aboutsummaryrefslogtreecommitdiffstats
path: root/arch/riscv/include (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-18riscv: set pmp configuration if kernel is running in M-modeGreentime Hu1-0/+12
When the kernel is running in S-mode, the expectation is that the bootloader or SBI layer will configure the PMP to allow the kernel to access physical memory. But, when the kernel is running in M-mode and is started with the ELF "loader", there's probably no bootloader or SBI layer involved to configure the PMP. Thus, we need to configure the PMP ourselves to enable the kernel to access all regions. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+0
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04asm-generic: Make dma-contiguous.h a mandatory include/asm headerMichal Simek1-1/+0
dma-continuguous.h is generic for all architectures except arm32 which has its own version. Similar change was done for msi.h by commit a1b39bae16a6 ("asm-generic: Make msi.h a mandatory include/asm header") Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
2020-02-04riscv: mm: add p?d_leaf() definitionsSteven Price2-0/+14
walk_page_range() is going to be allowed to walk page tables other than those of user space. For this it needs to know when it has reached a 'leaf' entry in the page tables. This information is provided by the p?d_leaf() functions/macros. For riscv a page is a leaf page when it has a read, write or execute bit set on it. Link: http://lkml.kernel.org/r/20191218162402.45610-8-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Zong Li <zong.li@sifive.com> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv] Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds4-2/+55
Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of patches for this merge window: - Support for kasan - 32-bit physical addresses on rv32i-based systems - Support for CONFIG_DEBUG_VIRTUAL - DT entry for the FU540 GPIO controller, which has recently had a device driver merged These boot a buildroot-based system on QEMU's virt board for me" * tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: Add DT support for SiFive FU540 GPIO driver riscv: mm: add support for CONFIG_DEBUG_VIRTUAL riscv: keep 32-bit kernel to 32-bit phys_addr_t kasan: Add riscv to KASAN documentation. riscv: Add KASAN support kasan: No KASAN's memmove check if archs don't have it.
2020-01-29Merge tag 'docs-5.6' of git://git.lwn.net/linuxLinus Torvalds1-2/+2
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle for documentation, but there's still a couple of things of note: - Conversion of the NFS documentation to RST - A new document on how to help with documentation (and a maintainer profile entry too) Plus the usual collection of typo fixes, etc" * tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits) docs: filesystems: add overlayfs to index.rst docs: usb: remove some broken references scripts/find-unused-docs: Fix massive false positives docs: nvdimm: use ReST notation for subsection zram: correct documentation about sysfs node of huge page writeback Documentation: zram: various fixes in zram.rst Add a maintainer entry profile for documentation Add a document on how to contribute to the documentation docs: Keep up with the location of NoUri Documentation: Call out example SYM_FUNC_* usage as x86-specific Documentation: nfs: fault_injection: convert to ReST Documentation: nfs: pnfs-scsi-server: convert to ReST Documentation: nfs: convert pnfs-block-server to ReST Documentation: nfs: idmapper: convert to ReST Documentation: convert nfsd-admin-interfaces to ReST Documentation: nfs-rdma: convert to ReST Documentation: nfsroot.rst: COSMETIC: refill a paragraph Documentation: nfsroot.txt: convert to ReST Documentation: convert nfs.txt to ReST Documentation: filesystems: convert vfat.txt to RST ...
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds3-0/+17
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-23riscv: mm: add support for CONFIG_DEBUG_VIRTUALZong Li1-2/+14
This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping check, and __pa_symbol used for kernel symbol check. In current RISC-V, kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is disable, these two functions calculate the offset on the address feded directly without any checks. The result of test_debug_virtual as follows: [ 0.358456] ------------[ cut here ]------------ [ 0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000) [ 0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50 [ 0.359409] Modules linked in: [ 0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57 [ 0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0 [ 0.360019] gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660 [ 0.360175] t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0 [ 0.360330] s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000 [ 0.360492] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358 [ 0.360672] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.360876] s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0 [ 0.361067] s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008 [ 0.361267] s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630 [ 0.361453] s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0 [ 0.361636] t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e [ 0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.362056] ---[ end trace aec0bf78d4978122 ]--- [ 0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000 [ 0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0 Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22riscv: Add KASAN supportNick Hu3-0/+41
This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu <nickhu@andestech.com> Reported-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-20Merge tag 'v5.5-rc7' into efi/core, to pick up fixesIngo Molnar2-16/+4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-16/+4
2020-01-18riscv: Less inefficient gcc tishift helpers (and export their symbols)Olof Johansson1-0/+4
The existing __lshrti3 was really inefficient, and the other two helpers are also needed to compile some modules. Add the missing versions, and export all of the symbols like arm64 already does. This code is based on the assembly generated by libgcc builds. This fixes a build break triggered by ubsan: riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2': ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3' riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3' Signed-off-by: Olof Johansson <olof@lixom.net> [paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of ENTRY/ENDPROC; note libgcc origin] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah1-16/+0
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-10Merge branch 'x86/mm' into efi/core, to pick up dependenciesIngo Molnar1-0/+4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-9/+9
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-04riscv: prefix IRQ_ macro names with an RV_ namespacePaul Walmsley1-9/+9
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-0/+17
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20riscv: define vmemmap before pfn_to_page callsDavid Abdurachmanov1-17/+21
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused by NOMMU changes which moved vmemmap definition bellow functions definitions calling pfn_to_page & page_to_pfn. Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV. v2: - Add a comment for vmemmap in source Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 6bd33e1ece52 ("riscv: add nommu support") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-19RISC-V: Typo fixes in image header and documentation.Atish Patra1-2/+2
There are some typos in boot image header and riscv boot documentation. Fix the typos. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20191009010637.9955-1-atish.patra@wdc.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-12-19riscv, perf: Add arch specific perf_arch_bpf_user_pt_regsBjörn Töpel1-0/+4
RISC-V was missing a proper perf_arch_bpf_user_pt_regs macro for CONFIG_PERF_EVENT builds. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-10-bjorn.topel@gmail.com
2019-12-19riscv, bpf: Add missing uapi header for BPF_PROG_TYPE_PERF_EVENT programsBjörn Töpel1-0/+9
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by exporting struct user_regs_struct instead of struct pt_regs which is in-kernel only. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
2019-12-19riscv, bpf: Provide RISC-V specific JIT image alloc/freeBjörn Töpel1-0/+4
This commit makes sure that the JIT images is kept close to the kernel text, so BPF calls can use relative calling with auipc/jalr or jal instead of loading the full 64-bit address and jalr. The BPF JIT image region is 128 MB before the kernel text. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-7-bjorn.topel@gmail.com
2019-12-10mm/vmalloc: Add empty <asm/vmalloc.h> headers and use them from <linux/vmalloc.h>Ingo Molnar1-0/+4
In the x86 MM code we'd like to untangle various types of historic header dependency spaghetti, but for this we'd need to pass to the generic vmalloc code various vmalloc related defines that customarily come via the <asm/page.h> low level arch header. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-03Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+0
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-28Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2-14/+7
Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ...
2019-11-26asm-generic: Make msi.h a mandatory include/asm headerMichal Simek1-1/+0
msi.h is generic for all architectures except x86, which has its own version. Enabling MSI by adding msi.h to every architecture's Kbuild is just an additional step which doesn't need to be done. Make msi.h mandatory in the asm-generic/Kbuild so we don't have to do it for each architecture. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/c991669e29a79b1a8e28c3b4b3a125801a693de8.1571983829.git.michal.simek@xilinx.com Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # build only, rv32/rv64 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
2019-11-22Merge branch 'next/nommu' into for-nextPaul Walmsley20-226/+417
Conflicts: arch/riscv/boot/Makefile arch/riscv/include/asm/sbi.h
2019-11-22Merge branch 'next/misc' into for-nextPaul Walmsley15-33/+40
2019-11-17riscv: add nommu supportChristoph Hellwig12-49/+102
The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware. Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation: - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack. In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line: qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards around PCI_IOBASE definition to fix build issues; fixed checkpatch issues; move the PCI_IO_* and VMEMMAP address space macros along with the others; resolve sparse warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-17riscv: clear the instruction cache and all registers when bootingChristoph Hellwig1-0/+1
When we get booted we want a clear slate without any leaks from previous supervisors or the firmware. Flush the instruction cache and then clear all registers to known good values. This is really important for the upcoming nommu support that runs on M-mode, but can't really harm when running in S-mode either. Vaguely based on the concepts from opensbi. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-17riscv: read the hart ID from mhartid on bootDamien Le Moal1-0/+1
When in M-Mode, we can use the mhartid CSR to get the ID of the running HART. Doing so, direct M-Mode boot without firmware is possible. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-17riscv: provide native clint access for M-modeChristoph Hellwig2-0/+41
RISC-V has the concept of a cpu level interrupt controller. The interface for it is split between a standardized part that is exposed as bits in the mstatus/sstatus register and the mie/mip/sie/sip CRS. But the bit to actually trigger IPIs is not standardized and just mentioned as implementable using MMIO. Add support for IPIs using MMIO using the SiFive clint layout (which is also shared by Ariane, Kendryte and the Qemu virt platform). Additionally the MMIO block also supports the time value and timer compare registers, so they are also set up using the same OF node. Support for other layouts should also be relatively easy to add in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: update include guard format; fix checkpatch issues; minor commit message cleanup] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-13riscv: add support for MMIO access to the timer registersChristoph Hellwig2-3/+19
When running in M-mode we can't use the SBI to set the timer, and don't have access to the time CSR as that usually is emulated by M-mode. Instead provide code that directly accesses the MMIO for the timer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource [paul.walmsley@sifive.com: updated to apply; fixed checkpatch issue; timex.h now includes asm/mmio.h to resolve header file problems] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-13riscv: implement remote sfence.i using IPIsChristoph Hellwig1-0/+3
The RISC-V ISA only supports flushing the instruction cache for the local CPU core. Currently we always offload the remote TLB flushing to the SBI, which then issues an IPI under the hoods. But with M-mode we do not have an SBI so we have to do it ourselves. IPI to the other nodes using the existing kernel helpers instead if we have native clint support and thus can IPI directly from the kernel. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: cleaned up code comment] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-13riscv: poison SBI calls for M-modeChristoph Hellwig1-2/+3
There is no SBI when we run in M-mode, so fail the compile for any code trying to use SBI calls. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-12riscv: clean up the macro format in each header fileZong Li15-33/+40
There are many different formats in each header now, such as _ASM_XXX_H, __ASM_XXX_H, _ASM_RISCV_XXX_H, RISCV_XXX_H, etc., This patch tries to unify the format by using _ASM_RISCV_XXX_H, because the most header use it now. This patch also adds the conditional to the headers if they lost it. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-11riscv: use the generic ioremap codeChristoph Hellwig2-3/+6
Use the generic ioremap code instead of providing a local version. Note that this relies on the asm-generic no-op definition of pgprot_noncached. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # rv32, rv64 boot Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
2019-11-11arch: rely on asm-generic/io.h for default ioremap_* definitionsChristoph Hellwig1-10/+0
Various architectures that use asm-generic/io.h still defined their own default versions of ioremap_nocache, ioremap_wt and ioremap_wc that point back to plain ioremap directly or indirectly. Remove these definitions and rely on asm-generic/io.h instead. For this to work the backup ioremap_* defintions needs to be changed to purely cpp macros instea of inlines to cover for architectures like openrisc that only define ioremap after including <asm-generic/io.h>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
2019-11-05riscv: abstract out CSR names for supervisor vs machine modeChristoph Hellwig5-30/+82
Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com> and Paul Walmsley <paul.walmsley@sifive.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-05riscv: separate MMIO functions into their own header filePaul Walmsley2-144/+167
Separate the low-level MMIO static inline functions and macros, such as {read,write}{b,w,l,q}(), into their own header file under arch/riscv/include: asm/mmio.h. This is done to break a header dependency chain that arises when both asm/pgtable.h and asm/io.h are included by asm/timex.h. Since the problem is related to the legacy I/O port support in asm/io.h, this allows files under arch/riscv that encounter those issues to simply include asm/mmio.h instead, and bypass the legacy I/O port functions. Existing users of asm/io.h don't need to change anything, since asm/mmio.h is included by asm/io.h. While here, clean up some checkpatch.pl-related issues with the original code. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-29riscv: add support for SECCOMP and SECCOMP_FILTERDavid Abdurachmanov2-1/+14
This patch was extensively tested on Fedora/RISCV (applied by default on top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc on QEMU and SiFive Unleashed board. libseccomp (userspace) was rebased: https://github.com/seccomp/libseccomp/pull/134 Fully passes libseccomp regression testing (simulation and live). There is one failing kernel selftest: global.user_notification_signal v1 -> v2: - return immediately if secure_computing(NULL) returns -1 - fixed whitespace issues - add missing seccomp.h - remove patch #2 (solved now) - add riscv to seccomp kernel selftest Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Cc: keescook@chromium.org Cc: me@carlosedp.com Tested-by: Carlos de Paula <me@carlosedp.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/linux-riscv/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Link: https://lore.kernel.org/linux-riscv/CAJr-aD=UnCN9E_mdVJ2H5nt=6juRSWikZnA5HxDLQxXLbsRz-w@mail.gmail.com/ [paul.walmsley@sifive.com: cleaned up Cc: lines; fixed spelling and checkpatch issues; updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-28RISC-V: Add PCIe I/O BAR memory mappingYash Shah2-1/+13
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux, we need to establish a reserved memory region for them, so that drivers that wish to use the legacy I/O BARs can issue reads and writes against a memory region that is mapped to the host PCIe controller's I/O BAR mapping. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-28riscv: add missing header file includesPaul Walmsley2-0/+4
sparse identifies several missing prototypes caused by missing preprocessor include directives: arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static? arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static? arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static? arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static? arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static? arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static? arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static? arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static? arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static? Fix by including the appropriate header files in the appropriate source files. This patch should have no functional impact. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-10-23riscv: cleanup <asm/bug.h>Christoph Hellwig1-13/+3
Remove various not required ifdefs and externs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23riscv: Fix implicit declaration of 'page_to_section'Kefeng Wang1-4/+1
With CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP, arch/riscv/include/asm/pgtable.h: In function ‘mk_pte’: include/asm-generic/memory_model.h:64:14: error: implicit declaration of function ‘page_to_section’; did you mean ‘present_section’? [-Werror=implicit-function-declaration] int __sec = page_to_section(__pg); \ ^~~~~~~~~~~~~~~ Fixed by changing mk_pte() from inline function to macro. Cc: Logan Gunthorpe <logang@deltatee.com> Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [paul.walmsley@sifive.com: fixed checkpatch errors] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-23riscv: fix fs/proc/kcore.c compilation with sparsemem enabledDavid Abdurachmanov1-2/+0
Failed to compile Fedora/RISCV kernel (5.4-rc3+) with sparsemem enabled: fs/proc/kcore.c: In function 'read_kcore': fs/proc/kcore.c:510:8: error: implicit declaration of function 'kern_addr_valid'; did you mean 'virt_addr_valid'? [-Werror=implicit-function-declaration] 510 | if (kern_addr_valid(start)) { | ^~~~~~~~~~~~~~~ | virt_addr_valid Looking at other architectures I don't see kern_addr_valid being guarded by CONFIG_FLATMEM. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-15RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_STARTGreentime Hu1-8/+8
This patch fixes the virtual address layout in pgtable.h. The virtual address of FIXADDR_START and VMEMMAP_START should not be overlapped. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: fixed patch description] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-14riscv: tlbflush: remove confusing comment on local_flush_tlb_all()Paul Walmsley1-4/+0
Remove a confusing comment on our local_flush_tlb_all() implementation. Per an internal discussion with Andrew, while it's true that the fence.i is not necessary, it's not the case that an sfence.vma implies a fence.i. We also drop the section about "flush[ing] the entire local TLB" to better align with the language in section 4.2.1 "Supervisor Memory-Management Fence Instruction" of the RISC-V Privileged Specification v20190608. Fixes: c901e45a999a1 ("RISC-V: `sfence.vma` orderes the instruction cache") Reported-by: Alan Kao <alankao@andestech.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Andrew Waterman <andrew@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-01RISC-V: Clear load reservations while restoring hart contextsPalmer Dabbelt1-0/+1
This is almost entirely a comment. The bug is unlikely to manifest on existing hardware because there is a timeout on load reservations, but manifests on QEMU because there is no timeout. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-27Merge tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds1-12/+12
Pull more RISC-V updates from Paul Walmsley: "Some additional RISC-V updates. This includes one significant fix: - Prevent interrupts from being unconditionally re-enabled during exception handling if they were disabled in the context in which the exception occurred Also a few other fixes: - Fix a build error when sparse memory support is manually enabled - Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot And a few minor improvements: - DT improvements: in the FU540 SoC DT files, improve U-Boot compatibility by adding an "ethernet0" alias, drop an unnecessary property from the DT files, and add support for the PWM device - KVM preparation: add a KVM-related macro for future RISC-V KVM support, and export some symbols required to build KVM support as modules - defconfig additions: build more drivers by default for QEMU configurations" * tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Avoid interrupts being erroneously enabled in handle_exception() riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes riscv: dts: sifive: Add ethernet0 to the aliases node RISC-V: Export kernel symbols for kvm KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface arch/riscv: disable excess harts before picking main boot hart RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y riscv: dts: Add DT support for SiFive FU540 PWM driver
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.