aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-01-12sh: mach-se: Convert SE7343 FPGA to dynamic IRQ allocation.Paul Mundt2-20/+31
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA interrupt controller and switches over to a completely dynamic set. No assumptions regarding a contiguous range are made, and the platform resources themselves need to be filled in lazily. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24sh: mach-ecovec24: setup.c detailed correctionKuninori Morimoto1-2/+2
o remove unused define o add device name comment Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds6-6/+350
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits) sh: Fix test of unsigned in se7722_irq_demux() sh: mach-ecovec24: Add FSI sound support sh: mach-ecovec24: Add mt9t112 camera support sh: mach-ecovec24: Add tw9910 support sh: MSIOF/mmc_spi platform data for the Ecovec24 board sh: ms7724se: Add ak4642 support sh: Fix up FPU build for SH5 sh: Remove old early serial console code V2 sh: sh5 scif pdata (sh5-101/sh5-103) sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3) sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724) sh: sh4 scif pdata (sh7750/sh7760/sh4-202) sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720) sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg) sh: sh2 scif pdata (sh7616) sh-sci: Extend sh-sci driver with early console V2 sh: Stub in P3 ioremap support for nommu parts. sh: wire up vmallocinfo support in ioremap() implementations. sh: Make the unaligned trap handler always obey notification levels. sh: Couple kernel and user write page perm bits for CONFIG_X2TLB ...
2009-12-16V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict sizes, add platform dataGuennadi Liakhovetski1-2/+11
It has been experimentally found out, that the sensor only supports up to 512x384 video output and also has some restrictions on minimum scale. We disable non-working size ranges until, maybe, someone finds out how to properly set them up. Also add cropping support, an auto white balance control, platform data to specify master clock frequency and polarity of the IOCTL pin. create mode 100644 include/media/rj54n1cb0c.h Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13659): soc-camera: convert to the new mediabus APIGuennadi Liakhovetski1-1/+2
Convert soc-camera core and all soc-camera drivers to the new mediabus API. This also takes soc-camera client drivers one step closer to also be usable with generic v4l2-subdev host drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in struct soc_camera_linkGuennadi Liakhovetski2-31/+39
After this change drivers can be further extended to not fail, if they don't get platform data, but to use defaults. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16sh: Fix test of unsigned in se7722_irq_demux()Roel Kluin1-3/+4
se7722_fpga_irq[] is unsigned so the test does not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add FSI sound supportKuninori Morimoto1-0/+98
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add mt9t112 camera supportKuninori Morimoto1-1/+78
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: mach-ecovec24: Add tw9910 supportKuninori Morimoto1-0/+50
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: MSIOF/mmc_spi platform data for the Ecovec24 boardMagnus Damm1-2/+95
This patch adds MSIOF and mmc_spi platform data for the CN11 port on the SuperH Ecovec24 board. No card detect interrupt is available so the MMC code is configured to poll. The WP signal is implemented together with CD and power control. The board only supports 3.3V power. The platform data is wrapped in SDHI #ifdefs to allow both the SDHI and the MSIOF to coexist. Only one configuration is allowed at a time. The pin routing is selected by a dip switch but we can unfortunately not detect this setting at run time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15sh: ms7724se: Add ak4642 supportKuninori Morimoto1-0/+17
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.33Paul Mundt2-0/+58
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds20-140/+939
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits) sh: include empty zero page in romImage sh: Make associative cache writes fatal on all SH-4A parts. sh: Drop associative writes for SH-4 cache flushes. sh: Partial revert of copy/clear_user_highpage() optimizations. sh: Add default uImage rule for se7724, ap325rxa, and migor. sh: allow runtime pm without suspend/resume callbacks sh: mach-ecovec24: Remove un-defined settings for VPU sh: mach-ecovec24: LCDC drive ability become high sh: fix sh7724 VEU3F resource size serial: sh-sci: Fix too early port disabling. sh: pfc: pr_info() -> pr_debug() cleanups. sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines. sh: Improve kfr2r09 serial port setup code sh: Break out SuperH PFC code sh: Move KEYSC header file sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file sh: Add CPG save/restore code for sh7724 R-standby sh: Add SDHI power control support to Ecovec mfd: Add power control platform data to SDHI driver sh: mach-ecovec24: modify address map ...
2009-12-09sh: mach-ap325rxa: Add SOCAM_DATA_ACTIVE_HIGH flags for soc-cameraKuninori Morimoto1-1/+2
Current soc-camera needs SOCAM_DATA_ACTIVE_xxx flags for use. We can not open old ncm03j camera device without this patch. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09sh: LCDC start_transfer() for the KFR2R09 boardMagnus Damm2-0/+7
This patch adds a ->start_transfer() callback to the KFR2R09 lcd handling code. The callback is used to notify the lcd controller that a new frame of data is about to be transferred. The callback is only used in combination with deferred io, but the code has been tested both with and without deferred io enabled. Without this patch the display data on the KFR2R09 lcd panel becomes corrupted over time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04Merge branch 'topic/asoc' into for-linusTakashi Iwai1-0/+3
2009-12-04sh: mach-ecovec24: LCDC drive ability become highKuninori Morimoto1-2/+2
Drive ability for LCDC become high for safety, became there is strange individual specificity board in mass production Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-01Merge branch 'topic/beep-rename' into topic/core-changeTakashi Iwai1-0/+55
2009-11-30sh: ms7724se: Add runtime PM support for FSIKuninori Morimoto1-0/+3
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30sh: Improve kfr2r09 serial port setup codeMagnus Damm1-0/+51
This patch improves the serial port communication quality of port YC401 on the KFR2R09 board. With this fix serial console is fine at 115200 - up and down keys now work as expected. Thanks to Hirohide Yamasaki for this fix. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Move KEYSC header fileMagnus Damm5-5/+5
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Add SDHI power control support to EcovecMagnus Damm1-6/+30
This patch adds support for SDHI power control to the Ecovec board. Platform data and power control callbacks for SDHI0 and SDHI1 are added. Power is by default off. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04ALSA: sh: add SuperH DAC audio driver for ALSA V4Rafael Ignacio Zurita1-0/+55
This is a port of the sound/oss/sh_dac_audio.c driver. The driver uses an on-chip 8-bit D/A converter, which has a speaker connected to one of its channels, found in several ancient HP machines. For interrupts it uses a high-resolution timer (hrtimer). Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx). Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver would be obsolete soon, and it could be removed. Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-04sh: Make sure indexes are positiveRoel Kluin2-2/+2
The indexes are signed, make sure they are not negative when we read array elements. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04sh: mach-se: Convert SE7722 FPGA to dynamic IRQ allocation.Paul Mundt2-18/+29
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA interrupt controller and witches over to a completely dynamic set. No assumptions regarding a contiguous range are made, and the platform resources themselves need to be filled in lazily. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02sh: Remove unused WP signal for SDHI0 and KFR2R09Magnus Damm1-1/+0
Get rid of the unused WP signal for SDHI0 on KFR2R09. This because yc304 on KFR2R09 is a Micro SD slot which does not implement the WP signal. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02sh: Add SDHI1 support to the AP325RXA boardMagnus Damm1-1/+35
Update the SDHI platform data for the AP325RXA board to include support for the CN7 Micro SD Card slot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add KFR2R09 specific memory pre/post R-standby codeMagnus Damm2-1/+30
Add R-standby support to the KFR2R09 sdram code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add Ecovec24 specific memory pre/post sleep codeMagnus Damm3-1/+67
Add self-refresh handling code for the Ecovec24 board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add ap325rxa specific memory pre/post sleep codeMagnus Damm3-1/+83
Add self-refresh handling code for the AP325RXA board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Move ap325rxa board code into separate directoryMagnus Damm3-1/+2
Move the AP325RXA board code from a single board file to a separate directory. This to make it easy to add support for sdram sleep mode code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add migor specific memory pre/post sleep codeMagnus Damm3-2/+82
Add self-refresh handling code for the Migo-R board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add ms7724se specific memory pre/post sleep codeMagnus Damm3-1/+65
Add self-refresh handling code for the MS7724SE board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30sh: Add kfr2r09 specific memory pre/post sleep codeMagnus Damm3-1/+66
Add self-refresh handling code for the KFR2R09 board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: mach-ecovec24: Add USB1 gadget supportKuninori Morimoto1-21/+17
USB1 can change to host/function by checking PTB3. This patch add USB1 gadget support and check PTB3 when boot, and change name to usb1_common_XXX from usb1_host_XXX. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: add SDHI1 support to ms7724seMagnus Damm1-0/+35
Add support for cn8 and SDHI1 to the ms7724se board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: mac address through private data for sh_eth on ms7724seMagnus Damm1-10/+4
Convert the ms7724se board code to pass the mac address to the sh_eth driver using platform data. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: mac address through private data for sh_eth on ecovec24Magnus Damm1-29/+4
Convert the ecovec24 board code to pass the mac address to the sh_eth driver using platform data. Also, remove the static clock to allow Runtime PM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: add hwblk_id to sh_eth on ecovec24Magnus Damm1-0/+3
Add HWBLK_ETHER to the sh_eth platform device to allow Runtime PM of the ethernet hardware. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26Merge branch 'sh/stable-updates'Paul Mundt2-13/+14
2009-10-26sh: rsk7203 CONFIG_MTD=n fixMagnus Damm2-13/+14
Fix the rsk7203 board code to build with CONFIG_MTD=n. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26Merge branch 'sh/sdhi-mfd'Paul Mundt5-49/+200
Conflicts: arch/sh/boards/mach-ecovec24/setup.c arch/sh/boards/mach-kfr2r09/setup.c
2009-10-26sh: mach-ecevec24: Add SDHI supportKuninori Morimoto1-0/+78
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: SDHI platform data to the kfr2r09 boardMagnus Damm1-0/+33
Add SD Card support to the kfr2r09 board using the sh_mobile_sdhi driver hooked up to SDHI0 and yc304. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: SDHI platform data to the SE7724 boardMagnus Damm1-0/+33
Add SD Card support to the se7724 board using the sh_mobile_sdhi driver hooked up to SDHI0 and CN7. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: SDHI platform data to the AP325RXA boardMagnus Damm1-24/+28
Convert the AP325 board to use sh_mobile_sdhi for the SD Card connected to CN3 instead of mmc_spi. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26sh: SDHI platform data to the Migo-R boardMagnus Damm1-24/+28
Convert the Migo-R board to use sh_mobile_sdhi for the SD Card connected to CN9 instead of mmc_spi. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16Merge branch 'sh/stable-updates'Paul Mundt1-6/+4
Conflicts: arch/sh/mm/cache-sh4.c
2009-10-16sh: Remove BKL from landisk gio.Thomas Gleixner1-6/+4
The open function got the BKL via the big push down. Replace it by preempt_enable/disable as this is sufficient for an UP machine. The ioctl can be unlocked because there is no functionality which requires serialization. The usage by multiple callers is broken with and without the BKL due to the local static variable addr. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.