aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-06-07sh: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in arch/sh/boards/mach-ecovec24/setup.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on ms7724seKuninori Morimoto1-4/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-migorKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ecovec24Kuninori Morimoto1-8/+8
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ap325rxaKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02Merge branch 'sh/iomap'Paul Mundt1-0/+3
2010-06-02sh: PIO disabling for x3proto and urquell.Paul Mundt1-0/+2
urquell only provides PIO in the PCI case, while the x3proto board never had a working PCIe controller, so it can simply disable it outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: mach-sdk7786: conditionally disable PIO support.Paul Mundt1-0/+1
SDK7786 only supports PIO via the PCI I/O space, so we disable PIO completely for the non-PCI case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-31sh: Add support MMCIF for ecovecYusuke Goda1-2/+84
This patch adds MMCIF platform data for the Ecovec board. Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-26sh: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in arch/sh/boards/mach-ecovec24/setup.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: disable SD-card write-protection detection on kfr2r09Guennadi Liakhovetski1-2/+4
kfr2r09 board has a micro-SD card slot, therefore card write-protection detection cannot work there, disable it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to migorGuennadi Liakhovetski1-0/+9
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to kfr2r09Guennadi Liakhovetski1-0/+9
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to ms7724seGuennadi Liakhovetski1-0/+17
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: Add SDHI DMA support to ecovecGuennadi Liakhovetski1-2/+7
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: add Video Output Unit (VOU) and AK8813 TV-encoder support to ms7724seGuennadi Liakhovetski1-8/+82
Add platform bindings, GPIO initialisation and allocation and AK8813 reset code to ms7724se. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22sh: add Video Output Unit and AK8813 video encoder support on ecovecGuennadi Liakhovetski1-0/+78
Ecovec uses the AK8813 video envoder similarly to the ms7724se platform with the only difference, that on ecovec GPIOs are used for resetting and powering up and down the chip. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: Check return value of clk_get on ms7724Kuninori Morimoto1-7/+11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: Check return value of clk_get on ecovec24Kuninori Morimoto1-9/+15
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: switch boards to clkdevMagnus Damm3-5/+11
This patch converts the remaining board clocks to use clkdev for lookup if needed. The unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-21sh: Move platform smp ops in to their own structure.Paul Mundt3-0/+13
This cribs the MIPS plat_smp_ops approach for wrapping up the platform ops. This will allow for mixing and matching different ops on the same platform in the future. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-19sh: mach-sdk7786: pm_power_off support.Paul Mundt1-0/+14
This wires up power-off support for the SDK7786 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: ms7724: Add tiny-document for soundKuninori Morimoto1-0/+8
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_initKuninori Morimoto1-0/+2
i2c_put_adapter is needed after i2c_get_adapter Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: Fix up ctrl_read/write stragglers in migor setup.Paul Mundt1-1/+1
ctrl_read/writeX are deprecated, this converts them over to their __raw_read/write() counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-02sh: audio support for the sh7722 Migo-R boardGuennadi Liakhovetski1-0/+16
Configure SIU port B pins and register the WM8978 audio codec. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds2-3/+3
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26soc-camera: ov772x: Modify buswidth controlKuninori Morimoto2-3/+3
This patch removes "buswidth" struct member, and sets the default buswidth to the natively supported 10 bit. You can select 8 bit buswidth by new flag. This patch also modify ap325rxa/migor setup.c Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26sh: remove dead LED code for migo-r and ms7724seMagnus Damm2-29/+0
CONFIG_PM is always set on SH-Mobile these days so get rid of the unused LED setup code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec build fix for CONFIG_I2C=nMagnus Damm1-0/+7
Allow building the ecovec board support code even though I2C support is disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ecovec r-standby supportMagnus Damm2-1/+61
This patch adds board specific r-standby resume code for ecovec. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-26sh: ms7724se r-standby supportMagnus Damm2-1/+81
This patch adds board specific r-standby resume code for ms7724se. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: modify scan_timing for KEYSCKuninori Morimoto1-1/+1
KEYSC::SCN register of SH7724 is 3bit. Thus, scan_timing should be 0 - 7 here. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: ms7724: Add sh_sir supportKuninori Morimoto1-0/+26
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25sh: mach-ecovec24: Add sh_sir supportKuninori Morimoto1-0/+27
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: sh7724: Update FSI/SPU2 clockKuninori Morimoto2-5/+15
When FSI and Network (= NFS file system) were used at the same time, the I/O of FSI was unstable. This patch updates the SPU2 clock (which is used for FSI) to solve this issue. Special thanks to Jeremy. Signed-off-by: Jeremy Baker <Jeremy.Baker@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: always enable sh7724 vpu_clk and set to 166MHz on EcovecMagnus Damm1-0/+5
Update the sh7724 processor code to always enable vpu_clk. On the Ecovec board, set the vpu_clk to 166 Mhz. The 166MHz setting results in a divide-by-6 setup for vpu_clk and improves the VPU performance compared to the power-on-reset/bootloader configuration. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7724/Ecovec24/KFR2R09/MS7724SE SDHI vector mergeMagnus Damm3-5/+5
Merge the SDHI vectors in the sh7724 INTC table and update the SDHI platform data for Ecovec24, KFR2R09 and MS7724SE. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7723/AP325 SDHI vector mergeMagnus Damm1-2/+2
Merge the SDHI vectors in the sh7723 INTC table and update the SDHI platform data for AP325. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: sh7722/Migo-R SDHI vector mergeMagnus Damm1-1/+1
Merge the SDHI vectors in the sh7722 INTC table and update the SDHI platform data for Migo-R. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-dreamcast: Convert to sparseirq.Paul Mundt2-17/+28
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02sh: mach-se: Convert SH7724 solution engine FPGA to sparseirq.Paul Mundt1-11/+27
This uses the new create_irq_nr() to build up the FPGA's desired virtual IRQ mapping and permits us to finally flip on sparseirq for this board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-02Merge branch 'sh/stable-updates'Paul Mundt1-1/+1
2010-01-30sh: mach-se: Fix up irq_desc reference.Paul Mundt1-1/+2
The irq_desc needs to be accessed with irq_to_desc(), this fixes up a build error with irq_desc being undefined. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-28sh: mach-titan: Kill off unused PIO port mangling.Paul Mundt4-135/+3
Nothing is using this, kill it off. Fixing up access sizes can be done with trapped I/O for anyone wanting to make use of this for devices that need it, everything else is already pure MMIO. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26sh: Mass ctrl_in/outX to __raw_read/writeX conversion.Paul Mundt49-359/+359
The old ctrl in/out routines are non-portable and unsuitable for cross-platform use. While drivers/sh has already been sanitized, there is still quite a lot of code that is not. This converts the arch/sh/ bits over, which permits us to flag the routines as deprecated whilst still building with -Werror for the architecture code, and to ensure that future users are not added. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Probe system FPGA area mapping.Paul Mundt1-4/+39
This implements dynamic probing for the system FPGA. The system reset controller contains a fixed magic read word in order to identify the FPGA. This just utilizes a simple loop that scans across all of the fixed physical areas (area 0 through area 6) to locate the FPGA. The FPGA also contains register information detailing the area mappings and chip select settings for all of the other blocks, so this needs to be done before we can set up anything else. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: reset controller reboot support.Paul Mundt1-0/+8
This wires up the machine_ops reboot call to use the system reset controller. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: Split out FPGA IRQ controller setup.Paul Mundt3-38/+52
This moves out the FPGA IRQ controller setup code to its own file, in preparation for switching off of IRL mode and having it provide its own irq_chip. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20sh: mach-sdk7786: FPGA updates.Paul Mundt3-70/+47
This does a bit of refactoring of the FPGA management code. The primary FPGA initialization is moved out to its own file in preparation for implementing some of the more complex capabilities, a complete set of register definitions is provided, and all of the existing users in the board code are moved over to use the new interface instead of setting up overlapping mappings. This also corrects the FPGA size, which previously was chomped off at the SDIF control register. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.