aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26s390/sclp: sort out physical vs virtual pointers usageAlexander Gordeev1-0/+1
Provide physical addresses whenever the hardware interface expects it or a 32-bit value used for tracking. Variable sclp_early_sccb gets initialized in the decompressor and points to an address in physcal memory. Yet, it is used as virtual memory pointer and therefore should be converted. Note, the other two __bootdata variables sclp_info_sccb and sclp_info_sccb_valid contain plain data, but no pointers and do need any special care. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26s390/setup: convert start and end initrd pointers to virtualAlexander Gordeev1-1/+1
Variables initrd_start and initrd_end are expected to hold virtual memory pointers, not physical. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26s390/setup: use physical pointers for memblock_reserve()Alexander Gordeev1-5/+2
memblock_reserve() function accepts physcal address of a memory block to be reserved, but provided with virtual memory pointers. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26s390/setup: use virtual address for STSI instructionAlexander Gordeev1-4/+2
Provide virtual memory pointer for system-information block. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-26s390/cpcmd: use physical address for command and responseAlexander Gordeev1-3/+3
Virtual Console Function DIAGNOSE 8 accepts physical addresses of command and response strings. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-25KVM: s390: pv: avoid stalls when making pages secureClaudio Imbrenda1-6/+23
Improve make_secure_pte to avoid stalls when the system is heavily overcommitted. This was especially problematic in kvm_s390_pv_unpack, because of the loop over all pages that needed unpacking. Due to the locks being held, it was not possible to simply replace uv_call with uv_call_sched. A more complex approach was needed, in which uv_call is replaced with __uv_call, which does not loop. When the UVC needs to be executed again, -EAGAIN is returned, and the caller (or its caller) will try again. When -EAGAIN is returned, the path is the same as when the page is in writeback (and the writeback check is also performed, which is harmless). Fixes: 214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20210920132502.36111-5-imbrenda@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-25s390/uv: fully validate the VMA before calling follow_page()David Hildenbrand1-1/+1
We should not walk/touch page tables outside of VMA boundaries when holding only the mmap sem in read mode. Evil user space can modify the VMA layout just before this function runs and e.g., trigger races with page table removal code since commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"). find_vma() does not check if the address is >= the VMA start address; use vma_lookup() instead. Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-20exit: Remove calls of do_exit after noreturn versions of dieEric W. Biederman1-1/+1
On nds32, openrisc, s390, sh, and xtensa the function die never returns. Mark die __noreturn so that no one expects die to return. Remove the do_exit calls after die as they will never be reached. Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: openrisc@lists.librecores.org Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Fixes: 2.3.16 Fixes: 2.3.99-pre8 Fixes: 3f65ce4d141e ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 5") Fixes: 664eec400bf8 ("nds32: MMU fault handling and page table management") Fixes: 61e85e367535 ("OpenRISC: Memory management") Link: https://lkml.kernel.org/r/20211020174406.17889-2-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-19s390: make STACK_FRAME_OVERHEAD available via asm-offsets.hHeiko Carstens1-0/+1
Make STACK_FRAME_OVERHEAD available via asm-offsets.h. This allows to add s390 specific asm code to e.g. ftrace samples, without requiring to add random header files, which might cause all sort of problems on other architectures. asm-offsets.h can be assumed to be non-problematic. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20211012133802.2460757-3-hca@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-19s390/ftrace: add HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALL supportHeiko Carstens1-6/+17
This is the s390 variant of commit 562955fe6a55 ("ftrace/x86: Add register_ftrace_direct() for custom trampolines"). Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20211012133802.2460757-2-hca@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-15sched: Add wrapper for get_wchan() to keep task blockedKees Cook1-2/+2
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm] Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
2021-10-11s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementationsHeiko Carstens1-12/+29
ftrace_regs_caller is an alias to ftrace_caller - making ftrace_caller quite heavyweight. Split the function and provide an ftrace_caller implementation which comes with fewer instructions. Especially getting rid of 'stosm' on each function entry should help here, e.g. to have less performance impact on live patched functions. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/jump_label: add __init_or_module annotationHeiko Carstens1-2/+3
Add missing __init_or_module to arch_jump_label_transform_static(). Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/jump_label: rename __jump_label_transform()Heiko Carstens1-6/+6
Trivial patch just to get rid of the leading underscores. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/jump_label: make use of HAVE_JUMP_LABEL_BATCHHeiko Carstens1-0/+13
Specify HAVE_JUMP_LABEL_BATCH in header file. This allows to make use of the arch_jump_label_transform_queue()/arch_jump_label_transform_apply() mechanism. However unlike on x86, which currently is the only user of this mechanism, the to be patched instructions are still directly modified. The only difference to before is that serialization is only done after all instructions have been modified. This way the number of serialization/synchronization events is reduced. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/ftrace: add missing serialization for graph caller patchingHeiko Carstens1-0/+2
CPUs must be serialized also when ftrace_graph_caller gets patched. This is missing since ftrace function graph support was added on s390. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/ftrace: use text_poke_sync_lock()Heiko Carstens1-6/+6
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390/jump_label: use text_poke_sync()Heiko Carstens1-6/+2
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-11s390: introduce text_poke_sync()Heiko Carstens1-0/+20
Introduce a text_poke_sync() similar to what x86 has. This can be used to execute a serializing instruction on all CPUs (including the current one). Note: according to the Principles of Operation an IPI (= interrupt) will already serialize a CPU, however it is better to be explicit. In addition on_each_cpu() makes sure that also the current CPU get serialized - just to make sure that possible preemption can prevent some theoretical case where a CPU will not be serialized. Therefore text_poke_sync() has to be used whenever code got modified, just to avoid to rely on implicit serialization. Also introduce text_poke_sync_lock() which will also disable CPU hotplug, to prevent that any CPU is just going online with a prefetched old version of a modified instruction. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-08ftrace: Cleanup ftrace_dyn_arch_init()Weizhao Ouyang1-5/+0
Most of ARCHs use empty ftrace_dyn_arch_init(), introduce a weak common ftrace_dyn_arch_init() to cleanup them. Link: https://lkml.kernel.org/r/20210909090216.1955240-1-o451686892@gmail.com Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390) Acked-by: Helge Deller <deller@gmx.de> (parisc) Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-04s390/boot: allocate amode31 section in decompressorAlexander Gordeev3-13/+11
The memory for amode31 section is allocated from the decompressed kernel. Instead, allocate that memory from the decompressor. This is a prerequisite to allow initialization of the virtual memory before the decompressed kernel takes over. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04s390/boot: initialize control registers in decompressorAlexander Gordeev1-18/+0
Partially revert commit 4555b9f34296 ("s390/boot: move dma sections from decompressor to decompressed kernel"). This is a prerequisite to allow initialization of virtual memory in decompressor and avoid overwriting of ASCEs in the decompressed kernel otherwise. Since the control registers 2, 5 and 15 are reinitialized in the decompressed kernel again, this change does not prevent relocating of amode31 section in any way. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04s390/kprobes: add sanity checkSven Schnelle1-1/+47
Check whether the specified address points to the start of an instruction to prevent users from setting a kprobe in the mid of an instruction which would crash the kernel. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04s390/ftrace: remove dead codeHeiko Carstens1-80/+6
ftrace_shared_hotpatch_trampoline() never returns NULL, therefore quite a bit of code can be removed. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-01audit: add support for the openat2 syscallRichard Guy Briggs2-0/+4
The openat2(2) syscall was added in kernel v5.6 with commit fddb5d430ad9 ("open: introduce openat2(2) syscall"). Add the openat2(2) syscall to the audit syscall classifier. Link: https://github.com/linux-audit/audit-kernel/issues/67 Link: https://lore.kernel.org/r/f5f1a4d8699613f8c02ce762807228c841c2e26f.1621363275.git.rgb@redhat.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> [PM: merge fuzz due to previous header rename, commit line wraps] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-10-01audit: replace magic audit syscall class numbers with macrosRichard Guy Briggs2-10/+11
Replace audit syscall class magic numbers with macros. This required putting the macros into new header file include/linux/audit_arch.h since the syscall macros were included for both 64 bit and 32 bit in any compat code, causing redefinition warnings. Link: https://lore.kernel.org/r/2300b1083a32aade7ae7efb95826e8f3f260b1df.1621363275.git.rgb@redhat.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> [PM: renamed header to audit_arch.h after consulting with Richard] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-09-30kprobes: treewide: Make it harder to refer kretprobe_trampoline directlyMasami Hiramatsu2-6/+6
Since now there is kretprobe_trampoline_addr() for referring the address of kretprobe trampoline code, we don't need to access kretprobe_trampoline directly. Make it harder to refer by renaming it to __kretprobe_trampoline(). Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2 Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30kprobes: treewide: Remove trampoline_address from kretprobe_trampoline_handler()Masami Hiramatsu1-1/+1
The __kretprobe_trampoline_handler() callback, called from low level arch kprobes methods, has the 'trampoline_address' parameter, which is entirely superfluous as it basically just replicates: dereference_kernel_function_descriptor(kretprobe_trampoline) In fact we had bugs in arch code where it wasn't replicated correctly. So remove this superfluous parameter and use kretprobe_trampoline_addr() instead. Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30kprobes: treewide: Cleanup the error messages for kprobesMasami Hiramatsu1-1/+3
This clean up the error/notification messages in kprobes related code. Basically this defines 'pr_fmt()' macros for each files and update the messages which describes - what happened, - what is the kernel going to do or not do, - is the kernel fine, - what can the user do about it. Also, if the message is not needed (e.g. the function returns unique error code, or other error message is already shown.) remove it, and replace the message with WARN_*() macros if suitable. Link: https://lkml.kernel.org/r/163163036568.489837.14085396178727185469.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-09Merge tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds6-15/+33
Pull more s390 updates from Heiko Carstens: "Except for the xpram device driver removal it is all about fixes and cleanups. - Fix topology update on cpu hotplug, so notifiers see expected masks. This bug was uncovered with SCHED_CORE support. - Fix stack unwinding so that the correct number of entries are omitted like expected by common code. This fixes KCSAN selftests. - Add kmemleak annotation to stack_alloc to avoid false positive kmemleak warnings. - Avoid layering violation in common I/O code and don't unregister subchannel from child-drivers. - Remove xpram device driver for which no real use case exists since the kernel is 64 bit only. Also all hypervisors got required support removed in the meantime, which means the xpram device driver is dead code. - Fix -ENODEV handling of clp_get_state in our PCI code. - Enable KFENCE in debug defconfig. - Cleanup hugetlbfs s390 specific Kconfig dependency. - Quite a lot of trivial fixes to get rid of "W=1" warnings, and and other simple cleanups" * tag 's390-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: hugetlbfs: s390 is always 64bit s390/ftrace: remove incorrect __va usage s390/zcrypt: remove incorrect kernel doc indicators scsi: zfcp: fix kernel doc comments s390/sclp: add __nonstring annotation s390/hmcdrv_ftp: fix kernel doc comment s390: remove xpram device driver s390/pci: read clp_list_pci_req only once s390/pci: fix clp_get_state() handling of -ENODEV s390/cio: fix kernel doc comment s390/ctrlchar: fix kernel doc comment s390/con3270: use proper type for tasklet function s390/cpum_cf: move array from header to C file s390/mm: fix kernel doc comments s390/topology: fix topology information when calling cpu hotplug notifiers s390/unwind: use current_frame_address() to unwind current task s390/configs: enable CONFIG_KFENCE in debug_defconfig s390/entry: make oklabel within CHKSTG macro local s390: add kmemleak annotation in stack_alloc() s390/cio: dont unregister subchannel from child-drivers
2021-09-08compat: remove some compat entry pointsArnd Bergmann1-5/+5
These are all handled correctly when calling the native system call entry point, so remove the special cases. Link: https://lkml.kernel.org/r/20210727144859.4150043-6-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08s390/ftrace: remove incorrect __va usageHeiko Carstens1-2/+2
The address of ftrace_graph_caller is already virtual. Using __va() to translate the address is wrong. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-07s390/cpum_cf: move array from header to C fileHeiko Carstens1-0/+8
Move array from header to C file to avoid that it gets defined in every C file where the header is included: In file included from arch/s390/kernel/perf_cpum_cf_common.c:19: ./arch/s390/include/asm/cpu_mcf.h:27:18: warning: ‘cpumf_ctr_ctl’ defined but not used [-Wunused-const-variable=] 27 | static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = { | ^~~~~~~~~~~~~ Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-07s390/topology: fix topology information when calling cpu hotplug notifiersSven Schnelle2-8/+14
The cpu hotplug notifiers are called without updating the core/thread masks when a new CPU is added. This causes problems with code setting up data structures in a cpu hotplug notifier, and relying on that later in normal code. This caused a crash in the new core scheduling code (SCHED_CORE), where rq->core was set up in a notifier depending on cpu masks. To fix this, add a cpu_setup_mask which is used in update_cpu_masks() instead of the cpu_online_mask to determine whether the cpu masks should be set for a certain cpu. Also move update_cpu_masks() to update the masks before calling notify_cpu_starting() so that the notifiers are seeing the updated masks. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Cc: <stable@vger.kernel.org> [hca@linux.ibm.com: get rid of cpu_online_mask handling] Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-3/+8
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm: wire up syscall process_mreleaseSuren Baghdasaryan1-0/+2
Split off from prev patch in the series that implements the syscall. Link: https://lkml.kernel.org/r/20210809185259.405936-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jan Engelhardt <jengelh@inai.de> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tim Murray <timmurray@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03memblock: make memblock_find_in_range method privateMike Rapoport1-3/+6
There are a lot of uses of memblock_find_in_range() along with memblock_reserve() from the times memblock allocation APIs did not exist. memblock_find_in_range() is the very core of memblock allocations, so any future changes to its internal behaviour would mandate updates of all the users outside memblock. Replace the calls to memblock_find_in_range() with an equivalent calls to memblock_phys_alloc() and memblock_phys_alloc_range() and make memblock_find_in_range() private method of memblock. This simplifies the callers, ensures that (unlikely) errors in memblock_reserve() are handled and improves maintainability of memblock_find_in_range(). Link: https://lkml.kernel.org/r/20210816122622.30279-1-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [ACPI] Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Nick Kossifidis <mick@ics.forth.gr> [riscv] Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-01Merge branch 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-1/+1
Pull exit cleanups from Eric Biederman: "In preparation of doing something about PTRACE_EVENT_EXIT I have started cleaning up various pieces of code related to do_exit. Most of that code I did not manage to get tested and reviewed before the merge window opened but a handful of very useful cleanups are ready to be merged. The first change is simply the removal of the bdflush system call. The code has now been disabled long enough that even the oldest userspace working userspace setups anyone can find to test are fine with the bdflush system call being removed. Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of calling do_exit directly is interesting only in that it is nearly the most difficult of the incorrect uses of do_exit to remove. The change to the seccomp code to simply send a signal instead of calling do_coredump directly is a very nice little cleanup made possible by realizing the existing signal sending helpers were missing a little bit of functionality that is easy to provide" * 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/seccomp: Dump core when there is only one live thread signal/seccomp: Refactor seccomp signal and coredump generation signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die exit/bdflush: Remove the deprecated bdflush system call
2021-08-31s390/entry: make oklabel within CHKSTG macro localHeiko Carstens1-2/+2
Make the oklabel within the CHKSTG macro local. This makes sure that tools like objdump and the crash debugging tool still disassemble full functions where the macro has been used instead of stopping half way where such a global label is used and one has to guess how to disassemble the rest of such a function: E.g.: 0000000000cb0270 <mcck_int_handler>: cb0270: b2 05 03 20 stck 800 ... cb0354: a7 74 00 97 jne cb0482 <oklabel270+0xe2> 0000000000cb0358 <oklabel243>: cb0358: c0 e0 00 22 4e 8f larl %r14,10fa076 <opcode+0x2558> ... Fixes: d35925b34996 ("s390/mcck: move storage error checks to assembler") Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-31s390: add kmemleak annotation in stack_alloc()Sven Schnelle1-3/+7
kmemleak with enabled auto scanning reports that our stack allocation is lost. This is because we're saving the pointer + STACK_INIT_OFFSET to lowcore. When kmemleak now scans the objects, it thinks that this one is lost because it can't find a corresponding pointer. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-30Merge tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds31-371/+1070
Pull s390 updates from Heiko Carstens: - Improve ftrace code patching so that stop_machine is not required anymore. This requires a small common code patch acked by Steven Rostedt: https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/ - Enable KCSAN for s390. This comes with a small common code change to fix a compile warning. Acked by Marco Elver: https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com - Add KFENCE support for s390. This also comes with a minimal x86 patch from Marco Elver who said also this can be carried via the s390 tree: https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/ - More changes to prepare the decompressor for relocation. - Enable DAT also for CPU restart path. - Final set of register asm removal patches; leaving only three locations where needed and sane. - Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO support to hwcaps flags. - Cleanup hwcaps implementation. - Add new instructions to in-kernel disassembler. - Various QDIO cleanups. - Add SCLP debug feature. - Various other cleanups and improvements all over the place. * tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits) s390: remove SCHED_CORE from defconfigs s390/smp: do not use nodat_stack for secondary CPU start s390/smp: enable DAT before CPU restart callback is called s390: update defconfigs s390/ap: fix state machine hang after failure to enable irq KVM: s390: generate kvm hypercall functions s390/sclp: add tracing of SCLP interactions s390/debug: add early tracing support s390/debug: fix debug area life cycle s390/debug: keep debug data on resize s390/diag: make restart_part2 a local label s390/mm,pageattr: fix walk_pte_level() early exit s390: fix typo in linker script s390: remove do_signal() prototype and do_notify_resume() function s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c s390/pci: improve DMA translation init and exit s390/pci: simplify CLP List PCI handling s390/pci: handle FH state mismatch only on disable s390/pci: fix misleading rc in clp_set_pci_fn() s390/boot: factor out offset_vmlinux_info() function ...
2021-08-26s390/smp: do not use nodat_stack for secondary CPU startAlexander Gordeev1-15/+10
The secondary CPU start C routine uses nodat_stack as a interim stack before finally switching to kernel_stack. Such scheme is superfluous, since the assembler restart interrupt handler (that secondary CPU starter is called from) does not need to use any stack for switching into DAT mode. Once DAT is on, any stack including virtually- mapped one could be used. Avoid the use of nodat_stack and smp_start_secondary() helper. Instead, initiate kernel_stack directly from the restart interrupt handler. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-26s390/smp: enable DAT before CPU restart callback is calledAlexander Gordeev6-18/+38
The restart interrupt is triggered whenever a secondary CPU is brought online, a remote function call dispatched from another CPU or a manual PSW restart is initiated and causes the system to kdump. The handling routine is always called with DAT turned off. It then initializes the stack frame and invokes a callback. The existing callbacks handle DAT as follows: * __do_restart() and __machine_kexec() turn in on upon entry; * __ipl_run(), __reipl_run() and __dump_run() do not turn it right away, but all of them call diag308() - which turns DAT on, but only if kasan is enabled; In addition to the described complexity all callbacks (and the functions they call) should avoid kasan instrumentation while DAT is off. This update enables DAT in the assembler restart handler and relieves any callbacks (which are mostly C functions) from dealing with DAT altogether. There are four types of CPU restart that initialize control registers in different ways: 1. Start of secondary CPU on boot - control registers are inherited from the IPL CPU; 2. Restart of online CPU - control registers of the CPU being restarted are kept; 3. Hotplug of offline CPU - control registers are inherited from the starting CPU; 4. Start of offline CPU triggered by manual PSW restart - the control registers are read from the absolute lowcore and contain the boot time IPL CPU values updated with all follow-up calls of smp_ctl_set_bit() and smp_ctl_clear_bit() routines; In first three cases contents of the control registers is the most recent. In the latter case control registers are good enough to facilitate successful completion of kdump operation. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/sclp: add tracing of SCLP interactionsPeter Oberparleiter1-7/+9
Add tracing of interactions between the SCLP base driver, firmware and other drivers to support problem determination in case of SCLP-related issues. For that purpose this patch introduces two new s390dbf debug areas: - sclp: An abbreviated log of all common interactions - sclp_err: A full log of failed or abnormal interactions Tracing of full SCCB contents can be enabled for the sclp area by setting its debug level to maximum (6). Overview of added trace events: * Firmware interaction: - SRV1: Service call about to be issued - SRV2: Service call was issued - INT: Interrupt received * Driver interaction: - RQAD: Request was added - RQOK: Request success - RQAB: Request aborted - RQTM: Request timed out - REG: Event listener registered - UREG: Event listener unregistered - EVNT: Event callback - STCG: State-change callback * Abnormal events: - TMO: A timeout occurred - UNEX: Unexpected SCCB completion * Other (not traced at default level): - SYN1: Synchronous wait start - SYN2: Synchronous wait end Since the SCLP interface is used by console drivers this patch also moves s390dbf printks outside the critical section protected by debug area locks to prevent a potential deadlock that would otherwise be introduced between console_owner --> sclp_lock --> sclp_debug.lock. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: add early tracing supportPeter Oberparleiter1-0/+55
Debug areas can currently only be used after s390dbf initialization which occurs as a postcore_initcall. This is too late for tracing earlier code such as that related to console_init(). This patch introduces a macro for defining a statically initialized debug area that can be used to trace very early code. The macro is made available for built-in code only because modules are never running during early boot. Example usage: 1. Define static debug area: DEFINE_STATIC_DEBUG_INFO(my_debug, "my_debug", 4, 1, 16, &debug_hex_ascii_view); 2. Add trace entry: debug_event(&my_debug, 0, "DATA", 4); Note: The debug area is automatically registered in debugfs during boot. A driver must not call any of the debug_register()/_unregister() functions on a static debug_info_t! Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: fix debug area life cyclePeter Oberparleiter1-46/+56
Currently allocation and registration of s390dbf debug areas are tied together. As a result, a debug area cannot be unregistered and re-registered while any process has an associated debugfs file open. Fix this by splitting alloc/release from register/unregister. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/debug: keep debug data on resizePeter Oberparleiter1-21/+53
Any previously recorded s390dbf debug data is reset when a debug area is resized using the 'pages' sysfs attribute. This can make live-debugging unnecessarily complex. Fix this by copying existing debug data to the newly allocated debug area when resizing. Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390/diag: make restart_part2 a local labelHeiko Carstens1-2/+2
Avoid that the "restart_part2" label, which is in the middle of a function, appears in /proc/kallsyms. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390: fix typo in linker scriptHeiko Carstens1-1/+1
Rename amod31 to amode31 like it was supposed to be. Fixes: c78d0c7484f0 ("s390: rename dma section to amode31") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-25s390: remove do_signal() prototype and do_notify_resume() functionSven Schnelle2-8/+0
Both are no longer used since the conversion to generic entry, therefore remove them. Fixes: 56e62a737028 ("s390: convert to generic entry") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.