aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/boards (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-08-15sh: use in-soc KEYSC on se7724Magnus Damm1-4/+5
This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13sh: fix i2c init order on ap325rxa V2Magnus Damm1-1/+1
Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13sh: fix i2c init order on Migo-R V2Magnus Damm1-1/+1
Convert the Migo-R board code to register devices at arch_initcall() time instead of __initcall(). This fix unbreaks migor_ts touch screen driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-05sh: add r8a66597 usb0 host to the se7724 boardMagnus Damm1-0/+38
Add USB host support for port CN27 on the Solution Engine 7724 board. The r8a66597-hcd driver is hooked up as a platform device and some registers are configured to enable the USB host function. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB host controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-01sh: fix se7724 ceu namesMagnus Damm1-2/+2
Use "ceu0" and "ceu1" as CEU names instead of "ceu". This fixes "memchunk" kernel command line selection on the solution engine 7724 board. With this patch applied use "memchunk.ceu0=1m" or "memchunk.ceu1=1m" on kernel command line to override physically memory size to one meg for CEU0 or CEU1. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-29arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolonsJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-26sh: ms7724se: Add sh_eth supportKuninori Morimoto1-2/+104
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: pci: Initial PCI-Express support for SH7786 Urquell board.Paul Mundt1-0/+1
This adds initial support for the PCI-Express module in the SH7786, particularly as it relates to the urquell platform. Presently it is only supported in root complex mode, with endpoint mode still requiring more debugging. 29/32-bit mode and lane configurations are selectable via board mode pins, and are otherwise fixed. Only 4x and 1x PCI channels are presently handled, the PCI bridge still requires additional debugging and stabilization in hardware. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', 'sh/platform-updates' and 'sh/perf_counter'Paul Mundt6-58/+119
2009-06-17SH: convert migor to soc-camera as platform-deviceGuennadi Liakhovetski1-27/+52
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17SH: convert ap325rxa to soc-camera as platform-deviceGuennadi Liakhovetski1-18/+32
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17soc-camera: unify i2c camera device platform dataGuennadi Liakhovetski2-3/+3
Unify i2c camera device platform data to point to struct soc_camera_link for a smooth transition to soc-camera as a platform driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: x3proto: add platform data for r8a66597-hcdYoshihiro Shimoda1-3/+9
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: highlander: add platform data for r8a66597-hcdYoshihiro Shimoda1-3/+9
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: sh7785lcr: add platform data for r8a66597-hcdYoshihiro Shimoda1-4/+10
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: Revised clock function in highlanderNobuhiro Iwamatsu1-1/+2
Clock function was changed, but highlander used old function. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: Add support mtd mapping for highlanderNobuhiro Iwamatsu1-0/+49
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-16sh: smsc911x support for the rsk7203 boardMagnus Damm1-2/+6
This patch adds support for the LAN9118 ethernet on rsk7203. The LAN9118 controller is hooked up using a 16-bit data bus, but the rsk7203 board does not swap the byte lanes as needed between the sh7203 processor and the the ethernet controller. In the processor the CS memory window is configured in 16-bit mode but the smsc911x driver is told to do 32-bit accesses to improve performance. The SMSC911X_SWAP_FIFO flag is used to tell the driver to do software byte swapping of fifo data. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15sh: urquell: Add system FPGA mode pin support.Paul Mundt1-0/+7
Urquell has a system FPGA capable of reading the mode pin states from software, wire this up in the machvec. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14sh: pci: remove duplicated #include'sHuang Weiyi1-1/+0
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add AP325RXA mode pin configurationMagnus Damm1-0/+12
This patch adds mode pin configuration to ap325rxa. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add Migo-R mode pin configurationMagnus Damm1-0/+19
This patch adds mode pin configuration and a machvec structure to Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: rework mode pin codeMagnus Damm1-7/+7
This patch reworks the mode pin code to keep the pin definitions in one place. The mode pins values are now the value of the bit instead of bit number. With this patch in place the sh7785 header file contains mode pin comments. The sh7785 clock code and the sh7785lcr board code are updated to reflect the new shared mode pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785lcr mode pin configurationMagnus Damm1-0/+22
This patch adds mode pin support to the sh7785lcr board. The harware allows the user to control the mode pins using dip switches S1 and S2, but from the software the pins are fixed to the factory default since we have no way to reading out this configuration from software. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26Merge branch 'sh/clkfwk'Paul Mundt1-2/+20
2009-05-26sh: Add ms7724se (SH7724) board supportKuninori Morimoto5-0/+607
This adds preliminary support for the ms7724se solution engine board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22Merge branches 'sh/stable-updates' and 'sh/sparseirq'Paul Mundt15-250/+136
2009-05-22sh: ap325 camera without i2c driver fixMagnus Damm1-0/+3
This patch fixes the ap325rxa ncm03j camera code to handle the case where no i2c driver is present. Without this fix i2c_transfer() may be passed NULL as adapter which results in a crash. Triggered when i2c-sh_mobile.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Update SH7785 for refactored clock framework.Paul Mundt1-2/+20
This updates the SH7785 CPU code as well as the SH7785LCR board support code for making use of the newly refactored clock framework. Support for the legacy CPG clocks is dropped at this point, with the extal frequency fed in from the board code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: Move out cayman-specific panic handler code to its own file.Paul Mundt2-1/+50
This moves out the cayman-specific panic handler code to a better location, and leaves the generic implementation a simple stub that is still used under emulation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08sh: mach-sh03: Give the sh03 rtc its own spinlock.Paul Mundt1-5/+5
This converts the sh03 rtc code off of using the global rtc_lock and on to its own spinlock. There are no other possible users of the rtc_lock, so serializing with it is not necessary. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07sh: Kill off unused SH-5 irq_describe cruft.Paul Mundt1-15/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07sh: Integrate the SH-5 onchip_remap() more coherently.Paul Mundt2-2/+2
Presently this is special-cased for early initialization. While there are situations where these static early initializations are still necessary, with minor changes it is possible to use this for the regular ioremap implementation as well. This allows us to kill off the special-casing for the remap completely and to start tidying up all of the SH-5 special-casing in drivers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30sh: pass through ioremap() for non-mmu processors.Magnus Damm1-3/+3
All 32-bit SuperH processors currently go through __ioremap_mode() and check for IO_TRAPPED and directly mapped segments. With this patch we simplify the MMU less case with a pass through version of __ioremap_mode() which just returns the physical address. The effects of this is change are: - fix non-MMU ioremap() of high address hardware blocks (sh7203 CMT) - make sure IO_TRAPPED is not selected Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-27sh: mach-r2d: add physmap-flash support for R2D+ boards.Jean-Christophe PLAGNIOL-VILLARD1-0/+50
The RTS7751R2D_1 boards only support 1MB of socket-mounted MBM29F040 flash, which we just leave alone as it's not terribly interesting. This adds support for the s29gl256p on the r2d+ boards that makes a bit more sense to expose to the user. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/.Paul Mundt2-152/+0
The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Kill off dead references to is_pci_ioaddr and friends.Paul Mundt4-66/+0
Some old boards are still using this in their I/O routines, kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20sh: pci: Consolidate pcibios_align_resource() definitions.Paul Mundt1-3/+6
This introduces a saner pcibios_align_resource() that can be used regardless of whether pci-auto or pci-new are being used, and consolidates it in pci-lib.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Kill off platform-specific multi-window mappings.Paul Mundt1-0/+17
Commit 68b42d1b548be1840aff7122fdebeb804daf0fa3 ("sh: sh7785lcr: Map whole PCI address space.") changed around the semantics of how various chip-selects are made accessible to PCI. Now that there is a single large mapping covering from CS0-CS6, there is no longer any need to do multi-window mapping. Subsequently, all of the differing implementations can be consolidated in to pci-sh7780. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17sh: pci: Move se7780 INTC fixups out of pci-sh7780.c.Paul Mundt1-2/+8
These fixups belong in the board INTC setup code, not in the middle of pci-sh7780.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16sh: pci memory range checking codeMagnus Damm1-1/+1
This patch changes the code to use __is_pci_memory() instead of is_pci_memaddr(). __is_pci_memory() loops through all the pci channels on the system to match memory windows. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16sh: add init member to pci_channel dataMagnus Damm1-6/+0
This patch adds an init callback to struct pci_channel and makes sure it is initialized properly. Code is added to call this init function from pcibios_init(). Return values are adjusted and a warning is is printed if init fails. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-13sh: ap325: use edge control for ov772x cameraKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-10sh: urquell: Fix up address mapping in board comments.Kuninori Morimoto1-15/+18
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-07sh: urquell: Add board commentKuninori Morimoto1-0/+27
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02sh: migor: Fix up CEU use flags.Paul Mundt1-3/+1
Follows the same change as per ap325rxa, which was inadvertently omitted. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: ap325 and Migo-R use new sh_mobile_ceu_info flagsKuninori Morimoto1-3/+1
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: ap325rxa: Add ov772x support, again.Kuninori Morimoto1-3/+50
Now that the V4L bits have finally settled.. This patch adds support for a secondary ov772x camera on ap325rxa. This is supported in addition to the regular soc_camera_platform camera. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-31sh: urquell: enable LAN deviceKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-30V4L/DVB (10665): soc-camera: add data signal polarity flags to driversGuennadi Liakhovetski2-3/+5
All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.