aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ppc/kernel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2005-10-27[PATCH] powerpc: Fix handling of fpscr on 64-bitDavid Gibson4-31/+4
The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22powerpc: Move agp_special_page export to where it is definedPaul Mackerras1-4/+0
... instead of exporting it in arch/*/kernel/ppc_ksyms.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21[PATCH] powerpc: Merge thread_info.hDavid Gibson2-6/+5
Merge ppc32 and ppc64 versions of thread_info.h. They were pretty similar already, the chief changes are: - Instead of inline asm to implement current_thread_info(), which needs to be different for ppc32 and ppc64, we use C with an asm("r1") register variable. gcc turns it into the same asm as we used to have for both platforms. - We replace ppc32's 'local_flags' with the ppc64 'syscall_noerror' field. The noerror flag was in fact the only thing in the local_flags field anyway, so the ppc64 approach is simpler, and means we only need a load-immediate/store instead of load/mask/store when clearing the flag. - In readiness for 64k pages, when THREAD_SIZE will be less than a page, ppc64 used kmalloc() rather than get_free_pages() to allocate the kernel stack. With this patch we do the same for ppc32, since there's no strong reason not to. - For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE via asm-offsets, thread_info.h can now be safely included in asm, as on ppc32. Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and Power5 (ARCH=ppc64 and ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc/ppc/ppc64: Various compile fixes.Paul Mackerras1-1/+1
This declares powersave_nap in system.h and makes it an int everywhere, fixes typos for the maple platform, fixes a couple of places where I missed removing the last two arguments from a message_pass function, and makes ppc64 consistent with ppc32 in the type of the pci_bridge.cfg_data field. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc: rename pci_assign_all_busses to pci_assign_all_busesPaul Mackerras1-5/+5
... for consistency with ppc64 and to make merging easier. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]David Gibson4-100/+4
This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] ppc32: replace use of _GLOBAL with .globl for ppc32Kumar Gala3-18/+33
The _GLOBAL() macro is for text symbols only. Changed to using .globl for .data symbols. This is also needed in ppc32 land to allow FSL Book-E, 40x, and 44x to work. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge time.c and asm/time.h.Paul Mackerras2-1/+10
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19ppc: Minor smp changes for consistency with ppc64Paul Mackerras1-12/+8
This makes platform code use the smp_ops variable directly instead of ppc_md.smp_ops, removes the two unused `data' and `wait' arguments from the *_message_pass() functions, and removes the call to the never-implemented smp_ops->space_timers() function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpcPaul Mackerras1-1/+1
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc), and consolidates the sys_fadvise64_64 implementations for 32-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18powerpc: merge ppc signal.c and ppc64 signal32.cStephen Rothwell2-773/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17ppc: Fix various compile errors resulting from ptrace.c mergePaul Mackerras2-37/+98
This introduces flush_{fp,altivec,spe}_to_thread and fixes a branch-too-far error in linking. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17powerpc: Merge syscalls.c and sys_ppc32.c.Paul Mackerras2-270/+1
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTESStephen Rothwell5-35/+35
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13powerpc: merge ptrace.cStephen Rothwell2-509/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13powerpc: consolidate cputable.cStephen Rothwell2-808/+2
Also simplify arch/ppc64/kernel/Makefile Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12Merge from Linus' treePaul Mackerras1-2/+2
2005-10-11[PATCH] ppc highmem fixPaolo Galtieri1-2/+2
I've noticed that the calculations for seg_size and nr_segs in __dma_sync_page_highmem() (arch/ppc/kernel/dma-mapping.c) are wrong. The incorrect calculations can result in either an oops or a panic when running fsck depending on the size of the partition. The problem with the seg_size calculation is that it can result in a negative number if size is offset > size. The problem with the nr_segs caculation is returns the wrong number of segments, e.g. it returns 1 when size is 200 and offset is 4095, when it should return 2 or more. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11ppc: Various minor compile fixesPaul Mackerras7-10/+33
This fixes up a variety of minor problems in compiling with ARCH=ppc arising from using the merged versions of various header files. A lot of the changes are just adding #include <asm/machdep.h> to files that use ppc_md or smp_ops_t. This also arranges for us to use semaphore.c, vecemu.c, vector.S and fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11ppc: Adapt to asm-powerpc/irq.h irq_canonicalize changesPaul Mackerras1-0/+5
Now instead of having a ppc_md function, we just have a variable which says whether to do the i8259 irq canonicalization or not, and set that variable on the platforms that need that. It looks to me that radstone_ppc7d was trying to use irq canonicalization for something else in a broken kind of way - it will need to be fixed properly. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Fix compilation for 32-bit configsPaul Mackerras1-4/+2
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Make some #includes explicit.Paul Mackerras3-0/+3
In preparation for merging processor.h, this adds some explicit but won't be after the merge. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06powerpc: Fix idle.c compile warningPaul Mackerras1-0/+1
This fixes a compile warning when using arch/ppc/kernel/idle.c in a merged (ARCH=powerpc) kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-04ppc32: remove obsolete klock_info definitionPaul Mackerras1-1/+0
klock_info isn't used or referenced anywhere else in the kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-04ppc32: export a few more things where they are definedPaul Mackerras2-3/+3
... and remove the exports from ppc_ksyms.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-01powerpc: merge idle_power4.S and trapc.sStephen Rothwell8-128/+128
Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30powerpc: more cleanup of powerpc/kernelStephen Rothwell2-133/+1
Update head_64.S from arch/ppc64 Remove arc/ppc/kernel/fpu.S Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30powerpc: remove old vector.S filesStephen Rothwell2-217/+1
Update old kernel/Makefiles to cope Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-29Merge by hand from Linus' tree.Paul Mackerras1-2/+1
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28[PATCH] ppc: fix stupid thinko in oprofile fixBenjamin Herrenschmidt1-2/+1
I did something stupid in my oprofile fix, here's the obvious fix: Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28powerpc: Fixes to get the merged kernel to boot on powermac.Paul Mackerras1-1/+1
This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28[PATCH] ppc32: make cur_cpu_spec a single pointer instead of an arrayKumar Gala6-49/+30
Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs. Additionally, made call_setup_cpu check to see if the cpu_setup pointer is NULL or not before calling the function. This lets remove the dummy cpu_setup calls that just return. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28[PATCH] powerpc: merged asm/cputable.hKumar Gala1-313/+86
Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26powerpc: Merge enough to start building in arch/powerpc.Paul Mackerras2-0/+29
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-25Merge from Linus' tree.Paul Mackerras2-3/+6
2005-09-22[PATCH] ppc32: fix build with oprofileBenjamin Herrenschmidt2-3/+6
Current -git tree doesn't build when enabling oprofile on a non-bookE CPU (like on a PowerMac for example). While there is no performance counter support for these CPUs implemented yet, it's still nice to be able to use the timer based sampling, and that got broken. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22[PATCH] powerpc: Merge asm-ppc*/dma.hJon Loeliger1-1/+2
This merges the asm-ppc*/dma.h files. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21[PATCH] powerpc: Merge bug.hBecky Bruce1-1/+1
ppc32/ppc64: Merge bug.h into include/asm-powerpc This patch merges bug.h into include/asm-powerpc. Changed the data structure for bug_entry such that line is always an int on both 32 and 64-bit platforms; removed casts to int from the 64-bit trap code to reflect this. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21[PATCH] powerpc: reduce oprofile/common.c differencesStephen Rothwell1-5/+5
Rename and slightly modify {request,free}_perfmon_irq in the ppc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21[PATCH] powerpc: Move arch/ppc*/kernel/vecemu.c to arch/powerpcStephen Rothwell2-345/+2
This file is the same in both architectures so create arch/powerpc/kernel and move it there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19[PATCH] powerpc: Remove section free() and linker script bitsJon Loeliger1-26/+0
Here is a new patch that removes all notion of the pmac, prep, chrp and openfirmware initialization sections, and then unifies the sections.h files without those __pmac, etc, sections identifiers cluttering things up. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19[PATCH] powerpc: Remove sections use from ppcJon Loeliger2-6/+6
Here is a new patch that removes all notion of the pmac, prep, chrp and openfirmware initialization sections, and then unifies the sections.h files without those __pmac, etc, sections identifiers cluttering things up. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19[PATCH] ppc32: Removed non-inlined versions of local_irq* functionsKumar Gala2-138/+0
We always use the inlined versions of local_irq_enable, local_irq_disable, local_save_flags_ptr, and local_irq_restore on ppc32 so the non-inlined versions where just taking up space. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-19[PATCH] powerpc: Merged ppc_asm.hKumar Gala2-6/+6
Merged ppc_asm.h between ppc32 & ppc64. The majority of the file is common between the two architectures excluding how a single GPR is saved/restored and which GPRs are non-volatile. Additionally, moved the ASM_CONST macro used on ppc64 into ppc_asm.h. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-13[PATCH] ppc32: remove use of asm/segment.hKumar Gala2-2/+0
Removed ppc32 architecture specific users of asm/segment.h and asm-ppc/segment.h itself Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13[PATCH] ppc32: discard *.exit.text and *.exit.data sectionsTom Rini1-0/+4
Discard *.exit.text sections on runtime. We cannot do this on link time because of the way BUG macros are implemented. If "__exit function" calls one of those macros, __bug_table section will reference this function. This is similar to ".altinstructions" situation on i386. *.exit.data seems to be OK in this respect and is discarded on link time. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Tom Rini <trini@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] ppc32: support hotplug cpu on powermacsPaul Mackerras3-30/+48
This allows cpus to be off-lined on 32-bit SMP powermacs. When a cpu is off-lined, it is put into sleep mode with interrupts disabled. It can be on-lined again by asserting its soft-reset pin, which is connected to a GPIO pin. With this I can off-line the second cpu in my dual G4 powermac, which means that I can then suspend the machine (the suspend/resume code refuses to suspend if more than one cpu is online, and making it cope with multiple cpus is surprisingly messy). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] ppc32: Kill init on unhandled synchronous signalsPaul Mackerras1-0/+22
This is a patch that I have had in my tree for ages. If init causes an exception that raises a signal, such as a SIGSEGV, SIGILL or SIGFPE, and it hasn't registered a handler for it, we don't deliver the signal, since init doesn't get any signals that it doesn't have a handler for. But that means that we just return to userland and generate the same exception again immediately. With this patch we print a message and kill init in this situation. This is very useful when you have a bug in the kernel that means that init doesn't get as far as executing its first instruction. :) Without this patch the system hangs when it gets to starting the userland init; with it you at least get a message giving you a clue about what has gone wrong. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] merge some from Rusty's trivial patchesAdrian Bunk3-3/+1
This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild Linus Torvalds13-13/+13
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.