aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-09-25sh: add FSI driver support for ms7724seKuninori Morimoto1-0/+89
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24sh: mach-ecovec24: Add active low setting for sh_ethKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-19V4L/DVB (12509): sh: prepare board-ap325rxa.c for v4l2-subdev conversionGuennadi Liakhovetski1-2/+12
We will be registering and unregistering the soc_camera_platform platform device multiple times, therefore we need a .release() method and have to nullify the kobj. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12507): sh: soc-camera updatesGuennadi Liakhovetski1-1/+2
Update ap325rxa to specify .bus_id in struct soc_camera_link explicitly, remove unused .iface from struct soc_camera_platform_info. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12505): soc_camera_platform: pass device pointer from soc-camera core on .add_device()Guennadi Liakhovetski1-0/+2
Add a struct device pointer to struct soc_camera_platform_info and let the user (ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12504): soc-camera: prepare soc_camera_platform.c and its users for conversionGuennadi Liakhovetski1-11/+32
soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch converts soc_camera_platform.c and its users for the soc-camera platform- device conversion and also extends soc-camera core to handle non-I2C cameras. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-17sh: mach-ecovec24: Add user debug switch supportKuninori Morimoto1-0/+10
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy5-5/+5
Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: need asm/clock.h.Kuninori Morimoto1-0/+1
Fixes up build failures. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: deassert usb irq on boot.Kuninori Morimoto1-0/+1
This patch prevents the USB1 interrupt from remaining asserted immediately after re-boot or during a jump in to a secondary kernel. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: Add KEYSC support for EcoVec24Kuninori Morimoto1-0/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)Yusuke Goda1-1/+1
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: add HIZA setting for LEDKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: write MAC address in bootKuninori Morimoto1-2/+79
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add romImage support for EcoVec24Kuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add I2C device support for EcoVec24Kuninori Morimoto1-1/+12
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: Fix up build warning for SH7785LCR proto board.Paul Mundt1-1/+1
This fixes up a build warning introduced by the proto board resource changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: disable trapped I/O on SH7785LCR.Paul Mundt1-1/+0
This board doesn't use trapped I/O for anything, so just kill off the select. This was causing problems in the unhandled page fault die path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28sh: sh7785lcr: fix prototype board on 32bit MMU mode.Yoshihiro Shimoda2-0/+25
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add LCDC Panel support for EcoVec24Kuninori Morimoto1-2/+28
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add CEU support for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add support LCDC for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add USB support for EcoVec24Kuninori Morimoto1-0/+97
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add SH-ETH support for EcoVec24Kuninori Morimoto1-1/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: modify to enable boot for EcoVec24Kuninori Morimoto1-19/+14
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23Merge branches 'sh/hwblk' and 'sh/pm-runtime'Paul Mundt5-0/+43
2009-08-21sh: i2c compile fix for kfr2r09Magnus Damm1-0/+7
Fix the kfr2r09 board code so it compiles if CONFIG_I2C=n. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20Merge branch 'sh/r8a66597-udc'Paul Mundt2-0/+136
2009-08-20sh: add r8a66597 usb1 gadget to the se7724 boardMagnus Damm1-0/+33
Add USB gadget support for port CN26 on the Solution Engine 7724 board. The r8a66597-udc driver is hooked up as a platform device and some registers are configured to enable the USB in gadget mode. The hardware driving the USB port is the on-chip USB1 block in the sh7724 processor configured as USB gadget controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: add r8a66597 usb0 gadget to the kfr2r09 boardMagnus Damm1-0/+103
Add USB gadget support for port YC301 on the KFR2R09 board. The r8a66597-udc driver is hooked up as a platform device, clocks are enabled via I2C and some registers are configured to enable the USB in gadget mode. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB gadget controller. This board is using external hardware to detect USB hotplug events and allows the processor to dynamically start and stop clocks. This well thought out hardware feature is unused at this point and plug and play is unfortunately unsupported. To properly support all hardware features the USB gadget stack may need some adjustment. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Add EcoVec (SH7724) board supportKuninori Morimoto3-0/+145
This adds preliminary support for the EcoVec board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-19sh: USB0 resource area fix for ms7724seKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Runtime PM pdev hwblk - kfr2r09 LCDCMagnus Damm1-0/+3
This patch simply adds LCDC hwblk_id data for the kfr2r09 board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15Merge branch 'master' into sh/hwblkPaul Mundt6-16/+501
2009-08-15Merge branch 'sh/stable-updates'Paul Mundt1-4/+5
2009-08-15sh: use in-soc KEYSC on se7724Magnus Damm1-4/+5
This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13Merge branch 'sh/stable-updates'Paul Mundt2-2/+2
2009-08-13sh: fix i2c init order on ap325rxa V2Magnus Damm1-1/+1
Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13sh: fix i2c init order on Migo-R V2Magnus Damm1-1/+1
Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: LED9, LED10 and LED11 support for Solution Engine 7724Magnus Damm1-0/+26
This patch adds support for LED9, LED10 and LED11 on the Solution Engine 7724 board. If CONFIG_PM is enabled then these LEDs are used to show the hardware sleep mode used by the processor. Useful to debug cpuidle. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: kfr2r09 board support - NAND flashMagnus Damm1-0/+23
This patch adds support for the NAND flash chip attached to CS4 on the KFR2R09 board. The device is driven by the platform device driver "onenand-flash". Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: kfr2r09 board support - LCDC panelMagnus Damm3-0/+427
This patch adds support for the WQVGA LCD display used by the KFR2R09 board. The LCD module is a TX07D34VM0AAA made by Hitachi, and this module is made up by a R61517 chip together with a 240x400 pixel display. The screen is attached to the SuperH Mobile LCDC using a 18-bit SYS bus. The register settings used by the SYS panel setup code are based on an out-of-tree driver which apart from duplicating all LCDC driver code and writing to non-existing hardware registers also never was posted for upstream merge. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Solution Engine 7724Magnus Damm1-0/+18
Add hwblk_id to Solution Engine 7724 board specific on-chip sh7724 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - kfr2r09Magnus Damm1-0/+3
Add hwblk_id to kfr2r09 board specific on-chip sh7724 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - AP325RXAMagnus Damm1-0/+6
Add hwblk_id to AP325RXA board specific on-chip sh7723 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Solution Engine 7722Magnus Damm1-0/+4
Add hwblk_id to Solution Engine 7722 board specific on-chip sh7722 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Migo-RMagnus Damm1-0/+9
Add hwblk_id to Migo-R board specific on-chip sh7722 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: ms7724se: add 1280x720 lcdc output supportKuninori Morimoto1-10/+18
There was no big meaning in the support of SVGA, but 720p support is necessary for ms7724se board. So, this patch support 720p instead of SVGA. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23Merge branch 'sh/kfr2r09'Paul Mundt3-0/+161
2009-07-23sh: kfr2r09 board support - KEYSC keypadMagnus Damm1-0/+53
This patch adds KEYSC keypad support to the kfr2r09 board. The keys driven by the sh7724 on-chip KEYSC block are described as a platform device and platform data for the sh_keysc driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.