aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/include
AgeCommit message (Collapse)AuthorFilesLines
2011-07-14x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIASLen Brown1-0/+3
Since 2.6.36 (23016bf0d25), Linux prints the existence of "epb" in /proc/cpuinfo, Since 2.6.38 (d5532ee7b40), the x86_energy_perf_policy(8) utility has been available in-tree to update MSR_IA32_ENERGY_PERF_BIAS. However, the typical BIOS fails to initialize the MSR, presumably because this is handled by high-volume shrink-wrap operating systems... Linux distros, on the other hand, do not yet invoke x86_energy_perf_policy(8). As a result, WSM-EP, SNB, and later hardware from Intel will run in its default hardware power-on state (performance), which assumes that users care for performance at all costs and not for energy efficiency. While that is fine for performance benchmarks, the hardware's intended default operating point is "normal" mode... Initialize the MSR to the "normal" by default during kernel boot. x86_energy_perf_policy(8) is available to change the default after boot, should the user have a different preference. Signed-off-by: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1107140051020.18606@x980 Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org>
2011-07-14memblock, x86: Replace memblock_x86_reserve/free_range() with generic onesTejun Heo1-7/+0
Other than sanity check and debug message, the x86 specific version of memblock reserve/free functions are simple wrappers around the generic versions - memblock_reserve/free(). This patch adds debug messages with caller identification to the generic versions and replaces x86 specific ones and kills them. arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty after this change and removed. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config optionTejun Heo1-2/+0
From 6839454ae63f1eb21e515c10229ca95c22955fec Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Thu, 14 Jul 2011 11:22:17 +0200 Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled together with other MEMBLOCK options. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110714094603.GH3455@htj.dyndns.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Use absent_pages_in_range() instead of memblock_x86_hole_size()Tejun Heo1-2/+0
memblock_x86_hole_size() calculates the total size of holes in a given range according to memblock and is used by numa emulation code and numa_meminfo_cover_memory(). Since conversion to MEMBLOCK_NODE_MAP, absent_pages_in_range() also uses memblock and gives the same result. This patch replaces memblock_x86_hole_size() uses with absent_pages_in_range(). After the conversion the x86 function doesn't have any user left and is killed. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-12-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Reimplement memblock_find_dma_reserve() using iteratorsTejun Heo1-2/+0
memblock_find_dma_reserve() wants to find out how much memory is reserved under MAX_DMA_PFN. memblock_x86_memory_[free_]in_range() are used to find out the amounts of all available and free memory in the area, which are then subtracted to find out the amount of reservation. memblock_x86_memblock_[free_]in_range() are implemented using __memblock_x86_memory_in_range() which builds ranges from memblock and then count them, which is rather unnecessarily complex. This patch open codes the counting logic directly in memblock_find_dma_reserve() using memblock iterators and removes now unused __memblock_x86_memory_in_range() and find_range_array(). Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-11-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Replace __get_free_all_memory_range() with for_each_free_mem_range()Tejun Heo1-3/+0
__get_free_all_memory_range() walks memblock, calculates free memory areas and fills in the specified range. It can be easily replaced with for_each_free_mem_range(). Convert free_low_memory_core_early() and add_highpages_with_active_regions() to for_each_free_mem_range(). This leaves __get_free_all_memory_range() without any user. Kill it and related functions. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-10-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Make free_all_memory_core_early() explicitly free lowmem onlyTejun Heo1-1/+0
nomemblock is currently used only by x86 and on x86_32 free_all_memory_core_early() silently freed only the low mem because get_free_all_memory_range() in arch/x86/mm/memblock.c implicitly limited range to max_low_pfn. Rename free_all_memory_core_early() to free_low_memory_core_early() and make it call __get_free_all_memory_range() and limit the range to max_low_pfn explicitly. This makes things clearer and also is consistent with the bootmem behavior. This leaves get_free_all_memory_range() without any user. Kill it. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-9-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Replace memblock_x86_find_in_range_size() with for_each_free_mem_range()Tejun Heo1-3/+0
setup_bios_corruption_check() and memtest do_one_pass() open code memblock free area iteration using memblock_x86_find_in_range_size(). Convert them to use for_each_free_mem_range() instead. This leaves memblock_x86_find_in_range_size() and memblock_x86_check_reserved_size() unused. Kill them. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-8-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Use __memblock_alloc_base() in early_reserve_e820()Tejun Heo1-1/+1
early_reserve_e820() implements its own ad-hoc early allocator using memblock_x86_find_in_range_size(). Use __memblock_alloc_base() instead and remove the unnecessary @startt parameter (it's top-down allocation anyway). Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-6-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Use HAVE_MEMBLOCK_NODE_MAPTejun Heo1-2/+0
From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Thu, 14 Jul 2011 11:22:16 +0200 Convert x86 to HAVE_MEMBLOCK_NODE_MAP. The only difference in memory handling is that allocations can't no longer cross node boundaries whether they're node affine or not, which shouldn't matter at all. This conversion will enable further simplification of boot memory handling. -v2: Fix build failure on !NUMA configurations discovered by hpa. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110714094423.GG3455@htj.dyndns.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Replace memblock_x86_find_in_range_node() with generic memblock callsTejun Heo1-1/+0
With the previous changes, generic NUMA aware memblock API has feature parity with memblock_x86_find_in_range_node(). There currently are two users - x86 setup_node_data() and __alloc_memory_core_early() in nobootmem.c. This patch converts the former to use memblock_alloc_nid() and the latter memblock_find_range_in_node(), and kills memblock_x86_find_in_range_node() and related functions including find_memory_early_core_early() in page_alloc.c. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310460395-30913-9-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14KVM guest: Add a pv_ops stub for steal timeGlauber Costa2-0/+10
This patch adds a function pointer in one of the many paravirt_ops structs, to allow guests to register a steal time function. Besides a steal time function, we also declare two jump_labels. They will be used to allow the steal time code to be easily bypassed when not in use. Signed-off-by: Glauber Costa <glommer@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Eric B Munson <emunson@mgebm.net> CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-14KVM: Steal time implementationGlauber Costa2-0/+13
To implement steal time, we need the hypervisor to pass the guest information about how much time was spent running other processes outside the VM, while the vcpu had meaningful work to do - halt time does not count. This information is acquired through the run_delay field of delayacct/schedstats infrastructure, that counts time spent in a runqueue but not running. Steal time is a per-cpu information, so the traditional MSR-based infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the memory area address containing information about steal time This patch contains the hypervisor part of the steal time infrasructure, and can be backported independently of the guest portion. [avi, yongjie: export delayacct_on, to avoid build failures in some configs] Signed-off-by: Glauber Costa <glommer@redhat.com> Tested-by: Eric B Munson <emunson@mgebm.net> CC: Rik van Riel <riel@redhat.com> CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-13clocksource: Replace vread with generic arch dataAndy Lutomirski1-0/+16
The vread field was bloating struct clocksource everywhere except x86_64, and I want to change the way this works on x86_64, so let's split it out into per-arch data. Cc: x86@kernel.org Cc: Clemens Ladisch <clemens@ladisch.de> Cc: linux-ia64@vger.kernel.org Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/3ae5ec76a168eaaae63f08a2a1060b91aa0b7759.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86: Make alternative instruction pointers relativeAndy Lutomirski3-10/+10
This save a few bytes on x86-64 and means that future patches can apply alternatives to unrelocated code. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/ff64a6b9a1a3860ca4a7b8b6dc7b4754f9491cd7.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86-64: Improve vsyscall emulation CS and RIP handlingAndy Lutomirski1-12/+0
Three fixes here: - Send SIGSEGV if called from compat code or with a funny CS. - Don't BUG on impossible addresses. - Add a missing local_irq_disable. This patch also removes an unused variable. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6fb2b13ab39b743d1e4f466eef13425854912f7f.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86, mm: s/PAGES_PER_ELEMENT/PAGES_PER_SECTION/Tejun Heo1-3/+3
DISCONTIGMEM on x86-32 implements pfn -> nid mapping similarly to SPARSEMEM; however, it calls each mapping unit ELEMENT instead of SECTION. This patch renames it to SECTION so that PAGES_PER_SECTION is valid for both DISCONTIGMEM and SPARSEMEM. This will be used by the next patch to implement mapping granularity check. This patch is trivial constant rename. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074422.GA2872@htj.dyndns.org Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12percpu: Fixup __this_cpu_xchg* operationsChristoph Lameter1-6/+5
Somehow we got into a situation where the __this_cpu_xchg() operations were not defined in the same way as this_cpu_xchg() and friends. I had some build failures under 32 bit that were addressed by these fixes. Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-07-12KVM: KVM Steal time guest/host interfaceGlauber Costa1-0/+9
To implement steal time, we need the hypervisor to pass the guest information about how much time was spent running other processes outside the VM. This is per-vcpu, and using the kvmclock structure for that is an abuse we decided not to make. In this patchset, I am introducing a new msr, KVM_MSR_STEAL_TIME, that holds the memory area address containing information about steal time This patch contains the headers for it. I am keeping it separate to facilitate backports to people who wants to backport the kernel part but not the hypervisor, or the other way around. Signed-off-by: Glauber Costa <glommer@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Eric B Munson <emunson@mgebm.net> CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: Add constant to represent KVM MSRs enabled bit in guest/host interfaceGlauber Costa1-0/+1
This patch is simple, put in a different commit so it can be more easily shared between guest and hypervisor. It just defines a named constant to indicate the enable bit for KVM-specific MSRs. Signed-off-by: Glauber Costa <glommer@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Eric B Munson <emunson@mgebm.net> CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> CC: Peter Zijlstra <peterz@infradead.org> CC: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: MMU: Adjust shadow paging to work when SMEP=1 and CR0.WP=0Avi Kivity1-0/+1
When CR0.WP=0, we sometimes map user pages as kernel pages (to allow the kernel to write to them). Unfortunately this also allows the kernel to fetch from these pages, even if CR4.SMEP is set. Adjust for this by also setting NX on the spte in these circumstances. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: Remove RDWRGSFS bit from CR4_RESERVED_BITSYang, Wei2-1/+2
This patch removes RDWRGSFS bit from CR4_RESERVED_BITS. Signed-off-by: Yang, Wei <wei.y.yang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: Remove SMEP bit from CR4_RESERVED_BITSYang, Wei Y1-1/+1
This patch removes SMEP bit from CR4_RESERVED_BITS. Signed-off-by: Yang, Wei <wei.y.yang@intel.com> Signed-off-by: Shan, Haitao <haitao.shan@intel.com> Signed-off-by: Li, Xin <xin.li@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: x86 emulator: fold decode_cache into x86_emulate_ctxtAvi Kivity1-24/+20
This saves a lot of pointless casts x86_emulate_ctxt and decode_cache. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: x86 emulator: rename decode_cache::eip to _eipAvi Kivity1-1/+1
The name eip conflicts with a field of the same name in x86_emulate_ctxt, which we plan to fold decode_cache into. The name _eip is unfortunate, but what's really needed is a refactoring here, not a better name. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: vmcs12 checks on nested entryNadav Har'El1-0/+8
This patch adds a bunch of tests of the validity of the vmcs12 fields, according to what the VMX spec and our implementation allows. If fields we cannot (or don't want to) honor are discovered, an entry failure is emulated. According to the spec, there are two types of entry failures: If the problem was in vmcs12's host state or control fields, the VMLAUNCH instruction simply fails. But a problem is found in the guest state, the behavior is more similar to that of an exit. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Exiting from L2 to L1Nadav Har'El1-0/+4
This patch implements nested_vmx_vmexit(), called when the nested L2 guest exits and we want to run its L1 parent and let it handle this exit. Note that this will not necessarily be called on every L2 exit. L0 may decide to handle a particular exit on its own, without L1's involvement; In that case, L0 will handle the exit, and resume running L2, without running L1 and without calling nested_vmx_vmexit(). The logic for deciding whether to handle a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(), will appear in a separate patch below. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Success/failure of VMX instructions.Nadav Har'El1-0/+31
VMX instructions specify success or failure by setting certain RFLAGS bits. This patch contains common functions to do this, and they will be used in the following patches which emulate the various VMX instructions. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Implement reading and writing of VMX MSRsNadav Har'El1-0/+12
When the guest can use VMX instructions (when the "nested" module option is on), it should also be able to read and write VMX MSRs, e.g., to query about VMX capabilities. This patch adds this support. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: nVMX: Allow setting the VMXE bit in CR4Nadav Har'El1-1/+1
This patch allows the guest to enable the VMXE bit in CR4, which is a prerequisite to running VMXON. Whether to allow setting the VMXE bit now depends on the architecture (svm or vmx), so its checking has moved to kvm_x86_ops->set_cr4(). This function now returns an int: If kvm_x86_ops->set_cr4() returns 1, __kvm_set_cr4() will also return 1, and this will cause kvm_set_cr4() will throw a #GP. Turning on the VMXE bit is allowed only when the nested VMX feature is enabled, and turning it off is forbidden after a vmxon. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: x86 emulator: Avoid clearing the whole decode_cacheTakuya Yoshikawa1-2/+3
During tracing the emulator, we noticed that init_emulate_ctxt() sometimes took a bit longer time than we expected. This patch is for mitigating the problem by some degree. By looking into the function, we soon notice that it clears the whole decode_cache whose size is about 2.5K bytes now. Furthermore, most of the bytes are taken for the two read_cache arrays, which are used only by a few instructions. Considering the fact that we are not assuming the cache arrays have been cleared when we store actual data, we do not need to clear the arrays: 2K bytes elimination. In addition, we can avoid clearing the fetch_cache and regs arrays. This patch changes the initialization not to clear the arrays. On our 64-bit host, init_emulate_ctxt() becomes 0.3 to 0.5us faster with this patch applied. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-12KVM: MMU: remove the arithmetic of parent pte rmapXiao Guangrong1-6/+1
Parent pte rmap and page rmap are very similar, so use the same arithmetic for them Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: MMU: abstract the operation of rmapXiao Guangrong1-1/+1
Abstract the operation of rmap to spte_list, then we can use it for the reverse mapping of parent pte in the later patch Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: MMU: optimize pte write path if don't have protected spXiao Guangrong1-0/+1
Simply return from kvm_mmu_pte_write path if no shadow page is write-protected, then we can avoid to walk all shadow pages and hold mmu-lock Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: VMX: Move VMREAD cleanup to exception handlerAvi Kivity1-1/+5
We clean up a failed VMREAD by clearing the output register. Do it in the exception handler instead of unconditionally. This is worthwhile since there are more than a hundred call sites. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-12KVM: x86 emulator: Stop passing ctxt->ops as arg of emul functionsTakuya Yoshikawa1-2/+1
Dereference it in the actual users. This not only cleans up the emulator but also makes it easy to convert the old emulation functions to the new em_xxx() form later. Note: Remove some inline keywords to let the compiler decide inlining. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-07-11xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.Konrad Rzeszutek Wilk1-2/+3
Since they are only called once and the rest of the pci_xen_* functions follow the same pattern of setup. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-07tracing, x86/irq: Do not trace arch_local_{*,irq_*}() functionsSteven Rostedt1-5/+6
I triggered a triple fault with gcc 4.5.1 because it did not honor the inline annotation to arch_local_save_flags() function and that function was added to the pool of functions traced by the function tracer. When preempt_schedule() called arch_local_save_flags() (called by irqs_disabled()), it was traced, but the first thing the function tracer does is disable preemption. When it enables preemption, the NEED_RESCHED flag will not have been cleared and the preemption check will trigger the call to preempt_schedule() again. Although the dynamic function tracer crashed immediately, the static version of the function tracer (CONFIG_DYNAMIC_FTRACE is not set) actually was able to show where the problem was. swapper-1 3.N.. 103885us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103886us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103887us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule swapper-1 3.N.. 103888us : arch_local_save_flags <-preempt_schedule It went on for a while before it triple faulted with a corrupted stack. The arch_local_save_flags and arch_local_irq_* functions should not be traced. Even though they are marked as inline, gcc may still make them a function and enable tracing of them. The simple solution is to just mark them as notrace. I had to add the <linux/types.h> for this file to include the notrace tag. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20110702033852.733414762@goodmis.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-07Merge branch 'iommu-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into core/iommuIngo Molnar3-669/+0
2011-07-06x86, olpc-xo1-sci: Add GPE handler and ebook switch functionalityDaniel Drake1-2/+3
The EC in the OLPC XO-1 delivers GPE events to provide various notifications. Add the basic code for GPE/EC event processing and enable the ebook switch, which can be used as a wakeup source. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-8-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc: EC SCI wakeup mask functionalityDaniel Drake1-6/+25
Update the EC SCI masks with recent additions. Add functions to query SCI events and set the wakeup mask, to be used by followup patches. Add functions to tweak an event mask used to select certain EC events as a system wakeup source. Also add a function to determine if EC wakeup functionality is available, as this depends on child drivers (different for each laptop model) to configure the SCI interrupt. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-7-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-06x86, olpc: Add XO-1 suspend/resume supportDaniel Drake1-3/+12
Add code needed for basic suspend/resume of the XO-1 laptop. Based on earlier work by Jordan Crouse, Andres Salomon, and others. This patch incorporates all earlier feedback from Thomas Gleixner. To clarify a certain point (now more obvious in the code itself): On resume, OpenFirmware returns execution to Linux in protected mode with a kernel-compatible GDT already set up. The changes and simplifications suggested have all been included. Signed-off-by: Daniel Drake <dsd@laptop.org> Link: http://lkml.kernel.org/r/1309019658-1712-5-git-send-email-dsd@laptop.org Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-03Merge branch 'perf/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/coreIngo Molnar1-0/+5
2011-07-02x86: Save stack pointer in perf live regs savingsFrederic Weisbecker1-0/+5
In order to prepare for fetching the stack pointer from the regs when possible in dump_trace() instead of taking the local one, save the current stack pointer in perf live regs saving. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-07-01x86-32, NUMA: Fix boot regression caused by NUMA init unification on highmem machinesTejun Heo1-0/+2
During 32/64 NUMA init unification, commit 797390d855 ("x86-32, NUMA: use sparse_memory_present_with_active_regions()") made 32bit mm init call memory_present() automatically from active_regions instead of leaving it to each NUMA init path. This commit description is inaccurate - memory_present() calls aren't the same for flat and numaq. After the commit, memory_present() is only called for the intersection of e820 and NUMA layout. Before, on flatmem, memory_present() would be called from 0 to max_pfn. After, it would be called only on the areas that e820 indicates to be populated. This is how x86_64 works and should be okay as memmap is allowed to contain holes; however, x86_32 DISCONTIGMEM is missing early_pfn_valid(), which makes memmap_init_zone() assume that memmap doesn't contain any hole. This leads to the following oops if e820 map contains holes as it often does on machine with near or more 4GiB of memory by calling pfn_to_page() on a pfn which isn't mapped to a NUMA node, a reported by Conny Seidel: BUG: unable to handle kernel paging request at 000012b0 IP: [<c1aa13ce>] memmap_init_zone+0x6c/0xf2 *pdpt =3D 0000000000000000 *pde =3D f000eef3f000ee00 Oops: 0000 [#1] SMP last sysfs file: Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00164-g797390d #1 To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1 EIP: 0060:[<c1aa13ce>] EFLAGS: 00010012 CPU: 0 EIP is at memmap_init_zone+0x6c/0xf2 EAX: 00000000 EBX: 000a8000 ECX: 000a7fff EDX: f2c00b80 ESI: 000a8000 EDI: f2c00800 EBP: c19ffe54 ESP: c19ffe34 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=3Dc19fe000 task=3Dc1a07f60 task.ti=3Dc19fe000) Stack: 00000002 00000000 0023f000 00000000 10000000 00000a00 f2c00000 f2c00b58 c19ffeb0 c1a80f24 000375fe 00000000 f2c00800 00000800 00000100 00000030 c1abb768 0000003c 00000000 00000000 00000004 00207a02 f2c00800 000375fe Call Trace: [<c1a80f24>] free_area_init_node+0x358/0x385 [<c1a81384>] free_area_init_nodes+0x420/0x487 [<c1a79326>] paging_init+0x114/0x11b [<c1a6cb13>] setup_arch+0xb37/0xc0a [<c1a69554>] start_kernel+0x76/0x316 [<c1a690a8>] i386_start_kernel+0xa8/0xb0 This patch fixes the bug by defining early_pfn_valid() to be the same as pfn_valid() when DISCONTIGMEM. Reported-bisected-and-tested-by: Conny Seidel <conny.seidel@amd.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: hans.rosenfeld@amd.com Cc: Christoph Lameter <cl@linux.com> Cc: Conny Seidel <conny.seidel@amd.com> Link: http://lkml.kernel.org/r/20110628094107.GB3386@htj.dyndns.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-28watchdog: Intel SCU Watchdog: Fix build and remove duplicate codeJesper Juhl1-1/+1
Trying to build the Intel SCU Watchdog fails for me with gcc 4.6.0 - $ gcc --version | head -n 1 gcc (GCC) 4.6.0 20110513 (prerelease) like this : CC drivers/watchdog/intel_scu_watchdog.o In file included from drivers/watchdog/intel_scu_watchdog.c:49:0: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h: In function ‘apbt_time_init’: /home/jj/src/linux-2.6/arch/x86/include/asm/apb_timer.h:65:42: warning: ‘return’ with a value, in function returning void [enabled by default] drivers/watchdog/intel_scu_watchdog.c: In function ‘intel_scu_watchdog_init’: drivers/watchdog/intel_scu_watchdog.c:468:2: error: implicit declaration of function ‘sfi_get_mtmr’ [-Werror=implicit-function-declaration] drivers/watchdog/intel_scu_watchdog.c:468:32: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[1]: *** [drivers/watchdog/intel_scu_watchdog.o] Error 1 make: *** [drivers/watchdog/intel_scu_watchdog.o] Error 2 Additionally, linux/types.h is needlessly being included twice in drivers/watchdog/intel_scu_watchdog.c Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-06-27clocksource: apb: Share APB timer code with other platformsJamie Iles1-20/+2
The APB timers are an IP block from Synopsys (DesignWare APB timers) and are also found in other systems including ARM SoC's. This patch adds functions for creating clock_event_devices and clocksources from APB timers but does not do the resource allocation. This is handled in a higher layer to allow the timers to be created from multiple methods such as platform_devices. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-27Fix node_start/end_pfn() definition for mm/page_cgroup.cKAMEZAWA Hiroyuki2-14/+0
commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end of nodes. But, it's not defined in linux/mmzone.h but defined in /arch/???/include/mmzone.h which is included only under CONFIG_NEED_MULTIPLE_NODES=y. Then, we see mm/page_cgroup.c: In function 'page_cgroup_init': mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn' mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn' So, fixiing page_cgroup.c is an idea... But node_start_pfn()/node_end_pfn() is a very generic macro and should be implemented in the same manner for all archs. (m32r has different implementation...) This patch removes definitions of node_start/end_pfn() in each archs and defines a unified one in linux/mmzone.h. It's not under CONFIG_NEED_MULTIPLE_NODES, now. A result of macro expansion is here (mm/page_cgroup.c) for !NUMA start_pfn = ((&contig_page_data)->node_start_pfn); end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;}); for NUMA (x86-64) start_pfn = ((node_data[nid])->node_start_pfn); end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;}); Changelog: - fixed to avoid using "nid" twice in node_end_pfn() macro. Reported-and-acked-by: Randy Dunlap <randy.dunlap@oracle.com> Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-25x86: Add support for cmpxchg_doubleChristoph Lameter3-0/+95
A simple implementation that only supports the word size and does not have a fallback mode (would require a spinlock). Add 32 and 64 bit support for cmpxchg_double. cmpxchg double uses the cmpxchg8b or cmpxchg16b instruction on x86 processors to compare and swap 2 machine words. This allows lockless algorithms to move more context information through critical sections. Set a flag CONFIG_CMPXCHG_DOUBLE to signal that support for double word cmpxchg detection has been build into the kernel. Note that each subsystem using cmpxchg_double has to implement a fall back mechanism as long as we offer support for processors that do not implement cmpxchg_double. Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <cl@linux.com> Link: http://lkml.kernel.org/r/20110601172614.173427964@linux.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-06-21x86, UV: Correct UV2 BAU destination timeoutcpw@sgi.com1-5/+13
Correct the UV2 broacast assist unit's destination timeout period. And the activation status register in UV2 should be tested for a destination timeout with a 4, not a 2. The values for Active versus Timeout were reversed. This patch is critical for TLB shootdown on an Altix UV2 system (i.e. the follow-on to the current Altix UV). Destination timeout period: The period is set in 4 bits of memory-mapped register MISC_CONTROL. The left bit toggles base period between 10us and 80us. The other 3 bits are the multiplier. Decimal 15, hex f, gives the maximum: 7 * 80us Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20110621122243.117324443@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.