aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/cpu/sh3/setup-sh770x.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-12-15sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)Magnus Damm1-25/+55
This patch breaks out the sh3 scif serial port platform data from a shared platform device to one platform device per port. Also, add serial ports to the list of early platform devices. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-13sh: convert processor device setup functions to arch_initcall()Magnus Damm1-1/+1
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: module_clk -> peripheral_clk rename.Paul Mundt1-3/+3
For consistenct naming, and to allow us to fix up some confusion in the SH-Mobile clock framework, amongst other places. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: TMU platform data for sh7706/sh7707/sh7708/sh7709Magnus Damm1-0/+108
Add TMU platform data for sh7706/sh7707/sh7708/sh7709. Both clockevent and clocksource support is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06sh: multiple vectors per irq - sh770x.Paul Mundt1-47/+21
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: unify external irq pin code for sh3Magnus Damm1-28/+4
This patch unifies the sh3 external irq pin code. It buys us some savings with reduced code redundancy, but the main feature with this change is irq sense selection support for all sh3 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26serial: Move asm-sh/sci.h to linux/serial_sci.h.Paul Mundt1-1/+1
This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26sh: fix rtc_resources setup for sh770xRafael Ignacio Zurita1-3/+3
Fix the RTC resources setup for sh770x. Whit these proper start values RTC driver (drivers/rtc/rtc-sh.c) works. Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: intc - remove default interrupt priority tablesMagnus Damm1-9/+2
This patch removes interrupt priority tables from the intc code. Optimal priority assignment varies with embedded application anyway, so keeping the interrupt priority tables together with cpu-specific code doesn't make sense. The function intc_set_priority() should be used instead to set the desired interrupt priority level. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - mark data structures as __initdataMagnus Damm1-5/+5
With the intc core improved it is now possible to put the intc data structures in the initdata section. Version two of this patch puts the __initdata inside DECLARE_INTC_DESC() and removes the __initdata included in the board specific r2d code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add a clear register to struct intc_prio_regMagnus Damm1-8/+8
We need a secondary register member in struct intc_prio_reg to support dual priority registers used by ipi on x3. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - remove redundant irq code for shminMagnus Damm1-0/+4
This patch removes redundant interrupt code for the shmin board which is using a sh770x processor and 4 IRQ lines as individual interrupts (IRQ-mode). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - fix IRQ4 and IRQ5 typo on sh3Magnus Damm1-1/+1
The intc tables for sh3 currently contain a typo where the bit fields in IPRD are mixed up for IRQ4 and IRQ5. This patch makes sure the correct bit fields are used - all according to the datasheets. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add missing vectors for SH7707Magnus Damm1-0/+8
This patch adds a few missing vectors for sh7707. The only interrupt controller differences between sh7707 and sh7709 seem to be added vectors for one LCD controller and two PCMCIA slots. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: intc - add support for SH7706, SH7707, SH7708, SH7709Magnus Damm1-0/+212
This patch unifies the cpu specific interrupt setup code for sh7706, sh7707, sh7708 and sh7709 and moves the code into a new file called setup-sh770x.c. It makes sense to share the setup code between these processors because most hardware blocks are identical from a software point of view. With this patch the sh770x processors now have a complete set of vectors that match with the information provided by the data sheets. This is a big improvement for sh7708. Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if pins IRQ0-3 should be used in IRQ mode. This patch also unifies the platform device setup code which means that the rtc driver now has platform data for all sh770x processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.