aboutsummaryrefslogtreecommitdiffstats
path: root/arch/xtensa/kernel
AgeCommit message (Collapse)AuthorFilesLines
2014-08-14xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_missMax Filippov1-1/+1
Current definition of TLBTEMP_BASE_2 is always 32K above the TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER) to determine TLBTEMP region where the fault happened. The size of the TLBTEMP region is also checked incorrectly: not 64K, but twice data cache way size (whicht may as well be less than the instruction cache way size). Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size. Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or the instruction cache way size, and use it to determine if the second level TLB miss occured in the TLBTEMP region. Practical occurence of page faults in the TLBTEMP area is extremely rare, this code can be tested by deletion of all w[di]tlb instructions in the tlbtemp_mapping region. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DSMax Filippov1-4/+8
With SMP and a lot of debug options enabled task_struct::thread gets out of reach of s32i/l32i instructions with base pointing at task_struct, breaking build with the following messages: arch/xtensa/kernel/entry.S: Assembler messages: arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048' arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040' arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044' Change base to point to task_struct::thread in such cases. Don't use a10 in _switch_to to save/restore prev pointer as a2 is not clobbered. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-14xtensa: fix address checks in dma_{alloc,free}_coherentAlan Douglas1-6/+6
Virtual address is translated to the XCHAL_KSEG_CACHED region in the dma_free_coherent, but is checked to be in the 0...XCHAL_KSEG_SIZE range. Change check for end of the range from 'addr >= X' to 'addr > X - 1' to handle the case of X == 0. Replace 'if (C) BUG();' construct with 'BUG_ON(C);'. Cc: stable@vger.kernel.org Signed-off-by: Alan Douglas <adouglas@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-08-06xtensa: Use get_signal() signal_setup_done()Richard Weinberger1-27/+16
Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-07-15Merge tag 'xtensa-for-next-20140715' of git://github.com/jcmvbkbc/linux-xtensa into for_nextChris Zankel2-24/+138
Xtensa fixes for 3.16: - resolve FIXMEs in double exception handler for window overflow. This fix makes native building of linux on xtensa host possible; - fix sysmem region removal issue introduced in 3.15.
2014-06-09xtensa: add fixup for double exception raised in window overflowMax Filippov2-24/+138
There are two FIXMEs in the double exception handler 'for the extremely unlikely case'. This case gets hit by gcc during kernel build once in a few hours, resulting in an unrecoverable exception condition. Provide missing fixup routine to handle this case. Double exception literals now need 8 more bytes, add them to the linker script. Also replace bbsi instructions with bbsi.l as we're branching depending on 8th and 7th LSB-based bits of exception address. This may be tested by adding the explicit DTLB invalidation to window overflow handlers, like the following: --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4) ENTRY_ALIGN64(_WindowOverflow8) s32e a0, a9, -16 + bbsi.l a9, 31, 1f + rsr a0, ccount + bbsi.l a0, 4, 1f + pdtlb a0, a9 + idtlb a0 + movi a0, 9 + idtlb a0 +1: l32e a0, a1, -12 s32e a2, a9, -8 s32e a1, a9, -12 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-05-13Merge branch 'dt-bus-name' into for-nextRob Herring3-35/+33
2014-05-05Merge tag 'xtensa-next-20140503' of git://github.com/czankel/xtensa-linuxLinus Torvalds3-35/+33
Pull Xtensa fixes from Chris Zankel: - Fixes allmodconfig, allnoconfig builds - Adds highmem support - Enables build-time exception table sorting. * tag 'xtensa-next-20140503' of git://github.com/czankel/xtensa-linux: xtensa: ISS: don't depend on CONFIG_TTY xtensa: xt2000: drop redundant sysmem initialization xtensa: add support for KC705 xtensa: xtfpga: introduce SoC I/O bus xtensa: add HIGHMEM support xtensa: optimize local_flush_tlb_kernel_range xtensa: dump sysmem from the bootmem_init xtensa: handle memmap kernel option xtensa: keep sysmem banks ordered in mem_reserve xtensa: keep sysmem banks ordered in add_sysmem_bank xtensa: split bootparam and kernel meminfo xtensa: enable sorting extable at build time xtensa: export __{invalidate,flush}_dcache_range xtensa: Export __invalidate_icache_range
2014-04-30of/fdt: update of_get_flat_dt_prop in prep for libfdtRob Herring1-1/+1
Make of_get_flat_dt_prop arguments compatible with libfdt fdt_getprop call in preparation to convert FDT code to use libfdt. Make the return value const and the property length ptr type an int. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2014-04-30of/fdt: consolidate built-in dtb section variablesRob Herring1-1/+0
Unify the various architectures __dtb_start and __dtb_end definitions moving them into of_fdt.h. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux@lists.openrisc.net Cc: linux-xtensa@linux-xtensa.org Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2014-04-06xtensa: optimize local_flush_tlb_kernel_rangeMax Filippov1-0/+15
Don't flush whole TLB if only a small kernel range is requested. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: handle memmap kernel optionMax Filippov1-0/+1
This option is useful for reserving memory regions for secondary cores in AMP configurations. Implement the following memmap variants: - memmap=nn[KMG]@ss[KMG]: force usage of a specific region of memory; - memmap=nn[KMG]$ss[KMG]: mark specified memory as reserved; - memmap=nn[KMG]: set end of memory. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: keep sysmem banks ordered in mem_reserveMax Filippov1-1/+1
Rewrite mem_reserve so that it keeps bank order. Also make its return code more traditional. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: split bootparam and kernel meminfoMax Filippov1-34/+9
Bootparam meminfo is a bootloader ABI, kernel meminfo is for the kernel bookkeeping, keep them separate. Kernel doesn't care of memory region types, so drop the type field and don't pass it to add_sysmem_bank. Move kernel sysmem structures and prototypes to asm/sysmem.h and sysmem variable and add_sysmem_bank to mm/init.c Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: export __{invalidate,flush}_dcache_rangeMax Filippov1-0/+6
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-02xtensa: Export __invalidate_icache_rangeGeert Uytterhoeven1-0/+1
When modular code calls flush_icache_range(): ERROR: "__invalidate_icache_range" [drivers/misc/lkdtm.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-03-12Merge branch 'irq/for-gpio' into irq/coreThomas Gleixner5-221/+235
Merge the request/release callbacks which are in a separate branch for consumption by the gpio folks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xtensa: Use irq_set_affinity instead of homebrewn codeThomas Gleixner1-19/+3
There is no point in having an incomplete copy of irq_set_affinity() for the hotplug irq migration code. Use the core function instead and while at it switch to for_each_active_irq() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chris Zankel <chris@zankel.net> Cc: xtensa <linux-xtensa@linux-xtensa.org> Link: http://lkml.kernel.org/r/20140223212736.664624945@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-24Merge tag 'xtensa-for-next-20140221-1' into for_nextChris Zankel1-0/+2
Xtensa fixes for 3.14: - allow booting xtfpga on boards with new uBoot and >128MBytes memory; - drop nonexistent GPIO32 support from fsf variant; - don't select USE_GENERIC_SMP_HELPERS; - enable common clock framework support, set up ethoc clock on xtfpga; - wire up sched_setattr and sched_getattr syscalls. Signed-off-by: Chris Zankel <chris@zankel.net>
2014-02-21xtensa: support common clock frameworkMax Filippov1-0/+2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-29xtensa: fix fast_syscall_spill_registersChris Zankel2-3/+1
The original implementation could clobber registers under certain conditions. The Xtensa processor architecture uses windowed registers and the original implementation was using a4 as a temporary register, which under certain conditions could be register a0 of the oldest window frame, and didn't always restore the content correctly. By moving the _spill_registers routine inside the fast system call, it frees up one more register (the return address is not required anymore) for the spill routine. Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-28xtensa: fix fast_syscall_spill_registersChris Zankel1-209/+174
The original implementation could clobber registers under certain conditions. The Xtensa processor architecture uses windowed registers and the original implementation was using a4 as a temporary register, which under certain conditions could be register a0 of the oldest window frame, and didn't always restore the content correctly. By moving the _spill_registers routine inside the fast system call, it frees up one more register (the return address is not required anymore) for the spill routine. Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-25xtensa: save current register frame in fast_syscall_spill_registers_fixupMax Filippov1-0/+12
We need it saved because it contains a3 where we track which register windows we still need to spill, and fixup handler may call C exception handlers. Also fix comments. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-25xtensa: introduce spill_registers_kernel macroMax Filippov1-12/+48
Most in-kernel users want registers spilled on the kernel stack and don't require PS.EXCM to be set. That means that they don't need fixup routine and could reuse regular window overflow mechanism for that, which makes spill routine very simple. Cc: stable@vger.kernel.org Suggested-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-19xtensa: export ccount_freqMax Filippov1-0/+1
Now that ccount_freq is used in udelay and ndelay it needs to be exported in order to be available to modules. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: remap io area defined in device treeBaruch Siach1-0/+37
Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: support default device tree busesBaruch Siach1-1/+1
This currently includes simple-bus. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: initialize device tree clock sourcesBaruch Siach1-0/+1
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15xtensa: Enable irqs after cpu is set onlineKirill Tkhai1-1/+2
there is a small possibility that wake_up of softirq thread happens between local_irq_enable() and set_cpu_online(). In this case affinity of the thread changes to fallback affinity (i.e. CPU0). This may be a source of problems. The patch kills that possibility. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14xtensa: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: implement CPU hotplugMax Filippov5-4/+229
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add SMP supportMax Filippov8-71/+750
This is largely based on SMP code from the xtensa-2.6.29-smp tree by Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly other Tensilica folks). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: add MX irqchipMax Filippov1-0/+8
MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clear timer IRQ unconditionally in its handlerMax Filippov1-0/+1
PIC irq_ack doesn't clear timer IRQ, because timer interrupt handler usually set up new timer by writing to ccompare register and thus clearing timer IRQ. However timer may not be set up in the IRQ handler, e.g. with tickless idle on SMP, or when CPU is going offline, leaving timer IRQ raised and making do_interrupt attempting to handle it forever. To fix this always write current value of ccompare SR chosen to be linux timer back to that SR on entry to timer interrupt handler. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: clean up do_interrupt/do_IRQMax Filippov2-19/+8
- set up irq registers and call irq_enter/irq_exit once for each kernel entry due to interrupt; - don't attempt to clear current IRQ in the do_interrupt, IRQ handler will take care of it; - find pending interrupt with highest priority before every ISR invocation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move built-in PIC to drivers/irqchipMax Filippov1-107/+30
Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: move init_mmu declaration to mmu_context.hMax Filippov1-6/+1
Secondary CPUs need this declaration to initialize their MMUs. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: call check_s32c1i after trap_initMax Filippov1-11/+7
Otherwise exceptions may occur prior to exception handling mechanism initialization, resulting in silently dead system. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: update clockevent setup for SMPMax Filippov1-25/+29
Provide per-cpu ccount_timer objects and use them appropriately. Extract per-cpu clockevent setup function. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14xtensa: mark ccount as continuous clocksourceBaruch Siach1-0/+1
This allows ccount to be used as highres timer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-11-12Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-41/+14
Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-10-15xtensa: don't use alternate signal stack on threadsBaruch Siach1-1/+1
According to create_thread(3): "The new thread does not inherit the creating thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack corruption among cloned threads), current->sas_ss_size is set to 0 for cloned processes sharing VM with their parent. Don't use the (nonexistent) alternate signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA] Remove non-rt signal handling). Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc. Cc: <stable@vger.kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-15xtensa: fix fast_syscall_spill_registers_fixupMax Filippov1-19/+30
fast_syscall_spill_registers_fixup was not correctly updated by the 'keep a3 and excsave1 on entry to exception handlers' patch: it doesn't preserve a3 that it gets on entry, breaking _spill_registers in case of page fault on stack during register spilling, leading to unhandled exception in kernel mode. Preserve a3 by saving it in the original _spill_registers stack frame's a3 during exception handling and restoring it afterwards. Also fix comments and function bounds annotations. Reported-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-09of: remove early_init_dt_setup_initrd_archRob Herring1-11/+4
All arches do essentially the same thing now for early_init_dt_setup_initrd_arch, so it can now be removed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-09xtensa: use early_init_dt_scanRob Herring1-12/+9
Convert xtensa to use new early_init_dt_scan function. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org
2013-10-09xtensa: use unflatten_and_copy_device_treeRob Herring1-18/+1
Use the common unflatten_and_copy_device_tree to copy the built-in FDT out of init section. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Acked-by: Grant Likely <grant.likely@linaro.org>
2013-09-13Merge tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linuxLinus Torvalds7-344/+320
Pull Xtensa updates from Chris Zankel. * tag 'xtensa-next-20130912' of git://github.com/czankel/xtensa-linux: xtensa: Fix broken allmodconfig build xtensa: remove CCOUNT_PER_JIFFY xtensa: fix !CONFIG_XTENSA_CALIBRATE_CCOUNT build failure xtensa: don't use echo -e needlessly xtensa: new fast_alloca handler xtensa: keep a3 and excsave1 on entry to exception handlers xtensa: enable kernel preemption xtensa: check thread flags atomically on return from user exception
2013-09-06xtensa: Fix broken allmodconfig buildGuenter Roeck1-0/+1
xtansa allmodbuild fails with: arch/xtensa/kernel/xtensa_ksyms.c:129:1: error: '_mcount' undeclared here (not in a function) make[2]: *** [arch/xtensa/kernel/xtensa_ksyms.o] Error 1 make[1]: *** [arch/xtensa/kernel] Error 2 The breakage is due to commit 478ba61af (xtensa: add static function tracer support) which exports _mcount without declaring it. Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-09-06xtensa: remove CCOUNT_PER_JIFFYBaruch Siach2-4/+4
Use ccount_freq directly to make the code a little more readable. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-09-06xtensa: fix !CONFIG_XTENSA_CALIBRATE_CCOUNT build failureBaruch Siach1-2/+2
Commits 925f5532 (xtensa: ccount based clockevent implementation) and e3f43291 (xtensa: ccount based sched_clock) introduced users of ccount_freq. This variable doesn't exist when CONFIG_XTENSA_CALIBRATE_CCOUNT is disabled. Add ccount_freq definition in this case. Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.