aboutsummaryrefslogtreecommitdiffstats
path: root/arch/riscv (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24riscv: adjust the indentZong Li1-11/+15
Adjust the indent to match Linux coding style. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-24riscv: allocate a complete page size for each page tableZong Li1-11/+16
Each page table should be created by allocating a complete page size for it. Otherwise, the content of the page table would be corrupted somewhere through memory allocation which allocates the memory at the middle of the page table for other use. Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-19riscv: Fix gitignoreDamien Le Moal1-0/+2
Tell git to not track the compiled boot/loader and boot/loader.lds files. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-18RISC-V: Don't enable all interrupts in trap_init()Anup Patel1-2/+2
Historically, we have been enabling all interrupts for each HART in trap_init(). Ideally, we should only enable M-mode interrupts for M-mode kernel and S-mode interrupts for S-mode kernel in trap_init(). Currently, we get suprious S-mode interrupts on Kendryte K210 board running M-mode NO-MMU kernel because we are enabling all interrupts in trap_init(). To fix this, we only enable software and external interrupt in trap_init(). In future, trap_init() will only enable software interrupt and PLIC driver will enable external interrupt using CPU notifiers. Fixes: a4c3733d32a7 ("riscv: abstract out CSR names for supervisor vs machine mode") Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Tested-by: Palmer Dabbelt <palmerdabbelt@google.com> [QMEU virt machine with SMP] [Palmer: Move the Fixes up to a newer commit] Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-18riscv: set pmp configuration if kernel is running in M-modeGreentime Hu2-0/+18
When the kernel is running in S-mode, the expectation is that the bootloader or SBI layer will configure the PMP to allow the kernel to access physical memory. But, when the kernel is running in M-mode and is started with the ELF "loader", there's probably no bootloader or SBI layer involved to configure the PMP. Thus, we need to configure the PMP ourselves to enable the kernel to access all regions. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+0
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04asm-generic: Make dma-contiguous.h a mandatory include/asm headerMichal Simek1-1/+0
dma-continuguous.h is generic for all architectures except arm32 which has its own version. Similar change was done for msi.h by commit a1b39bae16a6 ("asm-generic: Make msi.h a mandatory include/asm header") Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
2020-02-04riscv: mm: add p?d_leaf() definitionsSteven Price2-0/+14
walk_page_range() is going to be allowed to walk page tables other than those of user space. For this it needs to know when it has reached a 'leaf' entry in the page tables. This information is provided by the p?d_leaf() functions/macros. For riscv a page is a leaf page when it has a read, write or execute bit set on it. Link: http://lkml.kernel.org/r/20191218162402.45610-8-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Alexandre Ghiti <alex@ghiti.fr> Reviewed-by: Zong Li <zong.li@sifive.com> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv] Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds16-9/+241
Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of patches for this merge window: - Support for kasan - 32-bit physical addresses on rv32i-based systems - Support for CONFIG_DEBUG_VIRTUAL - DT entry for the FU540 GPIO controller, which has recently had a device driver merged These boot a buildroot-based system on QEMU's virt board for me" * tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: Add DT support for SiFive FU540 GPIO driver riscv: mm: add support for CONFIG_DEBUG_VIRTUAL riscv: keep 32-bit kernel to 32-bit phys_addr_t kasan: Add riscv to KASAN documentation. riscv: Add KASAN support kasan: No KASAN's memmove check if archs don't have it.
2020-01-29Merge tag 'docs-5.6' of git://git.lwn.net/linuxLinus Torvalds1-2/+2
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle for documentation, but there's still a couple of things of note: - Conversion of the NFS documentation to RST - A new document on how to help with documentation (and a maintainer profile entry too) Plus the usual collection of typo fixes, etc" * tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits) docs: filesystems: add overlayfs to index.rst docs: usb: remove some broken references scripts/find-unused-docs: Fix massive false positives docs: nvdimm: use ReST notation for subsection zram: correct documentation about sysfs node of huge page writeback Documentation: zram: various fixes in zram.rst Add a maintainer entry profile for documentation Add a document on how to contribute to the documentation docs: Keep up with the location of NoUri Documentation: Call out example SYM_FUNC_* usage as x86-specific Documentation: nfs: fault_injection: convert to ReST Documentation: nfs: pnfs-scsi-server: convert to ReST Documentation: nfs: convert pnfs-block-server to ReST Documentation: nfs: idmapper: convert to ReST Documentation: convert nfsd-admin-interfaces to ReST Documentation: nfs-rdma: convert to ReST Documentation: nfsroot.rst: COSMETIC: refill a paragraph Documentation: nfsroot.txt: convert to ReST Documentation: convert nfs.txt to ReST Documentation: filesystems: convert vfat.txt to RST ...
2020-01-29Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-4/+0
Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-29riscv: dts: Add DT support for SiFive FU540 GPIO driverYash Shah2-1/+18
Add the gpio DT node in SiFive FU540 soc-specific DT file. Enable the gpio node in HiFive Unleashed board-specific DT file. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-238/+310
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-28Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+2
Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-23riscv: mm: add support for CONFIG_DEBUG_VIRTUALZong Li4-2/+54
This patch implements CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys and __pa_symbol calls. virt_to_phys used for linear mapping check, and __pa_symbol used for kernel symbol check. In current RISC-V, kernel image maps to linear mapping area. If CONFIG_DEBUG_VIRTUAL is disable, these two functions calculate the offset on the address feded directly without any checks. The result of test_debug_virtual as follows: [ 0.358456] ------------[ cut here ]------------ [ 0.358738] virt_to_phys used for non-linear address: (____ptrval____) (0xffffffd000000000) [ 0.359174] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:16 __virt_to_phys+0x3c/0x50 [ 0.359409] Modules linked in: [ 0.359630] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc3-00002-g5133c5c0ca13 #57 [ 0.359861] epc: ffffffe000253d1a ra : ffffffe000253d1a sp : ffffffe03aa87da0 [ 0.360019] gp : ffffffe000ae03b0 tp : ffffffe03aa88000 t0 : ffffffe000af2660 [ 0.360175] t1 : 0000000000000064 t2 : 00000000000000b7 s0 : ffffffe03aa87dc0 [ 0.360330] s1 : ffffffd000000000 a0 : 000000000000004f a1 : 0000000000000000 [ 0.360492] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffe000a84358 [ 0.360672] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.360876] s2 : ffffffe000ae0600 s3 : ffffffe00000fc7c s4 : ffffffe0000224b0 [ 0.361067] s5 : ffffffe000030890 s6 : ffffffe000022470 s7 : 0000000000000008 [ 0.361267] s8 : ffffffe0000002c4 s9 : ffffffe000ae0640 s10: ffffffe000ae0630 [ 0.361453] s11: 0000000000000000 t3 : 0000000000000000 t4 : 000000000001e6d0 [ 0.361636] t5 : ffffffe000ae0a18 t6 : ffffffe000aee54e [ 0.361806] status: 0000000000000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.362056] ---[ end trace aec0bf78d4978122 ]--- [ 0.362404] PA: 0xfffffff080200000 for VA: 0xffffffd000000000 [ 0.362607] PA: 0x00000000baddd2d0 for VA: 0xffffffe03abdd2d0 Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Tested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22riscv: keep 32-bit kernel to 32-bit phys_addr_tOlof Johansson1-2/+0
While rv32 technically has 34-bit physical addresses, no current platforms use it and it's likely to shake out driver bugs. Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up, since other work will be needed to make such a system useful anyway. PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22riscv: Add KASAN supportNick Hu12-4/+169
This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu <nickhu@andestech.com> Reported-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-20Merge tag 'v5.5-rc7' into efi/core, to pick up fixesIngo Molnar7-45/+78
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-45/+78
2020-01-18riscv: Less inefficient gcc tishift helpers (and export their symbols)Olof Johansson2-18/+61
The existing __lshrti3 was really inefficient, and the other two helpers are also needed to compile some modules. Add the missing versions, and export all of the symbols like arm64 already does. This code is based on the assembly generated by libgcc builds. This fixes a build break triggered by ubsan: riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2': ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3' riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3' Signed-off-by: Olof Johansson <olof@lixom.net> [paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of ENTRY/ENDPROC; note libgcc origin] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-18riscv: delete temporary filesIlie Halip1-1/+2
Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp. Delete them once they're no longer needed. Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-15riscv: make sure the cores stay looping in .Lsecondary_parkGreentime Hu1-6/+10
The code in secondary_park is currently placed in the .init section. The kernel reclaims and clears this code when it finishes booting. That causes the cores parked in it to go to somewhere unpredictable, so we move this function out of init to make sure the cores stay looping there. The instruction bgeu a0, t0, .Lsecondary_park may have "a relocation truncated to fit" issue during linking time. It is because that sections are too far to jump. Let's use tail to jump to the .Lsecondary_park. Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup.patel@sifive.com> Cc: Andreas Schwab <schwab@suse.de> Cc: stable@vger.kernel.org Fixes: 76d2a0493a17d ("RISC-V: Init and Halt Code") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-14arch/riscv/setup: Drop dummy_con initializationArvind Sankar1-4/+0
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset. Drop it from arch setup code. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20191218214506.49252-19-nivedita@alum.mit.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds2-17/+1
Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc
2020-01-12riscv: Fixup obvious bug for fp-regs resetGuo Ren1-1/+1
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <ren_guo@c-sky.com> [paul.walmsley@sifive.com: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah1-16/+0
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-10Merge branch 'x86/mm' into efi/core, to pick up dependenciesIngo Molnar1-0/+4
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller6-19/+35
The ungrafting from PRIO bug fixes in net, when merged into net-next, merge cleanly but create a build failure. The resolution used here is from Petr Machata. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-07riscv: Implement copy_thread_tlsAmanieu d'Antras2-3/+4
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-riscv@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-04riscv: prefix IRQ_ macro names with an RV_ namespacePaul Walmsley2-12/+12
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: ftrace: correct the condition logic in function graph tracerZong Li1-1/+1
The condition should be logical NOT to assign the hook address to parent address. Because the return value 0 of function_graph_enter upon success. Fixes: e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter()) Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: dts: Add DT support for SiFive L2 cache controllerYash Shah1-0/+15
Add the L2 cache controller DT node in SiFive FU540 soc-specific DT file Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: gcov: enable gcov for RISC-VZong Li1-0/+1
This patch enables GCOV code coverage measurement on RISC-V. Lightly tested on QEMU and Hifive Unleashed board, seems to work as expected. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: mm: use __pa_symbol for kernel symbolsZong Li1-6/+6
__pa_symbol is the marcro that should be used for kernel symbols. It is also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-3/+6
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27riscv: export flush_icache_all to modulesOlof Johansson1-0/+1
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: reject invalid syscalls below -1David Abdurachmanov1-0/+1
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: fix compile failure with EXPORT_SYMBOL() & !MMULuc Van Oostenryck2-3/+4
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by: kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller4-238/+310
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-12-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 127 non-merge commits during the last 17 day(s) which contain a total of 110 files changed, 6901 insertions(+), 2721 deletions(-). There are three merge conflicts. Conflicts and resolution looks as follows: 1) Merge conflict in net/bpf/test_run.c: There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro") which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in BPF_PROG_TEST_RUN"): <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) + sizeof_field(struct __sk_buff, priority), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c There are a few occasions that look similar to this. Always take the chunk with offsetofend(). Note that there is one where the fields differ in here: <<<<<<< HEAD if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) + sizeof_field(struct __sk_buff, tstamp), ======= if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs), >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to 850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN"). 2) Merge conflict in arch/riscv/net/bpf_jit_comp.c: (I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.) <<<<<<< HEAD if (is_13b_check(off, insn)) return -1; emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx); ======= emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx); >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Result should look like: emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx); 3) Merge conflict in arch/riscv/include/asm/pgtable.h: <<<<<<< HEAD ======= #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) #define vmemmap ((struct page *)VMEMMAP_START) >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c Only take the BPF_* defines from there and move them higher up in the same file. Remove the rest from the chunk. The VMALLOC_* etc defines got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page calls"). Result: [...] #define __S101 PAGE_READ_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC #define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) #define VMALLOC_END (PAGE_OFFSET - 1) #define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) #define BPF_JIT_REGION_SIZE (SZ_128M) #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE) #define BPF_JIT_REGION_END (VMALLOC_END) /* * Roughly size the vmemmap space to be large enough to fit enough * struct pages to map half the virtual address space. Then * position vmemmap directly below the VMALLOC region. */ #define VMEMMAP_SHIFT \ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT) #define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT) #define VMEMMAP_END (VMALLOC_START - 1) #define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE) [...] Let me know if there are any other issues. Anyway, the main changes are: 1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific to a provided BPF object file. This provides an alternative, simplified API compared to standard libbpf interaction. Also, add libbpf extern variable resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko. 2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also, add various BPF riscv JIT improvements, from Björn Töpel. 3) Extend bpftool to allow matching BPF programs and maps by name, from Paul Chaignon. 4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI flag for allowing updates without service interruption, from Andrey Ignatov. 5) Cleanup and simplification of ring access functions for AF_XDP with a bonus of 0-5% performance improvement, from Magnus Karlsson. 6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa. 7) Move and extend test_select_reuseport into BPF program tests under BPF selftests, from Jakub Sitnicki. 8) Various BPF sample improvements for xdpsock for customizing parameters to set up and benchmark AF_XDP, from Jay Jayatheerthan. 9) Improve libbpf to provide a ulimit hint on permission denied errors. Also change XDP sample programs to attach in driver mode by default, from Toke Høiland-Jørgensen. 10) Extend BPF test infrastructure to allow changing skb mark from tc BPF programs, from Nikita V. Shirokov. 11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King. 12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after libbpf conversion, from Jesper Dangaard Brouer. 13) Minor misc improvements from various others. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25Merge tag 'v5.5-rc3' into sched/core, to pick up fixesIngo Molnar11-209/+114
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-22Merge tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds5-198/+23
Pull RISC-V fixes from Paul Walmsley: "Several fixes, and one cleanup, for RISC-V. Fixes: - Fix an error in a Kconfig file that resulted in an undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix undefined Kconfig option "CONFIG_CONFIG_MMU" - Fix scratch register clearing in M-mode (affects nommu users) - Fix a mismerge on my part that broke the build for CONFIG_SPARSEMEM_VMEMMAP users Cleanup: - Move SiFive L2 cache-related code to drivers/soc, per request" * tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: move sifive_l2_cache.c to drivers/soc riscv: define vmemmap before pfn_to_page calls riscv: fix scratch register clearing in M-mode. riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-2/+2
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-20riscv: move sifive_l2_cache.c to drivers/socChristoph Hellwig2-179/+0
The sifive_l2_cache.c is in no way related to RISC-V architecture memory management. It is a little stub driver working around the fact that the EDAC maintainers prefer their drivers to be structured in a certain way that doesn't fit the SiFive SOCs. Move the file to drivers/soc and add a Kconfig option for it, as well as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE. Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Borislav Petkov <bp@suse.de> [paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: define vmemmap before pfn_to_page callsDavid Abdurachmanov1-17/+21
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused by NOMMU changes which moved vmemmap definition bellow functions definitions calling pfn_to_page & page_to_pfn. Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV. v2: - Add a comment for vmemmap in source Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Fixes: 6bd33e1ece52 ("riscv: add nommu support") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: fix scratch register clearing in M-mode.Greentime Hu1-1/+1
This patch fixes that the sscratch register clearing in M-mode. It cleared sscratch register in M-mode, but it should clear mscratch register. That will cause kernel trap if the CPU core doesn't support S-mode when trying to access sscratch. Fixes: 9e80635619b5 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-20riscv: Fix use of undefined config option CONFIG_CONFIG_MMUAndreas Schwab1-1/+1
In Kconfig files, config options are written without the CONFIG_ prefix. Fixes: 6bd33e1ece52 ("riscv: add nommu support") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-19RISC-V: Typo fixes in image header and documentation.Atish Patra1-2/+2
There are some typos in boot image header and riscv boot documentation. Fix the typos. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20191009010637.9955-1-atish.patra@wdc.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-12-19riscv, perf: Add arch specific perf_arch_bpf_user_pt_regsBjörn Töpel1-0/+4
RISC-V was missing a proper perf_arch_bpf_user_pt_regs macro for CONFIG_PERF_EVENT builds. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-10-bjorn.topel@gmail.com
2019-12-19riscv, bpf: Add missing uapi header for BPF_PROG_TYPE_PERF_EVENT programsBjörn Töpel1-0/+9
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by exporting struct user_regs_struct instead of struct pt_regs which is in-kernel only. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
2019-12-19riscv, bpf: Optimize callsBjörn Töpel1-37/+64
Instead of using emit_imm() and emit_jalr() which can expand to six instructions, start using jal or auipc+jalr. Signed-off-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191216091343.23260-8-bjorn.topel@gmail.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.