aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/mm/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-02-18x86, pat: Migrate to rbtree only backend for pat memtype managementPallipadi, Venkatesh1-0/+1
Move pat backend to fully rbtree based implementation from the existing rbtree and linked list hybrid. New rbtree based solution uses interval trees (augmented rbtrees) in order to store the PAT ranges. The new code seprates out the pat backend to pat_rbtree.c file, making is cleaner. The change also makes the PAT lookup, reserve and free operations more optimal, as we don't have to traverse linear linked list of few tens of entries in normal case. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> LKML-Reference: <20100210232607.GB11465@linux-os.sc.intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-09-21x86: split NX setup into separate file to limit unstack-protected codeJeremy Fitzhardinge1-2/+2
Move the NX setup into a separate file so that it can be compiled without stack-protection while leaving the rest of the mm/init code protected. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-21xen: check EFER for NX before setting up GDT mappingJeremy Fitzhardinge1-0/+1
x86-64 assumes NX is available by default, so we need to explicitly check for it before using NX. Some first-generation Intel x86-64 processors didn't support NX, and even recent systems allow it to be disabled in BIOS. [ Impact: prevent Xen crash on NX-less 64-bit machines ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
2009-09-10x86: split __phys_addr out into separate fileJeremy Fitzhardinge1-2/+2
Split __phys_addr out into its own file so we can disable -fstack-protector in a fine-grained fashion. Also it doesn't have terribly much to do with the rest of ioremap.c. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-09-09xen: make -fstack-protector work under XenJeremy Fitzhardinge1-0/+4
-fstack-protector uses a special per-cpu "stack canary" value. gcc generates special code in each function to test the canary to make sure that the function's stack hasn't been overrun. On x86-64, this is simply an offset of %gs, which is the usual per-cpu base segment register, so setting it up simply requires loading %gs's base as normal. On i386, the stack protector segment is %gs (rather than the usual kernel percpu %fs segment register). This requires setting up the full kernel GDT and then loading %gs accordingly. We also need to make sure %gs is initialized when bringing up secondary cpus too. To keep things consistent, we do the full GDT/segment register setup on both architectures. Because we need to avoid -fstack-protected code before setting up the GDT and because there's no way to disable it on a per-function basis, several files need to have stack-protector inhibited. [ Impact: allow Xen booting with stack-protector enabled ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-06-13kmemcheck: add the kmemcheck coreVegard Nossum1-0/+2
General description: kmemcheck is a patch to the linux kernel that detects use of uninitialized memory. It does this by trapping every read and write to memory that was allocated dynamically (e.g. using kmalloc()). If a memory address is read that has not previously been written to, a message is printed to the kernel log. Thanks to Andi Kleen for the set_memory_4k() solution. Andrew Morton suggested documenting the shadow member of struct page. Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> [export kmemcheck_mark_initialized] [build fix for setup_max_cpus] Signed-off-by: Ingo Molnar <mingo@elte.hu> [rebased for mainline inclusion] Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
2009-03-13x86: unify 32 and 64-bit node_to_cpumask_mapRusty Russell1-1/+1
Impact: cleanup We take the 64-bit code and use it on 32-bit as well. The new file is called mm/numa.c. In a minor cleanup, we use cpu_none_mask instead of declaring a local cpu_mask_none. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-03x86: unify free_init_pages() and free_initmem()Pekka Enberg1-1/+1
Impact: unification This patch introduces a common arch/x86/mm/init.c and moves the identical free_init_pages() and free_initmem() functions to the file. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> LKML-Reference: <1236078906.2675.18.camel@penberg-laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: replace CONFIG_X86_SMP with CONFIG_SMPIngo Molnar1-1/+1
The x86/Voyager subarch used to have this distinction between 'x86 SMP support' and 'Voyager SMP support': config X86_SMP bool depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) This is a pointless distinction - Voyager can (and already does) use smp_ops to implement various SMP quirks it has - and it can be extended more to cover all the specialities of Voyager. So remove this complication in the Kconfig space. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21x86, mm: move tlb.c to arch/x86/mm/Ingo Molnar1-0/+2
Impact: cleanup Now that it's unified, move the (SMP) TLB flushing code from arch/x86/kernel/ to arch/x86/mm/, where it belongs logically. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-08Merge branches 'tracing/ftrace', 'tracing/fastboot', 'tracing/nmisafe' and 'tracing/urgent' into tracing/coreIngo Molnar1-1/+1
2008-10-31x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmapsKeith Packard1-1/+1
Impact: introduce new APIs, separate kmap code from CONFIG_HIGHMEM This takes the code used for CONFIG_HIGHMEM memory mappings except that it's designed for dynamic IO resource mapping. These fixmaps are available even with CONFIG_HIGHMEM turned off. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27trace: add the MMIO-tracer to the tracer menu, cleanupPekka Paalanen1-2/+1
Impact: cleanup We can remove MMIOTRACE_HOOKS and replace it with just MMIOTRACE. MMIOTRACE_HOOKS is a remnant from the time when I thought that something else could also use the kmmio facilities. Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-13x86: rename discontig_32.c to numa_32.cYinghai Lu1-5/+1
name it in line with its purpose. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12mm: Make generic weak get_user_pages_fast and EXPORT_GPL itRusty Russell1-2/+1
Out of line get_user_pages_fast fallback implementation, make it a weak symbol, get rid of CONFIG_HAVE_GET_USER_PAGES_FAST. Export the symbol to modules so lguest can use it. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-26x86: lockless get_user_pages_fast()Nick Piggin1-0/+1
Implement get_user_pages_fast without locking in the fastpath on x86. Do an optimistic lockless pagetable walk, without taking mmap_sem or any page table locks or even mmap_sem. Page table existence is guaranteed by turning interrupts off (combined with the fact that we're always looking up the current mm, means we can do the lockless page table walk within the constraints of the TLB shootdown design). Basically we can do this lockless pagetable walk in a similar manner to the way the CPU's pagetable walker does not have to take any locks to find present ptes. This patch (combined with the subsequent ones to convert direct IO to use it) was found to give about 10% performance improvement on a 2 socket 8 core Intel Xeon system running an OLTP workload on DB2 v9.5 "To test the effects of the patch, an OLTP workload was run on an IBM x3850 M2 server with 2 processors (quad-core Intel Xeon processors at 2.93 GHz) using IBM DB2 v9.5 running Linux 2.6.24rc7 kernel. Comparing runs with and without the patch resulted in an overall performance benefit of ~9.8%. Correspondingly, oprofiles showed that samples from __up_read and __down_read routines that is seen during thread contention for system resources was reduced from 2.8% down to .05%. Monitoring the /proc/vmstat output from the patched run showed that the counter for fast_gup contained a very high number while the fast_gup_slow value was zero." (fast_gup is the old name for get_user_pages_fast, fast_gup_slow is a counter we had for the number of times the slowpath was invoked). The main reason for the improvement is that DB2 has multiple threads each issuing direct-IO. Direct-IO uses get_user_pages, and thus the threads contend the mmap_sem cacheline, and can also contend on page table locks. I would anticipate larger performance gains on larger systems, however I think DB2 uses an adaptive mix of threads and processes, so it could be that thread contention remains pretty constant as machine size increases. In which case, we stuck with "only" a 10% gain. The downside of using get_user_pages_fast is that if there is not a pte with the correct permissions for the access, we end up falling back to get_user_pages and so the get_user_pages_fast is a bit of extra work. However this should not be the common case in most performance critical code. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: Kconfig fix] [akpm@linux-foundation.org: Makefile fix/cleanup] [akpm@linux-foundation.org: warning fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-18x86: seperate memtest from init_64.cYinghai Lu1-0/+1
it's separate functionality that deserves its own file. This also prepares 32-bit memtest support. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14Merge branch 'auto-ftrace-next' into tracing/for-linusIngo Molnar1-0/+5
Conflicts: arch/x86/kernel/entry_32.S arch/x86/kernel/process_32.c arch/x86/kernel/process_64.c arch/x86/lib/Makefile include/asm-x86/irqflags.h kernel/Makefile kernel/sched.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: remove acpi_srat config v2Yinghai Lu1-1/+2
use ACPI_NUMA directly and move srat_32.c to mm/ Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24x86 mmiotrace: move files into arch/x86/mm/.Pekka Paalanen1-0/+5
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24x86: add common mm/pgtable.cJeremy Fitzhardinge1-1/+1
Add a common arch/x86/mm/pgtable.c file for common pagetable functions. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86: PAT infrastructure patchvenkatesh.pallipadi@intel.com1-1/+2
Sets up pat_init() infrastructure. PAT MSR has following setting. PAT |PCD ||PWT ||| 000 WB _PAGE_CACHE_WB 001 WC _PAGE_CACHE_WC 010 UC- _PAGE_CACHE_UC_MINUS 011 UC _PAGE_CACHE_UC We are effectively changing WT from boot time setting to WC. UC_MINUS is used to provide backward compatibility to existing /dev/mem users(X). reserve_memtype and free_memtype are new interfaces for maintaining alias-free mapping. It is currently implemented in a simple way with a linked list and not optimized. reserve and free tracks the effective memory type, as a result of PAT and MTRR setting rather than what is actually requested in PAT. pat_init piggy backs on mtrr_init as the rules for setting both pat and mtrr are same. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: clean up the page table dumper and add 32-bit supportH. Peter Anvin1-1/+1
Clean up the page table dumper (fix boundary conditions, table driven address ranges, some formatting changes since it is no longer using the kernel log but a separate virtual file), and generalize to 32 bits. [ mingo@elte.hu: x86: fix the pagetable dumper ] Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86: add code to dump the (kernel) page tables for visual inspection by kernel developersArjan van de Ven1-0/+1
This patch adds code to the kernel to have an (optional) /proc/kernel_page_tables debug file that basically dumps the kernel pagetables; this allows us kernel developers to verify that nothing fishy is going on and that the various mappings are set up correctly. This was quite useful in finding various change_page_attr() bugs, and is very likely to be useful in the future as well. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: mingo@elte.hu Cc: tglx@tglx.de Cc: hpa@zytor.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86: unify arch/x86/mm/MakefileH. Peter Anvin1-2/+12
Unify arch/x86/mm/Makefile between 32 and 64 bits. All configuration variables that are protected by Kconfig constraints have been put in the common part of the Makefile; however, the NUMA files are totally different between 32 and 64 bits and are handled via an ifdef. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11x86_64: move mmThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11i386: move mmThomas Gleixner1-0/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>