aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/cpu/scattered.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-10-14treewide: Fix common typo in "identify"Maxime Jayat1-1/+1
Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-14x86: delete __cpuinit usage from all x86 filesPaul Gortmaker1-2/+2
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-04-10cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governorJacob Shin1-1/+2
Future AMD processors, starting with Family 16h, can provide software with feedback on how the workload may respond to frequency change -- memory-bound workloads will not benefit from higher frequency, where as compute-bound workloads will. This patch enables this "frequency sensitivity feedback" to aid the ondemand governor to make better frequency change decisions by hooking into the powersave bias. Signed-off-by: Jacob Shin <jacob.shin@amd.com> Acked-by: Thomas Renninger <trenn@suse.de> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-06-25x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERMH. Peter Anvin1-1/+1
It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com Cc: Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> v2.6.36..v3.4 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-01-26X86: Introduce HW-Pstate scattered cpuid featureThomas Renninger1-0/+1
It is rather similar to CPB (boot capability) feature and exists since fam10h (can be looked up in AMD's BKDG). The feature is needed for powernow-k8 to cleanup init functions and to provide proper autoloading matching with the new x86cpu modalias feature. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Jones <davej@redhat.com> Cc: Borislav Petkov <bp@amd64.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21Merge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-0/+6
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd_nb: Enable GART support for AMD family 0x15 CPUs x86, amd: Use compute unit information to determine thread siblings x86, amd: Extract compute unit information for AMD CPUs x86, amd: Add support for CPUID topology extension of AMD CPUs x86, nmi: Support NMI watchdog on newer AMD CPU families x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs x86, k8: Rename k8.[ch] to amd_nb.[ch] and CONFIG_K8_NB to CONFIG_AMD_NB x86, k8-gart: Decouple handling of garts and northbridges x86, cacheinfo: Fix dependency of AMD L3 CID x86, kvm: add new AMD SVM feature bits x86, cpu: Fix allowed CPUID bits for KVM guests x86, cpu: Update AMD CPUID feature bits x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit x86, AMD: Remove needless CPU family check (for L3 cache info) x86, tsc: Remove CPU frequency calibration on AMD
2010-09-24x86/hwmon: fix initialization of coretempJan Beulich1-0/+1
Using cpuid_eax() to determine feature availability on other than the current CPU is invalid. And feature availability should also be checked in the hotplug code path. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-08x86, kvm: add new AMD SVM feature bitsAndre Przywara1-0/+6
The recently updated CPUID specification names new SVM feature bits. Add them to the list of reported features. Signed-off-by: Andre Przywara <andre.przywara@amd,com> LKML-Reference: <1283778860-26843-5-git-send-email-andre.przywara@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-30x86, cpu: Package Level Thermal Control, Power Limit Notification definitionsFenghua Yu1-0/+2
Add package level thermal and power limit feature support. The two MSRs and features are new starting with Intel's Sandy Bridge processor. Please check Intel 64 and IA-32 Architectures SDMV Vol 3A 14.5.6 Power Limit Notification and 14.6 Package Level Thermal Management. This patch also fixes a bug which defines reverse THERM_INT_LOW_ENABLE bit and THERM_INT_HIGH_ENABLE bit. [ hpa: fixed up against current tip:x86/cpu ] Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> LKML-Reference: <1280448826-12004-2-git-send-email-fenghua.yu@intel.com> Reviewed-by: Len Brown <len.brown@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-19x86, cpu: Split addon_cpuid_features.cH. Peter Anvin1-0/+61
addon_cpuid_features.c contains exactly two almost completely unrelated functions, plus has a long and very generic name. Split it into two files, scattered.c for the scattered feature flags, and topology.c for the topology information. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <tip-*@git.kernel.org>