aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-09-17sh: mach-ecovec24: Add user debug switch supportKuninori Morimoto1-0/+10
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy5-5/+5
Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: need asm/clock.h.Kuninori Morimoto1-0/+1
Fixes up build failures. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: mach-ecovec24: deassert usb irq on boot.Kuninori Morimoto1-0/+1
This patch prevents the USB1 interrupt from remaining asserted immediately after re-boot or during a jump in to a secondary kernel. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: Add KEYSC support for EcoVec24Kuninori Morimoto1-0/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)Yusuke Goda1-1/+1
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: add HIZA setting for LEDKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: EcoVec24: write MAC address in bootKuninori Morimoto1-2/+79
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add romImage support for EcoVec24Kuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add I2C device support for EcoVec24Kuninori Morimoto1-1/+12
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: Fix up build warning for SH7785LCR proto board.Paul Mundt1-1/+1
This fixes up a build warning introduced by the proto board resource changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: disable trapped I/O on SH7785LCR.Paul Mundt1-1/+0
This board doesn't use trapped I/O for anything, so just kill off the select. This was causing problems in the unhandled page fault die path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28sh: sh7785lcr: fix prototype board on 32bit MMU mode.Yoshihiro Shimoda2-0/+25
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add LCDC Panel support for EcoVec24Kuninori Morimoto1-2/+28
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add CEU support for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add support LCDC for EcoVec24Kuninori Morimoto1-0/+109
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add USB support for EcoVec24Kuninori Morimoto1-0/+97
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Add SH-ETH support for EcoVec24Kuninori Morimoto1-1/+52
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: modify to enable boot for EcoVec24Kuninori Morimoto1-19/+14
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23Merge branches 'sh/hwblk' and 'sh/pm-runtime'Paul Mundt5-0/+43
2009-08-21sh: i2c compile fix for kfr2r09Magnus Damm1-0/+7
Fix the kfr2r09 board code so it compiles if CONFIG_I2C=n. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20Merge branch 'sh/r8a66597-udc'Paul Mundt2-0/+136
2009-08-20sh: add r8a66597 usb1 gadget to the se7724 boardMagnus Damm1-0/+33
Add USB gadget support for port CN26 on the Solution Engine 7724 board. The r8a66597-udc driver is hooked up as a platform device and some registers are configured to enable the USB in gadget mode. The hardware driving the USB port is the on-chip USB1 block in the sh7724 processor configured as USB gadget controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: add r8a66597 usb0 gadget to the kfr2r09 boardMagnus Damm1-0/+103
Add USB gadget support for port YC301 on the KFR2R09 board. The r8a66597-udc driver is hooked up as a platform device, clocks are enabled via I2C and some registers are configured to enable the USB in gadget mode. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB gadget controller. This board is using external hardware to detect USB hotplug events and allows the processor to dynamically start and stop clocks. This well thought out hardware feature is unused at this point and plug and play is unfortunately unsupported. To properly support all hardware features the USB gadget stack may need some adjustment. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Add EcoVec (SH7724) board supportKuninori Morimoto3-0/+145
This adds preliminary support for the EcoVec board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-19sh: USB0 resource area fix for ms7724seKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Runtime PM pdev hwblk - kfr2r09 LCDCMagnus Damm1-0/+3
This patch simply adds LCDC hwblk_id data for the kfr2r09 board. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15Merge branch 'master' into sh/hwblkPaul Mundt6-16/+501
2009-08-15Merge branch 'sh/stable-updates'Paul Mundt1-4/+5
2009-08-15sh: use in-soc KEYSC on se7724Magnus Damm1-4/+5
This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13Merge branch 'sh/stable-updates'Paul Mundt2-2/+2
2009-08-13sh: fix i2c init order on ap325rxa V2Magnus Damm1-1/+1
Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13sh: fix i2c init order on Migo-R V2Magnus Damm1-1/+1
Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: LED9, LED10 and LED11 support for Solution Engine 7724Magnus Damm1-0/+26
This patch adds support for LED9, LED10 and LED11 on the Solution Engine 7724 board. If CONFIG_PM is enabled then these LEDs are used to show the hardware sleep mode used by the processor. Useful to debug cpuidle. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: kfr2r09 board support - NAND flashMagnus Damm1-0/+23
This patch adds support for the NAND flash chip attached to CS4 on the KFR2R09 board. The device is driven by the platform device driver "onenand-flash". Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: kfr2r09 board support - LCDC panelMagnus Damm3-0/+427
This patch adds support for the WQVGA LCD display used by the KFR2R09 board. The LCD module is a TX07D34VM0AAA made by Hitachi, and this module is made up by a R61517 chip together with a 240x400 pixel display. The screen is attached to the SuperH Mobile LCDC using a 18-bit SYS bus. The register settings used by the SYS panel setup code are based on an out-of-tree driver which apart from duplicating all LCDC driver code and writing to non-existing hardware registers also never was posted for upstream merge. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Solution Engine 7724Magnus Damm1-0/+18
Add hwblk_id to Solution Engine 7724 board specific on-chip sh7724 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - kfr2r09Magnus Damm1-0/+3
Add hwblk_id to kfr2r09 board specific on-chip sh7724 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - AP325RXAMagnus Damm1-0/+6
Add hwblk_id to AP325RXA board specific on-chip sh7723 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Solution Engine 7722Magnus Damm1-0/+4
Add hwblk_id to Solution Engine 7722 board specific on-chip sh7722 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: Runtime PM pdev hwblk - Migo-RMagnus Damm1-0/+9
Add hwblk_id to Migo-R board specific on-chip sh7722 platform devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: ms7724se: add 1280x720 lcdc output supportKuninori Morimoto1-10/+18
There was no big meaning in the support of SVGA, but 720p support is necessary for ms7724se board. So, this patch support 720p instead of SVGA. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23Merge branch 'sh/kfr2r09'Paul Mundt3-0/+161
2009-07-23sh: kfr2r09 board support - KEYSC keypadMagnus Damm1-0/+53
This patch adds KEYSC keypad support to the kfr2r09 board. The keys driven by the sh7724 on-chip KEYSC block are described as a platform device and platform data for the sh_keysc driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23sh: kfr2r09 board support - NOR flashMagnus Damm1-1/+53
This patch adds NOR flash support to the kfr2r09 board. NOR flash support is added by describing the NOR flash chip hooked up to CS0 as platform device data for the physmap-flash MTD driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23sh: kfr2r09 board support - SCIF consoleMagnus Damm3-0/+56
This patch adds basic kfr2r09 board support. Only the SCIF1 console is supported with this patch, but this patch and a proper sh7724 configuration is all that is needed. Combine with an initramfs to have a small RAM based kernel and distribution booted as zImage from RAM via JTAG. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23usb: m66592-udc platform data on_chip supportMagnus Damm2-0/+14
Convert the m66592-udc driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness. This makes the code cleaner and also allows us to support both external and internal m66592 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip m66592 without modifying the Kconfig. The patch adds a m66592 header file for platform data and ties in platform data to the existing m66592 devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-20usb: r8a66597-hcd platform data on_chip supportMagnus Damm1-0/+1
Convert the r8a66597-hcd driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness. This makes the code cleaner and also allows us to support both external and internal r8a66597 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip r8a66597 without modifying the Kconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-05sh: add r8a66597 usb0 host to the se7724 boardMagnus Damm1-0/+38
Add USB host support for port CN27 on the Solution Engine 7724 board. The r8a66597-hcd driver is hooked up as a platform device and some registers are configured to enable the USB host function. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB host controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-01sh: fix se7724 ceu namesMagnus Damm1-2/+2
Use "ceu0" and "ceu1" as CEU names instead of "ceu". This fixes "memchunk" kernel command line selection on the solution engine 7724 board. With this patch applied use "memchunk.ceu0=1m" or "memchunk.ceu1=1m" on kernel command line to override physically memory size to one meg for CEU0 or CEU1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.