aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/pci/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-27x86, platforms: Remove NUMAQH. Peter Anvin1-1/+0
The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
2014-02-27x86, platforms: Remove SGI Visual WorkstationH. Peter Anvin1-2/+0
The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-17intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-1/+1
Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-07x86/PCI: Add NumaChip remote PCI supportDaniel J Blueman1-0/+1
Add NumaChip-specific PCI access mechanism via MMCONFIG cycles, but preventing access to AMD Northbridges which shouldn't respond. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-12x86, platform: Initial support for sta2x11 I/O hubAlessandro Rubini1-0/+2
The "ConneXt" sta2x11 I/O Hub is a bridge from PCIe to AMBA, and is used as main chipset in some Atom boards. The set of peripherals it exports live in an AMBA bus internal to the chip, so a custom remapping of addresses is needed. This is implemented by fixup calls for the PCI deivices, based on CONFIG_X86_DEV_DMA_OPS and CONFIG_X86_DMA_REMAP . Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Link: http://lkml.kernel.org/r/ddca670ca8180e52d49b3fe642742ddd23ab2cb2.1333560789.git.rubini@gnudd.com Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-01-12x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=yBjorn Helgaas1-1/+2
We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-18x86/intel config: Revamp configuration to allow for Moorestown and MedfieldAlan Cox1-1/+1
This sets all up the other bits that need to be INTEL_MID specific rather than Moorestown specific. Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/20111217174318.7207.91543.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-12ce4100: Add PCI register emulation for CE4100Dirk Brandewie1-0/+1
This patch provides access methods for PCI registers that mis-behave on the CE4100. Each register can be assigned a private init, read and write routine. The exception to this is the bridge device. The bridge device is the only device on bus zero (0) that requires any fixup so it is a special case. [ tglx: minor coding style cleanups, __init annotation and simplification of ce4100_conf_read/write ] Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-18xen/x86/PCI: Add support for the Xen PCI subsystemAlex Nixon1-0/+1
The frontend stub lives in arch/x86/pci/xen.c, alongside other sub-arch PCI init code (e.g. olpc.c). It provides a mechanism for Xen PCI frontend to setup/destroy legacy interrupts, MSI/MSI-X, and PCI configuration operations. [ Impact: add core of Xen PCI support ] [ v2: Removed the IOMMU code and only focusing on PCI.] [ v3: removed usage of pci_scan_all_fns as that does not exist] [ v4: introduced pci_xen value to fix compile warnings] [ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs] [ v7: added Acked-by] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Qing He <qing.he@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org
2010-05-21PCI: read memory ranges out of Broadcom CNB20LE host bridgeIra W. Snyder1-0/+2
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-07Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds1-0/+2
* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-02-25x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=nYinghai Lu1-1/+3
If we don't have any Moorestown CPU support compiled in, we don't need the Moorestown PCI support either. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B858E89.7040807@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-23x86/PCI: Moorestown PCI supportJesse Barnes1-1/+1
The Moorestown platform only has a few devices that actually support PCI config cycles. The rest of the devices use an in-RAM MCFG space for the purposes of device enumeration and initialization. There are a few uglies in the fake support, like BAR sizes that aren't a power of two, sizing detection, and writes to the real devices, but other than that it's pretty straightforward. Another way to think of this is not really as PCI at all, but just a table in RAM describing which devices are present, their capabilities and their offsets in MMIO space. This could have been done with a special new firmware table on this platform, but given that we do have some real PCI devices too, simply describing things in an MCFG type space was pretty simple. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D08@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-10x86/pci: Enable pci root res read out for 32bit tooYinghai Lu1-2/+1
Should be good for 32bit too. -v3: cast res->start -v4: according to Linus, to use %pR instead of cast Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-9-git-send-email-yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-28x86/PCI: remove IOH range fetchingJeff Garrett1-1/+1
Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24x86/pci: seperate x86_pci_rootbus_res_quirks from amd_bus.cYinghai Lu1-1/+1
Those functions are used by intel_bus.c so seperate them to another file. and make amd_bus a bit smaller. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04x86/PCI: use -DDEBUG when CONFIG_PCI_DEBUG setBjorn Helgaas1-0/+4
We use dev_dbg() in arch/x86/pci, but there's no easy way to turn it on. Add -DDEBUG when CONFIG_PCI_DEBUG=y, just like we do in drivers/pci. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04x86/PCI: read root resources from IOH on IntelYinghai Lu1-0/+1
For intel systems with multi IOH, we should read peer root resources directly from PCI config space, and don't trust _CRS. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-11x86/pci: renamed: numa.c -> numaq_32.cRobert Richter1-1/+1
Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86/pci: Removing pci-y in MakefileRobert Richter1-6/+6
Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, remove leftover filesIngo Molnar1-2/+0
remove leftover arch/x86/mach-visws/* files. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, add early init quirksIngo Molnar1-1/+1
add early init quirks for VisWS. This gradually turns the VISWS subarch into a generic PC architecture. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10x86, VisWS: turn into generic arch, make VisWS boot on a regular PCIngo Molnar1-1/+1
first step: make the VISWS subarch boot on a regular PC. We take various shortcuts for that. We copy the generic arch setup file over into the VISWS setup file. This is the only step that is not expected to boot on a real VISWS. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: removing subsys_initcall ordering dependenciesRobert Richter1-4/+0
So far subsys_initcalls has been executed in this order depending on the object order in the Makefile: arch/x86/pci/visws.c:subsys_initcall(pcibios_init); arch/x86/pci/numa.c:subsys_initcall(pci_numa_init); arch/x86/pci/acpi.c:subsys_initcall(pci_acpi_init); arch/x86/pci/legacy.c:subsys_initcall(pci_legacy_init); arch/x86/pci/irq.c:subsys_initcall(pcibios_irq_init); arch/x86/pci/common.c:subsys_initcall(pcibios_init); This patch removes the ordering dependency. There is now only one subsys_initcall function that contains subsystem initialization code with a defined order. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: coalescing 32 and 64 bitRobert Richter1-20/+1
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: merge: moving mp_bus_to_node.c to amd_bus.cRobert Richter1-1/+0
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: creating pci-y for 64 bitRobert Richter1-4/+4
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: changing 64bit orderingRobert Richter1-6/+5
This should be safe since mmconfig*.o and init.o do not contain *initcalls with the same level as in other files. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: decoupling options for mp_bus_to_node.oRobert Richter1-3/+1
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: whitespace changes onlyRobert Richter1-7/+7
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: removing include dir flagRobert Richter1-3/+0
Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86/pci: Makefile merge: Removing Makefile_*Robert Richter1-2/+46
No functional nor ordering changes here. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11x86_64: move pciThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11i386: move pciThomas Gleixner1-0/+5
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.