aboutsummaryrefslogtreecommitdiffstats
path: root/arch/s390 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds74-548/+552
Pull s390 updates from Martin Schwidefsky: - New entropy generation for the pseudo random number generator. - Early boot printk output via sclp to help debug crashes on boot. This needs to be enabled with a kernel parameter. - Add proper no-execute support with a bit in the page table entry. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits) s390/syscall: fix single stepped system calls s390/zcrypt: make ap_bus explicitly non-modular s390/zcrypt: Removed unneeded debug feature directory creation. s390: add missing "do {} while (0)" loop constructs to multiline macros s390/mm: add cond_resched call to kernel page table dumper s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG s390: replace ACCESS_ONCE with READ_ONCE s390: Audit and remove any remaining unnecessary uses of module.h s390: mm: Audit and remove any unnecessary uses of module.h s390: kernel: Audit and remove any unnecessary uses of module.h s390/kdump: Use "LINUX" ELF note name instead of "CORE" s390: add no-execute support s390: report new vector facilities s390: use correct input data address for setup_randomness s390/sclp: get rid of common response code handling s390/sclp: don't add new lines to each printed string s390/sclp: make early sclp code readable s390/sclp: disable early sclp code as soon as the base sclp driver is active s390/sclp: move early printk code to drivers ...
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-27/+2
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds2-6/+2
Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
2017-02-21bpf: fix unlocking of jited image when module ronx not setDaniel Borkmann1-1/+1
Eric and Willem reported that they recently saw random crashes when JIT was in use and bisected this to 74451e66d516 ("bpf: make jited programs visible in traces"). Issue was that the consolidation part added bpf_jit_binary_unlock_ro() that would unlock previously made read-only memory back to read-write. However, DEBUG_SET_MODULE_RONX cannot be used for this to test for presence of set_memory_*() functions. We need to use ARCH_HAS_SET_MEMORY instead to fix this; also add the corresponding bpf_jit_binary_lock_ro() to filter.h. Fixes: 74451e66d516 ("bpf: make jited programs visible in traces") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: Willem de Bruijn <willemb@google.com> Bisected-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21arch: add ARCH_HAS_SET_MEMORY configDaniel Borkmann1-0/+1
Currently, there's no good way to test for the presence of set_memory_ro/rw/x/nx() helpers implemented by archs such as x86, arm, arm64 and s390. There's DEBUG_SET_MODULE_RONX and DEBUG_RODATA, however both don't really reflect that: set_memory_*() are also available even when DEBUG_SET_MODULE_RONX is turned off, and DEBUG_RODATA is set by parisc, but doesn't implement above functions. Thus, add ARCH_HAS_SET_MEMORY that is selected by mentioned archs, where generic code can test against this. This also allows later on to move DEBUG_SET_MODULE_RONX out of the arch specific Kconfig to define it only once depending on ARCH_HAS_SET_MEMORY. Suggested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20s390/syscall: fix single stepped system callsMartin Schwidefsky1-0/+1
Fix PER tracing of system calls after git commit 34525e1f7e8dc478 "s390: store breaking event address only for program checks" broke it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17bpf: make jited programs visible in tracesDaniel Borkmann1-18/+0
Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17bpf: remove stubs for cBPF from arch codeDaniel Borkmann1-8/+0
Remove the dummy bpf_jit_compile() stubs for eBPF JITs and make that a single __weak function in the core that can be overridden similarly to the eBPF one. Also remove stale pr_err() mentions of bpf_jit_compile. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17s390: add missing "do {} while (0)" loop constructs to multiline macrosHeiko Carstens3-8/+8
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390/mm: add cond_resched call to kernel page table dumperHeiko Carstens1-0/+2
Walking kernel page tables within the kernel page table dumper may potentially take a lot of time. This may lead to soft lockup warning messages. To avoid this add a cond_resched call for each pgd_level iteration. This is the same as "x86/mm/ptdump: Fix soft lockup in page table walker" for x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGEHeiko Carstens4-6/+3
Both MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE are just an alias for MACHINE_HAS_EDAT1. So simply use MACHINE_HAS_EDAT1 instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUGHeiko Carstens1-9/+9
Fix this compile error for !MEMORY_HOTPLUG && NUMA: arch/s390/built-in.o: In function `emu_setup_size_adjust': arch/s390/numa/mode_emu.c:477: undefined reference to `memory_block_size_bytes' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: replace ACCESS_ONCE with READ_ONCEChristian Borntraeger3-9/+9
Remove the last places of ACCESS_ONCE in s390 code. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: Audit and remove any remaining unnecessary uses of module.hPaul Gortmaker6-5/+7
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. An instance where module_param was used without moduleparam.h was also fixed, as well as implicit use of ptrace.h and string.h headers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: mm: Audit and remove any unnecessary uses of module.hPaul Gortmaker7-6/+4
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. An instance where module_param was used without moduleparam.h was also fixed, as well as an implict use of asm/elf.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: kernel: Audit and remove any unnecessary uses of module.hPaul Gortmaker17-18/+20
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390/kdump: Use "LINUX" ELF note name instead of "CORE"Michael Holzheu1-1/+5
In binutils/libbfd (bfd/elf.c) it is enforced that all s390 specific ELF notes like e.g. NT_S390_PREFIX or NT_S390_CTRS have "LINUX" specified as note name. Otherwise the notes are ignored. For /proc/vmcore we currently use "CORE" for these notes. Up to now this has not been a real problem because the dump analysis tool "crash" does not check the note name. But it will break all programs that use libbfd for processing ELF notes. So fix this and use "LINUX" for all s390 specific notes to comply with libbfd. Cc: stable@vger.kernel.org # v4.4+ Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390: add no-execute supportMartin Schwidefsky15-132/+277
Bit 0x100 of a page table, segment table of region table entry can be used to disallow code execution for the virtual addresses associated with the entry. There is one tricky bit, the system call to return from a signal is part of the signal frame written to the user stack. With a non-executable stack this would stop working. To avoid breaking things the protection fault handler checks the opcode that caused the fault for 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) and injects a system call. This is preferable to the alternative solution with a stub function in the vdso because it works for vdso=off and statically linked binaries as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390: report new vector facilitiesMartin Schwidefsky3-2/+10
Add hardware capability bits and feature tags to /proc/cpuinfo for the "Vector Packed Decimal Facility" (tag "vxd" / hwcap bit 2^12) and the "Vector Enhancements Facility 1" (tag "vxe" / hwcap bit 2^13). Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390: use correct input data address for setup_randomnessHeiko Carstens1-1/+1
The current implementation of setup_randomness uses the stack address and therefore the pointer to the SYSIB 3.2.2 block as input data address. Furthermore the length of the input data is the number of virtual-machine description blocks which is typically one. This means that typically a single zero byte is fed to add_device_randomness. Fix both of these and use the address of the first virtual machine description block as input data address and also use the correct length. Fixes: bcfcbb6bae64 ("s390: add system information as device randomness") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: don't add new lines to each printed stringHeiko Carstens2-3/+6
The early vt220 sclp printk code added an extra new line to each printed multi-line text. If used for the early sclp console this will lead to numerous extra new lines. Therefore get rid of this semantic and require that each to be printed string contains a line feed character if a new line is wanted. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: make early sclp code readableHeiko Carstens6-15/+16
This patch - unifies the old sclp early code and the sclp early printk code, so they can use common functions - makes sure all sclp early functions and variables have the same "sclp_early" prefix - converts the sclp early printk code into readable code by using existing data structures instead of hard coded magic arrays - splits the early sclp code into two files: sclp_early.c and sclp_early_core.c. The core file contains everything that is required by the kernel decompressor and may not call functions not contained within the core file. Otherwise the result would be a link error. - changes interrupt handling to be completely synchronous. The old early sclp code had a small window which allowed to receive several interrupts instead of exactly the single expected interrupt. This did hide a subtle potential bug, which is fixed with this large rework. - contains a couple of small cleanups. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-08s390/sclp: move early printk code to driversHeiko Carstens3-222/+4
Move the early sclp printk code to the drivers folder where also the rest of the sclp code can be found. This way it is possible to use the sclp private header files for further cleanups. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-07arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be commonLaura Abbott2-6/+2
There are multiple architectures that support CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX. These options also now have the ability to be turned off at runtime. Move these to an architecture independent location and make these options def_bool y for almost all of those arches. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-02-07s390/debug: make debug event time stamps relative to the boot TOD clockMartin Schwidefsky3-16/+8
The debug features currently uses absolute TOD time stamps for the debug events. Given that the TOD clock can jump forward and backward due to STP sync checks the order of debug events can get obfuscated. Replace the absolute TOD time stamps with a delta to the IPL time stamp. On a STP sync check the TOD clock correction is added to the IPL time stamp as well to make the deltas unaffected by STP sync check. The readout of the debug feature entries will convert the deltas back to absolute time stamps based on the Unix epoch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-07s390/topology: correct allocation of topology informationMartin Schwidefsky1-1/+1
The data stored by the STSI instruction can be up to a page in size but the memblock_virt_alloc allocation for tl_info only specifies 16 bytes. The memory after the short allocation is overwritten every time arch_update_cpu_topology is called. Fixes: 8c9105802235 "s390/numa: establish cpu to node mapping early" Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-07s390: make setup_randomness workHeiko Carstens1-3/+3
Commit bcfcbb6bae64 ("s390: add system information as device randomness") intended to add some virtual machine specific information to the randomness pool. Unfortunately it uses the page allocator before it is ready to use. In result the page allocator always returns NULL and the setup_randomness function never adds anything to the randomness pool. To fix this use memblock_alloc and memblock_free instead. Fixes: bcfcbb6bae64 ("s390: add system information as device randomness") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-01s390, sched/cputime: Remove unused cputime definitionsFrederic Weisbecker1-107/+0
Since the core doesn't deal with cputime_t anymore, most of these APIs have been left unused. Lets remove these. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-34-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01s390, sched/cputime: Make arch_cpu_idle_time() to return nsecsFrederic Weisbecker2-3/+4
This way we don't need to deal with cputime_t details from the core code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-32-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Push time to account_system_time() in nsecsFrederic Weisbecker2-4/+4
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-25-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Push time to account_idle_time() in nsecsFrederic Weisbecker1-1/+1
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-24-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Push time to account_steal_time() in nsecsFrederic Weisbecker1-1/+1
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-23-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Push time to account_user_time() in nsecsFrederic Weisbecker1-1/+1
This is one more step toward converting cputime accounting to pure nsecs. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-22-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Convert task/group cputime to nsecsFrederic Weisbecker1-3/+3
Now that most cputime readers use the transition API which return the task cputime in old style cputime_t, we can safely store the cputime in nsecs. This will eventually make cputime statistics less opaque and more granular. Back and forth convertions between cputime_t and nsecs in order to deal with cputime_t random granularity won't be needed anymore. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-8-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01sched/cputime: Convert kcpustat to nsecsFrederic Weisbecker1-8/+8
Kernel CPU stats are stored in cputime_t which is an architecture defined type, and hence a bit opaque and requiring accessors and mutators for any operation. Converting them to nsecs simplifies the code and is one step toward the removal of cputime_t in the core code. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-01Merge branch 'linus' into sched/core, to pick up fixes and refresh the branchIngo Molnar8-54/+84
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-31s390: store breaking event address only for program checksMartin Schwidefsky1-38/+12
The principles of operations specifies that the breaking event address is stored to the address 0x110 in the prefix page only for program checks. The last branch in user space is lost as soon as a branch in kernel space is executed after e.g. an svc. This makes it impossible to accurately maintain the breaking event address for a user space process. Simplify the code, just copy the current breaking event address from 0x110 to the task structure for program checks from user space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/prng: Adjust generation of entropy to produce real 256 bits.Harald Freudenberger1-16/+24
The generate_entropy function used a sha256 for compacting together 256 bits of entropy into 32 bytes hash. However, it is questionable if a sha256 can really be used here, as potential collisions may reduce the max entropy fitting into a 32 byte hash value. So this batch introduces the use of sha512 instead and the required buffer adjustments for the calling functions. Further more the working buffer for the generate_entropy function has been widened from one page to two pages. So now 1024 stckf invocations are used to gather 256 bits of entropy. This has been done to be on the save side if the jitters of stckf values isn't as good as supposed. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/crypto: Extend key length check for AES-XTS in fips mode.Harald Freudenberger1-0/+7
In fips mode only xts keys with 128 bit or 125 bit are allowed. This fix extends the xts_aes_set_key function to check for these valid key lengths in fips mode. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-31s390/crypto: Check des3_ede keys for uniqueness in fips modeMatthew Rosato1-0/+14
Triple-DES implementations will soon be required to check for uniqueness of keys with fips mode enabled. Add checks to ensure none of the 3 keys match. Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-24s390/mm: Fix cmma unused transfer from pgste into pteChristian Borntraeger1-3/+4
The last pgtable rework silently disabled the CMMA unused state by setting a local pte variable (a parameter) instead of propagating it back into the caller. Fix it. Fixes: ebde765c0e85 ("s390/mm: uninline ptep_xxx functions from pgtable.h") Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-24s390/ptrace: Preserve previous registers for short regset writeMartin Schwidefsky1-0/+8
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. convert_vx_to_fp() is adapted to handle only a specified number of registers rather than unconditionally handling all of them: other callers of this function are adapted appropriately. Based on an initial patch by Dave Martin. Cc: stable@vger.kernel.org Reported-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-2/+2
Pull KVM fixes from Radim Krčmář: "ARM: - Fix for timer setup on VHE machines - Drop spurious warning when the timer races against the vcpu running again - Prevent a vgic deadlock when the initialization fails (for stable) s390: - Fix a kernel memory exposure (for stable) x86: - Fix exception injection when hypercall instruction cannot be patched" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: do not expose random data via facility bitmap KVM: x86: fix fixing of hypercalls KVM: arm/arm64: vgic: Fix deadlock on error handling KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems KVM: arm/arm64: Fix occasional warning from the timer work function
2017-01-20KVM: s390: do not expose random data via facility bitmapChristian Borntraeger1-2/+2
kvm_s390_get_machine() populates the facility bitmap by copying bytes from the host results that are stored in a 256 byte array in the prefix page. The KVM code does use the size of the target buffer (2k), thus copying and exposing unrelated kernel memory (mostly machine check related logout data). Let's use the size of the source buffer instead. This is ok, as the target buffer will always be greater or equal than the source buffer as the KVM internal buffers (and thus S390_ARCH_FAC_LIST_SIZE_BYTE) cover the maximum possible size that is allowed by STFLE, which is 256 doublewords. All structures are zero allocated so we can leave bytes 256-2047 unchanged. Add a similar fix for kvm_arch_init_vm(). Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> [found with smatch] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-16s390/bpf: remove redundant check for non-null imageDaniel Borkmann1-7/+4
After we already allocated the jit.prg_buf image via bpf_jit_binary_alloc() and filled it out with instructions, jit.prg_buf cannot be NULL anymore. Thus, remove the unnecessary check. Tested on s390x with test_bpf module. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390: provide sclp based boot consoleHeiko Carstens5-10/+57
Use the early sclp code to provide a boot console. This boot console is available if the kernel parameter "earlyprintk" has been specified, just like it works for other architectures that also provide an early boot console. This makes debugging of early problems much easier, since now we finally have working console output even before memory detection is running. The boot console will be automatically disabled as soon as another console will be registered. Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/sclp: always stay within bounds of the early sccbHeiko Carstens1-1/+6
Make sure the _sclp_print_lm function stays within bounds of the early sccb, even if the passed string is very long. If the string is too long, the remaining characters will be dropped. Suggested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/sclp: make early sclp irq handler more robustHeiko Carstens2-6/+13
Make the early sclp interrupt handler more robust: - disable all interrupt sub classes except for the service signal subclass - extend ctlreg0 union so it is easily possible to set the service signal subclass mask bit without using a magic number - disable lowcore protection before writing to it - make sure that all write accesses are done before the original content of control register 0 is restored, which could enable lowcore protection Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390/topology: make "topology=off" parameter workHeiko Carstens2-9/+14
The "topology=off" kernel parameter is supposed to prevent the kernel to use hardware topology information to generate scheduling domains etc. For an unknown reason I implemented this in a very odd way back then: instead of simply clearing the MACHINE_HAS_TOPOLOGY flag within the lowcore I added a second variable which indicated that topology information should not be used. This is more than suboptimal since it partially doesn't work. For the fake NUMA case topology information is still considered and scheduling domains will be created based on this. To fix this and to simplify the code get rid of the extra variable and implement the "topology=off" case like it is done for other features. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-01-16s390: use false/true when using boolHeiko Carstens2-2/+2
Yet another trivial patch to reduce the noise that coccinelle generates. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.