aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/oprofile/nmi_int.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-22x86/oprofile/nmi: Convert to hotplug state machineSebastian Andrzej Siewior1-43/+18
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: oprofile-list@lists.sf.net Cc: rt@linuxtronix.de Link: http://lkml.kernel.org/r/20161117183541.8588-20-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-22x86/oprofile/nmi: Remove superfluous smp_function_call_single()Anna-Maria Gleixner1-10/+12
Since commit 1cf4f629d9d2 ("cpu/hotplug: Move online calls to hotplugged cpu") the CPU_ONLINE and CPU_DOWN_PREPARE notifiers are always run on the hot plugged CPU, and as of commit 3b9d6da67e11 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") the CPU_DOWN_FAILED notifier also runs on the hot plugged CPU. This patch converts the SMP functional calls into direct calls. smp_call_function_single() executes the function with interrupts disabled. This calling convention is preserved. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Robert Richter <rric@kernel.org> Cc: rt@linuxtronix.de Cc: oprofile-list@lists.sf.net Link: http://lkml.kernel.org/r/20161117183541.8588-19-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-13x86/cpufeature: Replace cpu_has_apic with boot_cpu_has() usageBorislav Petkov1-1/+1
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: iommu@lists.linux-foundation.org Cc: linux-pm@vger.kernel.org Cc: oprofile-list@lists.sf.net Link: http://lkml.kernel.org/r/1459801503-15600-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-31x86/cpufeature: Remove cpu_has_arch_perfmonBorislav Petkov1-2/+2
Use boot_cpu_has() instead. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Link: http://lkml.kernel.org/r/1459266123-21878-2-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-19x86/oprofile/nmi: Add missing hotplug FROZEN handlingThomas Gleixner1-1/+2
We really do not want to keep that nmi enabled across suspend/resume. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-08-26x86: Replace __get_cpu_var usesChristoph Lameter1-4/+4
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-20x86, oprofile, nmi: Fix CPU hotplug callback registrationSrivatsa S. Bhat1-2/+13
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the oprofile code in x86 by using this latter form of callback registration. But retain the calls to get/put_online_cpus(), since they are used in other places as well, to protect the variables 'nmi_enabled' and 'ctr_running'. Strictly speaking, this is not necessary since cpu_notifier_register_begin/done() provide a stronger synchronization with CPU hotplug than get/put_online_cpus(). However, let's retain the calls to get/put_online_cpus() to be consistent with the other call-sites. By nesting get/put_online_cpus() *inside* cpu_notifier_register_begin/done(), we avoid the ABBA deadlock possibility mentioned above. Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-03oprofilefs_create_...() do not need superblock argumentAl Viro1-7/+7
same story as with oprofilefs_mkdir() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-03oprofilefs_mkdir() doesn't need superblock argumentAl Viro1-1/+1
it's always equal to ->d_sb of the second argument (parent dentry), due to either being literally that, or ->d_sb of parent's parent. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-03oprofile: don't bother with passing superblock to ->create_files()Al Viro1-9/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-15oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()Dan Carpenter1-1/+1
The "event" variable is a u16 so the shift will always wrap to zero making the line a no-op. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> v2.6.32.. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-15Merge branch 'core' of git://amd64.org/linux/rric into perf/coreIngo Molnar1-6/+21
2011-11-08Merge branch 'perf/core' into oprofile/masterRobert Richter1-27/+11
Merge reason: Resolve conflicts with Don's NMI rework: commit 9c48f1c629ecfa114850c03f875c6691003214de Author: Don Zickus <dzickus@redhat.com> Date: Fri Sep 30 15:06:21 2011 -0400 x86, nmi: Wire up NMI handlers to new routines Conflicts: arch/x86/oprofile/nmi_timer_int.c Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-11-04oprofile, x86: Add kernel parameter oprofile.cpu_type=timerRobert Richter1-6/+21
We need this to better test x86 NMI timer mode. Otherwise it is very hard to setup systems with NMI timer enabled, but we have this e.g. in virtual machine environments. Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-10-26Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-29/+11
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-10perf, x86: Implement IBS initializationRobert Richter1-2/+0
This patch implements IBS feature detection and initialzation. The code is shared between perf and oprofile. If IBS is available on the system for perf, a pmu is setup. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1316597423-25723-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus1-27/+11
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-13locking, oprofile: Annotate oprofilefs lock as rawThomas Gleixner1-2/+2
The oprofilefs_lock can be taken in atomic context (in profiling interrupts) and therefore cannot cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-15oprofile, x86: Fix race in nmi handler while starting countersRobert Richter1-4/+10
In some rare cases, nmis are generated immediately after the nmi handler of the cpu was started. This causes the counter not to be enabled. Before enabling the nmi handlers we need to set variable ctr_running first and make sure its value is written to memory. Also, the patch makes all existing barriers a memory barrier instead of a compiler barrier only. Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: <stable@kernel.org> # .35+ Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-29Merge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgentIngo Molnar1-0/+5
2011-03-24oprofile, x86: Allow setting EDGE/INV/CMASK for counter eventsAndi Kleen1-0/+5
For some performance events it's useful to set the EDGE and INV bits and the CMASK mask in the counter control register. The list of predefined events Intel releases for each CPU has some events which require these settings to get more "natural" to use higher level events. oprofile currently doesn't allow this. This patch adds new extra configuration fields for them, so that they can be specified in oprofilefs. An updated oprofile daemon can then make use of this to set them. v2: Write back masked extra value to variable. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-03-23x86: Use syscore_ops instead of sysdev classes and sysdevsRafael J. Wysocki1-32/+12
Some subsystems in the x86 tree need to carry out suspend/resume and shutdown operations with one CPU on-line and interrupts disabled and they define sysdev classes and sysdevs or sysdev drivers for this purpose. This leads to unnecessarily complicated code and excessive memory usage, so switch them to using struct syscore_ops objects for this purpose instead. Generally, there are three categories of subsystems that use sysdevs for implementing PM operations: (1) subsystems whose suspend/resume callbacks ignore their arguments entirely (the majority), (2) subsystems whose suspend/resume callbacks use their struct sys_device argument, but don't really need to do that, because they can be implemented differently in an arguably simpler way (io_apic.c), and (3) subsystems whose suspend/resume callbacks use their struct sys_device argument, but the value of that argument is always the same and could be ignored (microcode_core.c). In all of these cases the subsystems in question may be readily converted to using struct syscore_ops objects for power management and shutdown. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2011-01-11Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-2/+1
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds1-1/+1
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits) gameport: use this_cpu_read instead of lookup x86: udelay: Use this_cpu_read to avoid address calculation x86: Use this_cpu_inc_return for nmi counter x86: Replace uses of current_cpu_data with this_cpu ops x86: Use this_cpu_ops to optimize code vmstat: User per cpu atomics to avoid interrupt disable / enable irq_work: Use per cpu atomics instead of regular atomics cpuops: Use cmpxchg for xchg to avoid lock semantics x86: this_cpu_cmpxchg and this_cpu_xchg operations percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support percpu,x86: relocate this_cpu_add_return() and friends connector: Use this_cpu operations xen: Use this_cpu_inc_return taskstats: Use this_cpu_ops random: Use this_cpu_inc_return fs: Use this_cpu_inc_return in buffer.c highmem: Use this_cpu_xx_return() operations vmstat: Use this_cpu_inc_return for vm statistics x86: Support for this_cpu_add, sub, dec, inc_return percpu: Generic support for this_cpu_add, sub, dec, inc_return ... Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c} as per Tejun.
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus1-1/+0
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add priorities to handlersDon Zickus1-1/+1
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-30x86: Use this_cpu_ops to optimize codeTejun Heo1-1/+1
Go through x86 code and replace __get_cpu_var and get_cpu_var instances that refer to a scalar and are not used for address determinations. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-19oprofile, x86: Add support for AMD family 15hRobert Richter1-0/+3
This patch adds support for AMD family 15h (Interlagos/Valencia/ Zambezi) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Add support for AMD family 14hRobert Richter1-0/+3
This patch adds support for AMD family 14h (Ontario/Zacate) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15oprofile, x86: Add support for AMD family 12hRobert Richter1-0/+3
This patch adds support for AMD family 12h (Llano) cpus. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01oprofile, x86: Simplify init/exit functionsRobert Richter1-8/+1
Now, that we only call the exit function if init succeeds with commit: 979048e oprofile: don't call arch exit code from init code on failure we can simplify the x86 init/exit functions too. Variable using_nmi becomes obsolete. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-21oprofile: Add Support for Intel CPU Family 6 / Model 29Jiri Olsa1-0/+1
This patch adds CPU type detection for dunnington processor (Family 6 / Model 29) to be identified as core 2 family cpu type (wikipedia source). I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as model 29, and it runs without an issue. Spec: http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-16oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)Patrick Simmons1-1/+3
This patch adds CPU type detection for the Intel Celeron 540, which is part of the Core 2 family according to Wikipedia; the family and ID pair is absent from the Volume 3B table referenced in the source code comments. I have tested this patch on an Intel Celeron 540 machine reporting itself as Family 6 Model 22, and OProfile runs on the machine without issue. Spec: http://download.intel.com/design/mobile/SPECUPDT/317667.pdf Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-01oprofile, x86: fix init_sysfs() function stubRobert Richter1-2/+4
The use of the return value of init_sysfs() with commit 10f0412 oprofile, x86: fix init_sysfs error handling discovered the following build error for !CONFIG_PM: .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’: .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’ make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1 make[1]: *** [arch/x86/oprofile] Error 2 This patch fixes this. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31oprofile, x86: fix init_sysfs error handlingRobert Richter1-3/+13
On failure init_sysfs() might not properly free resources. The error code of the function is not checked. And, when reinitializing the exit function might be called twice. This patch fixes all this. Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-05oprofile: add support for Intel processor model 30Josh Hunt1-0/+1
Newer Intel processors identifying themselves as model 30 are not recognized by oprofile. <cpuinfo snippet> model : 30 model name : Intel(R) Xeon(R) CPU X3470 @ 2.93GHz </cpuinfo snippet> Running oprofile on these machines gives the following: + opcontrol --init + opcontrol --list-events oprofile: available events for CPU type "Intel Architectural Perfmon" See Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3B (Document 253669) Chapter 18 for architectural perfmon events This is a limited set of fallback events because oprofile doesn't know your CPU CPU_CLK_UNHALTED: (counter: all) Clock cycles when not halted (min count: 6000) INST_RETIRED: (counter: all) number of instructions retired (min count: 6000) LLC_MISSES: (counter: all) Last level cache demand requests from this core that missed the LLC (min count: 6000) Unit masks (default 0x41) ---------- 0x41: No unit mask LLC_REFS: (counter: all) Last level cache demand requests from this core (min count: 6000) Unit masks (default 0x4f) ---------- 0x4f: No unit mask BR_MISS_PRED_RETIRED: (counter: all) number of mispredicted branches retired (precise) (min count: 500) + opcontrol --shutdown Tested using oprofile 0.9.6. Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-10Oprofile: Change CPUIDS from decimal to hex, and add some commentsJohn Villalovos1-2/+14
Back when the patch was submitted for "Add Xeon 7500 series support to oprofile", Robert Richter had asked for a followon patch that converted all the CPU ID values to hex. I have done that here for the "i386/core_i7" and "i386/atom" class processors in the ppro_init() function and also added some comments on where to find documentation on the Intel processors. Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-06oprofile/x86: make AMD IBS hotplug capableRobert Richter1-2/+2
Current IBS code is not hotplug capable. An offline cpu might not be initialized or deinitialized properly. This patch fixes this by removing on_each_cpu() functions. The IBS init/deinit code is executed in the per-cpu functions model->setup_ctrs() and model->cpu_down() which are also called by hotplug notifiers. model->cpu_down() replaces model->exit() that became obsolete. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-06oprofile/x86: notify cpus only when daemon is runningRobert Richter1-13/+3
This patch moves the cpu notifier registration from nmi_init() to nmi_setup(). The corresponding unregistration function is now in nmi_shutdown(). Thus, the hotplug code is only active, if the oprofile daemon is running. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: reordering some functionsRobert Richter1-67/+67
Reordering some functions. Necessary for the next patch. No functional changes. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: stop disabled counters in nmi handlerRobert Richter1-2/+10
This patch adds checks to the nmi handler. Now samples are only generated and counters reenabled, if the counters are running. Otherwise the counters are stopped, if oprofile is using the nmi. In other cases it will ignore the nmi notification. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: protect cpu hotplug sectionsRobert Richter1-6/+46
This patch reworks oprofile cpu hotplug code as follows: Introduce ctr_running variable to check, if counters are running or not. The state must be known for taking a cpu on or offline and when switching counters during counter multiplexing. Protect on_each_cpu() sections with get_online_cpus()/put_online_cpu() functions. This is necessary if notifiers or states are modified. Within these sections the cpu mask may not change. Switch only between counters in nmi_cpu_switch(), if counters are running. Otherwise the switch may restart a counter though they are disabled. Add nmi_cpu_setup() and nmi_cpu_shutdown() to cpu hotplug code. The function must also be called to avoid uninitialzed counter usage. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: remove CONFIG_SMP macrosRobert Richter1-6/+1
CPU notifier register functions also exist if CONFIG_SMP is disabled. This change is part of hotplug code rework and also necessary for later patches. Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: fix uninitialized counter usage during cpu hotplugRobert Richter1-2/+8
This fixes a NULL pointer dereference that is triggered when taking a cpu offline after oprofile was initialized, e.g.: $ opcontrol --init $ opcontrol --start-daemon $ opcontrol --shutdown $ opcontrol --deinit $ echo 0 > /sys/devices/system/cpu/cpu1/online See the crash dump below. Though the counter has been disabled the cpu notifier is still active and trying to use already freed counter data. This fix is for linux-stable. To proper fix this, the hotplug code must be rewritten. Thus I will leave a WARN_ON_ONCE() message with this patch. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e PGD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/online CPU 1 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16 Anaheim/Anaheim RIP: 0010:[<ffffffff8132ad57>] [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e RSP: 0018:ffff880001843f28 EFLAGS: 00010006 RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000200200 RDX: ffff880001843f68 RSI: dead000000100100 RDI: 0000000000000000 RBP: ffff880001843f48 R08: 0000000000000000 R09: ffff880001843f08 R10: ffffffff8102c9a5 R11: ffff88000184ea80 R12: 0000000000000000 R13: ffff88000184f6c0 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fec6a92e6f0(0000) GS:ffff880001840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 000000000163b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88042fcd8000, task ffff88042fcd51d0) Stack: ffff880001843f48 0000000000000001 ffff88042e9f7d38 ffff880001843f68 <0> ffff880001843f58 ffffffff8132a602 ffff880001843f98 ffffffff810521b3 <0> ffff880001843f68 ffff880001843f68 ffff880001843f88 ffff88042fcd9fd8 Call Trace: <IRQ> [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12 [<ffffffff81008701>] ? default_idle+0x22/0x37 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2 Code: 89 e5 41 55 49 89 fd 41 54 45 31 e4 53 31 db 48 83 ec 08 89 df e8 be f8 ff ff 48 98 48 83 3c c5 10 67 7a 81 00 74 1f 49 8b 45 08 <42> 8b 0c 20 0f 32 48 c1 e2 20 25 ff ff bf ff 48 09 d0 48 89 c2 RIP [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e RSP <ffff880001843f28> CR2: 0000000000000000 ---[ end trace 679ac372d674b757 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 0, comm: swapper Tainted: G D 2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16 Call Trace: <IRQ> [<ffffffff813ebd6a>] panic+0x9e/0x10c [<ffffffff810474b0>] ? up+0x34/0x39 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c [<ffffffff813eeff1>] oops_end+0x81/0x8e [<ffffffff8101efee>] no_context+0x1f3/0x202 [<ffffffff8101f1b7>] __bad_area_nosemaphore+0x1ba/0x1e0 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a [<ffffffff810264dc>] ? activate_task+0x42/0x53 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284 [<ffffffff8101f1eb>] bad_area_nosemaphore+0xe/0x10 [<ffffffff813f0f3f>] do_page_fault+0x1c8/0x37c [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a [<ffffffff813ee55f>] page_fault+0x1f/0x30 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12 [<ffffffff81008701>] ? default_idle+0x22/0x37 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2 ------------[ cut here ]------------ WARNING: at /local/rrichter/.source/linux/arch/x86/kernel/smp.c:118 native_smp_send_reschedule+0x27/0x53() Hardware name: Anaheim Modules linked in: Pid: 0, comm: swapper Tainted: G D 2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16 Call Trace: <IRQ> [<ffffffff81017f32>] ? native_smp_send_reschedule+0x27/0x53 [<ffffffff81030ee2>] warn_slowpath_common+0x77/0xa4 [<ffffffff81030f1e>] warn_slowpath_null+0xf/0x11 [<ffffffff81017f32>] native_smp_send_reschedule+0x27/0x53 [<ffffffff8102634b>] resched_task+0x60/0x62 [<ffffffff8102653a>] check_preempt_curr_idle+0x10/0x12 [<ffffffff8102c8ea>] try_to_wake_up+0x1f5/0x284 [<ffffffff8102c986>] default_wake_function+0xd/0xf [<ffffffff810a110d>] pollwake+0x57/0x5a [<ffffffff8102c979>] ? default_wake_function+0x0/0xf [<ffffffff81026be5>] __wake_up_common+0x46/0x75 [<ffffffff81026ed0>] __wake_up+0x38/0x50 [<ffffffff81031694>] printk_tick+0x39/0x3b [<ffffffff8103ac37>] update_process_times+0x3f/0x5c [<ffffffff8104dc63>] tick_periodic+0x5d/0x69 [<ffffffff8104dc90>] tick_handle_periodic+0x21/0x71 [<ffffffff81018fd0>] smp_apic_timer_interrupt+0x82/0x95 [<ffffffff81002853>] apic_timer_interrupt+0x13/0x20 [<ffffffff81030cb5>] ? panic_blink_one_second+0x0/0x7b [<ffffffff813ebdd6>] ? panic+0x10a/0x10c [<ffffffff810474b0>] ? up+0x34/0x39 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c [<ffffffff813eeff1>] ? oops_end+0x81/0x8e [<ffffffff8101efee>] ? no_context+0x1f3/0x202 [<ffffffff8101f1b7>] ? __bad_area_nosemaphore+0x1ba/0x1e0 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a [<ffffffff810264dc>] ? activate_task+0x42/0x53 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284 [<ffffffff8101f1eb>] ? bad_area_nosemaphore+0xe/0x10 [<ffffffff813f0f3f>] ? do_page_fault+0x1c8/0x37c [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a [<ffffffff813ee55f>] ? page_fault+0x1f/0x30 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e [<ffffffff8132a602>] ? nmi_cpu_stop+0x21/0x23 [<ffffffff810521b3>] ? generic_smp_call_function_single_interrupt+0xdf/0x11b [<ffffffff8101804f>] ? smp_call_function_single_interrupt+0x22/0x31 [<ffffffff810029f3>] ? call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12 [<ffffffff81008701>] ? default_idle+0x22/0x37 [<ffffffff8100896d>] ? c1e_idle+0xdf/0xe6 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15 [<ffffffff810012fb>] ? cpu_idle+0x4b/0x7e [<ffffffff813e8a4e>] ? start_secondary+0x1ae/0x1b2 ---[ end trace 679ac372d674b758 ]--- Cc: Andi Kleen <andi@firstfloor.org> Cc: stable <stable@kernel.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: return -EBUSY if counters are already reservedRobert Richter1-1/+4
In case a counter is already reserved by the watchdog or perf_event subsystem, oprofile ignored this counters silently. This case is handled now and oprofile_setup() now reports an error. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04oprofile/x86: rework error handler in nmi_setup()Robert Richter1-14/+19
This patch improves the error handler in nmi_setup(). Most parts of the code are moved to allocate_msrs(). In case of an error allocate_msrs() also frees already allocated memory. nmi_setup() becomes easier and better extendable. Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26oprofile/x86: use kzalloc() instead of kmalloc()Robert Richter1-3/+3
Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26oprofile/x86: fix perfctr nmi reservation for mulitplexingRobert Richter1-5/+6
Multiple virtual counters share one physical counter. The reservation of virtual counters fails due to duplicate allocation of the same counter. The counters are already reserved. Thus, virtual counter reservation may removed at all. This also makes the code easier. Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-01-25oprofile/x86: add Xeon 7500 series supportAndi Kleen1-0/+1
Add Xeon 7500 series support to oprofile. Straight forward: it's the same as Core i7, so just detect the model number. No user space changes needed. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-01-25oprofile/x86: fix crash when profiling more than 28 eventsSuravee Suthikulpanit1-1/+1
With multiplexing enabled oprofile crashs when profiling more than 28 events. This patch fixes this. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.