Age | Commit message (Collapse) | Author | Files | Lines |
|
The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.
For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.
The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.
As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.
A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
__kernel_timespec and timespec are currently the same type, but once
they are different, the type cast has to be changed here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
statx is available on almost all other architectures but
got missed on sh, so add it now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When I merged this patch, the file was accidentally left intact
instead of being removed, which means any changes to syscall.tbl
have no effect.
Fixes: 2b3c5a99d5f3 ("sh: generate uapi header and syscall table header files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most architectures have assigned a numbers for the seccomp syscall
even when they do not implement it.
m68k is an exception here, so for consistency lets add the number.
Unless CONFIG_SECCOMP is implemented, the system call just
returns -ENOSYS.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A couple of architectures including arm64 already implement the
kexec_file_load system call, on many others we have assigned a system
call number for it, but not implemented it yet.
Adding the number in arch/arm/ lets us use the system call on arm64
systems in compat mode, and also reduces the number of differences
between architectures. If we want to implement kexec_file_load on ARM
in the future, the number assignment means that kexec tools can already
be built with the now current set of kernel headers.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The migrate_pages system call has an assigned number on all architectures
except ARM. When it got added initially in commit d80ade7b3231 ("ARM:
Fix warning: #warning syscall migrate_pages not implemented"), it was
intentionally left out based on the observation that there are no 32-bit
ARM NUMA systems.
However, there are now arm64 NUMA machines that can in theory run 32-bit
kernels (actually enabling NUMA there would require additional work)
as well as 32-bit user space on 64-bit kernels, so that argument is no
longer very strong.
Assigning the number lets us use the system call on 64-bit kernels as well
as providing a more consistent set of syscalls across architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Other architectures commonly use __NR_umount2 for sys_umount,
only ia64 and alpha use __NR_umount here. In order to synchronize
the generated tables, use umount2 like everyone else, and add back
the old name from asm/unistd.h for compatibility.
For shmat, alpha uses the osf_shmat name, we can do the same thing
here, which means we don't have to add an entry in the __IGNORE
list now that shmat is mandatory everywhere
alarm, creat, pause, time, and utime are optional everywhere
these days, no need to list them here any more.
I considered also adding the regular versions of the get*id system
calls that have different names and calling conventions on alpha,
which would further help unify the syscall ABI, but for now
I decided against that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The io_pgetevents system call was added in linux-4.18 but has
no entry for alpha:
warning: #warning syscall io_pgetevents not implemented [-Wcpp]
Assign a the next system call number here.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most architectures have assigned numbers for both seccomp and
perf_event_open, even when they do not implement either.
ia64 is an exception here, so for consistency lets add numbers for both
of them. Unless CONFIG_PERF_EVENTS and CONFIG_SECCOMP are implemented,
the system calls just return -ENOSYS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All architectures should implement these two, so assign numbers
and hook them up on ia64.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Other architectures commonly use __NR_umount2 for sys_umount,
only ia64 and alpha use __NR_umount here. In order to synchronize
the generated tables, use umount2 like everyone else, and add back
the old name from asm/unistd.h for compatibility.
The __IGNORE_* lines are now all obsolete and can be removed as
a side-effect.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that all these wrappers are automatically generated, we can
remove the entire file, and instead point to the regualar syscalls
like all other architectures do.
The 31-bit pointer extension is now handled in the __s390_sys_*()
wrappers.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-6-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Any system call that takes a pointer argument on s390 requires
a wrapper function to do a 31-to-64 zero-extension, these are
currently generated in arch/s390/kernel/compat_wrapper.c.
On arm64 and x86, we already generate similar wrappers for all
system calls in the place of their definition, just for a different
purpose (they load the arguments from pt_regs).
We can do the same thing here, by adding an asm/syscall_wrapper.h
file with a copy of all the relevant macros to override the generic
version. Besides the addition of the compat entry point, these also
rename the entry points with a __s390_ or __s390x_ prefix, similar
to what we do on arm64 and x86. This in turn requires renaming
a few things, and adding a proper ni_syscall() entry point.
In order to still compile system call definitions that pass an
loff_t argument, the __SC_COMPAT_CAST() macro checks for that
and forces an -ENOSYS error, which was the best I could come up
with. Those functions must obviously not get called from user
space, but instead require hand-written compat_sys_*() handlers,
which fortunately already exist.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-5-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
s390 has an almost identical copy of the code in kernel/uid16.c.
The problem here is that it requires calling the regular system calls,
which the generic implementation handles correctly, but the internal
interfaces are not declared in a global header for this.
The best way forward here seems to be to just use the generic code and
delete the s390 specific implementation.
I keep the changes to uapi/asm/posix_types.h inside of an #ifdef check
so user space does not observe any changes. As some of the system calls
pass pointers, we also need wrappers in compat_wrapper.c, which I add
for all calls with at least one argument. All those wrappers can be
removed in a later step.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The sys_ipc() and compat_ksys_ipc() functions are meant to only
be used from the system call table, not called by another function.
Introduce ksys_*() interfaces for this purpose, as we have done
for many other system calls.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Patch series "s390: rework compat wrapper generation".
As promised, I gave this a go and changed the SYSCALL_DEFINEx()
infrastructure to always include the wrappers for doing the
31-bit argument conversion on s390 compat mode.
This does three main things:
- The UID16 rework saved a lot of duplicated code, and would
probably make sense by itself, but is also required as
we can no longer call sys_*() functions directly after the
last step.
- Removing the compat_wrapper.c file is of course the main
goal here, in order to remove the need to maintain the
compat_wrapper.c file when new system calls get added.
Unfortunately, this requires adding some complexity in
syscall_wrapper.h, and trades a small reduction in source
code lines for a small increase in binary size for
unused wrappers.
- As an added benefit, the use of syscall_wrapper.h now makes
it easy to change the syscall wrappers so they no longer
see all user space register contents, similar to changes
done in commits fa697140f9a2 ("syscalls/x86: Use 'struct pt_regs'
based syscall calling convention for 64-bit syscalls") and
4378a7d4be30 ("arm64: implement syscall wrappers").
I leave the actual implementation of this for you, if you
want to do it later.
I did not test the changes at runtime, but I looked at the
generated object code, which seems fine here and includes
the same conversions as before.
This patch(of 5):
The sys_personality function is not meant to be called from other system
calls. We could introduce an intermediate ksys_personality function,
but it does almost nothing, so this just moves the implementation into
the caller.
Link: https://lore.kernel.org/lkml/20190116131527.2071570-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190116131527.2071570-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
|
|
UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software. Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique. Linus Torvalds argued:
"Do we actually need this?
I'd rather let it bitrot, and just let it return random versions. It
will just start again at 2.4.60, won't it?
Anybody who uses UNAME26 for a 5.x kernel might as well think it's
still 4.x. The user space is so old that it can't possibly care about
differences between 4.x and 5.x, can it?
The only thing that matters is that it shows "2.4.<largeenough>",
which it will do regardless"
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.
While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.
Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.
The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support")
For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.
There are even suspend/resume hooks in this driver since:
commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Remove the stale comment at the end of this driver stating that all
the above does not exist yet.
Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().
PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.
Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.
Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.
Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.
This code is serialized by kvm->lock.
Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.
Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.
Fix this by adding suffix ULL to integer 0xf.
Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To 2.16
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently we account for credits in the thread initiating a request
and waiting for a response. The demultiplex thread receives the response,
wakes up the thread and the latter collects credits from the response
buffer and add them to the server structure on the client. This approach
is not accurate, because it may race with reconnect events in the
demultiplex thread which resets the number of credits.
Fix this by moving credit processing to new mid callbacks that collect
credits granted by the server from the response in the demultiplex thread.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.
Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If maxBuf is small but non-zero, it could result in a zero sized lock
element array which we would then try and access OOB.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This addresses some compile warnings that you can
see depending on configuration settings.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently we hide EINTR code returned from sock_sendmsg()
and return 0 instead. This makes a caller think that we
successfully completed the network operation which is not
true. Fix this by properly returning EINTR to callers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
In kexec_file_load, kaslr-seed property of the current dtb will be deleted
any way before setting a new value if possible. It doesn't matter whether
it exists in the current dtb.
So "ret" should be reset to 0 here.
Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback()
expects the opaque pointer argument to be a PCI bus device. At the
moment rc_dma_get_range() passes the PCI endpoint instead of the bus,
and we've been lucky to have pci_domain_nr(ptr) return 0 instead of
crashing. Pass the bus device to iort_scan_node().
Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c.
Turns out it is not needed at all, a fix for clang was made and accepted
upstream in that project that makes this change unnecessary. So revert
it.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling. Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Tegra194 supports maximum 64K Bytes transfer per packet.
Tegra186 and prior supports maximum 4K Bytes transfer per packet.
This patch fixes this payload difference between Tegra194 and prior
Tegra chipsets using separate i2c_adapter_quirks.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.
If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
[wsa: minor grammar updates to commit message]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5")
the DRM_MSM symbol can be selected by SOC_IMX5 causing the following
error when building imx_v6_v7_defconfig:
In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0:
../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr':
../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function)
return -ENODEV;
Include the <linux/err.h> header file to fix this problem.
Reported-by: kernelci.org bot <bot@kernelci.org>
Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|