aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-03-28sh: Kill bogus GCC4 symbol exports.Paul Mundt1-3/+0
__sdivsi3_i4i, __udiv_qrnnd_16, and __udivsi3_i4i don't exist outside of the ST compiler, so kill them off. This causes compile failures with other GCC4 compilers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14sh: Fix bogus regs pointer in do_IRQ().Paul Mundt3-14/+7
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even setting it in the first place. This ended up with some rather broken behaviour in the sysrq show_regs(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12sh: Fix SH-3 cache entry_mask and way_size calculation.Paul Mundt2-16/+17
The code for performing the calculation was only in the SH-4 probe path, move it out to the common path so the other parts get this right too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Revert lazy dcache writeback changes.Paul Mundt1-3/+0
These ended up causing too many problems on older parts, revert for now.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Use L1_CACHE_BYTES for .data.cacheline_aligned.Paul Mundt1-1/+2
Previously this was using a hardcoded 32, use L1_CACHE_BYTES for cacheline alignment instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Fix kernel thread stack corruption with preempt.Hideo Saito1-3/+2
When I run a preemptive kernel-2.6.20 for SH7780, a created kthread(pdflush) can not exit by do_exit() in kernel_thread_helper. I think that the created kthread should have a room for 'struct pt_regs' space on the stack top, because __switch_to() will refer to the space as follows using 'regs = task_pt_regs(prev)' and next condition may be true. Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Fix sigmask trampling in signal delivery.Ryusuke Sakato1-1/+3
There was a missing return in do_signal() that caused the saved sigmask to be written back after having successfully delivered the signal. Signed-off-by: Ryusuke Sakato <sakato@hsdv.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05sh: Clear UBC when not in use.Stuart Menefy2-13/+34
This takes care of tearing down the UBC so it's not inadvertently left configured at the next context switch time. Failure to do this results in spurious SIGTRAPs in certain debug sequences. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-17Storage class should be before const qualifierTobias Klauser2-4/+4
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-15sh: rts7751r2d board updates.Paul Mundt2-5/+9
This tidies up some of the rts7751r2d mess and gets it booting again. Update the defconfig, too. Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14sh: Revert TLB miss fast-path changes that broke PTEA parts.Paul Mundt1-181/+20
This ended up causing problems for older parts (particularly ones using PTEA). Revert this for now, it can be added back in once it's had some more testing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Fix syscall numbering breakage.Paul Mundt1-4/+4
We accidentally broke the inotify syscalls, fix those up again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Local TLB flushing variants for SMP prep.Paul Mundt1-1/+0
Rename the existing flush routines to local_ variants for use by the IPI-backed global flush routines on SMP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Fixup cpu_data references for the non-boot CPUs.Paul Mundt9-178/+189
There are a lot of bogus cpu_data-> references that only end up working for the boot CPU, convert these to current_cpu_data to fixup SMP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Use a per-cpu ASID cache.Paul Mundt2-40/+37
Previously this was implemented using a global cache, cache this per-CPU instead and bump up the number of context IDs to match NR_CPUS. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: SH-DMAC compile fixesManuel Lauss1-1/+1
This patch does the following: - remove the make_ipr_irq stuff from dma-sh.c and replace it with a simple channel<->irq mapping table. - add DMTEx_IRQ constants for sh4 cpus - fix sh7751 DMAE irq number The SH7780 uses the same IRQs for DMA as other SH4 types, so I put the constants on top of the dma.h file. Other CPU types need to #define their own DMTEx_IRQ contants in their appropriate header. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: add SH7760 IPR IRQ dataManuel Lauss1-15/+51
Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Fix handle_BUG() compile error.Nobuhiro Iwamatsu1-1/+1
handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for CONFIG_BUG, make sure it's not built when CONFIG_BUG=n. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Lazy dcache writeback optimizations.Paul Mundt1-4/+0
This converts the lazy dcache handling to the model described in Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a bonus, this slightly cuts down on the cache flushing frequency. With that and the PTEA handling out of the way, the update_mmu_cache() implementations can be consolidated, and we no longer have to worry about which configuration the cache is in for the SH7705 case. And finally, explicitly disable the lazy writeback on SMP (SH-4A). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: More tidying for large base pages.Paul Mundt1-7/+3
There were a few more things that needed fixing up, namely THREAD_SIZE and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE assumptions were being made. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: shmin updates.Takashi YOSHII2-3/+37
This fixes up shmin (and SH7706/SH7708) IPR support for some of the recent API changes. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: allow earlyprintk baud rate to be set via command lineJamie Lenehan1-2/+22
This allows the baud rate for earlyprintk for sh4 without the standard BIOS to be set via the command line. This uses the same format as i386 and x86_64, which is: earlyprintk=serial,ttySC1,38400 The second parameter (ttySC1 above) is usually the console device name or the io address of the serial port. I allow that to be specified but ignore it in order to keep the format the same as i386/x86_64. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: sh7619 / sh7206 IPR initialize updateYoshinori Sato2-79/+72
IPR initialize proceduere update. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Update SH-2 to use the debug trap jump table.Yoshinori Sato1-6/+4
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13sh: Use a jump call table for debug trap handlers.Paul Mundt7-85/+113
This rips out most of the needlessly complicated sh_bios and kgdb trap handling, and forces it all through a common fast dispatch path. As more debug traps are inserted, it's important to keep them in sync for all of the parts, not just SH-3/4. As the SH-2 parts are unable to do traps in the >= 0x40 range, we restrict the debug traps to the 0x30-0x3f range on all parts, and also bump the kgdb breakpoint trap down in to this range (from 0xff to 0x3c) so it's possible to use for nommu. Optionally, this table can be padded out to catch spurious traps for SH-3/4, but we don't do that yet.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-12[PATCH] Dynamic kernel command-line: shAlon Bar-Lev1-3/+3
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Consolidate default sched_clock()Alexey Dobriyan1-8/+0
Use attribute(weak). Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] disable init/initramfs.c: architecturesJean-Paul Saman1-0/+4
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-apmLinus Torvalds2-539/+0
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-apm: [APM] SH: Convert to use shared APM emulation. [APM] MIPS: Convert to use shared APM emulation. [APM] ARM: Convert to use shared APM emulation. [APM] Add shared version of APM emulation
2007-02-09[PATCH] SH vdso: use install_special_mapping()Paul Mundt1-49/+9
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[APM] SH: Convert to use shared APM emulation.Paul Mundt2-539/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-12-12sh: Fixup SH-2 BUG() trap handling.Yoshinori Sato1-18/+14
This adds in support for the BUG() trap on SH-2. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Use early_param() for earlyprintk parsing.Paul Mundt2-31/+16
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.Paul Mundt1-1/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fixup .data.page_aligned.Paul Mundt1-1/+1
This had a bogus .data.idt reference, fix it up.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Hook up SH7722 scif ipr interrupts.Paul Mundt1-0/+4
Add the SCIF IRQs to the IPR table for SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fixup sh_bios() trap handling.Paul Mundt1-2/+13
This was inadvertently broken when the entry.S code split up, restore the missing branch and get subsequent traps working under debug again. This manifested itself as a lockup when attempting to reload the VBR base. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: SH-MobileR SH7722 CPU support.Paul Mundt14-12/+215
This adds CPU support for the SH7722. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Convert remaining remap_area_pages() users to ioremap_page_range().Paul Mundt1-3/+4
A couple of these were missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fixup kernel_execve() for syscall cleanups.Paul Mundt1-0/+6
SH-2 and SH-2A need to use a different syscall base for the trapa vector than the other parts, so fixup the logic in the kernel_execve() case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Fix get_wchan().Paul Mundt1-2/+3
Some time ago the schedule frame size changed and we failed to reflect this in get_wchan() at the time. This first popped up as a problem on SH7751R where schedule_frame ended up being unaligned and generating an unaligned trap. This fixes it up again.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: BUG() handling through trapa vector.Paul Mundt2-0/+45
Previously we haven't been doing anything with verbose BUG() reporting, and we've been relying on the oops path for handling BUG()'s, which is rather sub-optimal. This switches BUG handling to use a fixed trapa vector (#0x3e) where we construct a small bug frame post trapa instruction to get the context right. This also makes it trivial to wire up a DIE_BUG for the atomic die chain, which we couldn't really do before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: Trivial build fixes for SH-2 support.Yoshinori Sato2-2/+2
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: IPR IRQ updates for SH7619/SH7206.Yoshinori Sato2-4/+99
This updates the SH7619 and SH7206 code for the IPR IRQ changes. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: gcc4 symbol export fixups.Stuart Menefy1-1/+14
gcc 4 for sh changes the names of some compiler intrinsic functions and adds some additional ones. This patch adds the new ones, and fixes up various module symbol resolution issues. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12sh: register rtc resources for sh775x.Jamie Lenehan1-0/+31
Register the RTC resources for the sh775x subtype so that the new generic RTC support in drivers/rtc/rtc-sh.c will work. Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-07[PATCH] initrd: remove unused false condition for initrd_startHenry Nestler1-2/+1
After LOADER_TYPE && INITRD_START are true, the short if-condition for INITRD_START can never be false. Remove unused code from the else condition. Signed-off-by: Henry Nestler <henry.ne@arcor.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Export pm_suspend for the shared APM emulationRalf Baechle1-4/+0
The new shared APM emulation just like its ARM and MIPS predecessors uses pm_suspend() which was only exported on SH. Move export to close to it's definition where it really should be anyway. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham1-0/+1
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter1-1/+1
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.