aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/include
AgeCommit message (Collapse)AuthorFilesLines
2020-03-10s390: prevent leaking kernel address in BEARSven Schnelle3-1/+11
When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-10s390/pci: embedding hotplug_slot in zdevPierre Morel1-0/+2
Embedding the hotplug_slot in zdev structure allows to greatly simplify the hotplug handling by eliminating the handling of the slot_list. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-06s390/mm: cleanup phys_to_pfn() and friendsAlexander Gordeev1-9/+9
Make page, frame, virtual and physical address conversion macros more expressive by avoiding redundant definitions and defining new macros using existing ones. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/mm: fix panic in gup_fast on large pudGerald Schaefer1-0/+6
On s390 there currently is no implementation of pud_write(). That was ok as long as we had our own implementation of get_user_pages_fast() which checked for pud protection by testing the bit directly w/o using pud_write(). The other callers of pud_write() are not reachable on s390. After commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") we use the generic get_user_pages_fast(), which does call pud_write() in pud_access_permitted() for FOLL_WRITE access on a large pud. Without an s390 specific pud_write(), the generic version is called, which contains a BUG() statement to remind us that we don't have a proper implementation. This results in a kernel panic. Fix this by providing an implementation of pud_write(). Cc: <stable@vger.kernel.org> # 5.2+ Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-27KVM: s390: protvirt: Add UV cpu reset callsJanosch Frank1-0/+6
For protected VMs, the VCPU resets are done by the Ultravisor, as KVM has no access to the VCPU registers. Note that the ultravisor will only accept a call for the exact reset that has been requested. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Support cmd 5 operation stateJanosch Frank1-0/+1
Code 5 for the set cpu state UV call tells the UV to load a PSW from the SE header (first IPL) or from guest location 0x0 (diag 308 subcode 0/1). Also it sets the cpu into operating state afterwards, so we can start it. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Report CPU state to UltravisorJanosch Frank1-0/+15
VCPU states have to be reported to the ultravisor for SIGP interpretation, kdump, kexec and reboot. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: UV calls in support of diag308 0, 1Janosch Frank1-0/+4
diag 308 subcode 0 and 1 require several KVM and Ultravisor interactions. Specific to these "soft" reboots are * The "unshare all" UVC * The "prepare for reset" UVC Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: handle secure guest prefix pagesJanosch Frank1-0/+1
The SPX instruction is handled by the ultravisor. We do get a notification intercept, though. Let us update our internal view. In addition to that, when the guest prefix page is not secure, an intercept 112 (0x70) is indicated. Let us make the prefix pages secure again. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: S390: protvirt: Introduce instruction data area bounce bufferJanosch Frank1-1/+10
Now that we can't access guest memory anymore, we have a dedicated satellite block that's a bounce buffer for instruction data. We re-use the memop interface to copy the instruction data to / from userspace. This lets us re-use a lot of QEMU code which used that interface to make logical guest memory accesses which are not possible anymore in protected mode anyway. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Add new gprs location handlingJanosch Frank1-1/+3
Guest registers for protected guests are stored at offset 0x380. We will copy those to the usual places. Long term we could refactor this or use register access functions. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Add SCLP interrupt handlingChristian Borntraeger1-1/+5
The sclp interrupt is kind of special. The ultravisor polices that we do not inject an sclp interrupt with payload if no sccb is outstanding. On the other hand we have "asynchronous" event interrupts, e.g. for console input. We separate both variants into sclp interrupt and sclp event interrupt. The sclp interrupt is masked until a previous servc instruction has finished (sie exit 108). [frankja@linux.ibm.com: factoring out write_sclp] Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Implement interrupt injectionMichael Mueller1-12/+50
This defines the necessary data structures in the SIE control block to inject machine checks,external and I/O interrupts. We first define the the interrupt injection control, which defines the next interrupt to inject. Then we define the fields that contain the payload for machine checks,external and I/O interrupts. This is then used to implement interruption injection for the following list of interruption types: - I/O (uses inject io interruption) __deliver_io - External (uses inject external interruption) __deliver_cpu_timer __deliver_ckc __deliver_emergency_signal __deliver_external_call - cpu restart (uses inject restart interruption) __deliver_restart - machine checks (uses mcic, failing address and external damage) __write_machine_check Please note that posted interrupts (GISA) are not used for protected guests as of today. The service interrupt is handled in a followup patch. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Instruction emulationJanosch Frank1-0/+2
We have two new SIE exit codes dealing with instructions. 104 (0x68) for a secure instruction interception, on which the SIE needs hypervisor action to complete the instruction. We can piggy-back on the existing instruction handlers. 108 which is merely a notification and provides data for tracking and management. For example this is used to tell the host about a new value for the prefix register. As there will be several special case handlers in later patches, we handle this in a separate function. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Handle SE notification interceptionsJanosch Frank1-0/+2
Since there is no interception for load control and load psw instruction in the protected mode, we need a new way to get notified whenever we can inject an IRQ right after the guest has just enabled the possibility for receiving them. The new interception codes solve that problem by providing a notification for changes to IRQ enablement relevant bits in CRs 0, 6 and 14, as well a the machine check mask bit in the PSW. No special handling is needed for these interception codes, the KVM pre-run code will consult all necessary CRs and PSW bits and inject IRQs the guest is enabled for. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390/mm: Make pages accessible before destroying the guestChristian Borntraeger1-0/+1
Before we destroy the secure configuration, we better make all pages accessible again. This also happens during reboot, where we reboot into a non-secure guest that then can go again into secure mode. As this "new" secure guest will have a new ID we cannot reuse the old page state. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-02-27KVM: s390: protvirt: Secure memory is not mergeableJanosch Frank1-0/+1
KSM will not work on secure pages, because when the kernel reads a secure page, it will be encrypted and hence no two pages will look the same. Let's mark the guest pages as unmergeable when we transition to secure mode. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: protvirt: Add initial vm and cpu lifecycle handlingJanosch Frank2-2/+91
This contains 3 main changes: 1. changes in SIE control block handling for secure guests 2. helper functions for create/destroy/unpack secure guests 3. KVM_S390_PV_COMMAND ioctl to allow userspace dealing with secure machines Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390: add new variants of UV CALLJanosch Frank1-5/+60
This adds two new helper functions for doing UV CALLs. The first variant handles UV CALLs that might have longer busy conditions or just need longer when doing partial completion. We should schedule when necessary. The second variant handles UV CALLs that only need the handle but have no payload (e.g. destroying a VM). We can provide a simple wrapper for those. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27KVM: s390/interrupt: do not pin adapter interrupt pagesUlrich Weigand1-3/+0
The adapter interrupt page containing the indicator bits is currently pinned. That means that a guest with many devices can pin a lot of memory pages in the host. This also complicates the reference tracking which is needed for memory management handling of protected virtual machines. It might also have some strange side effects for madvise MADV_DONTNEED and other things. We can simply try to get the userspace page set the bits and free the page. By storing the userspace address in the irq routing entry instead of the guest address we can actually avoid many lookups and list walks so that this variant is very likely not slower. If userspace messes around with the memory slots the worst thing that can happen is that we write to some other memory within that process. As we get the the page with FOLL_WRITE this can also not be used to write to shared read-only pages. Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [borntraeger@de.ibm.com: patch simplification] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27s390/mm: provide memory management functions for protected KVM guestsClaudio Imbrenda6-5/+73
This provides the basic ultravisor calls and page table handling to cope with secure guests: - provide arch_make_page_accessible - make pages accessible after unmapping of secure guests - provide the ultravisor commands convert to/from secure - provide the ultravisor commands pin/unpin shared - provide callbacks to make pages secure (inacccessible) - we check for the expected pin count to only make pages secure if the host is not accessing them - we fence hugetlbfs for secure pages - add missing radix-tree include into gmap.h The basic idea is that a page can have 3 states: secure, normal or shared. The hypervisor can call into a firmware function called ultravisor that allows to change the state of a page: convert from/to secure. The convert from secure will encrypt the page and make it available to the host and host I/O. The convert to secure will remove the host capability to access this page. The design is that on convert to secure we will wait until writeback and page refs are indicating no host usage. At the same time the convert from secure (export to host) will be called in common code when the refcount or the writeback bit is already set. This avoids races between convert from and to secure. Then there is also the concept of shared pages. Those are kind of secure where the host can still access those pages. We need to be notified when the guest "unshares" such a page, basically doing a convert to secure by then. There is a call "pin shared page" that we use instead of convert from secure when possible. We do use PG_arch_1 as an optimization to minimize the convert from secure/pin shared. Several comments have been added in the code to explain the logic in the relevant places. Co-developed-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27s390/protvirt: add ultravisor initializationVasily Gorbik1-0/+15
Before being able to host protected virtual machines, donate some of the memory to the ultravisor. Besides that the ultravisor might impose addressing limitations for memory used to back protected VM storage. Treat that limit as protected virtualization host's virtual memory limit. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27s390/protvirt: introduce host side setupVasily Gorbik1-2/+43
Add "prot_virt" command line option which controls if the kernel protected VMs support is enabled at early boot time. This has to be done early, because it needs large amounts of memory and will disable some features like STP time sync for the lpar. Extend ultravisor info definitions and expose it via uv_info struct filled in during startup. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: patch merging, splitting, fixing] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-02-27s390/mm: remove fake numa supportHeiko Carstens2-15/+7
It turned out that fake numa support is rather useless on s390, since there are no scenarios where there is any performance or other benefit when used. However it does provide maintenance cost and breaks from time to time. Therefore remove it. CONFIG_NUMA is still supported with a very small backend and only one node. This way userspace applications which require NUMA interfaces continue to work. Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node), since there is quite a bit of kernel code which assumes that more than one node is possible if CONFIG_NUMA is enabled. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-19s390/qdio: fill SBALEs with absolute addressesJulian Wiedmann1-2/+2
sbale->addr holds an absolute address (or for some FCP usage, an opaque request ID), and should only be used with proper virt/phys translation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-19s390/qdio: fill SL with absolute addressesJulian Wiedmann1-1/+1
As the comment says, sl->sbal holds an absolute address. qeth currently solves this through wild casting, while zfcp doesn't care. Handle this properly in the code that actually builds the SL. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio] Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-19s390: remove obsolete ieee_emulation_warningsStephen Kitt1-1/+0
s390 math emulation was removed with commit 5a79859ae0f3 ("s390: remove 31 bit support"), rendering ieee_emulation_warnings useless. The code still built because it was protected by CONFIG_MATHEMU, which was no longer selectable. This patch removes the sysctl_ieee_emulation_warnings declaration and the sysctl entry declaration. Link: https://lkml.kernel.org/r/20200214172628.3598516-1-steve@sk2.org Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-17s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_rangeNathan Chancellor1-1/+1
Clang warns: In file included from ../arch/s390/purgatory/purgatory.c:10: In file included from ../include/linux/kexec.h:18: In file included from ../include/linux/crash_core.h:6: In file included from ../include/linux/elfcore.h:5: In file included from ../include/linux/user.h:1: In file included from ../arch/s390/include/asm/user.h:11: ../arch/s390/include/asm/page.h:45:6: warning: converting the result of '<<' to a boolean always evaluates to false [-Wtautological-constant-compare] if (PAGE_DEFAULT_KEY) ^ ../arch/s390/include/asm/page.h:23:44: note: expanded from macro 'PAGE_DEFAULT_KEY' #define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) ^ 1 warning generated. Explicitly compare this against zero to silence the warning as it is intended to be used in a boolean context. Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0") Link: https://github.com/ClangBuiltLinux/linux/issues/860 Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-11s390/time: Fix clk type in get_tod_clockNathan Chancellor1-1/+1
Clang warns: In file included from ../arch/s390/boot/startup.c:3: In file included from ../include/linux/elf.h:5: In file included from ../arch/s390/include/asm/elf.h:132: In file included from ../include/linux/compat.h:10: In file included from ../include/linux/time.h:74: In file included from ../include/linux/time32.h:13: In file included from ../include/linux/timex.h:65: ../arch/s390/include/asm/timex.h:160:20: warning: passing 'unsigned char [16]' to parameter of type 'char *' converts between pointers to integer types with different sign [-Wpointer-sign] get_tod_clock_ext(clk); ^~~ ../arch/s390/include/asm/timex.h:149:44: note: passing argument to parameter 'clk' here static inline void get_tod_clock_ext(char *clk) ^ Change clk's type to just be char so that it matches what happens in get_tod_clock_ext. Fixes: 57b28f66316d ("[S390] s390_hypfs: Add new attributes") Link: https://github.com/ClangBuiltLinux/linux/issues/861 Link: http://lkml.kernel.org/r/20200208140858.47970-1-natechancellor@gmail.com Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-06Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull more KVM updates from Paolo Bonzini: "s390: - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests x86: - Bug fixes and cleanups - AMD support for APIC virtualization even in combination with in-kernel PIT or IOAPIC. MIPS: - Compilation fix. Generic: - Fix refcount overflow for zero page" * tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit x86: vmxfeatures: rename features for consistency with KVM and manual KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses KVM: x86: Fix perfctr WRMSR for running counters x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs() kvm: mmu: Separate generating and setting mmio ptes kvm: mmu: Replace unsigned with unsigned int for PTE access KVM: nVMX: Remove stale comment from nested_vmx_load_cr3() KVM: MIPS: Fold comparecount_func() into comparecount_wakeup() KVM: MIPS: Fix a build error due to referencing not-yet-defined function x86/kvm: do not setup pv tlb flush when not paravirtualized KVM: fix overflow of zero page refcount with ksm running KVM: x86: Take a u64 when checking for a valid dr7 value KVM: x86: use raw clock values consistently KVM: x86: reorganize pvclock_gtod_data members KVM: nVMX: delete meaningless nested_vmx_run() declaration KVM: SVM: allow AVIC without split irqchip kvm: ioapic: Lazy update IOAPIC EOI ...
2020-02-05Merge tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds4-40/+64
Pull more s390 updates from Vasily Gorbik: "The second round of s390 fixes and features for 5.6: - Add KPROBES_ON_FTRACE support - Add EP11 AES secure keys support - PAES rework and prerequisites for paes-s390 ciphers selftests - Fix page table upgrade for hugetlbfs" * tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pkey/zcrypt: Support EP11 AES secure keys s390/zcrypt: extend EP11 card and queue sysfs attributes s390/zcrypt: add new low level ep11 functions support file s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb s390/zcrypt: enable card/domain autoselect on ep11 cprbs s390/crypto: enable clear key values for paes ciphers s390/pkey: Add support for key blob with clear key value s390/crypto: Rework on paes implementation s390: support KPROBES_ON_FTRACE s390/mm: fix dynamic pagetable upgrade for hugetlbfs
2020-02-05Merge tag 'kvm-s390-next-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEADPaolo Bonzini1-0/+5
KVM: s390: Fixes and cleanups for 5.6 - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+0
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04asm-generic: Make dma-contiguous.h a mandatory include/asm headerMichal Simek1-1/+0
dma-continuguous.h is generic for all architectures except arm32 which has its own version. Similar change was done for msi.h by commit a1b39bae16a6 ("asm-generic: Make msi.h a mandatory include/asm header") Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
2020-02-04s390: mm: add p?d_leaf() definitionsSteven Price1-0/+2
walk_page_range() is going to be allowed to walk page tables other than those of user space. For this it needs to know when it has reached a 'leaf' entry in the page tables. This information is provided by the p?d_leaf() functions/macros. For s390, pud_large() and pmd_large() are already implemented as static inline functions. Add a macro to provide the p?d_leaf names for the generic code to use. Link: http://lkml.kernel.org/r/20191218162402.45610-9-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-01Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds1-16/+4
Pull random changes from Ted Ts'o: "Change /dev/random so that it uses the CRNG and only blocking if the CRNG hasn't initialized, instead of the old blocking pool. Also clean up archrandom.h, and some other miscellaneous cleanups" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (24 commits) s390x: Mark archrandom.h functions __must_check powerpc: Mark archrandom.h functions __must_check powerpc: Use bool in archrandom.h x86: Mark archrandom.h functions __must_check linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check linux/random.h: Use false with bool linux/random.h: Remove arch_has_random, arch_has_random_seed s390: Remove arch_has_random, arch_has_random_seed powerpc: Remove arch_has_random, arch_has_random_seed x86: Remove arch_has_random, arch_has_random_seed random: remove some dead code of poolinfo random: fix typo in add_timer_randomness() random: Add and use pr_fmt() random: convert to ENTROPY_BITS for better code readability random: remove unnecessary unlikely() random: remove kernel.random.read_wakeup_threshold random: delete code to pull data into pools random: remove the blocking pool random: make /dev/random be almost like /dev/urandom random: ignore GRND_RANDOM in getentropy(2) ...
2020-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+7
Pull updates from Andrew Morton: "Most of -mm and quite a number of other subsystems: hotfixes, scripts, ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov. MM is fairly quiet this time. Holidays, I assume" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) kcov: ignore fault-inject and stacktrace include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc() execve: warn if process starts with executable stack reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() init/main.c: fix misleading "This architecture does not have kernel memory protection" message init/main.c: fix quoted value handling in unknown_bootoption init/main.c: remove unnecessary repair_env_string in do_initcall_level init/main.c: log arguments and environment passed to init fs/binfmt_elf.c: coredump: allow process with empty address space to coredump fs/binfmt_elf.c: coredump: delete duplicated overflow check fs/binfmt_elf.c: coredump: allocate core ELF header on stack fs/binfmt_elf.c: make BAD_ADDR() unlikely fs/binfmt_elf.c: better codegen around current->mm fs/binfmt_elf.c: don't copy ELF header around fs/binfmt_elf.c: fix ->start_code calculation fs/binfmt_elf.c: smaller code generation around auxv vector fill lib/find_bit.c: uninline helper _find_next_bit() lib/find_bit.c: join _find_next_bit{_le} uapi: rename ext2_swab() to swab() and share globally in swab.h lib/scatterlist.c: adjust indentation in __sg_alloc_table ...
2020-01-31s390/boot: add dfltcc= kernel command line parameterMikhail Zaslonko1-0/+7
Add the new kernel command line parameter 'dfltcc=' to configure s390 zlib hardware support. Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+0
Pull KVM updates from Paolo Bonzini: "This is the first batch of KVM changes. ARM: - cleanups and corner case fixes. PPC: - Bugfixes x86: - Support for mapping DAX areas with large nested page table entries. - Cleanups and bugfixes here too. A particularly important one is a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is also a race condition which could be used in guest userspace to exploit the guest kernel, for which the embargo expired today. - Fast path for IPI delivery vmexits, shaving about 200 clock cycles from IPI latency. - Protect against "Spectre-v1/L1TF" (bring data in the cache via speculative out of bound accesses, use L1TF on the sibling hyperthread to read it), which unfortunately is an even bigger whack-a-mole game than SpectreV1. Sean continues his mission to rewrite KVM. In addition to a sizable number of x86 patches, this time he contributed a pretty large refactoring of vCPU creation that affects all architectures but should not have any visible effect. s390 will come next week together with some more x86 patches" * tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) x86/KVM: Clean up host's steal time structure x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed x86/kvm: Cache gfn to pfn translation x86/kvm: Introduce kvm_(un)map_gfn() x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit KVM: PPC: Book3S PR: Fix -Werror=return-type build failure KVM: PPC: Book3S HV: Release lock on page-out failure path KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer KVM: arm64: pmu: Only handle supported event counters KVM: arm64: pmu: Fix chained SW_INCR counters KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset KVM: x86: Use a typedef for fastop functions KVM: X86: Add 'else' to unify fastop and execute call path KVM: x86: inline memslot_valid_for_gpte KVM: x86/mmu: Use huge pages for DAX-backed files KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte() KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust() KVM: x86/mmu: Zap any compound page when collapsing sptes KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch) ...
2020-01-31KVM: s390: Cleanup initial cpu resetJanosch Frank1-0/+5
The code seems to be quite old and uses lots of unneeded spaces for alignment, which doesn't really help with readability. Let's: * Get rid of the extra spaces * Remove the ULs as they are not needed on 0s * Define constants for the CR 0 and 14 initial values * Use the sizeof of the gcr array to memset it to 0 Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-3-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-30s390/pkey/zcrypt: Support EP11 AES secure keysHarald Freudenberger1-24/+45
Extend the low level ep11 misc functions implementation by several functions to support EP11 key objects for paes and pkey: - EP11 AES secure key generation - EP11 AES secure key generation from given clear key value - EP11 AES secure key blob check - findcard function returns list of apqns based on given criterias - EP11 AES secure key derive to CPACF protected key Extend the pkey module to be able to generate and handle EP11 secure keys and also use them as base for deriving protected keys for CPACF usage. These ioctls are extended to support EP11 keys: PKEY_GENSECK2, PKEY_CLR2SECK2, PKEY_VERIFYKEY2, PKEY_APQNS4K, PKEY_APQNS4KT, PKEY_KBLOB2PROTK2. Additionally the 'clear key' token to protected key now uses an EP11 card if the other ways (via PCKMO, via CCA) fail. The PAES cipher implementation needed a new upper limit for the max key size, but is now also working with EP11 keys. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprbHarald Freudenberger1-14/+14
Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16, u32 instead of unsigned char. Declare pointers to mem from userspace with __user to give sparse a chance to check. Export zcrypt_send_ep11_cprb() function as this function will be called by code in progress which will build ep11 cprbs within the zcrypt device driver zoo and send them to EP11 crypto cards. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: enable card/domain autoselect on ep11 cprbsHarald Freudenberger1-1/+3
For EP11 CPRBs there was only to choose between specify one or more ep11 targets or not give a target at all. Without any target the zcrypt code assumed AUTOSELECT. For EP11 this ended up in choosing any EP11 APQN with regards to the weight. However, CCA CPRBs can have a more fine granular target addressing. The caller can give 0xFFFF as AUTOSELECT for the card and/or the domain. So it's possible to address any card but domain given or any domain but card given. This patch now introduces the very same for EP11 CPRB handling. An EP11 target entry now may contain 0xFFFF as card and/or domain value with the meaning of ANY card or domain. So now the same behavior as with CCA CPRBs becomes possible: Address any card with given domain or address any domain within given card. For convenience the zcrypt.h header file now has two new defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF value to address card any and domain any. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390: support KPROBES_ON_FTRACESven Schnelle1-1/+0
Instead of using our own kprobes-on-ftrace handling convert the code to support KPROBES_ON_FTRACE. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/mm: fix dynamic pagetable upgrade for hugetlbfsGerald Schaefer1-0/+2
Commit ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number of page table levels") changed the logic of TASK_SIZE and also removed the arch_mmap_check() implementation for s390. This combination has a subtle effect on how get_unmapped_area() for hugetlbfs pages works. It is now possible that a user process establishes a hugetlbfs mapping at an address above 4 TB, without triggering a dynamic pagetable upgrade from 3 to 4 levels. This is because hugetlbfs mappings will not use mm->get_unmapped_area, but rather file->f_op->get_unmapped_area, which currently is the generic implementation of hugetlb_get_unmapped_area() that does not know about s390 dynamic pagetable upgrades, but with the new definition of TASK_SIZE, it will now allow mappings above 4 TB. Subsequent access to such a mapped address above 4 TB will result in a page fault loop, because the CPU cannot translate such a large address with 3 pagetable levels. The fault handler will try to map in a hugepage at the address, but due to the folded pagetable logic it will end up with creating entries in the 3 level pagetable, possibly overwriting existing mappings, and then it all repeats when the access is retried. Apart from the page fault loop, this can have various nasty effects, e.g. kernel panic from one of the BUG_ON() checks in memory management code, or even data loss if an existing mapping gets overwritten. Fix this by implementing HAVE_ARCH_HUGETLB_UNMAPPED_AREA support for s390, providing an s390 version for hugetlb_get_unmapped_area() with pagetable upgrade support similar to arch_get_unmapped_area(), which will then be used instead of the generic version. Fixes: ee71d16d22bb ("s390/mm: make TASK_SIZE independent from the number of page table levels") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-5/+1
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf2dbd Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
2020-01-28Merge tag 's390-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds3-11/+11
Pull s390 updates from Vasily Gorbik: - Add clang 10 build support. - Fix BUG() implementation to contain precise bug address, which is relevant for kprobes. - Make ftraced function appear in a stacktrace. - Minor perf improvements and refactoring. - Possible deadlock and recovery fixes in pci code. * tag 's390-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix __EMIT_BUG() macro s390/ftrace: generate traced function stack frame s390: adjust -mpacked-stack support check for clang 10 s390/jump_label: use "i" constraint for clang s390/cpum_sf: Use DIV_ROUND_UP s390/cpum_sf: Use kzalloc and minor changes s390/cpum_sf: Convert debug trace to common layout s390/pci: Fix possible deadlock in recover_store() s390/pci: Recover handle in clp_set_pci_fn()
2020-01-28Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+2
Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-27KVM: Drop kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit()Sean Christopherson1-1/+0
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all arch specific implementations are nops. Acked-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-25s390x: Mark archrandom.h functions __must_checkRichard Henderson1-4/+4
We must not use the pointer output without validating the success of the random read. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200110145422.49141-11-broonie@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.