aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-26s390/pci: remove iomap sanity checksSebastian Ott1-9/+4
Since each iomap_entry handles only one bar of one pci function (even when disjunct ranges of a bar are mapped) the sanity check in pci_iomap_range is not needed and can be removed. Also convert the remaining BUG_ONs to WARN_ONs. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: set error state for unusable functionsSebastian Ott1-0/+5
We receive special notifications from firmware when an error was detected and a pci function became unusable. Set the error_state accordingly to give device drivers a hint that they don't need to try error recovery. Suggested-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: fix bar checkSebastian Ott1-1/+1
Fix the check which bar space we should map to allow available bars only. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: resize iomapSebastian Ott1-12/+22
On s390 we need to maintain a mapping between iomem addresses and arch specific function identifiers. Currently the mapping table is created as such that we could span the whole iomem address space. Since we can only map each bar space from each possible function we have an upper bound for the number of mapping entries. This reduces the size of the iomap from 256K to less than 4K (using the defconfig). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: improve ZPCI_* macrosSebastian Ott1-1/+1
Most of the constants defined in pci_io.h depend on each other and thus can be calculated. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26s390/pci: provide ZPCI_ADDR macroSebastian Ott1-7/+3
Provide and use a ZPCI_ADDR macro as the complement of ZPCI_IDX to get rid of some constants in the code. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds2-7/+15
Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
2016-01-09[s390] page_to_phys() always returns a multiple of PAGE_SIZEAl Viro1-2/+1
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-27s390/pci_dma: fix DMA table corruption with > 4 TB main memoryGerald Schaefer2-7/+15
DMA addresses returned from map_page() are calculated by using an iommu bitmap plus a start_dma offset. The size of this bitmap is based on the main memory size. If we have more than (4 TB - start_dma) main memory, the DMA address calculation will also produce addresses > 4 TB. Such addresses cannot be inserted in the 3-level DMA page table, instead the entries modulo 4 TB will be overwritten. Fix this by restricting the iommu bitmap size to (4 TB - start_dma). Also set zdev->end_dma to the actual end address of the usable range, instead of the theoretical maximum as reported by the hardware, which fixes a sanity check in dma_map() and also the IOMMU API domain geometry aperture calculation. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/pci_dma: improve debugging of errors during dma mapSebastian Ott1-11/+30
Improve debugging to find out what went wrong during a failed dma map/unmap operation. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/pci_dma: handle dma table failuresSebastian Ott1-14/+24
We use lazy allocation for translation table entries but don't handle allocation (and other) failures during translation table updates. Handle these failures and undo translation table updates when it's meaningful. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/pci_dma: unify label of invalid translation table entriesSebastian Ott1-4/+3
Newly allocated translation table entries are flagged as invalid and protected. If an existing translation table entry is invalidated, the protection flag is left unchanged. If a page (with invalid and protection flag set) is accessed it's undefined which type of exception we'll receive. Make sure to always set the invalid flag only. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-05Merge tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-12/+25
Pull iommu updates from Joerg Roedel: "This time including: - A new IOMMU driver for s390 pci devices - Common dma-ops support based on iommu-api for ARM64. The plan is to use this as a basis for ARM32 and hopefully other architectures as well in the future. - MSI support for ARM-SMMUv3 - Cleanups and dead code removal in the AMD IOMMU driver - Better RMRR handling for the Intel VT-d driver - Various other cleanups and small fixes" * tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/vt-d: Fix return value check of parse_ioapics_under_ir() iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope() iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir iommu: Move default domain allocation to iommu_group_get_for_dev() iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev iommu/arm-smmu: Switch to device_group call-back iommu/fsl: Convert to device_group call-back iommu: Add device_group call-back to x86 iommu drivers iommu: Add generic_device_group() function iommu: Export and rename iommu_group_get_for_pci_dev() iommu: Revive device_group iommu-ops call-back iommu/amd: Remove find_last_devid_on_pci() iommu/amd: Remove first/last_device handling iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL iommu/amd: Cleanup buffer allocation iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu iommu/amd: Align DTE flag definitions iommu/amd: Remove old alias handling code iommu/amd: Set alias DTE in do_attach/do_detach iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled ...
2015-10-14s390/pci: reshuffle struct used to write debug dataSebastian Ott1-3/+3
zpci_err_insn writes stale stack content to the debugfs. Ensure that the struct in zpci_err_insn is ordered in a way that we don't have uninitialized holes in it. In addition to that add the packed attribute. Fixes: 3d8258e (s390/pci: move debug messages to debugfs) Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-06iommu/s390: Add iommu api for s390 pci devicesGerald Schaefer1-12/+25
This adds an IOMMU API implementation for s390 PCI devices. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-09-10dma-mapping: consolidate dma_set_maskChristoph Hellwig1-10/+0
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-01Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-3/+3
Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-19s390/pci: move debug messages to debugfsSebastian Ott1-10/+23
The error messages in pci_insn are for debug purposes only. Move them to the debugfs. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-29s390/pci: use pci_rescan_remove_lockSebastian Ott2-4/+13
Make sure that we use the pci_rescan_remove_lock when we remove or add functions from/to the bus. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-29s390/pci: handle events for unused functionsSebastian Ott1-4/+2
Receiving error events for a pci function that's currently not in use will crash the kernel. For example the procedure for FW upgrades might include: * remove the function from Linux * apply FW upgrade * rescan for new functions Receiving an event during the FW upgrade will result in a use after free when printing the functions name. Just print "n/a" in such cases. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-29s390/pci: free resources after failed bus allocationSebastian Ott1-4/+9
Free bus resources when the allocation/registration of the bus failed. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-22s390/pci: Use for_pci_msi_entry() to access MSI device listJiang Liu1-3/+3
Use accessor for_each_pci_msi_entry() to access MSI device list, so we could easily move msi_list from struct pci_dev into struct device later. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Link: http://lkml.kernel.org/r/1436428847-8886-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-22s390/pci: inline get_zdevSebastian Ott3-20/+15
Inline get_zdev to save ~200 bytes of kernel text for CONFIG_PCI=y. Also rename the function to to_zpci to make clear that we don't do reference counting here. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-18s390/pci: improve handling of hotplug event 0x301Sebastian Ott1-1/+7
Hypervisors may deliver event 0x301 not only for standby but also for reserved devices. Just handle event 0x301 regardless of the device's state. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-20Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds3-15/+32
Pull more s390 updates from Martin Schwidefsky: "The big thing in this second merge for s390 is the new eBPF JIT from Michael which replaces the old 32-bit backend. The remaining commits are bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: add locking for fmb access s390/pci: extract software counters from fmb s390/dasd: Fix unresumed device after suspend/resume having no paths s390/dasd: fix unresumed device after suspend/resume s390/dasd: fix inability to set a DASD device offline s390/mm: Fix memory hotplug for unaligned standby memory s390/bpf: Add s390x eBPF JIT compiler backend s390: Use bool function return values of true/false not 1/0
2015-04-15s390: remove use of seq_printf return valueJoe Perches1-2/+4
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15s390/pci: add locking for fmb accessSebastian Ott2-6/+10
Function measurement can be toggled at runtime. Make sure that all access to the fmb is protected via a mutex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-15s390/pci: extract software counters from fmbSebastian Ott3-10/+24
The software counters are not a part of the function measurement block. Also we do not check for zdev->fmb != NULL when using these counters (function measurement can be toggled at runtime). Just move the software counters to struct zpci_dev. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-2/+1
Pull s390 updates from Martin Schwidefsky: "The major change in this merge is the removal of the support for 31-bit kernels. Naturally 31-bit user space will continue to work via the compat layer. And then some cleanup, some improvements and bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits) s390/smp: wait until secondaries are active & online s390/hibernate: fix save and restore of kernel text section s390/cacheinfo: add missing facility check s390/syscalls: simplify syscall_get_arch() s390/irq: enforce correct irqclass_sub_desc array size s390: remove "64" suffix from mem64.S and swsusp_asm64.S s390/ipl: cleanup macro usage s390/ipl: cleanup shutdown_action attributes s390/ipl: cleanup bin attr usage s390/uprobes: fix address space annotation s390: add missing arch_release_task_struct() declaration s390: make couple of functions and variables static s390/maccess: improve s390_kernel_write() s390/maccess: remove potentially broken probe_kernel_write() s390/watchdog: support for KVM hypervisors and delete pr_info messages s390/watchdog: enable KEEPALIVE for /dev/watchdog s390/dasd: remove setting of scheduler from driver s390/traps: panic() instead of die() on translation exception s390: remove test_facility(2) (== z/Architecture mode active) checks s390/cmpxchg: simplify cmpxchg_double ...
2015-03-25s390: remove test_facility(2) (== z/Architecture mode active) checksHeiko Carstens1-2/+1
Given that the kernel now always runs in 64 bit mode, it is pointless to check if the z/Architecture mode is active. Remove the checks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-23Merge branches 'pci/enumeration' and 'pci/virtualization' into nextBjorn Helgaas1-1/+1
* pci/enumeration: PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Assign resources before drivers claim devices (pci_scan_bus()) * pci/virtualization: PCI: Add ACS quirks for Intel 1G NICs
2015-03-19PCI: Assign resources before drivers claim devices (pci_scan_root_bus())Yijing Wang1-1/+1
Previously, pci_scan_root_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_root_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_root_bus() and do it after any resource assignment in the callers. Note that ARM's pci_common_init_dev() already called pci_bus_add_devices() after pci_scan_root_bus(), so we only need to remove the first call: pci_common_init_dev pcibios_init_hw pci_scan_root_bus pci_bus_add_devices # first call pci_bus_assign_resources pci_bus_add_devices # second call [bhelgaas: changelog, drop "root_bus" var in alpha common_init_pci(), return failure earlier in mn10300, add "return" in x86 pcibios_scan_root(), return early if xtensa platform_pcibios_fixup() fails] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com> CC: David Howells <dhowells@redhat.com> CC: Tony Luck <tony.luck@intel.com> CC: Michal Simek <monstr@monstr.eu> CC: Ralf Baechle <ralf@linux-mips.org> CC: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: Chris Metcalf <cmetcalf@ezchip.com> CC: Chris Zankel <chris@zankel.net> CC: Max Filippov <jcmvbkbc@gmail.com> CC: Thomas Gleixner <tglx@linutronix.de>
2015-02-27s390/pci: unify pci_iomap symbol exportsSebastian Ott1-2/+2
Since commit 8cfc99b58366 ("s390: add pci_iomap_range") we use EXPORT_SYMBOL for pci_iomap but EXPORT_SYMBOL_GPL for pci_iounmap. Change the related functions to use EXPORT_SYMBOL like the asm-generic variants do. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-27s390/pci: fix [un]map_resources sequenceSebastian Ott1-10/+14
Commit 8cfc99b58366 ("s390: add pci_iomap_range") introduced counters to keep track of the number of mappings created. This revealed that we don't have our internal mappings in order when using hotunplug or resume from hibernate. This patch addresses both issues. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-26s390/pci: fix possible information leak in mmio syscallSebastian Ott1-9/+8
Make sure that even in error situations we do not use copy_to_user on uninitialized kernel memory. Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-18Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds1-7/+27
Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-01-21s390: add pci_iomap_rangeMichael S. Tsirkin1-7/+27
Virtio drivers should map the part of the range they need, not necessarily all of it. To this end, support mapping ranges within BAR on s390. Since multiple ranges can now be mapped within a BAR, we keep track of the number of mappings created, and only clear out the mapping for a BAR when this number reaches 0. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-01-08s390/pci: add missing address space annotationHeiko Carstens1-2/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-12-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds5-10/+124
Pull s390 updates from Martin Schwidefsky: "The most notable change for this pull request is the ftrace rework from Heiko. It brings a small performance improvement and the ground work to support a new gcc option to replace the mcount blocks with a single nop. Two new s390 specific system calls are added to emulate user space mmio for PCI, an artifact of the how PCI memory is accessed. Two patches for the memory management with changes to common code. For KVM mm_forbids_zeropage is added which disables the empty zero page for an mm that is used by a KVM process. And an optimization, pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full. Some micro optimization for the cmpxchg and the spinlock code. And as usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/cputime: fix 31-bit compile s390/scm_block: make the number of reqs per HW req configurable s390/scm_block: handle multiple requests in one HW request s390/scm_block: allocate aidaw pages only when necessary s390/scm_block: use mempool to manage aidaw requests s390/eadm: change timeout value s390/mm: fix memory leak of ptlock in pmd_free_tlb s390: use local symbol names in entry[64].S s390/ptrace: always include vector registers in core files s390/simd: clear vector register pointer on fork/clone s390: translate cputime magic constants to macros s390/idle: convert open coded idle time seqcount s390/idle: add missing irq off lockdep annotation s390/debug: avoid function call for debug_sprintf_* s390/kprobes: fix instruction copy for out of line execution s390: remove diag 44 calls from cpu_relax() s390/dasd: retry partition detection s390/dasd: fix list corruption for sleep_on requests s390/dasd: fix infinite term I/O loop s390/dasd: remove unused code ...
2014-11-28s390/pci: Deletion of unnecessary checks before the function call "debug_unregister"Markus Elfring1-5/+2
The debug_unregister() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-23PCI/MSI: Rename mask/unmask_msi_irq treewideThomas Gleixner1-2/+2
The PCI/MSI irq chip callbacks mask/unmask_msi_irq have been renamed to pci_msi_mask/unmask_irq to mark them PCI specific. Rename all usage sites. The conversion helper functions are kept around to avoid conflicts in next and will be removed after merging into mainline. Coccinelle assisted conversion. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: x86@kernel.org Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Mohit Kumar <mohit.kumar@st.com> Cc: Simon Horman <horms@verge.net.au> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yijing Wang <wangyijing@huawei.com>
2014-11-23PCI/MSI: Rename mask/unmask_msi_irq et alThomas Gleixner1-2/+2
mask/unmask_msi_irq and __mask_msi/msix_irq are PCI/MSI specific functions and should be named accordingly. This is a preparatory patch to support MSI on non PCI devices. Rename mask/unmask_msi_irq to pci_msi_mask/unmask_irq and document the functions. Provide conversion helpers. Rename __mask_msi/msix_irq to __pci_msi/msix_desc_mask so its clear that they operated on msi_desc. Fixup the only user outside of pci/msi. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2014-11-23PCI/MSI: Rename write_msi_msg() to pci_write_msi_msg()Jiang Liu1-1/+1
Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI specific. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-19s390/kernel: add system calls for PCI memory accessAlexey Ishchuk2-1/+116
Add the new __NR_s390_pci_mmio_write and __NR_s390_pci_mmio_read system calls to allow user space applications to access device PCI I/O memory pages on s390x platform. [ Martin Schwidefsky: some code beautification ] Signed-off-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-11s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()Yijing Wang1-2/+2
Now only s390/MSI use default_msi_mask_irq() and default_msix_mask_irq(), replace them with the common MSI mask IRQ functions __msi_mask_irq() and __msix_mask_irq(). Remove default_msi_mask_irq() and default_msix_mask_irq(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: linux-s390@vger.kernel.org
2014-11-03s390/pci: add sparse annotationsMartin Schwidefsky1-2/+4
Fix the following warnings from the sparse code checker: arch/s390/include/asm/pci_io.h:165:49: warning: cast removes address space of expression arch/s390/pci/pci.c:476:44: warning: cast removes address space of expression arch/s390/pci/pci.c:491:36: warning: incorrect type in argument 2 (different address spaces) arch/s390/pci/pci.c:491:36: expected void [noderef] <asn:2>*addr arch/s390/pci/pci.c:491:36: got void *<noident> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/pci: improve irq number check for msixSebastian Ott2-2/+2
s390s arch_setup_msi_irqs function ensures that we don't return with more irqs than the PCI architecture allows and that a single PCI function doesn't consume more irqs than the kernel is configured for. At least the last check doesn't help much and should take the sum of all irqs into account. Since that's already done by irq_alloc_desc we can remove this check. As for the first check we should use the value provided by the firmware which can be less than what the PCI architecture allows. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/pci: introduce lazy IOTLB flushing for DMA unmapGerald Schaefer1-14/+36
This changes the default IOTLB flushing method to lazy flushing, which means that there will be no direct flush after each DMA unmap operation. Instead, the iommu bitmap pointer will be adjusted after unmap, so that no DMA address will be re-used until after an iommu bitmap wrap-around. The only IOTLB flush will then happen after each wrap-around. A new kernel parameter "s390_iommu=" is also introduced, to allow changing the flushing behaviour to the old strict method. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22s390/pci: fix kmsg componentGerald Schaefer5-10/+10
KMSG_COMPONENT has to be defined instead of COMPONENT. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-16s390/MSI: Use standard mask and unmask funtionsYijing Wang1-43/+6
MSI irqchip in s390 has its own mask and unmask MSI irq functions, zpci_enable_irq() and zpci_disable_irq(). They mask and unmask MSI irq in standard ways, no arch special. MSI driver provides two global standard functions mask_msi_irq() and unmask_msi_irq(). Local zpci_enable_irq() and zpci_disable_irq() are almost the same as the standard two. the difference is local mask/unmask functions read the mask status before mask and unmask everytime. Then change the value and rewrite to hardware. In standard functions, save the mask status after mask and unmask msi irq, and use the cached status to change the mask status. When we mask or unmask a MSI irq, we always cache its mask status except we know need not to cache it, like in pci_msi_shutdown. So use the standard functions to replace the local is safe. Signed-off-by: Yijing Wang <wangyijing@huawei.com> [sebott: fixed inverted function pointers] Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.