aboutsummaryrefslogtreecommitdiffstats
path: root/arch/sparc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-18sparc64: Enable 64-bit DMATushar Dave2-2/+10
ATU 64bit addressing allows PCIe devices with 64bit DMA capabilities to use ATU for 64bit DMA. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: chris hyser <chris.hyser@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sparc64: Enable sun4v dma ops to use IOMMU v2 APIsTushar Dave4-58/+211
Add Hypervisor IOMMU v2 APIs pci_iotsb_map(), pci_iotsb_demap() and enable sun4v dma ops to use IOMMU v2 API for all PCIe devices with 64bit DMA mask. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: chris hyser <chris.hyser@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sparc64: Bind PCIe devices to use IOMMU v2 serviceTushar Dave3-0/+60
In order to use Hypervisor (HV) IOMMU v2 API for map/demap, each PCIe device has to be bound to IOTSB using HV API pci_iotsb_bind(). Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: chris hyser <chris.hyser@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sparc64: Initialize iommu_map_table and iommu_poolTushar Dave2-0/+21
Like legacy IOMMU, use common iommu_map_table and iommu_pool for ATU. This change initializes iommu_map_table and iommu_pool for ATU. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: chris hyser <chris.hyser@oracle.com> Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sparc64: Add ATU (new IOMMU) supportTushar Dave6-0/+529
ATU (Address Translation Unit) is a new IOMMU in SPARC supported with Hypervisor IOMMU v2 APIs. Current SPARC IOMMU supports only 32bit address ranges and one TSB per PCIe root complex that has a 2GB per root complex DVMA space limit. The limit has become a scalability bottleneck nowadays that a typical 10G/40G NIC can consume 300MB-500MB DVMA space per instance. When DVMA resource is exhausted, devices will not be usable since the driver can't allocate DVMA. ATU removes bottleneck by allowing guest os to create IOTSB of size 32G (or more) with 64bit address ranges available in ATU HW. 32G is more than enough DVMA space to be shared by all PCIe devices under root complex contrast to 2G space provided by legacy IOMMU. ATU allows PCIe devices to use 64bit DMA addressing. Devices which choose to use 32bit DMA mask will continue to work with the existing legacy IOMMU. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Reviewed-by: chris hyser <chris.hyser@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18sparc64: Add FORCE_MAX_ZONEORDER and default to 13Dave Kleikamp1-0/+18
This change allows ATU (new IOMMU) in SPARC systems to request large (32M) contiguous memory during boot for creating IOTSB backing store. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14sparc64: fix compile warning section mismatch in find_node()Thomas Tai1-3/+3
A compile warning is introduced by a commit to fix the find_node(). This patch fix the compile warning by moving find_node() into __init section. Because find_node() is only used by memblock_nid_range() which is only used by a __init add_node_ranges(). find_node() and memblock_nid_range() should also be inside __init section. Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10sparc32: Fix inverted invalid_frame_pointer checks on sigreturnsAndreas Larsson1-2/+2
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-10sparc64: Fix find_node warning if numa node cannot be foundThomas Tai1-4/+61
When booting up LDOM, find_node() warns that a physical address doesn't match a NUMA node. WARNING: CPU: 0 PID: 0 at arch/sparc/mm/init_64.c:835 find_node+0xf4/0x120 find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0.Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc3 #4 Call Trace: [0000000000468ba0] __warn+0xc0/0xe0 [0000000000468c74] warn_slowpath_fmt+0x34/0x60 [00000000004592f4] find_node+0xf4/0x120 [0000000000dd0774] add_node_ranges+0x38/0xe4 [0000000000dd0b1c] numa_parse_mdesc+0x268/0x2e4 [0000000000dd0e9c] bootmem_init+0xb8/0x160 [0000000000dd174c] paging_init+0x808/0x8fc [0000000000dcb0d0] setup_arch+0x2c8/0x2f0 [0000000000dc68a0] start_kernel+0x48/0x424 [0000000000dcb374] start_early_boot+0x27c/0x28c [0000000000a32c08] tlb_fixup_done+0x4c/0x64 [0000000000027f08] 0x27f08 It is because linux use an internal structure node_masks[] to keep the best memory latency node only. However, LDOM mdesc can contain single latency-group with multiple memory latency nodes. If the address doesn't match the best latency node within node_masks[], it should check for an alternative via mdesc. The warning message should only be printed if the address doesn't match any node_masks[] nor within mdesc. To minimize the impact of searching mdesc every time, the last matched mask and index is stored in a variable. Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27sparc64: Handle extremely large kernel TLB range flushes more gracefully.David S. Miller1-55/+228
When the vmalloc area gets fragmented, and because the firmware mapping area sits between where modules live and the vmalloc area, we can sometimes receive requests for enormous kernel TLB range flushes. When this happens the cpu just spins flushing billions of pages and this triggers the NMI watchdog and other problems. We took care of this on the TSB side by doing a linear scan of the table once we pass a certain threshold. Do something similar for the TLB flush, however we are limited by the TLB flush facilities provided by the different chip variants. First of all we use an (mostly arbitrary) cut-off of 256K which is about 32 pages. This can be tuned in the future. The huge range code path for each chip works as follows: 1) On spitfire we flush all non-locked TLB entries using diagnostic acceses. 2) On cheetah we use the "flush all" TLB flush. 3) On sun4v/hypervisor we do a TLB context flush on context 0, which unlike previous chips does not remove "permanent" or locked entries. We could probably do something better on spitfire, such as limiting the flush to kernel TLB entries or even doing range comparisons. However that probably isn't worth it since those chips are old and the TLB only had 64 entries. Reported-by: James Clarke <jrtc27@jrtc27.com> Tested-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call code.David S. Miller1-12/+30
Just like the non-cross-call TLB flush handlers, the cross-call ones need to avoid doing PC-relative branches outside of their code blocks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending.David S. Miller1-1/+1
Noticed by James Clarke. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-25sparc64: Handle extremely large kernel TSB range flushes sanely.David S. Miller1-0/+17
If the number of pages we are flushing is more than twice the number of entries in the TSB, just scan the TSB table for matches rather than probing each and every page in the range. Based upon a patch and report by James Clarke. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-25sparc: Handle negative offsets in arch_jump_label_transformJames Clarke1-6/+17
Additionally, if the offset will overflow the immediate for a ba,pt instruction, fall back on a standard ba to get an extra 3 bits. Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-25sparc64: Fix illegal relative branches in hypervisor patched TLB code.David S. Miller1-14/+51
When we copy code over to patch another piece of code, we can only use PC-relative branches that target code within that piece of code. Such PC-relative branches cannot be made to external symbols because the patch moves the location of the code and thus modifies the relative address of external symbols. Use an absolute jmpl to fix this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Delete now unused user copy fixup functions.David S. Miller3-105/+4
Now that all of the user copy routines are converted to return accurate residual lengths when an exception occurs, we no longer need the broken fixup routines. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Delete now unused user copy assembler helpers.David S. Miller1-30/+0
All of __ret{,l}_mone{_asi,_fp,_asi_fpu} are now unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.David S. Miller3-81/+162
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert NG2copy_{from,to}_user to accurate exception reporting.David S. Miller3-91/+153
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting.David S. Miller3-79/+162
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting.David S. Miller3-79/+231
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert U1copy_{from,to}_user to accurate exception reporting.David S. Miller3-124/+237
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert GENcopy_{from,to}_user to accurate exception reporting.David S. Miller3-18/+38
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Convert copy_in_user to accurate exception reporting.David S. Miller1-10/+25
Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Prepare to move to more saner user copy exception handling.David S. Miller15-39/+47
The fixup helper function mechanism for handling user copy fault handling is not %100 accurrate, and can never be made so. We are going to transition the code to return the running return return length, which is always kept track in one or more registers of each of these routines. In order to convert them one by one, we have to allow the existing behavior to continue functioning. Therefore make all the copy code that wants the fixup helper to be used return negative one. After all of the user copy routines have been converted, this logic and the fixup helpers themselves can be removed completely. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Delete __ret_efault.David S. Miller2-8/+1
It is completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc32: Fix old style declaration GCC warningsTobias Klauser1-1/+1
Fix [-Wold-style-declaration] GCC warnings by moving the inline keyword before the return type. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Fix old style declaration GCC warningsTobias Klauser1-6/+6
Fix [-Wold-style-declaration] GCC warnings by moving the inline keyword before the return type. Signed-off-by: Tobias Klnuser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-24sparc64: Setup a scheduling domain for highest level cache.Atish Patra4-21/+46
Individual scheduler domain should consist different hierarchy consisting of cores sharing similar property. Currently, no scheduler domain is defined separately for the cores that shares the last level cache. As a result, the scheduler fails to take advantage of cache locality while migrating tasks during load balancing. Here are the cpu masks currently present for sparc that are/can be used in scheduler domain construction. cpu_core_map : set based on the cores that shares l1 cache. core_core_sib_map : is set based on the socket id. The prior SPARC notion of socket was defined as highest level of shared cache. However, the MD record on T7 platforms now describes the CPUs that share the physical socket and this is no longer tied to shared cache. That's why a separate cpu mask needs to be created that truly represent highest level of shared cache for all platforms. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19Merge branch 'gup_flag-cleanups'Linus Torvalds2-9/+18
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e088546522 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
2016-10-19mm: replace access_process_vm() write parameter with gup_flagsLorenzo Stoakes1-8/+16
This removes the 'write' argument from access_process_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-18mm: replace get_user_pages_unlocked() write/force parameters with gup_flagsLorenzo Stoakes1-1/+2
This removes the 'write' and 'force' use from get_user_pages_unlocked() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-14Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds48-448/+174
Pull kbuild updates from Michal Marek: - EXPORT_SYMBOL for asm source by Al Viro. This does bring a regression, because genksyms no longer generates checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is working on a patch to fix this. Plus, we are talking about functions like strcpy(), which rarely change prototypes. - Fixes for PPC fallout of the above by Stephen Rothwell and Nick Piggin - fixdep speedup by Alexey Dobriyan. - preparatory work by Nick Piggin to allow architectures to build with -ffunction-sections, -fdata-sections and --gc-sections - CONFIG_THIN_ARCHIVES support by Stephen Rothwell - fix for filenames with colons in the initramfs source by me. * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits) initramfs: Escape colons in depfile ppc: there is no clear_pages to export powerpc/64: whitelist unresolved modversions CRCs kbuild: -ffunction-sections fix for archs with conflicting sections kbuild: add arch specific post-link Makefile kbuild: allow archs to select link dead code/data elimination kbuild: allow architectures to use thin archives instead of ld -r kbuild: Regenerate genksyms lexer kbuild: genksyms fix for typeof handling fixdep: faster CONFIG_ search ia64: move exports to definitions sparc32: debride memcpy.S a bit [sparc] unify 32bit and 64bit string.h sparc: move exports to definitions ppc: move exports to definitions arm: move exports to definitions s390: move exports to definitions m68k: move exports to definitions alpha: move exports to actual definitions x86: move exports to actual definitions ...
2016-10-11Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-18/+22
Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal
2016-10-07nmi_backtrace: generate one-line reports for idle cpusChris Metcalf1-0/+1
When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Tested-by: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07nmi_backtrace: add more trigger_*_cpu_backtrace() methodsChris Metcalf2-7/+8
Patch series "improvements to the nmi_backtrace code" v9. This patch series modifies the trigger_xxx_backtrace() NMI-based remote backtracing code to make it more flexible, and makes a few small improvements along the way. The motivation comes from the task isolation code, where there are scenarios where we want to be able to diagnose a case where some cpu is about to interrupt a task-isolated cpu. It can be helpful to see both where the interrupting cpu is, and also an approximation of where the cpu that is being interrupted is. The nmi_backtrace framework allows us to discover the stack of the interrupted cpu. I've tested that the change works as desired on tile, and build-tested x86, arm, mips, and sparc64. For x86 I confirmed that the generic cpuidle stuff as well as the architecture-specific routines are in the new cpuidle section. For arm, mips, and sparc I just build-tested it and made sure the generic cpuidle routines were in the new cpuidle section, but I didn't attempt to figure out which the platform-specific idle routines might be. That might be more usefully done by someone with platform experience in follow-up patches. This patch (of 4): Currently you can only request a backtrace of either all cpus, or all cpus but yourself. It can also be helpful to request a remote backtrace of a single cpu, and since we want that, the logical extension is to support a cpumask as the underlying primitive. This change modifies the existing lib/nmi_backtrace.c code to take a cpumask as its basic primitive, and modifies the linux/nmi.h code to use the new "cpumask" method instead. The existing clients of nmi_backtrace (arm and x86) are converted to using the new cpumask approach in this change. The other users of the backtracing API (sparc64 and mips) are converted to use the cpumask approach rather than the all/allbutself approach. The mips code ignored the "include_self" boolean but with this change it will now also dump a local backtrace if requested. Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVEVineet Gupta1-1/+0
This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds8-44/+71
Pull sparc updates from David Miller: "Besides some cleanups the major thing here is supporting relaxed ordering PCIe transactions on newer sparc64 machines, from Chris Hyser" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fixing ident and beautifying code sparc64: Enable setting "relaxed ordering" in IOMMU mappings sparc64: Enable PCI IOMMU version 2 API sparc: migrate exception table users off module.h and onto extable.h
2016-10-06sparc: fixing ident and beautifying codenetmonk@netmonk.org1-28/+24
Good evening, Following LinuxCodingStyle documentation and with the help of Sam, fixed severals identation issues in the code, and few others cosmetic changes And last and i hope least fixing my name :) Signed-off-by : Dominique Carrel <netmonk@netmonk.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc64: Enable setting "relaxed ordering" in IOMMU mappingschris hyser2-1/+16
Enable relaxed ordering for memory writes in IOMMU TSB entry from dma_4v_alloc_coherent(), dma_4v_map_page() and dma_4v_map_sg() when dma_attrs DMA_ATTR_WEAK_ORDERING is set. This requires PCI IOMMU I/O Translation Services version 2.0 API. Many PCIe devices allow enabling relaxed-ordering (memory writes bypassing other memory writes) for various DMA buffers. A notable exception is the Mellanox mlx4 IB adapter. Due to the nature of x86 HW this appears to have little performance impact there. On SPARC HW however, this results in major performance degradation getting only about 3Gbps. Enabling RO in the IOMMU entries corresponding to mlx4 data buffers increases the throughput to about 13 Gbps. Orabug: 19245907 Signed-off-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc64: Enable PCI IOMMU version 2 APIchris hyser1-10/+26
Enable Version 2 of the PCI IOMMU API needed for advanced features such as PCI Relaxed Ordering and greater than 2 GB DMA address space per root complex. Signed-off-by: Chris Hyser <chris.hyser@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-06sparc: migrate exception table users off module.h and onto extable.hPaul Gortmaker5-5/+5
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-05sparc64: separate extable_64.h, switch elf_64.h to itAl Viro3-18/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-03Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+0
Pull CPU hotplug updates from Thomas Gleixner: "Yet another batch of cpu hotplug core updates and conversions: - Provide core infrastructure for multi instance drivers so the drivers do not have to keep custom lists. - Convert custom lists to the new infrastructure. The block-mq custom list conversion comes through the block tree and makes the diffstat tip over to more lines removed than added. - Handle unbalanced hotplug enable/disable calls more gracefully. - Remove the obsolete CPU_STARTING/DYING notifier support. - Convert another batch of notifier users. The relayfs changes which conflicted with the conversion have been shipped to me by Andrew. The remaining lot is targeted for 4.10 so that we finally can remove the rest of the notifiers" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) cpufreq: Fix up conversion to hotplug state machine blk/mq: Reserve hotplug states for block multiqueue x86/apic/uv: Convert to hotplug state machine s390/mm/pfault: Convert to hotplug state machine mips/loongson/smp: Convert to hotplug state machine mips/octeon/smp: Convert to hotplug state machine fault-injection/cpu: Convert to hotplug state machine padata: Convert to hotplug state machine cpufreq: Convert to hotplug state machine ACPI/processor: Convert to hotplug state machine virtio scsi: Convert to hotplug state machine oprofile/timer: Convert to hotplug state machine block/softirq: Convert to hotplug state machine lib/irq_poll: Convert to hotplug state machine x86/microcode: Convert to hotplug state machine sh/SH-X3 SMP: Convert to hotplug state machine ia64/mca: Convert to hotplug state machine ARM/OMAP/wakeupgen: Convert to hotplug state machine ARM/shmobile: Convert to hotplug state machine arm64/FP/SIMD: Convert to hotplug state machine ...
2016-10-03Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-2/+5
Pull low-level x86 updates from Ingo Molnar: "In this cycle this topic tree has become one of those 'super topics' that accumulated a lot of changes: - Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on x86 - preceded by an array of changes. v4.8 saw preparatory changes in this area already - this is the rest of the work. Includes the thread stack caching performance optimization. (Andy Lutomirski) - switch_to() cleanups and all around enhancements. (Brian Gerst) - A large number of dumpstack infrastructure enhancements and an unwinder abstraction. The secret long term plan is safe(r) live patching plus maybe another attempt at debuginfo based unwinding - but all these current bits are standalone enhancements in a frame pointer based debug environment as well. (Josh Poimboeuf) - More __ro_after_init and const annotations. (Kees Cook) - Enable KASLR for the vmemmap memory region. (Thomas Garnier)" [ The virtually mapped stack changes are pretty fundamental, and not x86-specific per se, even if they are only used on x86 right now. ] * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) x86/asm: Get rid of __read_cr4_safe() thread_info: Use unsigned long for flags x86/alternatives: Add stack frame dependency to alternative_call_2() x86/dumpstack: Fix show_stack() task pointer regression x86/dumpstack: Remove dump_trace() and related callbacks x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder oprofile/x86: Convert x86_backtrace() to use the new unwinder x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder perf/x86: Convert perf_callchain_kernel() to use the new unwinder x86/unwind: Add new unwind interface and implementations x86/dumpstack: Remove NULL task pointer convention fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK lib/syscall: Pin the task stack in collect_syscall() x86/process: Pin the target stack in get_wchan() x86/dumpstack: Pin the target stack when dumping it kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function sched/core: Add try_get_task_stack() and put_task_stack() x86/entry/64: Fix a minor comment rebase error iommu/amd: Don't put completion-wait semaphore on stack ...
2016-09-28sparc64: Fix non-SMP build.David S. Miller1-0/+1
Need to provide a dummy smp_fill_in_cpu_possible_map. Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: Fix irq stack bootmem allocation.Atish Patra2-16/+25
Currently, irq stack bootmem is allocated for all possible cpus before nr_cpus value changes the list of possible cpus. As a result, there is unnecessary wastage of bootmemory. Move the irq stack bootmem allocation so that it happens after possible cpu list is modified based on nr_cpus value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: Fix cpu_possible_mask if nr_cpus is setAtish Patra3-0/+16
If kernel boot parameter nr_cpus is set, it should define the number of CPUs that can ever be available in the system i.e. cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based on the cpu_possible_mask during kernel initialization. If cpu_possible_mask is not set based on the nr_cpus value, earlier part of the kernel would be initialized using nr_cpus value leading to a kernel crash. Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids() becomes redundant and does not corrupt nr_cpu_ids value. Signed-off-by: Atish Patra <atish.patra@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64 mm: Fix more TSB sizing issuesMike Kravetz4-10/+45
Commit af1b1a9b36b8 ("sparc64 mm: Fix base TSB sizing when hugetlb pages are used") addressed the difference between hugetlb and THP pages when computing TSB sizes. The following additional issues were also discovered while working with the code. In order to save memory, THP makes use of a huge zero page. This huge zero page does not count against a task's RSS, but it does consume TSB entries. This is similar to hugetlb pages. Therefore, count huge zero page entries in hugetlb_pte_count. Accounting of THP pages is done in the routine set_pmd_at(). Unfortunately, this does not catch the case where a THP page is split. To handle this case, decrement the count in pmdp_invalidate(). pmdp_invalidate is only called when splitting a THP. However, 'sanity checks' are added in case it is ever called for other purposes. A more general issue exists with HPAGE_SIZE accounting. hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This value is used to size the TSB for HPAGE_SIZE pages. However, each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages. The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore, the number of REAL_HPAGE_SIZE pages should be used to size the huge page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used to multiply hugetlb_pte_count before sizing the TSB. Changes from V1 - Fixed build issue if hugetlb or THP not configured Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28sparc64: fix section mismatch in find_numa_latencies_for_groupPaul Gortmaker1-3/+3
To fix: WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference from the function find_numa_latencies_for_group() to the function .init.text:find_mlgroup() The function find_numa_latencies_for_group() references the function __init find_mlgroup(). This is often because find_numa_latencies_for_group lacks a __init annotation or the annotation of find_mlgroup is wrong. It turns out find_numa_latencies_for_group is only called from: static int __init numa_parse_mdesc(void) and hence we can tag find_numa_latencies_for_group with __init. In doing so we see that find_best_numa_node_for_mlgroup is only called from within __init and hence can also be marked with __init. Cc: "David S. Miller" <davem@davemloft.net> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Chris Hyser <chris.hyser@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: sparclinux@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.