aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sh/mm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-01-28sh: Provide a stubbed __set_fixmap() for nommu.Paul Mundt1-0/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Stub in page_table_range_init() on nommu.Paul Mundt1-0/+6
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Populate swapper_pg_dir with fixmap range.Stuart Menefy1-0/+36
This saves us from having to use kmalloc() for the fixmap entries, which is needed early for the uncached fixmap. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Preparation for uncached jumps through PMB.Stuart Menefy6-30/+46
Presently most of the 29-bit physical parts do P1/P2 segmentation with a 1:1 cached/uncached mapping, jumping between the two to control the caching behaviour. This provides the basic infrastructure to maintain this behaviour on 32-bit physical parts that don't map P1/P2 at all, using a shiny new linker section and corresponding fixmap entry. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix compile error of arch/sh/mm/pmb.cNobuhiro Iwamatsu1-1/+1
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: comment tidying for sh64->sh migration.Paul Mundt3-25/+22
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Invalidate the TLB after applying PMB mappings.Stuart Menefy1-0/+6
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: clear/copy_page renames in lib and lib64.Paul Mundt3-542/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Rename the _32 and _64 TLB flush variants.Paul Mundt4-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Copy over special CFLAGS for SH-5 TLB miss.Paul Mundt1-0/+25
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move over SH-5 TLB and cache support code.Paul Mundt3-2/+1203
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off a stray proc tlb reference in fault_64.Paul Mundt1-4/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Bump the MEMORY_SIZE default to something reasonable.Paul Mundt1-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.Paul Mundt1-1/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move in the SH-5 TLB miss.Paul Mundt4-2/+281
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Tidy up various clear_page()/copy_page() definitions.Paul Mundt3-20/+5
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: ioremap_64 needs after_bootmem.Paul Mundt1-0/+3
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Split out tlb-flush in to _32 and _64 variants.Paul Mundt4-2/+477
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Split out pgtable.h in to _32 and _64 variants.Paul Mundt1-12/+28
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: ioremap_64 needs proc_fs.h.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Split out ioremap in to _32 and _64 variants.Paul Mundt4-1/+393
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Fix up 64kB page size selection on SH-5.Paul Mundt1-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Split out extable.c _32 and _64 variants.Paul Mundt5-36/+132
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Add SH-5 support to the consistent DMA impl.Paul Mundt1-18/+28
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Split out 29-bit and 32-bit physical mode definitions.Paul Mundt2-1/+12
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Switch Kconfig.sh64 to use arch/sh/mm/Kconfig.Paul Mundt1-3/+7
Consolidates the HUGETLB definitions and others. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move CPU subtypes to Kconfig.sh.Paul Mundt1-190/+0
We intend to share the mm options, so move the SH-only subtypes up a level. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19sh: lockless UTLB miss fast-path.Paul Mundt1-18/+7
With the refactored update_mmu_cache() introduced in older kernels, there's no longer any need to take the page_table_lock in this path, so simply drop it completely. Without this, performance degradation is seen on SMP on heavily threaded workloads that don't use the split ptlock, and ultimately we have no reason to contend for the lock in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-19sh: Kill off UTLB flush in fast-path.Paul Mundt1-8/+0
The __do_page_fault() fast-path contains a UTLB flush in order to force an ITLB reload, this isn't needed in practice as the ITLB is auto-reloaded from the UTLB anyways, which is already displaced by the manual 'ldtlb' in the update_mmu_cache() path. This provides a measurable speed up in the TLB miss fast-path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off __{copy,clear}_user_page().Paul Mundt2-106/+0
Now that copy_to_user_page()/copy_from_user_page() are wired up, we can drop the old __copy_xxx() implementations. Now that the page colouring scheme has changed via kmap_coherent(), we can avoid the flush in these specific helpers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Optimized copy_{to,from}_user_page() for SH-4.Paul Mundt1-23/+29
This moves copy_{to,from}_user_page() out-of-line on SH-4 and converts for the kmap_coherent() API. Based on the MIPS implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Wire up clear_user_highpage().Paul Mundt1-0/+23
With the kmap_coherent() API in place, this is trivial to implement, and lets us avoid the cache flush in certain cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt1-20/+1
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Add -Werror for clean directories.Paul Mundt1-0/+2
Follow the MIPS and sparc64 changes for -Werror instrumentation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02sh: Fix optimized __copy_user() movca.l usage.Stuart Menefy1-0/+4
movca.l is restricted to SH-4 and up only, though compilers that are unable to support ISA tuning (especially older versions of binutils) will happily compile in the bogus opcode on older parts. Conditionalize it to fix SH-3 regressions noted by Kristoffer. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-19pid namespaces: define is_global_init() and is_container_init()Serge E. Hallyn1-1/+1
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: Pavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle1-4/+4
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter1-2/+1
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fix memory hot remove not configured case.KAMEZAWA Hiroyuki1-6/+0
Now, arch dependent code around CONFIG_MEMORY_HOTREMOVE is a mess. This patch cleans up them. This is against 2.6.23-rc6-mm1. - fix compile failure on ia64/ CONFIG_MEMORY_HOTPLUG && !CONFIG_MEMORY_HOTREMOVE case. - For !CONFIG_MEMORY_HOTREMOVE, add generic no-op remove_memory(), which returns -EINVAL. - removed remove_pages() only used in powerpc. - removed no-op remove_memory() in i386, sh, sparc64, x86_64. - only powerpc returns -ENOSYS at memory hot remove(no-op). changes it to return -EINVAL. Note: Currently, only ia64 supports CONFIG_MEMORY_HOTREMOVE. I welcome other archs if there are requirements and testers. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16During VM oom condition, kill all threads in process groupWill Schmidt1-1/+1
We have had complaints where a threaded application is left in a bad state after one of it's threads is killed when we hit a VM: out_of_memory condition. Killing just one of the process threads can leave the application in a bad state, whereas killing the entire process group would allow for the application to restart, or be otherwise handled, and makes it very obvious that something has gone wrong. This change allows the entire process group to be taken down, rather than just the one thread. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28sh: __copy_user() optimizations for small copies.Stuart Menefy1-61/+108
This implements a fast-path for small (less than 12 bytes) copies, with the existing path treated as the slow-path and left as the default behaviour for all other copy sizes. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Support extended mode TLB on SH-X3.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Bump MAX_ACTIVE_REGIONS for SH7785.Paul Mundt1-1/+2
When using URAM in NUMA mode another active region is needed. Bump this up so we don't trigger the region truncation in add_active_range(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27sh: Disable 4kB pages on extended mode TLB.Paul Mundt1-3/+5
4kB pages are unstable on extended mode TLB, it's recommended that TLB compat mode be used when using a 4kB PAGE_SIZE. Set the default for extended mode to 8kB. This should have negligible impact, as other than the extra swap cache entry bits, there's no reason to use the extended mode TLB with 4kB pages. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Revert incorrect license string changes.Paul Mundt1-1/+1
These were right the first time. Either a thinko or building in the wrong tree. Revert this. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Calculate cache aliases on L2 caches.Paul Mundt1-0/+15
Calculate the number of cache aliases on probed L2 caches, and while we're at it, print out the detected statistics at boot time for these also. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: nommu: Kill off dummy page fault ops for SH-3/4.Paul Mundt2-67/+0
We stopped referencing these functions unconditionally when the old entry.S code was refactored, so this is just dead code at present. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-24sh: Fix alias calculation for non-aliasing cases.Paul Mundt1-2/+2
There was an off-by-1 on the cache alias detection logic on SH-4, which caused n_aliases to always be 1 even when the page size precluded the existence of aliases. With this corrected, 64KB pages happily reports n_aliases == 0, and hits the appropriate fast paths in the flushing routines. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Initial SH-X3 SMP support.Paul Mundt1-0/+1
This adds basic support for SH-X3 SMP (4 CPUs). More IPI and cache debugging is necessary, mostly interfacing the d-cache coherency and the I-cache broadcast invalidates. Only for testing at present! Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Avoid smp_processor_id() in cache desc paths.Paul Mundt1-31/+31
current_cpu_data uses smp_processor_id() in order to find the corresponding cpu_data. As the cache descs are all currently identical, just have this look at probed results from the boot CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.