|
With commit ("powerpc/numa: Early request for home node associativity"),
commit 2ea626306810 ("powerpc/topology: Get topology for shared
processors at boot") which was requesting home node associativity
becomes redundant.
Hence remove the late request for home node associativity.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-6-srikar@linux.vnet.ibm.com
|
|
Currently the kernel detects if its running on a shared lpar platform
and requests home node associativity before the scheduler sched_domains
are setup. However between the time NUMA setup is initialized and the
request for home node associativity, workqueue initializes its per node
cpumask. The per node workqueue possible cpumask may turn invalid
after home node associativity resulting in weird situations like
workqueue possible cpumask being a subset of workqueue online cpumask.
This can be fixed by requesting home node associativity earlier just
before NUMA setup. However at the NUMA setup time, kernel may not be in
a position to detect if its running on a shared lpar platform. So
request for home node associativity and if the request fails, fallback
on the device tree property.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-5-srikar@linux.vnet.ibm.com
|
|
All the sibling threads of a core have to be part of the same node.
To ensure that all the sibling threads map to the same node, always
lookup/update the cpu-to-node map of the first thread in the core.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-4-srikar@linux.vnet.ibm.com
|
|
Currently code handles H_FUNCTION, H_SUCCESS, H_HARDWARE return codes.
However hcall_vphn can return other return codes. Now it also handles
H_PARAMETER return code. Also the rest return codes are handled under the
default case.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-3-srikar@linux.vnet.ibm.com
|
|
There is no value in unpacking associativity, if
H_HOME_NODE_ASSOCIATIVITY hcall has returned an error.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135301.24739-2-srikar@linux.vnet.ibm.com
|
|
package_id is to match cores that are part of the same chip. On
PowerNV machines, package_id defaults to chip_id. However ibm,chip_id
property is not present in device-tree of PowerVM LPARs. Hence lscpu
output shows one core per socket and multiple cores.
To overcome this, use nid as the package_id on PowerVM LPARs.
Before the patch:
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 8
Core(s) per socket: 1 <----------------------
Socket(s): 16 <----------------------
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-63
NUMA node1 CPU(s): 64-127
#
# cat /sys/devices/system/cpu/cpu0/topology/physical_package_id
-1
After the patch:
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 8 <---------------------
Core(s) per socket: 8 <---------------------
Socket(s): 2
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-63
NUMA node1 CPU(s): 64-127
#
# cat /sys/devices/system/cpu/cpu0/topology/physical_package_id
0
Now lscpu output is more in line with the system configuration.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Use pkg_id instead of ppid, tweak change log and comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200129135121.24617-1-srikar@linux.vnet.ibm.com
|
|
Until commit 7306e83ccf5c ("powerpc: Don't use CURRENT_THREAD_INFO to
find the stack"), the current stack base address was obtained by
calling current_thread_info(). That inline function was simply masking
out the value of r1.
In that commit, it was changed to using current_stack_pointer() (since
renamed current_stack_frame()), which is a heavier function as it is
an outline assembly function which cannot be inlined and which reads
the content of the stack at 0(r1).
Convert to using current_stack_pointer for geting r1 and masking out
its value to obtain the base address of the stack pointer as before.
Fixes: 7306e83ccf5c ("powerpc: Don't use CURRENT_THREAD_INFO to find the stack")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220115141.2707-5-mpe@ellerman.id.au
|
|
Instead of #ifdef, use IS_ENABLED(CONFIG_DEBUG_STACKOVERFLOW).
This enable GCC to check for code validity even when the option
is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220115141.2707-4-mpe@ellerman.id.au
|
|
The purpose of check_stack_overflow() is to verify that the stack has
not overflowed.
To really know whether the stack pointer is still within boundaries,
the check must be done directly on the value of r1.
So use current_stack_pointer, which returns the current value of r1,
rather than current_stack_frame() which causes a frame to be created
and then returns that value.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220115141.2707-3-mpe@ellerman.id.au
|
|
current_stack_frame() doesn't return the stack pointer, but the
caller's stack frame. See commit bfe9a2cfe91a ("powerpc: Reimplement
__get_SP() as a function not a define") and commit
acf620ecf56c ("powerpc: Rename __get_SP() to current_stack_pointer()")
for details.
In some cases this is overkill or incorrect, as it doesn't return the
current value of r1.
So add a current_stack_pointer register global to get the value of r1
directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of other patch, tweak change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220115141.2707-2-mpe@ellerman.id.au
|
|
current_stack_pointer(), which was called __get_SP(), used to just
return the value in r1.
But that caused problems in some cases, so it was turned into a
function in commit bfe9a2cfe91a ("powerpc: Reimplement __get_SP() as a
function not a define").
Because it's a function in a separate compilation unit to all its
callers, it has the effect of causing a stack frame to be created, and
then returns the address of that frame. This is good in some cases
like those described in the above commit, but in other cases it's
overkill, we just need to know what stack page we're on.
On some other arches current_stack_pointer is just a register global
giving the stack pointer, and we'd like to do that too. So rename our
current_stack_pointer() to current_stack_frame() to make that
possible.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200220115141.2707-1-mpe@ellerman.id.au
|
|
Many of the performance monitoring unit (PMU) SPRs are
exposed in the sysfs. This may not be a desirable since
"perf" API is the primary interface to program PMU and
collect counter data in the system. But that said, we
cant remove these sysfs files since we dont whether
anyone/anything is using them.
So the patch adds a new CONFIG option 'CONFIG_PMU_SYSFS'
(user selectable) to be used in sysfs file creation for
PMU SPRs. New option by default is disabled, but can be
enabled if user needs it.
Tested this patch behaviour in powernv and pseries machines.
Patch is also tested for pmac32_defconfig.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200214080606.26872-2-kjain@linux.ibm.com
|
|
An attempt to refactor the current sysfs.c file.
To start with a big chuck of macro #defines and dscr
functions are moved to start of the file. Secondly,
HAS_ #define macros are cleanup based on CONFIG_ options
Finally new HAS_ macro added:
1. HAS_PPC_PA6T (for PA6T) to separate out non-PMU SPRs.
2. HAS_PPC_PMC56 to separate out PMC SPR's from HAS_PPC_PMC_CLASSIC
which come under CONFIG_PPC64.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200214080606.26872-1-kjain@linux.ibm.com
|
|
Add a way to manually invoke a fast-reboot rather than setting the NVRAM
flag. The idea is to allow userspace to invoke a fast-reboot using the
optional string argument to the reboot() system call, or using the xmon
zr command so we don't need to leave around a persistent changes on
a system to use the feature.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200217024833.30580-2-oohall@gmail.com
|
|
Treat an empty reboot cmd string the same as a NULL string. This squashes a
spurious unsupported reboot message that sometimes gets out when using
xmon.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200217024833.30580-1-oohall@gmail.com
|
|
Some of our phony targets are not marked as such. This can lead to
confusing errors, eg:
$ make clean
$ touch install
$ make install
make: 'install' is up to date.
$
Fix it by adding them to the PHONY variable which is marked phony in
the top-level Makefile, or in scripts/Makefile.build for the boot
Makefile.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200219000434.15872-1-mpe@ellerman.id.au
|
|
On PPC32, pte_offset_map() does a kmap_atomic() in order to support
page tables allocated in high memory, just like ARM and x86/32.
But since at least 2008 and commit 8054a3428fbe ("powerpc: Remove dead
CONFIG_HIGHPTE"), page tables are never allocated in high memory.
When the page is in low mem, kmap_atomic() just returns the page
address but still disable preemption and pagefault. And it is
not an inlined function, so we suffer function call for no reason.
Make pte_offset_map() the same as pte_offset_kernel() and make
pte_unmap() void, in the same way as PPC64 which doesn't have HIGHMEM.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/03c97f0f6b3790d164822563be80f2fd4713a955.1581932480.git.christophe.leroy@c-s.fr
|
|
The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.
This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.
Fixes: eb9d7a62c386 ("powerpc/mm_iommu: Fix potential deadlock")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-6-gregkh@linuxfoundation.org
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-5-gregkh@linuxfoundation.org
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-4-gregkh@linuxfoundation.org
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-3-gregkh@linuxfoundation.org
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because of this cleanup, we get to remove a few fields in struct
kvm_arch that are now unused.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Fix build error in kvm/timing.c, adapt kvmppc_remove_cpu_debugfs()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-2-gregkh@linuxfoundation.org
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200209105901.1620958-1-gregkh@linuxfoundation.org
|
|
In some error handling path, we should call "of_node_put(np_par)" or
some resource may be leaking in case of error.
Fixes: 8159df72d43e ("83xx: add support for the kmeter1 board.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200208140920.7652-1-christophe.jaillet@wanadoo.fr
|
|
"couldn;t" should be "couldn't".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200208140904.7521-1-christophe.jaillet@wanadoo.fr
|
Gustavo Romero
Michael Ellerman
Paul Mackerras
Dan Williams
Nicholas Piggin
YueHaibing
Ilie Halip
Laurentiu Tudor
Peter Xu
Sean Christopherson
Joe Lawrence
Christophe Leroy
Nayna Jain
Ingo Molnar
Srikar Dronamraju
Kajol Jain
Madhavan Srinivasan
Oliver O'Halloran
Alexey Kardashevskiy
Greg Kroah-Hartman
Christophe JAILLET