aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/se (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-11-07sh: Fix heartbeart on Solution Engine seriesNobuhiro Iwamatsu3-0/+17
Access size to LED is not added on Solution Engine series. LED doesn't work. Fixed this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off duplicate includes.Paul Mundt1-1/+0
Caught by the surprisingly not-entirely-useless 'includecheck'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30sh: Enable USBF on MS7722SE.Yoshihiro Shimoda1-2/+2
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-03sh: cleanup struct irqaction initializers.Thomas Gleixner1-2/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Handle non-SuperIO I/O ports.Paul Mundt1-0/+2
This fixes up the port calculation logic for non-SuperIO accesses, before these were always matching the MRSHPC base, now just make sure the original port is handed back if it's not in the I/O port range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: heartbeat needs 32-bit writes.Paul Mundt1-0/+1
Most boards use 8 or 16-bit access for the LED bank, se7206 needs 32. There's only 8 individual LEDs however, each with a 'special' value in terms of logical ordering. Go FPGA, go! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: se7206: Make the I/O port routines less stupid.Paul Mundt2-33/+4
The port routines were logically inverted, and the MRSHPC range had no upper bound, causing 8 and 16-bit port I/O to get mangled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up se7751 build.Paul Mundt1-1/+0
Trivial compile fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Fix up heartbeat build and resource size.Paul Mundt6-9/+9
We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: heartbeat driver update.Paul Mundt5-16/+24
Add some flags for the heartbeat driver, and kill off some duplication in the bit positions for the boards that don't have special cases. This also allows for variable access widths and inversion. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: simplify se7780 IRQ codeMagnus Damm1-27/+1
The new intc code handles IRQ3 and IRQ7 in the cpu specific code already, so there is no reason to duplicate that here. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm4-387/+0
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25sh: remove support for sh73180 and solution engine 73180Magnus Damm4-484/+0
This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: clean up interrupt code for solution engine 7722 boardMagnus Damm2-68/+33
This patch cleans up solution engine 7722 specific interrupt code. The main purpose is to replace the mux function with use of set_irq_chained_handler() and replace hard coded register poking code with set_irq_type(). The board specific interrupts are also moved to start from SE7722_FPGA_IRQ_BASE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: rework ipr codeMagnus Damm3-110/+88
This patch reworks the ipr code by grouping the offset array together with the ipr_data structure in a new data structure called ipr_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. This strategy has much in common with the recently merged intc2 code. One logic change has been made - the original ipr code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: rework intc2 codeMagnus Damm1-31/+14
The shared intc2 code currently contains cpu-specific #ifdefs. This is a tad unclean and it prevents us from using the shared code to drive board-specific irqs on the se7780 board. This patch reworks the intc2 code by moving the base addresses of the intc2 registers into struct intc2_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. One logic change has been made - the original shared intc2 code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off machvec aliases.Paul Mundt9-18/+9
We now throw all of the machvecs in to .machvec.init and either select one on the command line, or copy out the first (and usually only) one to sh_mv. The rest are freed as usual. This gets rid of all of the silly sh_mv aliasing and makes the selection explicit rather than link-order dependent. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-04sh: Fix se73180 platform device registration.Paul Mundt1-2/+2
Copy and paste error from se7343, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09fix file specification in commentsUwe Kleine-König1-1/+1
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-07sh: Solution Engine 7722 board support.Ryusuke Sakato3-0/+259
This adds more full-featured support for the SH7722 Solution Engine. Previously this was using the generic board, and lacked most of the peripheral support. Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Solution Engine SH7705 board and CPU updates.Nobuhiro Iwamatsu2-17/+17
This fixes up SH7705 CPU support and the SE7705 board for some of the recent changes. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7780 Solution Engine board support.Nobuhiro Iwamatsu3-0/+221
This adds support for the SH7780-based Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: MS7712SE01 board support.Nobuhiro Iwamatsu3-14/+19
Support the SH7712 (SH3-DSP) Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: pata_platform pcmcia support for SolutionEngine boards.Nobuhiro Iwamatsu1-0/+26
This enables pata_platform support for the PCMCIA slot on the SolutionEngine. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Bring kgdb back from the dead.Paul Mundt1-148/+0
This code has suffered quite a bit of bitrot, do some basic tidying to get it to a reasonably functional state again. This gets the basic support and the console working again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: heartbeat consolidation for banked LEDs.Paul Mundt18-353/+166
This consolidates the various board heartbeat LED implementations, used for strobing the load average across a LED bank. Those boards not implementing a full bank can hook in via the LED class. We leave the compat hook in the machvec for now until those non-banked boards are able to migrate to the drivers/leds. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Solution Engine 770x IPR irq setup.Nobuhiro Iwamatsu2-41/+75
Fixups for external IPR IRQs for the SE770x FPGA. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Kill off unused SE7619 I/O ops.Yoshinori Sato3-124/+1
This can use the generic routines, so kill off the board-specific ones. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fix Solution Engine 7619 build.Yoshinori Sato2-33/+33
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: IPR IRQ updates for SH7619/SH7206.Yoshinori Sato1-4/+12
This updates the SH7619 and SH7206 code for the IPR IRQ changes. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: SE7206 build fixes.Paul Mundt2-35/+12
A number of API changes happened underneath the 7206 patches, update for everything that broke. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for Solution Engine 7206 and 7619 boards.Yoshinori Sato8-0/+578
This adds support for the Solution Engine 7206 and 7619. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31sh: Fix IPR-IRQ's for IRQ-chip change breakage.Jamie Lenehan5-149/+173
The conversion from IPR-IRQ to IRQ-chip resulted in the ipr data being allocated in a local variable in make_ipr_irq - breaking anything using IPR interrupts. This changes all of the callers of make_ipr_irq to allocate a static structure containing the IPR data which is then passed to make_ipr_irq. This removes the need for make_ipr_irq to allocate any additional space for the IPR information. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03fix file specification in commentsUwe Zeisberger3-3/+3
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03sh: Kill off remaining config.h references.Paul Mundt4-7/+0
A few of these managed to sneak back in, get rid of them once and for all. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03sh: build fixes for defconfigs.Paul Mundt3-10/+5
Get all of the defconfigs building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: machvec rework.Paul Mundt8-225/+89
Some more machvec overhauling and setup code cleanup. Kill off get_system_type() and platform_setup(), we can do these both through the machvec. While we're add it, kill off more useless mach.c's and drop some legacy cruft from setup.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Solution Engine SH7343 board support.Paul Mundt5-0/+605
This adds support for the SE7343 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Consolidated SH7751/SH7780 PCI support.Paul Mundt2-131/+25
This cleans up quite a lot of the PCI mess that we currently have, and attempts to consolidate the duplication in the SH7780 and SH7751 PCI controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SE73180 updates for IRQ changes.Paul Mundt1-0/+2
SE73180 can use the generic support, we just need to wire up the IRQ demuxing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Board updates for I/O routine rework.Paul Mundt15-107/+37
This updates the various boards for some of the recent I/O routine updates. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Kill off dead code for SE and SystemH boards.Paul Mundt7-57/+11
Some of these have suffered some bitrot, and so there is some degree of dead code that has been left sitting around, clean it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Move smc37c93x.h for SystemH board use.Paul Mundt1-1/+1
SystemH needs this header as well, not just 770x SE. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel17-17/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29[PATCH] genirq: rename desc->handler to desc->chipIngo Molnar1-1/+1
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds23-0/+2339
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.