aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2022-05-06powerpc: Reduce csum_add() complexity for PPC64Christophe Leroy1-5/+4
PPC64 does everything in C, gcc is able to skip calculation when one of the operands in zero. Move the constant folding in PPC32 part. This helps GCC and reduces ppc64_defconfig by 170 bytes. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a4ca63dd4c4b09e1906d08fb814af5a41d0f3fcb.1644651363.git.christophe.leroy@csgroup.eu
2022-05-06powerpc/64: remove system call instruction emulationNicholas Piggin2-46/+10
emulate_step() instruction emulation including sc instruction emulation initially appeared in xmon. It was then moved into sstep.c where kprobes could use it too, and later hw_breakpoint and uprobes started to use it. Until uprobes, the only instruction emulation users were for kernel mode instructions. - xmon only steps / breaks on kernel addresses. - kprobes is kernel only. - hw_breakpoint only emulates kernel instructions, single steps user. At one point, there was support for the kernel to execute sc instructions, although that is long removed and it's not clear whether there were any in-tree users. So system call emulation is not required by the above users. uprobes uses emulate_step and it appears possible to emulate sc instruction in userspace. Userspace system call emulation is broken and it's not clear it ever worked well. The big complication is that userspace takes an interrupt to the kernel to emulate the instruction. The user->kernel interrupt sets up registers and interrupt stack frame expecting to return to userspace, then system call instruction emulation re-directs that stack frame to the kernel, early in the system call interrupt handler. This means the interrupt return code takes the kernel->kernel restore path, which does not restore everything as the system call interrupt handler would expect coming from userspace. regs->iamr appears to get lost for example, because the kernel->kernel return does not restore the user iamr. Accounting such as irqflags tracing and CPU accounting does not get flipped back to user mode as the system call handler expects, so those appear to enter the kernel twice without returning to userspace. These things may be individually fixable with various complication, but it is a big complexity for unclear real benefit. Furthermore, it is not possible to single step a system call instruction since it causes an interrupt. As such, a separate patch disables probing on system call instructions. This patch removes system call emulation and disables stepping system calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [minor commit log edit, and also get rid of '#ifdef CONFIG_PPC64'] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a412e3b3791ed83de18704c8d90f492e7a0049c0.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
2022-05-06powerpc: Reject probes on instructions that can't be single steppedNaveen N. Rao5-8/+66
Per the ISA, a Trace interrupt is not generated for: - [h|u]rfi[d] - rfscv - sc, scv, and Trap instructions that trap - Power-Saving Mode instructions - other instructions that cause interrupts (other than Trace interrupts) - the first instructions of any interrupt handler (applies to Branch and Single Step tracing; CIABR matches may still occur) - instructions that are emulated by software Add a helper to check for instructions belonging to the first four categories above and to reject kprobes, uprobes and xmon breakpoints on such instructions. We reject probing on instructions belonging to these categories across all ISA versions and across both BookS and BookE. For trap instructions, we can't know in advance if they can cause a trap, and there is no good reason to allow probing on those. Also, uprobes already refuses to probe trap instructions and kprobes does not allow probes on trap instructions used for kernel warnings and bugs. As such, stop allowing any type of probes/breakpoints on trap instruction across uprobes, kprobes and xmon. For some of the fp/altivec instructions that can generate an interrupt and which we emulate in the kernel (altivec assist, for example), we check and turn off single stepping in emulate_single_step(). Instructions generating a DSI are restarted and single stepping normally completes once the instruction is completed. In uprobes, if a single stepped instruction results in a non-fatal signal to be delivered to the task, such signals are "delayed" until after the instruction completes. For fatal signals, single stepping is cancelled and the instruction restarted in-place so that core dump captures proper addresses. In kprobes, we do not allow probes on instructions having an extable entry and we also do not allow probing interrupt vectors. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f56ee979d50b8711fae350fc97870f3ca34acd75.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
2022-05-06powerpc: Sort and de-dup primary opcodes in ppc-opcode.hNaveen N. Rao1-38/+31
Some of the primary opcodes are duplicated. Remove those, and sort the rest of the primary opcodes to make it easy to read. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a05edf638a2638d708fc2db0272f6317837b5eab.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
2022-05-05powerpc: fix typos in commentsJulia Lawall83-104/+104
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2022-05-05powerpc/boot: Stop using RELACOUNTAlexey Kardashevskiy1-16/+29
So far the RELACOUNT tag from the ELF header was containing the exact number of R_PPC_RELATIVE/R_PPC64_RELATIVE relocations. However the LLVM's recent change [1] make it equal-or-less than the actual number which makes it useless. This replaces RELACOUNT in zImage loader with a pair of RELASZ and RELAENT. The vmlinux relocation code is fixed in commit d79976918852 ("powerpc/64: Add UADDR64 relocation support"). To make it more future proof, this walks through the entire .rela.dyn section instead of assuming that the section is sorter by a relocation type. Unlike d79976918852, this does not add unaligned UADDR/UADDR64 relocations as we are likely not to see those in practice - the zImage is small and very arch specific so there is a smaller chance that some generic feature (such as PRINK_INDEX) triggers unaligned relocations. [1] https://github.com/llvm/llvm-project/commit/da0e5b885b25cf4 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220406070038.3704604-1-aik@ozlabs.ru
2022-05-05powerpc: Simplify and move arch_randomize_brk()Christophe Leroy2-41/+19
arch_randomize_brk() is only needed for hash on book3s/64, for other platforms the one provided by the default mmap layout is good enough. Move it to hash_utils.c and use randomize_page() like the generic one. And properly opt out the radix case instead of making an assumption on mmu_highuser_ssize. Also change to a 32M range like most other architectures instead of 8M. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/eafa4d18ec8ac7b98dd02b40181e61643707cc7c.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Convert to default topdown mmap layoutChristophe Leroy4-109/+2
Select CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT and remove arch/powerpc/mm/mmap.c This change reuses the generic framework added by commit 67f3977f805b ("arm64, mm: move generic mmap layout functions to mm") without any functional change. Comparison between powerpc implementation and the generic one: - mmap_is_legacy() is identical. - arch_mmap_rnd() does exactly the same allthough it's written slightly differently. - MIN_GAP and MAX_GAP are identical. - mmap_base() does the same but uses STACK_RND_MASK which provides the same values as stack_maxrandom_size(). - arch_pick_mmap_layout() is identical. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/518f9def87d3c889d5958103e7463cf45a2f673d.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Enable full randomisation of memory mappingsChristophe Leroy2-12/+8
Do like most other architectures and provide randomisation also to "legacy" memory mappings, by adding the random factor to mm->mmap_base in arch_pick_mmap_layout(). See commit 8b8addf891de ("x86/mm/32: Enable full randomization on i386 and X86_32") for all explanations and benefits of that mmap randomisation. At the moment, slice_find_area_bottomup() doesn't use mm->mmap_base but uses the fixed TASK_UNMAPPED_BASE instead. slice_find_area_bottomup() being used as a fallback to slice_find_area_topdown(), it can't use mm->mmap_base directly. Instead of always using TASK_UNMAPPED_BASE as base address, leave it to the caller. When called from slice_find_area_topdown() TASK_UNMAPPED_BASE is used. Otherwise mm->mmap_base is used. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/417fb10dde828534c73a03138b49621d74f4e5be.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Move get_unmapped_area functions to slice.cChristophe Leroy5-63/+48
hugetlb_get_unmapped_area() is now identical to the generic version if only RADIX is enabled, so move it to slice.c and let it fallback on the generic one when HASH MMU is not compiled in. Do the same with arch_get_unmapped_area() and arch_get_unmapped_area_topdown(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b5d9c124e82889e0cb115c150915a0c0d84eb960.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Use generic_hugetlb_get_unmapped_area()Christophe Leroy3-62/+1
Use the generic version of arch_hugetlb_get_unmapped_area() which is now available at all time. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/05f77014c619061638ecc52a0a4136eb04cc2799.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Use generic_get_unmapped_area() and call it from arch_get_unmapped_area()Christophe Leroy2-121/+14
Use the generic version of arch_get_unmapped_area() which is now available at all time instead of its copy radix__arch_get_unmapped_area() To allow that for PPC64, add arch_get_mmap_base() and arch_get_mmap_end() macros. Instead of setting mm->get_unmapped_area() to either arch_get_unmapped_area() or generic_get_unmapped_area(), always set it to arch_get_unmapped_area() and call generic_get_unmapped_area() from there when radix is enabled. Do the same with radix__arch_get_unmapped_area_topdown() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/393be1fa386446443682fdb74544d733f68ef3bb.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Remove CONFIG_PPC_MM_SLICESChristophe Leroy8-36/+5
CONFIG_PPC_MM_SLICES is always selected by hash book3s/64. CONFIG_PPC_MM_SLICES is never selected by other platforms. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/dc2cdc204de8978574bf7c02329b6cfc4db0bce7.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Make slice specific to book3s/64Christophe Leroy9-63/+20
Since commit 555904d07eef ("powerpc/8xx: MM_SLICE is not needed anymore") only book3s/64 selects CONFIG_PPC_MM_SLICES. Move slice.c into mm/book3s64/ Move necessary stuff in asm/book3s/64/slice.h and remove asm/slice.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4a0d74ef1966a5902b5fd4ac4b513a760a6d675a.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05powerpc/mm: Move vma_mmu_pagesize()Christophe Leroy2-11/+9
vma_mmu_pagesize() is only required for slices, otherwise there is a generic weak version doing the exact same thing. Move it to slice.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1302e000d529c93d07208f1fae90f938e7a551b4.1649523076.git.christophe.leroy@csgroup.eu
2022-05-05Merge tag 'v5.18-rc4' into nextMichael Ellerman11-83/+84
Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb: allow for "high" userspace addresses"), which is needed as a prerequisite for the series converting powerpc to the generic mmap logic.
2022-05-04powerpc/vdso: Fix incorrect CFI in gettimeofday.SMichael Ellerman1-2/+7
As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d8056e38b ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () #4 0x000000010000d180 in print_current_files () #5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #4 0x000000010000d180 in print_current_files () (gdb) #5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down #4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d8056e38b ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Link: https://lore.kernel.org/r/20220502125010.1319370-1-mpe@ellerman.id.au
2022-05-04powerpc/pseries/vas: Use QoS credits from the userspaceHaren Myneni3-17/+27
The user can change the QoS credits dynamically with the management console interface which notifies OS with sysfs. After returning from the OS interface successfully, the management console updates the hypervisor. Since the VAS capabilities in the hypervisor is not updated when the OS gets the update, the kernel is using the old total credits value from the hypervisor. Fix this issue by using the new QoS credits from the userspace instead of depending on VAS capabilities from the hypervisor. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/76d156f8af1e03cc09369d68e0bfad0c40031bcc.camel@linux.ibm.com
2022-05-04powerpc/eeh: Remove unused inline functionsYueHaibing2-5/+3
pseries_eeh_init_edev() is used exclusively in eeh_pseries.c, make it static and remove unused inline function. pseries_eeh_init_edev_recursive() is only called from files build wich CONFIG_HOTPLUG_PCI_RPA which depends on CONFIG_PSERIES and CONFIG_EEH, so can remove the unused inline version. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220316104239.26508-1-yuehaibing@huawei.com
2022-05-04powerpc/powermac: Use for_each_property_of_node()Michael Ellerman1-1/+1
Replace open-coded for loop with for_each_property_of_node(). Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2022-05-04powerpc/4xx/cpm: Fix return value of __setup() handlerRandy Dunlap1-1/+1
__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from cpm_powersave_off(). Fixes: d164f6d4f910 ("powerpc/4xx: Add suspend and idle support") Reported-by: Igor Zhbanov <izh1979@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220502192941.20955-1-rdunlap@infradead.org
2022-05-04powerpc/idle: Fix return value of __setup() handlerRandy Dunlap1-1/+1
__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from powersave_off(). Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop") Reported-by: Igor Zhbanov <izh1979@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
2022-05-04powerpc/5xx: Drop unnecessary castWang Qing1-1/+1
do_div() does a 64-by-32 division, the 2nd parameter is a u32. gbp->ipb_freq is already a u32, there's no need to transform it to u64 before passing it to do_div(). Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add some detail to change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1644395696-3545-1-git-send-email-wangqing@vivo.com
2022-05-04powerpc/book3e: Fix sparse report in mm/nohash/fsl_book3e.cChristophe Leroy2-3/+6
Make tlbcam_addrs[] static. Declare TLBCAM[] in mm/mmu_decl.h And use NULL instead of 0 as pointer when calling restore_to_as0(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fd0cc30b5556428ce1d8a1fc0f983b462e88a956.1647200488.git.christophe.leroy@csgroup.eu
2022-05-04powerpc/kuap: Remove unused inline function __kuap_assert_locked()YueHaibing1-1/+0
commit 2341964e27b0 ("powerpc/kuap: Remove __kuap_assert_locked()") left behind this one, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220311130017.22936-1-yuehaibing@huawei.com
2022-05-04powerpc/smp: Remove unused inline functionsYueHaibing1-2/+0
commit 441c19c8a290 ("powerpc/kvm/book3s_hv: Rework the secondary inhibit code") left behind this, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210324140752.11320-1-yuehaibing@huawei.com
2022-05-04powerpc: Remove redundant spaces to match coding stylemaqiang1-1/+1
These one line of code don't meet the kernel coding style, so remove the redundant space. Signed-off-by: maqiang <maqianga@uniontech.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210303115710.30886-1-maqianga@uniontech.com
2022-05-04powerpc: Fix missing declaration of [en/dis]able_kernel_altivec()Magali Lemes1-0/+9
When CONFIG_PPC64 is set and CONFIG_ALTIVEC is not the following build failures occur: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_begin': >> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:61:17: error: implicit declaration of function 'enable_kernel_altivec'; did you mean 'enable_kernel_vsx'? [-Werror=implicit-function-declaration] 61 | enable_kernel_altivec(); | ^~~~~~~~~~~~~~~~~~~~~ | enable_kernel_vsx drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c: In function 'dc_fpu_end': >> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/dc_fpu.c:89:17: error: implicit declaration of function 'disable_kernel_altivec'; did you mean 'disable_kernel_vsx'? [-Werror=implicit-function-declaration] 89 | disable_kernel_altivec(); | ^~~~~~~~~~~~~~~~~~~~~~ | disable_kernel_vsx cc1: some warnings being treated as errors This commit adds stub instances of both enable_kernel_altivec() and disable_kernel_altivec() the same way as done in commit bd73758803c2 regarding enable_kernel_vsx() and disable_kernel_vsx(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220221230741.293064-1-magalilemes00@gmail.com
2022-05-04powerpc/fadump: Use swap() instead of open coding itJiapeng Chong1-6/+2
Clean the following coccicheck warning: ./arch/powerpc/kernel/fadump.c:1291:34-35: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220129034847.76902-1-jiapeng.chong@linux.alibaba.com
2022-05-04powerpc: No need to initialise statics to 0Xiang wangx1-1/+1
Static variables do not need to be initialised to 0, because compiler will initialise all uninitialised statics to 0. Thus, remove the unneeded initializations. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221033423.29820-1-wangxiang@cdjrlc.com
2022-05-04powerpc/fadump: Correct two typos in a commentRandy Dunlap1-2/+2
Fix typos of 'remaining' and 'those'. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Matthew Wilcox <willy@infradead.org> # 'remaining' Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211030002619.2063-1-rdunlap@infradead.org
2022-05-04powerpc: use strscpy to replace strlcpyJason Wang1-1/+1
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210807072154.64512-1-wangborong@cdjrlc.com
2022-05-04powerpc/perf/24x7: use 'unsigned int' instead of 'unsigned'Jason Wang1-20/+20
Replace the 'unsigned' with 'unsigned int' which is more accurate. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> [chleroy: Fixed parenthesis alignment] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729115252.40895-1-wangborong@cdjrlc.com
2022-05-04powerpc/powernv: Switch from __FUNCTION__ to __func__Dwaipayan Ray1-1/+1
__FUNCTION__ exists only for backwards compatibility reasons with old gcc versions. Replace it with __func__. Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210711084837.95577-1-dwaipayanray1@gmail.com
2022-05-04powerpc/mm: Switch from __FUNCTION__ to __func__Dwaipayan Ray1-2/+1
__FUNCTION__ exists only for backwards compatibility reasons with old gcc versions. Replace it with __func__. Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com> [chleroy: Fixed parenthesis alignment] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210711084536.95394-1-dwaipayanray1@gmail.com
2022-05-04powerpc: Fix spelling mistake "mesages" -> "messages" in KconfigColin Ian King1-1/+1
There is a spelling mistake in the Kconfig text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210704093846.36972-1-colin.king@canonical.com
2022-05-04powerpc/rtas: Replaced simple_strtoull() with kstrtoull()Chen Huang1-6/+1
The simple_strtoull() function is deprecated in some situation, since it does not check for the range overflow, use kstrtoull() instead. Signed-off-by: Chen Huang <chenhuang5@huawei.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210526092020.554341-1-chenhuang5@huawei.com
2022-05-04powerpc/mpc52xx: Fix some pr_debug() issuesRandy Dunlap1-15/+6
Fix some pr_debug() issues in mpc52xx_pci.c: - use __func__ to print function names - use "%pr" to print struct resource entries - use "%pa" to print a resource_size_t (phys_addr_t) The latter two fix several build warnings: ../arch/powerpc/platforms/52xx/mpc52xx_pci.c: In function 'mpc52xx_pci_setup': ../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=] ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:40: note: format string is defined here 277 | pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n", | ~^ | | | unsigned int | %llx ../include/linux/kern_levels.h:5:18: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=] ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:277:49: note: format string is defined here 277 | pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n", | ~^ | | | unsigned int | %llx ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:299:36: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 299 | (unsigned long long)res->flags, (void*)hose->io_base_phys); | ^ ../arch/powerpc/platforms/52xx/mpc52xx_pci.c:295:2: note: in expansion of macro 'pr_debug' 295 | pr_debug(".io_resource={.start=%llx,.end=%llx,.flags=%llx} " | ^~~~~~~~ The change to print mem_resource[0] is for consistency within this source file and to use the kernel API -- there were no warnings here. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [chleroy: Fixed checkpatch complaints] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210429005323.8195-1-rdunlap@infradead.org
2022-05-04powerpc/pmac: remove unused symbolZucheng Zheng1-4/+0
sccdbg symbol is not used, so remove it Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zucheng Zheng <zhengzucheng@huawei.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210409093519.118000-1-zhengzucheng@huawei.com
2022-05-04powerpc: make 'boot_text_mapped' staticYu Kuai1-1/+1
The sparse tool complains as follow: arch/powerpc/kernel/btext.c:48:5: warning: symbol 'boot_text_mapped' was not declared. Should it be static? This symbol is not used outside of btext.c, so this commit make it static. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210408011801.557004-3-yukuai3@huawei.com
2022-05-04powerpc: remove set but not used variable 'force_printk_to_btext'Yu Kuai1-1/+0
Fixes gcc '-Wunused-but-set-variable' warning: arch/powerpc/kernel/btext.c:49:12: error: 'force_printk_to_btext' defined but not used. It is never used, and so can be removed. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210408011801.557004-2-yukuai3@huawei.com
2022-05-04powerpc/pseries/cmm: Remove unneeded variable "ret"zuoqilin1-3/+1
Remove unneeded variable: "ret". Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Just return NOTIFY_OK directly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210326075619.48-1-zuoqilin1@163.com
2022-05-04powerpc/eeh: Remove unused inline function eeh_dev_phb_init_dynamic()YueHaibing1-2/+0
commit 475028efc708 ("powerpc/eeh: Remove eeh_dev_phb_init_dynamic()") left behind this, so can remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210324140714.19612-1-yuehaibing@huawei.com
2022-05-04powerpc/time: Fix sparse warningsHe Ying3-7/+5
We found these warnings in arch/powerpc/kernel/time.c as follows: warning: symbol 'decrementer_max' was not declared. Should it be static? warning: symbol 'rtc_lock' was not declared. Should it be static? warning: symbol 'dtl_consumer' was not declared. Should it be static? Declare 'decrementer_max' in powerpc asm/time.h. Include linux/mc146818rtc.h in powerpc kernel/time.c where 'rtc_lock' is declared. And remove duplicated declaration of 'rtc_lock' in powerpc platforms/chrp/time.c because it has included linux/mc146818rtc.h. Move 'dtl_consumer' definition after "include <asm/dtl.h>" because it is declared there. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: He Ying <heying24@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210324090939.143477-1-heying24@huawei.com
2022-05-02powerpc/sstep: Use bitwise instead of arithmetic operator for flagsYang Li1-3/+3
Fix the following coccinelle warnings: ./arch/powerpc/lib/sstep.c:1090:20-21: WARNING: sum of probable bitmasks, consider | ./arch/powerpc/lib/sstep.c:1115:20-21: WARNING: sum of probable bitmasks, consider | ./arch/powerpc/lib/sstep.c:1134:20-21: WARNING: sum of probable bitmasks, consider | Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1613811455-2457-1-git-send-email-yang.lee@linux.alibaba.com
2022-05-02powerpc/8xx: export 'cpm_setbrg' for modulesRandy Dunlap1-0/+1
Fix missing export for a loadable module build: ERROR: modpost: "cpm_setbrg" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> [chleroy: Changed Fixes: tag] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210122010819.30986-1-rdunlap@infradead.org
2022-05-02powerpc/perf: Fix symbol undeclared warningWang Wensheng1-2/+2
Build kernel with `C=2`: arch/powerpc/perf/isa207-common.c:24:18: warning: symbol 'isa207_pmu_format_attr' was not declared. Should it be static? arch/powerpc/perf/power9-pmu.c:101:5: warning: symbol 'p9_dd21_bl_ev' was not declared. Should it be static? arch/powerpc/perf/power9-pmu.c:115:5: warning: symbol 'p9_dd22_bl_ev' was not declared. Should it be static? Those symbols are used only in the files that define them so we declare them as static to fix the warnings. Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200923071453.2540-1-wangwensheng4@huawei.com
2022-05-02powerpc/pseries/dlpar: Remove unnecessary cast to kfree()Xu Wang1-1/+1
Remove unnecassary cast in the argument to kfree(). Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200708072228.30776-1-vulab@iscas.ac.cn
2022-04-29net: unexport csum_and_copy_{from,to}_userChristoph Hellwig1-2/+0
csum_and_copy_from_user and csum_and_copy_to_user are exported by a few architectures, but not actually used in modular code. Drop the exports. Link: https://lkml.kernel.org/r/20220421070440.1282704-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29vmcore: convert copy_oldmem_page() to take an iov_iterMatthew Wilcox (Oracle)1-30/+5
Patch series "Convert vmcore to use an iov_iter", v5. For some reason several people have been sending bad patches to fix compiler warnings in vmcore recently. Here's how it should be done. Compile-tested only on x86. As noted in the first patch, s390 should take this conversion a bit further, but I'm not inclined to do that work myself. This patch (of 3): Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter. s390 needs more work to pass the iov_iter down further, or refactor, but I'd be more comfortable if someone who can test on s390 did that work. It's more convenient to convert the whole of read_from_oldmem() to take an iov_iter at the same time, so rename it to read_from_oldmem_iter() and add a temporary read_from_oldmem() wrapper that creates an iov_iter. Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.