| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
With some Intel processors, putting the same virtual address in the TLB
as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit
and cause the processor to issue a machine check resulting in a CPU lockup.
Unfortunately when EPT page tables use huge pages, it is possible for a
malicious guest to cause this situation.
Add a knob to mark huge pages as non-executable. When the nx_huge_pages
parameter is enabled (and we are using EPT), all huge pages are marked as
NX. If the guest attempts to execute in one of those pages, the page is
broken down into 4K pages, which are then marked executable.
This is not an issue for shadow paging (except nested EPT), because then
the host is in control of TLB flushes and the problematic situation cannot
happen. With nested EPT, again the nested guest can cause problems shadow
and direct EPT is treated in the same way.
[ tglx: Fixup default to auto and massage wording a bit ]
Originally-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:
https://bugzilla.kernel.org/show_bug.cgi?id=205195
There are other processors affected for which the erratum does not fully
disclose the impact.
This issue affects both bare-metal x86 page tables and EPT.
It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.
Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.
Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
TSX Async Abort (TAA) is a side channel vulnerability to the internal
buffers in some Intel processors similar to Microachitectural Data
Sampling (MDS). In this case, certain loads may speculatively pass
invalid data to dependent operations when an asynchronous abort
condition is pending in a TSX transaction.
This includes loads with no fault or assist condition. Such loads may
speculatively expose stale data from the uarch data structures as in
MDS. Scope of exposure is within the same-thread and cross-thread. This
issue affects all current processors that support TSX, but do not have
ARCH_CAP_TAA_NO (bit 8) set in MSR_IA32_ARCH_CAPABILITIES.
On CPUs which have their IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0,
CPUID.MD_CLEAR=1 and the MDS mitigation is clearing the CPU buffers
using VERW or L1D_FLUSH, there is no additional mitigation needed for
TAA. On affected CPUs with MDS_NO=1 this issue can be mitigated by
disabling the Transactional Synchronization Extensions (TSX) feature.
A new MSR IA32_TSX_CTRL in future and current processors after a
microcode update can be used to control the TSX feature. There are two
bits in that MSR:
* TSX_CTRL_RTM_DISABLE disables the TSX sub-feature Restricted
Transactional Memory (RTM).
* TSX_CTRL_CPUID_CLEAR clears the RTM enumeration in CPUID. The other
TSX sub-feature, Hardware Lock Elision (HLE), is unconditionally
disabled with updated microcode but still enumerated as present by
CPUID(EAX=7).EBX{bit4}.
The second mitigation approach is similar to MDS which is clearing the
affected CPU buffers on return to user space and when entering a guest.
Relevant microcode update is required for the mitigation to work. More
details on this approach can be found here:
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
The TSX feature can be controlled by the "tsx" command line parameter.
If it is force-enabled then "Clear CPU buffers" (MDS mitigation) is
deployed. The effective mitigation state can be read from sysfs.
[ bp:
- massage + comments cleanup
- s/TAA_MITIGATION_TSX_DISABLE/TAA_MITIGATION_TSX_DISABLED/g - Josh.
- remove partial TAA mitigation in update_mds_branch_idle() - Josh.
- s/tsx_async_abort_cmdline/tsx_async_abort_parse_cmdline/g
]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Transactional Synchronization Extensions (TSX) may be used on certain
processors as part of a speculative side channel attack. A microcode
update for existing processors that are vulnerable to this attack will
add a new MSR - IA32_TSX_CTRL to allow the system administrator the
option to disable TSX as one of the possible mitigations.
The CPUs which get this new MSR after a microcode upgrade are the ones
which do not set MSR_IA32_ARCH_CAPABILITIES.MDS_NO (bit 5) because those
CPUs have CPUID.MD_CLEAR, i.e., the VERW implementation which clears all
CPU buffers takes care of the TAA case as well.
[ Note that future processors that are not vulnerable will also
support the IA32_TSX_CTRL MSR. ]
Add defines for the new IA32_TSX_CTRL MSR and its bits.
TSX has two sub-features:
1. Restricted Transactional Memory (RTM) is an explicitly-used feature
where new instructions begin and end TSX transactions.
2. Hardware Lock Elision (HLE) is implicitly used when certain kinds of
"old" style locks are used by software.
Bit 7 of the IA32_ARCH_CAPABILITIES indicates the presence of the
IA32_TSX_CTRL MSR.
There are two control bits in IA32_TSX_CTRL MSR:
Bit 0: When set, it disables the Restricted Transactional Memory (RTM)
sub-feature of TSX (will force all transactions to abort on the
XBEGIN instruction).
Bit 1: When set, it disables the enumeration of the RTM and HLE feature
(i.e. it will make CPUID(EAX=7).EBX{bit4} and
CPUID(EAX=7).EBX{bit11} read as 0).
The other TSX sub-feature, Hardware Lock Elision (HLE), is
unconditionally disabled by the new microcode but still enumerated
as present by CPUID(EAX=7).EBX{bit4}, unless disabled by
IA32_TSX_CTRL_MSR[1] - TSX_CTRL_CPUID_CLEAR.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the VMWare guest support:
- Unbreak VMWare platform detection which got wreckaged by converting
an integer constant to a string constant.
- Fix the clang build of the VMWAre hypercall by explicitely
specifying the ouput register for INL instead of using the short
form"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
|
|
If the "virtualize APIC accesses" VM-execution control is set in the
VMCS, the APIC virtualization hardware is triggered when a page walk
in VMX non-root mode terminates at a PTE wherein the address of the 4k
page frame matches the APIC-access address specified in the VMCS. On
hardware, the APIC-access address may be any valid 4k-aligned physical
address.
KVM's nVMX implementation enforces the additional constraint that the
APIC-access address specified in the vmcs12 must be backed by
a "struct page" in L1. If not, L0 will simply clear the "virtualize
APIC accesses" VM-execution control in the vmcs02.
The problem with this approach is that the L1 guest has arranged the
vmcs12 EPT tables--or shadow page tables, if the "enable EPT"
VM-execution control is clear in the vmcs12--so that the L2 guest
physical address(es)--or L2 guest linear address(es)--that reference
the L2 APIC map to the APIC-access address specified in the
vmcs12. Without the "virtualize APIC accesses" VM-execution control in
the vmcs02, the APIC accesses in the L2 guest will directly access the
APIC-access page in L1.
When there is no mapping whatsoever for the APIC-access address in L1,
the L2 VM just loses the intended APIC virtualization. However, when
the APIC-access address is mapped to an MMIO region in L1, the L2
guest gets direct access to the L1 MMIO device. For example, if the
APIC-access address specified in the vmcs12 is 0xfee00000, then L2
gets direct access to L1's APIC.
Since this vmcs12 configuration is something that KVM cannot
faithfully emulate, the appropriate response is to exit to userspace
with KVM_INTERNAL_ERROR_EMULATION.
Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12")
Reported-by: Dan Cross <dcross@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Cache whether XSAVES is enabled in the guest by adding xsaves_enabled to
vcpu->arch.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: If4638e0901c28a4494dad2e103e2c075e8ab5d68
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The crash_copy_backup_region() function is unused so remove it.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: dhowells@redhat.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lkml.kernel.org/r/20191017094347.20327-3-lijiang@redhat.com
|
|
Replace the explicit declaration of "u64 reprogram_pmi" with the generic
macro DECLARE_BITMAP for all possible appropriate number of bits.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generally, APICv for all vcpus in the VM are enable/disable in the same
manner. So, get_enable_apicv() should represent APICv status of the VM
instead of each VCPU.
Modify kvm_x86_ops.get_enable_apicv() to take struct kvm as parameter
instead of struct kvm_vcpu.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle caching CR3 (from VMX's VMCS) into struct kvm_vcpu via the common
cache_reg() callback and drop the dedicated decache_cr3(). The name
decache_cr3() is somewhat confusing as the caching behavior of CR3
follows that of GPRs, RFLAGS and PDPTRs, (handled via cache_reg()), and
has nothing in common with the caching behavior of CR0/CR4 (whose
decache_cr{0,4}_guest_bits() likely provided the 'decache' verbiage).
This would effectivel adds a BUG() if KVM attempts to cache CR3 on SVM.
Change it to a WARN_ON_ONCE() -- if the cache never requires filling,
the value is already in the right place -- and opportunistically add one
in VMX to provide an equivalent check.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that indexing into arch.regs is either protected by WARN_ON_ONCE or
done with hardcoded enums, combine all definitions for registers that
are tracked by regs_avail and regs_dirty into 'enum kvm_reg'. Having a
single enum type will simplify additional cleanup related to regs_avail
and regs_dirty.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT
definition, but expects it to be an integer. However, when it was moved
to the new vmware.h include file, it was changed to be a string to better
fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the
platform detection VMWARE_PORT functionality.
Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB
definitions to be integers, and use __stringify() for their stringified
form when needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
LLVM's assembler doesn't accept the short form INL instruction:
inl (%%dx)
but instead insists on the output register to be explicitly specified.
This was previously fixed for the VMWARE_PORT macro. Fix it also for
the VMWARE_HYPERCALL macro.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
arch_faults_on_old_pte is a helper to indicate that it might cause page
fault when accessing old pte. But on x86, there is feature to setting
pte access flag by hardware. Hence implement an overriding stub which
always returns false.
Signed-off-by: Jia He <justin.he@arm.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Convert the remaining 32bit users and remove the GLOBAL macro finally.
In particular, this means to use SYM_ENTRY for the singlestepping hack
region.
Exclude the global definition of GLOBAL from x86 too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191011115108.12392-20-jslaby@suse.cz
|
|
Introduce new C macros for annotations of functions and data in
assembly. There is a long-standing mess in macros like ENTRY, END,
ENDPROC and similar. They are used in different manners and sometimes
incorrectly.
So introduce macros with clear use to annotate assembly as follows:
a) Support macros for the ones below
SYM_T_FUNC -- type used by assembler to mark functions
SYM_T_OBJECT -- type used by assembler to mark data
SYM_T_NONE -- type used by assembler to mark entries of unknown type
They are defined as STT_FUNC, STT_OBJECT, and STT_NOTYPE
respectively. According to the gas manual, this is the most portable
way. I am not sure about other assemblers, so this can be switched
back to %function and %object if this turns into a problem.
Architectures can also override them by something like ", @function"
if they need.
SYM_A_ALIGN, SYM_A_NONE -- align the symbol?
SYM_L_GLOBAL, SYM_L_WEAK, SYM_L_LOCAL -- linkage of symbols
b) Mostly internal annotations, used by the ones below
SYM_ENTRY -- use only if you have to (for non-paired symbols)
SYM_START -- use only if you have to (for paired symbols)
SYM_END -- use only if you have to (for paired symbols)
c) Annotations for code
SYM_INNER_LABEL_ALIGN -- only for labels in the middle of code
SYM_INNER_LABEL -- only for labels in the middle of code
SYM_FUNC_START_LOCAL_ALIAS -- use where there are two local names for
one function
SYM_FUNC_START_ALIAS -- use where there are two global names for one
function
SYM_FUNC_END_ALIAS -- the end of LOCAL_ALIASed or ALIASed function
SYM_FUNC_START -- use for global functions
SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment
SYM_FUNC_START_LOCAL -- use for local functions
SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o
alignment
SYM_FUNC_START_WEAK -- use for weak functions
SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment
SYM_FUNC_END -- the end of SYM_FUNC_START_LOCAL, SYM_FUNC_START,
SYM_FUNC_START_WEAK, ...
For functions with special (non-C) calling conventions:
SYM_CODE_START -- use for non-C (special) functions
SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o
alignment
SYM_CODE_START_LOCAL -- use for local non-C (special) functions
SYM_CODE_START_LOCAL_NOALIGN -- use for local non-C (special)
functions, w/o alignment
SYM_CODE_END -- the end of SYM_CODE_START_LOCAL or SYM_CODE_START
d) For data
SYM_DATA_START -- global data symbol
SYM_DATA_START_LOCAL -- local data symbol
SYM_DATA_END -- the end of the SYM_DATA_START symbol
SYM_DATA_END_LABEL -- the labeled end of SYM_DATA_START symbol
SYM_DATA -- start+end wrapper around simple global data
SYM_DATA_LOCAL -- start+end wrapper around simple local data
==========
The macros allow to pair starts and ends of functions and mark functions
correctly in the output ELF objects.
All users of the old macros in x86 are converted to use these in further
patches.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-2-jslaby@suse.cz
|
|
Decode Xen and KVM's emulate-prefix signature by x86 insn decoder.
It is called "prefix" but actually not x86 instruction prefix, so
this adds insn.emulate_prefix_size field instead of reusing
insn.prefixes.
If x86 decoder finds a special sequence of instructions of
XEN_EMULATE_PREFIX and 'ud2a; .ascii "kvm"', it just counts the
length, set insn.emulate_prefix_size and fold it with the next
instruction. In other words, the signature and the next instruction
is treated as a single instruction.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: xen-devel@lists.xenproject.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/156777564986.25081.4964537658500952557.stgit@devnote2
|
|
Gather the emulate prefixes, which forcibly make the following
instruction emulated on virtualization, in one place.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: xen-devel@lists.xenproject.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/156777563917.25081.7286628561790289995.stgit@devnote2
|
|
Use __stringify() at __ASM_FORM() so that user can pass
code including macros to __ASM_FORM().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: xen-devel@lists.xenproject.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/156777562873.25081.2288083344657460959.stgit@devnote2
|
|
Pull x86 fixes from Ingo Molnar:
"A handful of fixes: a kexec linking fix, an AMD MWAITX fix, a vmware
guest support fix when built under Clang, and new CPU model number
definitions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Comet Lake to the Intel CPU models header
lib/string: Make memzero_explicit() inline instead of external
x86/cpu/vmware: Use the full form of INL in VMWARE_PORT
x86/asm: Fix MWAITX C-state hint value
|
|
Pull x86 license tag fixlets from Ingo Molnar:
"Fix a couple of SPDX tags in x86 headers to follow the canonical
pattern"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Use the correct SPDX License Identifier in headers
|
|
We call native_set_fixmap indirectly through the function pointer
struct pv_mmu_ops::set_fixmap, which expects the first parameter to be
'unsigned' instead of 'enum fixed_addresses'. This patch changes the
function type for native_set_fixmap to match the pointer, which fixes
indirect call mismatches with Control-Flow Integrity (CFI) checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Define a weak function in COND_SYSCALL instead of a weak alias to
sys_ni_syscall(), which has an incompatible type. This fixes indirect
call mismatches with Control-Flow Integrity (CFI) checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-6-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
x86 has special handling for COMPAT_SYSCALL_DEFINEx, but there was
no override for COMPAT_SYSCALL_DEFINE0. Wire it up so that we can
use it for rt_sigreturn.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-3-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid type mismatches
with Control-Flow Integrity (CFI) checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-2-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Comet Lake is the new 10th Gen Intel processor. Add two new CPU model
numbers to the Intel family list.
The CPU model numbers are not published in the SDM yet but they come
from an authoritative internal source.
[ bp: Touch up commit message. ]
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: ak@linux.intel.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1570549810-25049-2-git-send-email-kan.liang@linux.intel.com
|
|
As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.
Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.
This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.
[ bp: Fixup comment in delay_mwaitx() and massage. ]
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
AMD Zen 2 introduces a new RDPRU instruction which is used to give
access to some processor registers that are typically only accessible
when the privilege level is zero.
ECX is used as the implicit register to specify which register to read.
RDPRU places the specified register’s value into EDX:EAX.
For example, the RDPRU instruction can be used to read MPERF and APERF
at CPL > 0.
Add the feature bit so it is visible in /proc/cpuinfo.
Details are available in the AMD64 Architecture Programmer’s Manual:
https://www.amd.com/system/files/TechDocs/24594.pdf
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: ak@linux.intel.com
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: robert.hu@linux.intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191007204839.5727.10803.stgit@localhost.localdomain
|
|
In commit 9f79b78ef744 ("Convert filldir[64]() from __put_user() to
unsafe_put_user()") I made filldir() use unsafe_put_user(), which
improves code generation on x86 enormously.
But because we didn't have a "unsafe_copy_to_user()", the dirent name
copy was also done by hand with unsafe_put_user() in a loop, and it
turns out that a lot of other architectures didn't like that, because
unlike x86, they have various alignment issues.
Most non-x86 architectures trap and fix it up, and some (like xtensa)
will just fail unaligned put_user() accesses unconditionally. Which
makes that "copy using put_user() in a loop" not work for them at all.
I could make that code do explicit alignment etc, but the architectures
that don't like unaligned accesses also don't really use the fancy
"user_access_begin/end()" model, so they might just use the regular old
__copy_to_user() interface.
So this commit takes that looping implementation, turns it into the x86
version of "unsafe_copy_to_user()", and makes other architectures
implement the unsafe copy version as __copy_to_user() (the same way they
do for the other unsafe_xyz() accessor functions).
Note that it only does this for the copying _to_ user space, and we
still don't have a unsafe version of copy_from_user().
That's partly because we have no current users of it, but also partly
because the copy_from_user() case is slightly different and cannot
efficiently be implemented in terms of a unsafe_get_user() loop (because
gcc can't do asm goto with outputs).
It would be trivial to do this using "rep movsb", which would work
really nicely on newer x86 cores, but really badly on some older ones.
Al Viro is looking at cleaning up all our user copy routines to make
this all a non-issue, but for now we have this simple-but-stupid version
for x86 that works fine for the dirent name copy case because those
names are short strings and we simply don't need anything fancier.
Fixes: 9f79b78ef744 ("Convert filldir[64]() from __put_user() to unsafe_put_user()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The references in the is_uvX_hub() function uses the hub_info pointer
which will be NULL when the system is hubless. This change avoids
that NULL dereference. It is also an optimization in performance.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190910145840.294981941@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Indicate to UV user utilities that UV hubless support is available on
this system via the existing /proc infterface. The current interface is
maintained with the addition of new /proc leaves ("hubbed", "hubless",
and "oemid") that contain the specific type of UV arch this one is.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190910145840.055590900@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a return code to the UV BIOS init function that indicates the
successful initialization of the kernel/BIOS callback interface.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190910145839.895739629@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Return the type of UV hubless system for UV specific code that depends
on that. Add a function to convert UV system type to bit pattern needed
for is_uv_hubless().
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Justin Ernst <justin.ernst@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190910145839.814880843@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
|
|
The FPU emulation code is old and fragile in places, try to limit its
use to builds for CPUs that actually use it. As far as I can tell,
this is only true for i486sx compatibles, including the Cyrix 486SLC,
AMD Am486SX and ÉLAN SC410, UMC U5S amd DM&P VortexSX86, all of which
were relatively short-lived and got replaced with i486DX compatible
processors soon after introduction, though some of the embedded versions
remained available much longer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bill Metzenthen <billm@melbpc.org.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191001142344.1274185-2-arnd@arndb.de
|
|
Correct the SPDX License Identifier format in a couple of headers.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/697848ff866ade29e78e872525d7a3067642fd37.1555427420.git.nishadkamdar@gmail.com
|
|
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
|
|
Pull more KVM updates from Paolo Bonzini:
"x86 KVM changes:
- The usual accuracy improvements for nested virtualization
- The usual round of code cleanups from Sean
- Added back optimizations that were prematurely removed in 5.2 (the
bare minimum needed to fix the regression was in 5.3-rc8, here
comes the rest)
- Support for UMWAIT/UMONITOR/TPAUSE
- Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
- Tell Windows guests if SMT is disabled on the host
- More accurate detection of vmexit cost
- Revert a pvqspinlock pessimization"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits)
KVM: nVMX: cleanup and fix host 64-bit mode checks
KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386
KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot()
KVM: x86: Drop ____kvm_handle_fault_on_reboot()
KVM: VMX: Add error handling to VMREAD helper
KVM: VMX: Optimize VMX instruction error and fault handling
KVM: x86: Check kvm_rebooting in kvm_spurious_fault()
KVM: selftests: fix ucall on x86
Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"
kvm: nvmx: limit atomic switch MSRs
kvm: svm: Intercept RDPRU
kvm: x86: Add "significant index" flag to a few CPUID leaves
KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero
KVM: x86/mmu: Explicitly track only a single invalid mmu generation
KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call"
KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first""
KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""
KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints""
...
|
|
Currently, we are overloading SPTE_SPECIAL_MASK to mean both
"A/D bits unavailable" and MMIO, where the difference between the
two is determined by mio_mask and mmio_value.
However, the next patch will need two bits to distinguish
availability of A/D bits from write protection. So, while at
it give MMIO its own bit pattern, and move the two bits from
bit 62 to bits 52..53 since Intel is allocating EPT page table
bits from the top.
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the kvm_rebooting check from VMX/SVM instruction exception fixup
now that kvm_spurious_fault() conditions its BUG() on !kvm_rebooting.
Because the 'cleanup_insn' functionally is also gone, deferring to
kvm_spurious_fault() means __kvm_handle_fault_on_reboot() can eliminate
its .fixup code entirely and have its exception table entry branch
directly to the call to kvm_spurious_fault().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the variation of __kvm_handle_fault_on_reboot() that accepts a
post-fault cleanup instruction now that its sole user (VMREAD) uses
a different method for handling faults.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking
BUG(), as opposed to assuming the caller has already done so. Letting
kvm_spurious_fault() be called "directly" will allow VMX to better
optimize its low level assembly flows.
As a happy side effect, kvm_spurious_fault() no longer needs to be
marked as a dead end since it doesn't unconditionally BUG().
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix spelling, consistent parenthesis and grammar - and also clarify
the language where needed.
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The function involved should be pte_offset_map_lock() and we never have
function pmd_offset_map_lock defined.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190925014453.20236-1-richardw.yang@linux.intel.com
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem
cache for page table allocations on several architectures that do not use
PAGE_SIZE tables for one or more levels of the page table hierarchy.
Most architectures do not implement these functions and use __weak default
NOP implementation of pgd_cache_init(). Since there is no such default
for pgtable_cache_init(), its empty stub is duplicated among most
architectures.
Rename the definitions of pgd_cache_init() to pgtable_cache_init() and
drop empty stubs of pgtable_cache_init().
Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Allowing an unlimited number of MSRs to be specified via the VMX
load/store MSR lists (e.g., vm-entry MSR load list) is bad for two
reasons. First, a guest can specify an unreasonable number of MSRs,
forcing KVM to process all of them in software. Second, the SDM bounds
the number of MSRs allowed to be packed into the atomic switch MSR lists.
Quoting the "Miscellaneous Data" section in the "VMX Capability
Reporting Facility" appendix:
"Bits 27:25 is used to compute the recommended maximum number of MSRs
that should appear in the VM-exit MSR-store list, the VM-exit MSR-load
list, or the VM-entry MSR-load list. Specifically, if the value bits
27:25 of IA32_VMX_MISC is N, then 512 * (N + 1) is the recommended
maximum number of MSRs to be included in each list. If the limit is
exceeded, undefined processor behavior may result (including a machine
check during the VMX transition)."
Because KVM needs to protect itself and can't model "undefined processor
behavior", arbitrarily force a VM-entry to fail due to MSR loading when
the MSR load list is too large. Similarly, trigger an abort during a VM
exit that encounters an MSR load list or MSR store list that is too large.
The MSR list size is intentionally not pre-checked so as to maintain
compatibility with hardware inasmuch as possible.
Test these new checks with the kvm-unit-test "x86: nvmx: test max atomic
switch MSRs".
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The RDPRU instruction gives the guest read access to the IA32_APERF
MSR and the IA32_MPERF MSR. According to volume 3 of the APM, "When
virtualization is enabled, this instruction can be intercepted by the
Hypervisor. The intercept bit is at VMCB byte offset 10h, bit 14."
Since we don't enumerate the instruction in KVM_SUPPORTED_CPUID,
intercept it and synthesize #UD.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Drew Schmitt <dasch@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Toggle mmu_valid_gen between '0' and '1' instead of blindly incrementing
the generation. Because slots_lock is held for the entire duration of
zapping obsolete pages, it's impossible for there to be multiple invalid
generations associated with shadow pages at any given time.
Toggling between the two generations (valid vs. invalid) allows changing
mmu_valid_gen from an unsigned long to a u8, which reduces the size of
struct kvm_mmu_page from 160 to 152 bytes on 64-bit KVM, i.e. reduces
KVM's memory footprint by 8 bytes per shadow page.
Set sp->mmu_valid_gen before it is added to active_mmu_pages.
Functionally this has no effect as kvm_mmu_alloc_page() has a single
caller that sets sp->mmu_valid_gen soon thereafter, but visually it is
jarring to see a shadow page being added to the list without its
mmu_valid_gen first being set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
Paolo Bonzini
Vineela Tummalapalli
Pawan Gupta
Linus Torvalds
Jim Mattson
Aaron Lewis
Lianbo Jiang
Like Xu
Suthikulpanit, Suravee
Sean Christopherson
Thomas Hellstrom
Jia He
Jiri Slaby
Masami Hiramatsu
Sami Tolvanen
Andy Lutomirski
Kan Liang
Janakarajan Natarajan
Babu Moger
Mike Travis
Arnd Bergmann
Nishad Kamdar
Ingo Molnar
Wei Yang
Mike Rapoport
Nicholas Piggin
Marc Orr