aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/cpu/sh2a/setup-sh7206.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-08-13sh: convert processor device setup functions to arch_initcall()Magnus Damm1-1/+1
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: module_clk -> peripheral_clk rename.Paul Mundt1-5/+5
For consistenct naming, and to allow us to fix up some confusion in the SH-Mobile clock framework, amongst other places. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03sh: Consolidate MTU2/CMT/TMU timer platform data.Paul Mundt1-7/+6
All of the SH timers use a roughly identical structure for platform data, which presently is broken out for each block. Consolidate all of these definitions, as there is no reason for them to be broken out in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03sh: sh2a MTU2 platform dataMagnus Damm1-0/+104
This patch adds MTU2 platform data for the following cpus: - sh7201 (3/5 channels) - sh7203/sh7263 (2/4 channels) - sh7206 (3/5 channels) - MXG (3/5 channels) Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-30sh: sh2/sh2a 16-bit CMT platform dataMagnus Damm1-0/+84
This patch adds 16-bit cmt platform data for the following cpus: - sh7619 (2 channels) - sh7203/sh7263 (2 channels) - sh7206 (2 channels) Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh7206.Paul Mundt1-96/+58
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26serial: Move asm-sh/sci.h to linux/serial_sci.h.Paul Mundt1-1/+1
This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: intc - remove default interrupt priority tablesMagnus Damm1-1/+1
This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for sh7206Magnus Damm1-51/+158
This patch converts the cpu specific interrupt setup code for sh7206 from ipr to intc. New vectors are also added to match the information provided by the datasheet. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: fix irqs for the second serial port on sh7206Magnus Damm1-4/+4
This patch makes sure the serial port interrupt irqs matches the datasheet. Only irqs for SCIF1 are changed. While at some cosmetic spaces are added. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20sh: IPR/INTC2 IRQ setup consolidation.Magnus Damm1-1/+1
This patch unifies the cpu specific interrupt setup functions for interrupt controller blocks such as ipr, intc2 and intc. There is no point in having separate functions for each interrupt controller, so let's clean this up. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-15sh: rework ipr codeMagnus Damm1-10/+14
This patch reworks the ipr code by grouping the offset array together with the ipr_data structure in a new data structure called ipr_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. This strategy has much in common with the recently merged intc2 code. One logic change has been made - the original ipr code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: sh7619 / sh7206 IPR initialize updateYoshinori Sato1-46/+43
IPR initialize proceduere update. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: IPR IRQ updates for SH7619/SH7206.Yoshinori Sato1-4/+58
This updates the SH7619 and SH7206 code for the IPR IRQ changes. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for SH7206 and SH7619 CPU subtypes.Yoshinori Sato1-0/+58
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.