aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/xen/events.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-02xen: Revert commits da72ff5bfcb0 and 72a9b186292dBoris Ostrovsky1-0/+11
Recent discussion (http://marc.info/?l=xen-devel&m=149192184523741) established that commit 72a9b186292d ("xen: Remove event channel notification through Xen PCI platform device") (and thus commit da72ff5bfcb0 ("partially revert "xen: Remove event channel notification through Xen PCI platform device"")) are unnecessary and, in fact, prevent HVM guests from booting on Xen releases prior to 4.0 Therefore we revert both of those commits. The summary of that discussion is below: Here is the brief summary of the current situation: Before the offending commit (72a9b186292): 1) INTx does not work because of the reset_watches path. 2) The reset_watches path is only taken if you have Xen > 4.0 3) The Linux Kernel by default will use vector inject if the hypervisor support. So even INTx does not work no body running the kernel with Xen > 4.0 would notice. Unless he explicitly disabled this feature either in the kernel or in Xen (and this can only be disabled by modifying the code, not user-supported way to do it). After the offending commit (+ partial revert): 1) INTx is no longer support for HVM (only for PV guests). 2) Any HVM guest The kernel will not boot on Xen < 4.0 which does not have vector injection support. Since the only other mode supported is INTx which. So based on this summary, I think before commit (72a9b186292) we were in much better position from a user point of view. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2016-09-30xen: Remove event channel notification through Xen PCI platform deviceKarimAllah Ahmed1-11/+0
Ever since commit 254d1a3f02eb ("xen/pv-on-hvm kexec: shutdown watches from old kernel") using the INTx interrupt from Xen PCI platform device for event channel notification would just lockup the guest during bootup. postcore_initcall now calls xs_reset_watches which will eventually try to read a value from XenStore and will get stuck on read_reply at XenBus forever since the platform driver is not probed yet and its INTx interrupt handler is not registered yet. That means that the guest can not be notified at this moment of any pending event channels and none of the per-event handlers will ever be invoked (including the XenStore one) and the reply will never be picked up by the kernel. The exact stack where things get stuck during xenbus_init: -xenbus_init -xs_init -xs_reset_watches -xenbus_scanf -xenbus_read -xs_single -xs_single -xs_talkv Vector callbacks have always been the favourite event notification mechanism since their introduction in commit 38e20b07efd5 ("x86/xen: event channels delivery on HVM.") and the vector callback feature has always been advertised for quite some time by Xen that's why INTx was broken for several years now without impacting anyone. Luckily this also means that event channel notification through INTx is basically dead-code which can be safely removed without impacting anybody since it has been effectively disabled for more than 4 years with nobody complaining about it (at least as far as I'm aware of). This commit removes event channel notification through Xen PCI platform device. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Julien Grall <julien.grall@citrix.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ross Lagerwall <ross.lagerwall@citrix.com> Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20xen/events: Support event channel rebind on ARMJulien Grall1-0/+11
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2013-08-09xen: Support 64-bit PV guest receiving NMIsKonrad Rzeszutek Wilk1-0/+1
This is based on a patch that Zhenzhong Duan had sent - which was missing some of the remaining pieces. The kernel has the logic to handle Xen-type-exceptions using the paravirt interface in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME - pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN - pv_cpu_ops.iret). That means the nmi handler (and other exception handlers) use the hypervisor iret. The other changes that would be neccessary for this would be to translate the NMI_VECTOR to one of the entries on the ipi_vector and make xen_send_IPI_mask_allbutself use different events. Fortunately for us commit 1db01b4903639fcfaec213701a494fe3fb2c490b (xen: Clean up apic ipi interface) implemented this and we piggyback on the cleanup such that the apic IPI interface will pass the right vector value for NMI. With this patch we can trigger NMIs within a PV guest (only tested x86_64). For this to work with normal PV guests (not initial domain) we need the domain to be able to use the APIC ops - they are already implemented to use the Xen event channels. For that to be turned on in a PV domU we need to remove the masking of X86_FEATURE_APIC. Incidentally that means kgdb will also now work within a PV guest without using the 'nokgdbroundup' workaround. Note that the 32-bit version is different and this patch does not enable that. CC: Lisa Nguyen <lisa@xenapiadmin.com> CC: Ben Guthro <benjamin.guthro@citrix.com> CC: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Fixed up per David Vrabel comments] Reviewed-by: Ben Guthro <benjamin.guthro@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2013-02-20xen: event channel arrays are xen_ulong_t and not unsigned longIan Campbell1-0/+3
On ARM we want these to be the same size on 32- and 64-bit. This is an ABI change on ARM. X86 does not change. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Keir (Xen.org) <keir@xen.org> Cc: Tim Deegan <tim@xen.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xen.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-07xen: implement IRQ_WORK_VECTOR handlerLin Ming1-0/+1
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2009-02-09xen: use our own eventchannel->irq pathJeremy Fitzhardinge1-6/+0
Rather than overloading vectors for event channels, take full responsibility for mapping an event channel to irq directly. With this patch Xen has its own irq allocator. When the kernel gets an event channel upcall, it maps the event channel number to an irq and injects it into the normal interrupt path. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23x86: drop double underscores from header guardsH. Peter Anvin1-3/+3
Drop double underscores from header guards in arch/x86/include. They are used inconsistently, and are not necessary. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86: Fix ASM_X86__ header guardsH. Peter Anvin1-3/+3
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86, um: ... and asm-x86 moveAl Viro1-0/+24
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>