aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/pci (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-31Merge tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-38/+10
Pull PCI updates from Bjorn Helgaas: "Resource management: - Improve resource assignment for hot-added nested bridges, e.g., Thunderbolt (Nicholas Johnson) Power management: - Optionally print config space of devices before suspend (Chen Yu) - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake) Virtualization: - Generalize DMA alias quirks (James Sewart) - Add DMA alias quirk for PLX PEX NTB (James Sewart) - Fix IOV memory leak (Navid Emamdoost) AER: - Log which device prevents error recovery (Yicong Yang) Peer-to-peer DMA: - Whitelist Intel SkyLake-E (Armen Baloyan) Broadcom iProc host bridge driver: - Apply PAXC quirk whether driver is built-in or module (Wei Liu) Broadcom STB host bridge driver: - Add Broadcom STB PCIe host controller driver (Jim Quinlan) Intel Gateway SoC host bridge driver: - Add driver for Intel Gateway SoC (Dilip Kota) Intel VMD host bridge driver: - Add support for DMA aliases on other buses (Jon Derrick) - Remove dma_map_ops overrides (Jon Derrick) - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig) NVIDIA Tegra host bridge driver: - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler) Panasonic UniPhier host bridge driver: - Remove module code since driver can't be built as a module (Masahiro Yamada) Qualcomm host bridge driver: - Add support for SDM845 PCIe controller (Bjorn Andersson) TI Keystone host bridge driver: - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I) - Fix link training retries initiation (Yurii Monakov) - Fix outbound region mapping (Yurii Monakov) Misc: - Add Switchtec Gen4 support (Kelvin Cao) - Add Switchtec Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit addressing (Wesley Sheng)" * tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits) PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: vmd: Add two VMD Device IDs PCI: Remove unnecessary braces PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper PCI/AER: Initialize aer_fifo ...
2020-01-28Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+1
Pull EFI updates from Ingo Molnar: "The main changes in this cycle were: - Cleanup of the GOP [graphics output] handling code in the EFI stub - Complete refactoring of the mixed mode handling in the x86 EFI stub - Overhaul of the x86 EFI boot/runtime code - Increase robustness for mixed mode code - Add the ability to disable DMA at the root port level in the EFI stub - Get rid of RWX mappings in the EFI memory map and page tables, where possible - Move the support code for the old EFI memory mapping style into its only user, the SGI UV1+ support code. - plus misc fixes, updates, smaller cleanups. ... and due to interactions with the RWX changes, another round of PAT cleanups make a guest appearance via the EFI tree - with no side effects intended" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits) efi/x86: Disable instrumentation in the EFI runtime handling code efi/libstub/x86: Fix EFI server boot failure efi/x86: Disallow efi=old_map in mixed mode x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping efi: Fix handling of multiple efi_fake_mem= entries efi: Fix efi_memmap_alloc() leaks efi: Add tracking for dynamically allocated memmaps efi: Add a flags parameter to efi_memory_map efi: Fix comment for efi_mem_type() wrt absent physical addresses efi/arm: Defer probe of PCIe backed efifb on DT systems efi/x86: Limit EFI old memory map to SGI UV machines efi/x86: Avoid RWX mappings for all of DRAM efi/x86: Don't map the entire kernel text RW for mixed mode x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd efi/libstub/x86: Fix unused-variable warning efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode efi/libstub/x86: Use const attribute for efi_is_64bit() efi: Allow disabling PCI busmastering on bridges during boot efi/x86: Allow translating 64-bit arguments for mixed mode calls ...
2020-01-24x86/PCI: Remove X86_DEV_DMA_OPSChristoph Hellwig1-38/+0
There are no users of X86_DEV_DMA_OPS left, so remove the code. Link: https://lore.kernel.org/r/1579613871-301529-8-git-send-email-jonathan.derrick@intel.com Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2020-01-24PCI: Introduce pci_real_dma_dev()Jon Derrick1-0/+10
The current DMA alias implementation requires the aliased device be on the same PCI bus as the requester ID. Add an arch-specific mechanism to point to another PCI device when doing mapping and PCI DMA alias search. The default case returns the actual device. Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-10x86/mm/pat: Rename <asm/pat.h> => <asm/memtype.h>Ingo Molnar1-1/+1
pat.h is a file whose main purpose is to provide the memtype_*() APIs. PAT is the low level hardware mechanism - but the high level abstraction is memtype. So name the header <memtype.h> as well - this goes hand in hand with memtype.c and memtype_interval.c. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-03Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds5-9/+15
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas2-2/+2
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-21dma-mapping: treat dev->bus_dma_mask as a DMA limitNicolas Saenz Julienne1-1/+1
Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-11-21x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defectKai-Heng Feng1-0/+11
The AMD FCH USB XHCI Controller advertises support for generating PME# while in D0. When in D0, it does signal PME# for USB 3.0 connect events, but not for USB 2.0 or USB 1.1 connect events, which means the controller doesn't wake correctly for those events. 00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7914] (rev 20) (prog-if 30 [XHCI]) Subsystem: Dell FCH USB XHCI Controller [1028:087e] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Clear PCI_PM_CAP_PME_D0 in dev->pme_support to indicate the device will not assert PME# from D0 so we don't rely on it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203673 Link: https://lore.kernel.org/r/20190902145252.32111-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2019-11-21x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-yKrzysztof Wilczynski1-3/+1
Update arch/x86/pci/Makefile replacing the deprecated EXTRA_CFLAGS with the ccflags-y matching recommendation per section 3.7 of Documentation/kbuild/makefiles.txt. Link: https://lore.kernel.org/r/20190819060532.17093-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplateKrzysztof Wilczynski1-4/+1
Add SPDX GPL-2.0 to numachip.c, which referred to the kernel default "COPYING" file, which specifies GPL version 2. Remove the boilerplate language referring to the GPL and "COPYING", relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20190828135322.10370-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-11x86/PCI: sta2x11: use default DMA address translationNicolas Saenz Julienne1-109/+26
The devices found behind this PCIe chip have unusual DMA mapping constraints as there is an AMBA interconnect placed in between them and the different PCI endpoints. The offset between physical memory addresses and AMBA's view is provided by reading a PCI config register, which is saved and used whenever DMA mapping is needed. It turns out that this DMA setup can be represented by properly setting 'dma_pfn_offset', 'dma_bus_mask' and 'dma_mask' during the PCI device enable fixup. And ultimately allows us to get rid of this device's custom DMA functions. Aside from the code deletion and DMA setup, sta2x11_pdev_to_mapping() is moved to avoid warnings whenever CONFIG_PM is not enabled. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov2-2/+2
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-3/+1
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-03dma-mapping: fix filename referencesAndy Shevchenko1-3/+1
After commit cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma") some of the files are referring to outdated information, i.e. old file names of DMA mapping sources. Fix it here. Note, the lines with "Glue code for..." have been removed completely. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-13x86/pci: Pass lockdep condition to pcm_mmcfg_list iteratorJoel Fernandes (Google)1-2/+3
The pcm_mmcfg_list is traversed by list_for_each_entry_rcu() outside of an RCU read-side critical section, which is safe because the pci_mmcfg_lock is held. This commit therefore adds a lockdep expression to list_for_each_entry_rcu() in order t avoid lockdep warnings. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 387Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): this code is released under the gnu general public license version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081037.657778837@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 334Thomas Gleixner1-17/+1
Based on 1 normalized pattern(s): gpl license summary [copyright] [c] [2010] [intel] [corporation] [all] [rights] [reserved] this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa the full gnu general public license is included in this distribution in the file called license gpl extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.477146092@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2-10/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner3-0/+3
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17x86/PCI: Fix PCI IRQ routing table memory leakWenwen Wang1-2/+8
In pcibios_irq_init(), the PCI IRQ routing table 'pirq_table' is first found through pirq_find_routing_table(). If the table is not found and CONFIG_PCI_BIOS is defined, the table is then allocated in pcibios_get_irq_routing_table() using kmalloc(). Later, if the I/O APIC is used, this table is actually not used. In that case, the allocated table is not freed, which is a memory leak. Free the allocated table if it is not used. Signed-off-by: Wenwen Wang <wang6495@umn.edu> [bhelgaas: added Ingo's reviewed-by, since the only change since v1 was to use the irq_routing_table local variable name he suggested] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2019-02-07x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace HubAlexander Shishkin1-0/+16
On Denverton's integration of the Intel(R) Trace Hub (for a reference and overview see Documentation/trace/intel_th.rst) the reported size of one of its resources (RTIT_BAR) doesn't match its actual size, which leads to overlaps with other devices' resources. In practice, it overlaps with XHCI MMIO space, which results in the xhci driver bailing out after seeing its registers as 0xffffffff, and perceived disappearance of all USB devices: intel_th_pci 0000:00:1f.7: enabling device (0004 -> 0006) xhci_hcd 0000:00:15.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:15.0: xHC not responding in xhci_irq, assume controller is dead xhci_hcd 0000:00:15.0: HC died; cleaning up usb 1-1: USB disconnect, device number 2 For this reason, we need to resize the RTIT_BAR on Denverton to its actual size, which in this case is 4MB. The corresponding erratum is DNV36 at the link below: DNV36. Processor Host Root Complex May Incorrectly Route Memory Accesses to Intel® Trace Hub Problem: The Intel® Trace Hub RTIT_BAR (B0:D31:F7 offset 20h) is reported as a 2KB memory range. Due to this erratum, the processor Host Root Complex will forward addresses from RTIT_BAR to RTIT_BAR + 4MB -1 to Intel® Trace Hub. Implication: Devices assigned within the RTIT_BAR to RTIT_BAR + 4MB -1 space may not function correctly. Workaround: A BIOS code change has been identified and may be implemented as a workaround for this erratum. Status: No Fix. Note that 5118ccd34780 ("intel_th: pci: Add Denverton SOC support") updates the Trace Hub driver so it claims the Denverton device, but the resource overlap exists regardless of whether that driver is loaded or that commit is included. Link: https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-c3000-family-spec-update.pdf Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> [bhelgaas: include erratum text, clarify relationship with 5118ccd34780] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2019-01-05Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-2/+2
Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2018-12-28Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+0
Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...
2018-12-13dma-direct: merge swiotlb_dma_ops into the dma_direct codeChristoph Hellwig1-1/+0
While the dma-direct code is (relatively) clean and simple we actually have to use the swiotlb ops for the mapping on many architectures due to devices with addressing limits. Instead of keeping two implementations around this commit allows the dma-direct implementation to call the swiotlb bounce buffering functions and thus share the guts of the mapping implementation. This also simplified the dma-mapping setup on a few architectures where we don't have to differenciate which implementation to use. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-11-08x86/PCI: Replace spin_is_locked() with lockdepLance Roy1-1/+1
lockdep_assert_held() is better suited to checking locking requirements, since it only checks if the current thread holds the lock regardless of whether someone else does. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: <linux-pci@vger.kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-08x86/PCI: Fix Broadcom CNB20LE unintended sign extension (redux)Colin Ian King1-2/+2
In the expression "word1 << 16", word1 starts as u16, but is promoted to a signed int, then sign-extended to resource_size_t, which is probably not what was intended. Cast to resource_size_t to avoid the sign extension. This fixes an identical issue as fixed by commit 0b2d70764bb3 ("x86/PCI: Fix Broadcom CNB20LE unintended sign extension") back in 2014. Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension") Fixes: 3f6ea84a3035 ("PCI: read memory ranges out of Broadcom CNB20LE host bridge") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-25Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-10/+4
Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-20Merge branch 'pci/host-vmd'Bjorn Helgaas1-9/+3
- Fix VMD AERSID quirk Device ID matching (Jon Derrick) * pci/host-vmd: x86/PCI: Apply VMD's AERSID fixup generically
2018-10-02x86/PCI: Apply VMD's AERSID fixup genericallyJon Derrick1-9/+3
A root port Device ID changed between simulation and production. Rather than match Device IDs which may not be future-proof if left unmaintained, match all root ports which exist in a VMD domain. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-27x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridgePu Wen1-2/+4
Hygon's PCI vendor ID is 0x1d94, and there are PCI devices 0x1450/0x1463/0x1464 for the host bridge on the Hygon Dhyana platform. Add Hygon Dhyana support to the PCI and northbridge subsystems by using the code path of AMD family 17h. [ bp: Massage commit message, sort local vars into reverse xmas tree order and move the amd_northbridges.num check up. ] Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Cc: helgaas@kernel.org Cc: linux-pci@vger.kernel.org Link: https://lkml.kernel.org/r/5f8877bd413f2ea0833378dd5454df0720e1c0df.1537885177.git.puwen@hygon.cn
2018-09-17x86/PCI: Remove node-local allocation when initialising host controllerPunit Agrawal1-1/+1
Memory for host controller data structures is allocated local to the node to which the controller is associated with. This has been the behaviour since 965cd0e4a5e5 ("x86, PCI, ACPI: Use kmalloc_node() to optimize for performance") where the node local allocation was added without additional context. Drop the node local allocation as there is no benefit from doing so - the usage of these structures is independent from where the controller is located. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2018-06-29PCI: Make early dump functionality genericSinan Kaya2-48/+0
Move early dump functionality into common code so that it is available for all architectures. No need to carry arch-specific reads around as the read hooks are already initialized by the time pci_setup_device() is getting called during scan. Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge branch 'lorenzo/pci/vmd'Bjorn Helgaas1-0/+4
- support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) * lorenzo/pci/vmd: PCI: vmd: Add an additional VMD device id to driver device id table x86/PCI: Add additional VMD device root ports to VMD AER quirk PCI: vmd: Add offset to bus numbers if necessary PCI: vmd: Assign membar addresses from shadow registers PCI: Add Intel VMD devices to pci ids
2018-05-24x86/PCI: Add additional VMD device root ports to VMD AER quirkJon Derrick1-0/+4
VMD devices change the source id of messages from child devices to the VMD endpoint. This patch adds additional VMD root port device ids to the AER quirk which requires walking the bus to determine which devices were throwing the error. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-27x86/PCI: Make pci=earlydump output neatAndy Shevchenko1-14/+5
Currently the early dump of PCI configuration space looks quite unhelpful, e.g. [ 0.000000] 60: [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] 00 [ 0.000000] which makes really hard to get anything out of this. Convert the function to use print_hex_dump() to make output neat. In the result we will have [ 0.000000] 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 which is much, much better. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-02Merge branch 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-44/+8
Pull x86 dma mapping updates from Ingo Molnar: "This tree, by Christoph Hellwig, switches over the x86 architecture to the generic dma-direct and swiotlb code, and also unifies more of the dma-direct code between architectures. The now unused x86-only primitives are removed" * 'x86-dma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrs swiotlb: Make swiotlb_{alloc,free}_buffer depend on CONFIG_DMA_DIRECT_OPS dma/swiotlb: Remove swiotlb_{alloc,free}_coherent() dma/direct: Handle force decryption for DMA coherent buffers in common code dma/direct: Handle the memory encryption bit in common code dma/swiotlb: Remove swiotlb_set_mem_attributes() set_memory.h: Provide set_memory_{en,de}crypted() stubs x86/dma: Remove dma_alloc_coherent_gfp_flags() iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent() iommu/amd_iommu: Use CONFIG_DMA_DIRECT_OPS=y and dma_direct_{alloc,free}() x86/dma/amd_gart: Use dma_direct_{alloc,free}() x86/dma/amd_gart: Look at dev->coherent_dma_mask instead of GFP_DMA x86/dma: Use generic swiotlb_ops x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y) x86/dma: Remove dma_alloc_coherent_mask()
2018-03-27x86/PCI: Fix a potential regression when using dmi_get_bios_year()Andy Shevchenko1-1/+3
dmi_get_bios_year() may return 0 when it cannot parse the BIOS date string. Previously this has been checked in pci_acpi_crs_quirks(). Update the code to restore old behaviour. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Fixes: 69c42d493db4 ("x86/pci: Simplify code by using the new dmi_get_bios_year() helper") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20dma/direct: Handle the memory encryption bit in common codeChristoph Hellwig1-3/+3
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add the memory encryption mask to the non-prefixed versions. Use the __-prefixed versions directly instead of clearing the mask again in various places. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20x86/dma: Use generic swiotlb_opsChristoph Hellwig1-41/+5
The generic swiotlb DMA ops were based on the x86 ones and provide equivalent functionality, so use them. Also fix the sta2x11 case. For that SOC the DMA map ops need an additional physical to DMA address translations. For swiotlb buffers that is done throught the phys_to_dma helper, but the sta2x11_dma_ops also added an additional translation on the return value from x86_swiotlb_alloc_coherent, which is only correct if that functions returns a direct allocation and not a swiotlb buffer. With the generic swiotlb and DMA-direct code phys_to_dma is not always used and the separate sta2x11_dma_ops can be replaced with a simple bit that marks if the additional physical to DMA address translation is needed. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-5-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)Christoph Hellwig1-1/+1
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now functionally equivalent to the x86 nommu dma_map implementation, so switch over to using it. That includes switching from using x86_dma_supported in various IOMMU drivers to use dma_direct_supported instead, which provides the same functionality. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08x86/jailhouse: Enable PCI mmconfig access in inmatesOtavio Pontes1-2/+2
Use the PCI mmconfig base address exported by jailhouse in boot parameters in order to access the memory mapped PCI configuration space. [Jan: rebased, fixed !CONFIG_PCI_MMCONFIG, used pcibios_last_bus] Signed-off-by: Otavio Pontes <otavio.pontes@intel.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: jailhouse-dev@googlegroups.com Cc: linux-pci@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Link: https://lkml.kernel.org/r/2ee9e4401fa22377b3965893a558120f169be82b.1520408357.git.jan.kiszka@siemens.com
2018-03-08PCI: Scan all functions when running over JailhouseJan Kiszka1-1/+3
Per PCIe r4.0, sec 7.5.1.1.9, multi-function devices are required to have a function 0. Therefore, Linux scans for devices at function 0 (devfn 0/8/16/...) and only scans for other functions if function 0 has its Multi-Function Device bit set or ARI or SR-IOV indicate there are more functions. The Jailhouse hypervisor may pass individual functions of a multi-function device to a guest without passing function 0, which means a Linux guest won't find them. Change Linux PCI probing so it scans all function numbers when running as a guest over Jailhouse. This is technically prohibited by the spec, so it is possible that PCI devices without the Multi-Function Device bit set may have unexpected behavior in response to this probe. Originally-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: jailhouse-dev@googlegroups.com Cc: Benedikt Spranger <b.spranger@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Link: https://lkml.kernel.org/r/06e279b2a3e06cf6689ab3975f8ab592bba02362.1520408357.git.jan.kiszka@siemens.com
2018-02-23x86/pci: Simplify code by using the new dmi_get_bios_year() helperAndy Shevchenko3-16/+6
...instead of open coding its functionality. No changes in functionality. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/20180222125923.57385-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-06Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-4/+3
Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+1
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.